1839230000

**Data sheet** ~~ell~~ 

## **LUP 12.70/07/90 3.2SN GY BX** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

www.weidmueller.com 

## **Product image** 

This PCB terminal provides connections for 1000 V, 76 A and 16 mm² conductor cross-section with proven clamping yoke connection at 12.7 mm pitch, conductor outlet direction in 90° design. 

## **General ordering data** 

|Version|Printed circuit board terminals, 12.70 mm,|
|---|---|
||Number of poles: 7, 90°, Solder pin length (l):|
||3.2 mm, tinned, Pebble grey, Clamping yoke|
||connection, Clampingrange, max. : 16 mm², Box|
|Order No.|1839230000|
|Type|LUP 12.70/07/90 3.2SN GY BX|
|GTIN(EAN)|4032248349739|
|Qty.|20pc(s).|
|Product data|IEC: 1000 V / 76 A / 0.5 - 16 mm²|
||UL: 600 V/65 A/AWG 22 - AWG 6|
|Packaging|Box|



Creation date December 5, 2023 8:48:31 AM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

1 

**Data sheet** — **LUP 12.70/07/90 3.2SN GY BX** 

## **Weidmüller Interface GmbH & Co. KG** 

Klingenbergstraße 26 D-32758 Detmold Germany 

## **Technical data** ~~Ld~~ 

~~a~~ www.weidmueller.com 

## **Dimensions and weights** 

|Depth|25.1 mm|Depth(inches)|0.988 inch|
|---|---|---|---|
|Height|34.7 mm|Height(inches)|1.366 inch|
|Height of lowest version|31.5 mm|Width|87.16 mm|
|Width (inches)|3.431 inch|Net weight|72.65 g|
|**System parameters**||||
|Product family|OMNIMATE Power - series|Wire connection method||
||LUP||Clamping yoke connection|
|Mountingonto the PCB|THT solder connection|Conductor outlet direction|90°|
|Pitch in mm(P)|12.7 mm|Pitch in inches(P)|0.5 inch|
|Number ofpoles|7|Pin seriesquantity|1|
|Fitted bycustomer|Yes|Number of rows|1|
|Max. adjacentpolesper row|12|Solderpin length(l)|3.2 mm|
|Solderpin dimensions|1.2 x 1.2 mm|Solder eyelet hole diameter(D)|1.6 mm|
|Solder eyelet hole diameter tolerance(D)<br>+ 0,1 mm||Number of solderpinsperpole|2|
|Screwdriver blade|1.0 x 5.5,PZ 2|Screwdriver blade standard|DIN 5264|
|Tighteningtorque,min.|1.2 Nm|Tighteningtorque,max.|1.5 Nm|
|Clampingscrew|M 4|Strippinglength|12 mm|
|L1 in mm|76.2 mm|L1 in inches|3 inch|
|Touch-safe protection acc. to DIN VDE|IP20 plugged/ IP10|Touch-safe protection acc. to DIN VDE||
|0470|unplugged|57 106|Safe from finger touch|
|Protection degree|IP20|Volume resistance|0.50 mΩ|
|**Material data**||||
|Insulatingmaterial|Wemid(PA)|Colour|Pebblegrey|
|Colour chart(similar)|RAL 7032|Insulatingmaterialgroup|I|
|Comparative TrackingIndex(CTI)|≥ 600|UL 94 flammabilityrating|V-0|
|Contact material|E-Cu|Contact surface|tinned|
|Layer structure of solder connection|1.5...3 µm Ni / 4...6 µm Sn|Storage temperature, min.||
||matt||-40 °C|
|Storage temperature,max.|70 °C|Operatingtemperature,min.|-50 °C|
|Operatingtemperature,max.|120 °C|Temperature range,installation,min.|-25 °C|
|Temperature range, installation, max.|120 °C|||



