2-1415390-1 .

General Purpose Low Power PCB Relays 

**SCHRACK** 

## **Miniature PCB Relay PE bistable** 

## n **Polarized bistable version** 

## n **1 pole 5 A, 1 form C (CO) or 6A, 1 form A (NO) contact** 

> n **Sensitive version with 200mW coil** 

> n **Ambient temperature 70°C** 

## n **Low height 10.0mm** 

> n **Plastic materials according to IEC 60335-1 (domestic appliances)** 

## Typical applications 

Room thermostats, electricity meters, home automation, white goods, battery powered controls. 

## ~~**Approvals**~~ 

VDE Cert. No. 40011901 (for AgNi90/10 contacts only), UL E214025 Technical data of approved types on request. 

## Z 

## ~~**Contact Data**~~ 

## ~~**Coil Data**~~ 

**==> picture [523 x 328] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Contact arrangement|1 form C (CO) or 1 form A (NO)|Magnetic system|bistable, polarized|
|Rated voltage|250VAC|Coil voltage range|2.2 to 48VDC|
|Max. switching voltage|400VAC|Operative range, IEC 61810|2|
|Rated current|5A (CO - types)|Reset voltage max., % of rated coil voltage|120% at -40°C|
|6A (NO - AgNi - types)|Min./Max. energization duration|20ms|[1)]|/1min at <10% duty factor|
|Breaking capacity max.|1250VA (CO - types)|1) Information on reduced pulse duration with higher energization voltages on demand.|
|-|
|1500VA (NO AgNi|types)|Coil versions, bistable 1 coil|
|Contact material|AgNi 90/10, AgSnO2|Coil|Rated|Set|Reset|Coil|Rated coil|
|AgNi 90/10 HTV (gold plated)|code|[2)]|voltage|voltage|voltage|resistance|power|
|Frequency of operation, with/without load|360/72000 ops/h|VDC|VDC|VDC|Ω±10%|mW|
|Set/reset time|typ. 8/8ms|F02|H02|2.2|1.65|1.65|22|220|
|Bounce time, form A/form B|4/7ms|F03|H03|3|2.25|2.25|41|220|
|Contact ratings|F05|H05|5|3.75|3.75|125|200|
|Type|Contact  Load|Cycles|F06|H06|6|4.5|4.5|180|200|
|IEC 61810|F12|H12|12|9.0|9.0|650|222|
|PE014|C (CO)|5A, 250VAC, cos|φ|=1, 85°C|100x10|[3]|F24|H24|24|18.0|18.0|2750|209|
|PE014|A (NO)|5A, 30VDC, 0 ms, 85°C|100x10|[3 ]|2) Coil codes F.. and H..have opposite polarity; refer to coil operation table.|
|PE034|NO|6A, 250VAC cos|φ|=1, 70°C|20x10|[3 ]|All figures are given for coil without pre-energization, at ambient temperature +23°C.Other coil voltages on request.|
|UL 508|Coils - operation|
|PE013|C (CO)|5A, 240VAC, resistive, 85°C|30x10|[3]|Version|F..|H..|
|PE014|NO (of CO) B300|6.000|Coil terminals|A1|A2|A1|A2|
|PE514|NO (of CO) R300|6.000|Operate|+|-|-|+|
|PE514|C (CO)|5A, 250VAC, general purpose, 85°C|6.000|Reset|-|+|+|-|
|PE033|N (NO)|5A, 240VAC, resistive, 85°C|50x10|[3]|Contact position not defned at deliveryned at delivery|
|PE014|C/A/B|5A, 250VAC, resistive, 85°C|100x10|[3 ]|
|PE034|A (NO)|6A, 250VAC, resistive, 70°C|100x10|[3 ]|~|Coil|operating|range|
|8)|bistable,|
|Mechanical endurance|>5x10|[6]|operations.|
|OE|216|max|SET|O/5A1 coil|r_|Pf|||

