2-6609115-0

## **GG/HG Series** 

## **Smallest Filtered Power Entry Modules with Metric Fuseholders** 

## **UL Recognized CSA Certified VDE Approved SEV on 3 & 6 EGG1 - 1 & 2 3 & 6 EGG1C - 1 & 2** 

**==> picture [209 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
GG8<br>HG1/GG1<br>**----- End of picture text -----**<br>


## **GG Series** 

GG series power entry modules combine the functions of a general purpose RFI filter with an IEC power cord connector and single or dual metric fusing, in the smallest possible panel space.  A choice of .250” terminals or wire leads is available for the load-side terminations. 

For maximum cost effectiveness, 6 amp models should be used for all applications rated 6 amps or less, unless the higher performance of the 3 amp models, or the much higher performance of the 1 amp models, is needed. 

Models with C-suffix additionally incorporate a ground choke[1] to isolate the equipment chassis from external ground at RF frequencies.* 

## **HG Series** 

A medical version of our GG series, these filters offer the same compact design but reduce the line-to-ground capacitance in order to meet UL 2601 patient care requirements. 

|RFI Filter<br>Type|Current<br>Rating<br>3|Metric<br>Fuseholders|
|---|---|---|
|General Purpose2<br>General Purpose<br>General Purpose<br>General Purpose|1<br>1<br>1<br>1|1<br>2<br>1<br>2|
|General Purpose<br>General Purpose<br>General Purpose<br>General Purpose|3<br>3<br>3<br>3|1<br>2<br>1<br>2|
|General Purpose<br>General Purpose<br>General Purpose<br>General Purpose|6<br>6<br>6<br>6|1<br>2<br>1<br>2|
|Medical<br>Medical<br>Medical|1<br>3<br>6|2<br>2<br>2|



1 Ground choke available on all general purpose models.  Add suffix (1EGG1C-1). 

- 3 Current rating @ 120 VAC and 250 VAC. 

## **Electrical Schematics** 

## **HG/GG** 

**==> picture [182 x 78] intentionally omitted <==**

**----- Start of picture text -----**<br>
Line Load<br>(Note 1) (Note 2)<br>Note 1:  Depicts single fuse for -1 models.<br>Note 2:  For HG delete line-to-ground capacitors.<br>Resistor location for reference only.<br>**----- End of picture text -----**<br>


> 2 General purpose filter for susceptibility applications. * GC models only. Consult your local Corcom sales representative for pricing. 

**GG-C** Line Load (Note 1) (Note 2) **CAUTION: Do not attempt to operate a single-fused model without the fuse door in place!** PO 

**GG 88** 

Libertyville, IL  (847) 680-7400 

**GG 89** 

## **Series GG/HG** 

## **Specifications** 

**==> picture [237 x 182] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|Maximum leakage current, each|HG|GG|
|line-to-ground|@120 VAC 60Hz|2µA|.25mA|
|@250 VAC 50Hz|tT|5µA|.42mA|
|Hipot rating (one minute):|
|line-to-ground|1550 VAC|
|line-to-line|1450 VDC|
|Operating frequency:|50/60 Hz|
|Rated voltage:|120/250 VAC|
|Fuse (not included):|Accepts one 5 x 20mm fuse|
|(-1 models) or|
|two 5 x 20mm fuses (-2 models)|
|Terminals:|.250 (6.35mm) terminals (G1)|
|5” wire leads (EGG8)|

**----- End of picture text -----**<br>


## **Minimum** insertion loss in dB: 

## Line-to-ground in 50 ohm circuit 

**==> picture [229 x 122] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Current|Frequency-MHz|
|Rating|.01|.05|.10|.15|.5|1|5|10|30|
|GG Models|
|1A|12|23|29|32|41|47|50|50|55|
|3A|–|10|15|19|30|36|48|50|53|
|6A|–|1|4|10|16|22|36|40|50|
|HG Models|
|1A|12|23|29|32|40|40|28|22|18|
|3A|–|10|15|19|25|26|22|21|21|
|6A|–|4|10|14|18|18|14|14|14|

**----- End of picture text -----**<br>


## **Case Dimensions** 

Metric shown in italics. 

**==> picture [233 x 147] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||
|---|---|---|---|---|
|A|B|C|D|E|
|Part No.|
|(max)|(max)|(max)|±|.015|
|±|.38|
|1.66|1.13|1.29|1.417|1.76|
|EGG1-1/EGG1-2|
|42.2|28.7|32.8|33.3|44.7|
|2.02|1.13|1.29|1.417|1.76|
|EGG8-1/EGG8-2|
|51.1|28.7|32.8|33.3|44.7|
|2.02|1.13|1.29|1.417|1.76|
|EGG1C-1/EGG1C-2|
|62.2|28.7|32.8|33.3|44.7|
|2.02|1.13|1.29|1.417|1.76|
|EGG8C-1/EGG8C-2|
|51.1|28.7|32.8|33.3|44.7|

**----- End of picture text -----**<br>


*HG 1-2 models same as GG 1-2. 

## **Case Styles** 

Metric shown in italics. 

**GG1/HG1** 

## Line-to-line in 50 ohm circuit 

**==> picture [498 x 276] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Current|Frequency-MHz|
|Rating|.01|.15|.5|1|3|5|10|30|Typical dimensions|
|GG Models|Terminals:|6.35.250.250|(3)|Holes: .1.807.1.8071.80707|Dia.   Mounting holes:|3.20.126.126126|Dia. (2)|
|1A|1|3|14|23|41|47|50|44|
|3A|1|2|11|14|25|38|44|40|GG8|
|6A|1|2|10|13|23|33|39|42|
|HG Models|
|1A|1|3|26|35|35|35|27|20|
|3A|1|2|30|30|30|30|30|30|
|6A|1|2|30|30|30|30|30|30|
|ee|
|on|=|
|Recommended Panel Cutout|
|Front or back mounting. Metric shown in italics.|
|.138|
|Dia|
|1.3|3.5|
|33|
|1.14|
|.6|
|29|R|[.138]|3.5|15.2|
|1.417|Typical dimensions|
|di|36|Wire leads:|1275.0|Min.|i|Mounting holes:|3.20.126|Dia.(2)|

**----- End of picture text -----**<br>


Typical dimensions Terminals: 6.35.250.250 (3) Holes: .1.807.1.8071.80707 Dia.   Mounting holes: 3.20.126.126126 Dia. (2) 

**==> picture [372 x 36] intentionally omitted <==**

**----- Start of picture text -----**<br>
_cor e o m<br>**----- End of picture text -----**<br>


Libertyville, IL  (847) 680-7400