## **Conductors suitable for connection** 

|Clampingrange,min.|0.13 mm²|
|---|---|
|Clampingrange,max.|16 mm²|
|Wire connection cross section AWG,|AWG 22|
|min.||
|Wire connection cross section AWG,|AWG 6|
|max.||
|Solid,min. H05(07)V-U|0.5 mm²|
|Solid,max. H05(07)V-U|16 mm²|
|Stranded,min. H07V-R|6 mm²|
|Stranded,max. H07V-R|16 mm²|
|Flexible,min. H05(07)V-K|0.5 mm²|
|Flexible,max. H05(07)V-K|16 mm²|
|w. plastic collar ferrule, DIN 46228 pt 4,|2.5 mm²|
|min.||
|w. plastic collar ferrule, DIN 46228 pt 4,|10 mm²|
|max.||
|w. wire end ferrule, DIN 46228 pt 1,|2.5 mm²|
|min.||



Creation date December 5, 2023 8:48:31 AM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

2 

**Data sheet** — **LUP 12.70/07/90 3.2SN GY BX** 

## **Weidmüller Interface GmbH & Co. KG** 

Klingenbergstraße 26 D-32758 Detmold Germany 

|**LUP 12.70/07/90 3.2SN GY BX**|**LUP 12.70/07/90 3.2SN GY BX**|**LUP 12.70/07/90 3.2SN GY BX**|**LUP 12.70/07/90 3.2SN GY BX**|**Weidmüller Interface GmbH & Co. KG**<br>Klingenbergstraße 26<br>D-32758 Detmold<br>Germany|**Weidmüller Interface GmbH & Co. KG**<br>Klingenbergstraße 26<br>D-32758 Detmold<br>Germany|
|---|---|---|---|---|---|
|**Technical data**<br>~~Ld~~||||www.weidmueller.com<br>~~a~~||
||w. wire end ferrule, DIN 46228 pt 1,|w. wire end ferrule, DIN 46228 pt 1,|10 mm²|||
||max.|||||
||Plug gauge in accordance with EN||5.4 mm x 5.1 mm; 5.3 mm|||
||60999 a x b;ø|||||
||Clampable conductor||Cross-section for conductor connection|Cross-section for conductor connection<br>Type<br>fine-wired||
|||||nominal<br>2.5 mm²||
|||wire end ferrule<br>Strippinglength<br>nominal<br>12 mm<br>Recommended wire-<br>end ferrule<br>H2,5/12<br>Strippinglength<br>nominal<br>14 mm<br>Recommended wire-<br>end ferrule<br>H2,5/19D BL<br>Cross-section for conductor connection<br>Type<br>fine-wired<br>nominal<br>4 mm²<br>wire end ferrule<br>Strippinglength<br>nominal<br>12 mm<br>Recommended wire-<br>end ferrule<br>H4,0/12<br>Strippinglength<br>nominal<br>14 mm<br>Recommended wire-<br>end ferrule<br>H4,0/20D GR<br>Cross-section for conductor connection<br>Type<br>fine-wired<br>nominal<br>6 mm²<br>wire end ferrule<br>Strippinglength<br>nominal<br>12 mm<br>Recommended wire-<br>end ferrule<br>H6,0/12<br>Strippinglength<br>nominal<br>14 mm<br>Recommended wire-<br>end ferrule<br>H6,0/20 SW<br>~~ee~~<br>~~——~~<br>PF<br>~~} —___1___~~<br>~~——~~<br>PF<br>~~/}—______l__~~<br>~~——~~||||
||||Cross-section for conductor connection<br>Type<br>fine-wired<br>nominal<br>10 mm²<br>wire end ferrule<br>Strippinglength<br>nominal<br>15 mm<br>Recommended wire-<br>end ferrule<br>H10,0/22 EB<br>Strippinglength<br>nominal<br>12 mm<br>Recommended wire-<br>end ferrule<br>H10,0/12<br>~~eee~~<br>~~/} —_____1____~~<br>~~=~~|||
||Reference text||Length of ferrules is to be chosen depending on the product and the rated voltage., The outside|||
||||diameter of the plastic collar should not be larger than the pitch (P)|diameter of the plastic collar should not be larger than the pitch (P)||
||**Rated data acc. to IEC**|||||
||tested acc. to standard|||Rated current, min. number of poles||
||||IEC 60664-1,IEC 61984|(Tu=20°C)<br>76 A||
||Rated current, max. number of poles|||Rated current, min. number of poles||
||(Tu=20°C)||74 A|(Tu=40°C)<br>76 A||
||Rated current, max. number of poles|||Rated voltage for surge voltage class /||
||(Tu=40°C)||64 A|pollution degree II/2<br>1,000 V||
||Rated voltage for surge voltage class /|||Rated voltage for surge voltage class /||
||pollution degree III/2||1,000 V|pollution degree III/3<br>1,000 V||
||Rated impulse voltage for surge voltage|||Rated impulse voltage for surge voltage||
||class/ pollution degree II/2||6 kV|class/ pollution degree III/2<br>8 kV||
||Rated impulse voltage for surge voltage|||Short-time withstand current resistance||
||class/ contamination degree III/3||8 kV|1 x 1s with 700 A||