**----- End of picture text -----**<br>


**==> picture [254 x 56] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||
|---|---|---|---|---|
|Version|F..|H..|
|Coil terminals|A1|A2|A1|A2|
|Operate|+|-|-|+|
|Reset|-|+|+|-|
|Contact position not defned at deliveryned at delivery|

**----- End of picture text -----**<br>


1 

Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

07-2017, Rev. 0717 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 

General Purpose Low Power PCB Relays 

**SCHRACK** 

## **Miniature PCB Relay PE bistable** (Continued) 

## ~~**Insulation Data**~~ 

|~~**Insulation Data**~~||
|---|---|
|Initial dielectric strength||
|between open contacts|1000Vrms|
|between contact and coil|4000Vrms|
|Initial insulation resistance||
|open contact circuit|>10x109Ω|
|coil-contact circuit|>10x109Ω|
|Clearance/creepage||
|between contact and coil|≥3.2/4mm|
|Material group of insulation parts|IIIa|
|Tracking index of relay base|PTI250V|



**==> picture [259 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
PCB Layout / terminal assignment<br>Bottom view on solder pins<br>1 form C (CO)  version 1 form A (NO)  version<br>**----- End of picture text -----**<br>


|~~**Other Data**~~||
|---|---|
|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content||
|refer to the Product Compliance Support Center at|refer to the Product Compliance Support Center at|
|www.te.com/customersupport/rohssupportcenter||
|Resistance to heat and fire|according EN60335, par.30|
|Ambient temperature|-40 to 85°C|
||70°C at 100% duty factor|
|Category of environmental protection||
|IEC 61810|RTII - flux proof|
||RTIII - wash tight on request|
|Shock resistance (destructive)|>100g|
|Shock resistance (functional/ 11ms), form A/form B  >15/5g||
|Terminal type|PCB-THT|
|Resistance to soldering heat THT||
|IEC 60068-2-20|260°C/10s (flux proof version)|
||260°C/5s (wash tight version)|
|Packaging/unit|tube/25 pcs., box/500 pcs.|
||**Dimensions**|



|**Product code structure**|**Product code structure**|||Typical product code<br>**PE**|Typical product code<br>**PE**|**0**|**0**|**1**<br>**4**|**F12**|
|---|---|---|---|---|---|---|---|---|---|
|**Type**||||||||||
|**PE**Miniature PCB Relay PE bistable||||||||||
|**Version**||||||||||
|**0**<br>Flux proof||**5**|Wash tight (on request)|||||||
|**Contact configuration**||||||||||
|**1**<br>1 form C (CO) contact||**3**|1 form A (NO) contact|||||||
|**Contact material**||||||||||
|**4**<br>AgNi  90/10||**3**|AgSnO2|**5**|**5**AgNi 90/10 HTV (gold plated)|||||
|**Coil**||||||||||
|Coil code: please refer to coil versions table||Coil code: please refer to coil versions table||||||||
|**Product code**|**Version**|**Contacts**||**Contact material**|**Coil**||**Part number**|||
|PE514F03<br>PE014F02<br>PE014F03<br>PE014F05<br>PE014F06<br>PE014F12<br>PE014F24|wash tight<br>flux proof|1 form C<br>1 CO contact||AgNi  90/10|bistable<br>polarity F|||2-1415539-0<br>9-1415389-1<br>1415390-1<br>1-1415390-1<br>2-1415390-1<br>3-1415390-1<br>5-1415390-1||
|PE014H02<br>PE014H03<br>PE014H05<br>PE014H06<br>PE014H12<br>PE014H24|||||bistable<br>polarity H|||7-1415390-1<br>8-1415390-1<br>9-1415390-1<br>1415391-1<br>1-1415391-1<br>2-1415391-1||
|PE015F05||1 form C|1 form C|AgNi 90/10 HTV|bistable|||3-1415542-4||
|PE034F09<br>PE034F12||1formA<br>1 NO contact||AgNi 90/10|polarity F|||1415543-7<br>1415544-4|44-4|



Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, terms of the disclaimer and all chapters of application notes and all specifications are the ‘Definitions’ section, available at subject to change. http://relays.te.com/definitions 

2 

07-2017, Rev. 0717 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company.