Creation date December 5, 2023 8:48:31 AM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

3 

**Data sheet** 

## **LUP 12.70/07/90 3.2SN GY BX** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

~~a~~ www.weidmueller.com 

|||||Germany<br>www.weidmueller.com|www.weidmueller.com|
|---|---|---|---|---|---|
|**Technical data**<br>~~ass~~||||www.weidmueller.com<br>~~a~~|www.weidmueller.com<br>~~a~~|
||**Rated data acc. to CSA**|||||
||Institute (CSA)||Co|Certificate No. (CSA)|200039-1198743|
||Rated voltage(UsegroupB/CSA)||600 V|Rated voltage(UsegroupC/CSA)|600 V|
||Rated current(UsegroupB/CSA)||65 A|Rated current(UsegroupC/CSA)|65 A|
||Wire cross-section,AWG,min.||AWG 22|Wire cross-section,AWG,max.|AWG 6|
||Reference to approval values||Specifications are|||
||||maximum values, details -|||
||||see approval certificate.|||
||**Rated data acc. to UL 1059**|||||
||Institute (cURus)|cWAkus||Certificate No. (cURus)|E60693|
||Rated voltage(UsegroupB/UL 1059)||600 V|Rated voltage(UsegroupC/UL 1059)|600 V|
||Rated current(UsegroupB/UL 1059)||65 A|Rated current(UsegroupC/UL 1059)|65 A|
||Wire cross-section,AWG,min.||AWG 22|Wire cross-section,AWG,max.|AWG 6|
||Reference to approval values||Specifications are|||
||||maximum values, details -|||
||||see approval certificate.|||
||**Packing**|||||
||Packaging||Box|VPE length|309 mm|
||VPE width||96 mm|VPE height|71 mm|
||**Type tests**|||||
|||||||
||Test: Durability of markings||Standard|DIN EN 61984 section 7.3.2 / 09.02 taking||
|||||pattern from DIN EN 60068-2-70|attern from DIN EN 60068-2-70/07.96|
||||Test|mark of origin, type identification, type of||
|||||material,approval markingUL,durability||
||||Evaluation|available||



Creation date December 5, 2023 8:48:31 AM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

4 

**Data sheet** — **LUP 12.70/07/90 3.2SN GY BX** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

|**Technical data**<br>~~Ld~~|www.weidmueller.com<br>~~a~~|www.weidmueller.com<br>~~a~~|
|---|---|---|
|Test: Clampable cross section|Standard<br>DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN<br>EN 60947-1 section 8.2.4.5.1/12.02||
||Conductor type|Type of conductor<br>and conductor cross-<br>section<br>solid 0.5 mm²|
|||Type of conductor<br>and conductor cross-<br>section<br>stranded 0.5 mm²|
|||Type of conductor<br>and conductor cross-<br>section<br>solid 16 mm²|
|||Type of conductor<br>and conductor cross-<br>section<br>stranded 16 mm²|
|||Type of conductor<br>and conductor cross-<br>section<br>AWG 22/1|
|||Type of conductor<br>and conductor cross-<br>section<br>AWG 22/19|
|||Type of conductor<br>and conductor cross-<br>section<br>AWG 6/7|
|||Type of conductor<br>and conductor cross-<br>section<br>AWG 6/19|
||Evaluation<br>passed||
|Test for damage to and accidental<br>loosening of conductors|Standard<br>DIN EN 60999-1 section 9.4/12.00||
||Requirement<br>0.2 kg||
||Conductor type|Type of conductor<br>and conductor cross-<br>section<br>AWG 22/1|
|||Type of conductor<br>and conductor cross-<br>section<br>AWG 22/19|
||Evaluation<br>passed||
||Requirement<br>0.3 kg||
||Conductor type|Type of conductor<br>and conductor cross-<br>section<br>solid 0.5 mm²|
|||Type of conductor<br>and conductor cross-<br>section<br>stranded 0.5 mm²|
||Evaluation<br>passed||
||Requirement<br>2.9 kg||
||Conductor type|Type of conductor<br>and conductor cross-<br>section<br>solid 16 mm²|
|||Type of conductor<br>and conductor cross-<br>section<br>stranded 16 mm²|
|||Type of conductor<br>and conductor cross-<br>section<br>AWG 6/7|
||Evaluation<br>passed||



Creation date December 5, 2023 8:48:31 AM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

5 

**Data sheet** — **LUP 12.70/07/90 3.2SN GY BX** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

## ~~a~~ www.weidmueller.com 

## **Technical data** ~~Ld~~ 

Pull-out test 

|Pull-out test|Standard<br>DIN EN 60999-1 section 9.5/12.00|Standard<br>DIN EN 60999-1 section 9.5/12.00|
|---|---|---|
||Requirement<br>≥15 N||
||Conductor type|Type of conductor<br>and conductor cross-<br>section<br>AWG 22/1|
|||Type of conductor<br>and conductor cross-<br>section<br>AWG 22/19|
||Evaluation<br>passed||
||Requirement<br>≥20 N||
||Conductor type|Type of conductor<br>and conductor cross-<br>section<br>H05V-U0.5|
|||Type of conductor<br>and conductor cross-<br>section<br>H05V-K0.5|
||Evaluation<br>passed||
||Requirement<br>≥100 N||
||Conductor type|Type of conductor<br>and conductor cross-<br>section<br>H07V-K16|
|||Type of conductor<br>and conductor cross-<br>section<br>H07V-U16|
|||Type of conductor<br>and conductor cross-<br>section<br>AWG 6/7|
||Evaluation<br>passed||



## **Important note** 

IPC conformity Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Notes • Additional variants on request 

- Rated current related to rated cross-section & min. No. of poles. 

- Wire end ferrule without plastic collar to DIN 46228/1 

- Wire end ferrule with plastic collar to DIN 46228/4 

- The data given under CSA relates to a cUL approval - E60693 

- P on drawing = pitch 

- Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. 

- Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months 

Creation date December 5, 2023 8:48:31 AM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

6 

**Data sheet** 

**LUP 12.70/07/90 3.2SN GY BX** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

## **Technical data** ~~ass~~ 

~~a~~ www.weidmueller.com 

## **Approvals** 

|**Approvals**||
|---|---|
|Approvals|@cALis|
|ROHS|Conform|
|UL File Number Search|UL Website|
|Certificate No. (cURus)|E60693|



## **Downloads** 

|Approval/Certificate/Document of||
|---|---|
|Conformity|Declaration of the Manufacturer|
|EngineeringData|CAD data--STEP|
|Product Change Notification|20220201 Visual change OMNIMATE® Power PCB terminal blocks and connectors|
||20220201 Visuelle Änderung OMNIMATE® Power Leiterplattenklemmen und-steckverbinder|
|User Documentation|QR-Code product handling video|
|Catalogues|Catalogues in PDF-format|
|Brochures|FL DRIVES EN|
||MB DEVICE MANUF. EN|
||FL DRIVES DE|
||FL APPL_INVERTER EN|
||FL_BASE_STATION_EN|
||FL ELEVATOR EN|
||FL POWER SUPPLY EN|
||FL 72H SAMPLE SER EN|
||PO OMNIMATE EN|



Creation date December 5, 2023 8:48:31 AM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

7 

**Data sheet** 

## **LUP 12.70/07/90 3.2SN GY BX** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

www.weidmueller.com 

## **Drawings** 

## **Product image** 

**Graph** 

## **Dimensional drawing** 

**Graph** 

Creation date December 5, 2023 8:48:31 AM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

8 

**Data sheet** — **LUP 12.70/07/90 3.2SN GY BX** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

## **Accessories** ~~Ld~~ 

~~a~~ www.weidmueller.com 

## **Intermediate plates** 

## **The maximum voltage is based on the minimum distance.** 

Intermediate plates increase the creepage and clearance distances between different potentials and permit higher rated voltages or a clear separation, e.g. between mains and low voltages or different protection zones. The dovetail joint enables easy installation and guarantees a secure fit. Other characteristics include: 

- Pitch extended by 1.27 or 2.54mm - all other combinations possible 

- Colour coding ensures visual differentiation 

- Different geometries for standard designs. 

Incomplete individual assemblies avoided because separate terminal blocks combine to form a single holistic unit. Ready-assembled on request. The advantages: efficient processing, increased stability, improved reliability. 

## **General ordering data** 

|Type|LUP ZP 2.54 GY|Version|Product data|Packaging|
|---|---|---|---|---|
|Order No.|1837580000|Printed circuit board terminals, Accessories, Intermediate plate, Pebble||Box|
|GTIN (EAN)|4032248347315|grey, Number of poles: 1|||
|Qty.|50 pc(s).||||



## **Additional accessories** 

## **No task is too small when creating the perfect solution.** 

Connections form just one part of the overall process. Small details are often the key to the perfect solution in applications where potentials are tested, grouped or even isolated. 

A system is not a system without small but essential details: 

- Test plugs ensure reliable pick-up from diagnostic sockets 

In tandem with the manufacturing process and application. 

## **General ordering data** 

|Type|PS 2.0 MC|Version|Product data|Packaging|
|---|---|---|---|---|
|Order No.|0310000000|PCB plug-in connector, Accessories, Test plug, red, Number of poles: 1|PCB plug-in connector, Accessories, Test plug, red, Number of poles: 1|Box|
|GTIN (EAN)|4008190000059||||
|Qty.|20 pc(s).||||



Creation date December 5, 2023 8:48:31 AM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

9 

Dimensions without tolerances are no check dimensions 

= 2 ss se ae ~= LE25 35 28 zs s32 SSE ez s S35 os = Ses SES Sa Ee a sos z36 2 ~e = é =° -_ ex et 23 == ss 32 86 s = 

**==> picture [804 x 808] intentionally omitted <==**

**----- Start of picture text -----**<br>
The English version is binding<br>PS 2.0 / ORDER NO.<br>031000 0000<br>Ss<br>L1+10.16 & | S<br>L1+0.4" 0.8 ~<br>0.031" 25<br>LL fe n<br>as SS SS Ir<br>== SSS SS LS é m oo Y<br>ee ee ee mare foe op 1D ——_—_ .<br>eH LN J) aia ol"<br>a ; ico CONDUCTOR<br>! ! ! ! ee<br>(5.08) IL 1.2 | |<br>(O.2") L1 0.047" 10.16 2.85<br>0.4" O.11e" — .,.<br>0.839" a<br>Lt tt | ty ty! i a<br>.<br>Li .<br>2 L1 —<br>o> & oO a | TO MAINTAIN THE NECESSARY VOLTAGE DISTANCES<br>p ob» go p © 8 Ls ==| 2= FOR 600V - UL & 1000V - IEC,<br>S o»: a a S = i = | A SPACING PLATE IS REQUIRED BETWEEN ASSEMBLED<br>© 0) e l l ( e l = LUP 12.7 PCB TERMINAL BLOCKS<br>~-4------.-----{- ne ann<br>NO aw =e =\=<br>_ - - Ch _ - Oy -_ SPACING PLATE<br>fl fl f | — == ] == | E=<br>! = = al fel fa l = Tz] 159,70 5,500<br>HOLE PATTERN (BLOCK) HOLE PATTERN i SPACING PLATE<br>= ps | 88,90 | 6500 _|<br>SS | S I NGLE POL<br>-NO OF POLES = = e , = a eieie<br>teu va Fieli e l e | Si S i a i e fe [eso [2500<br>|= STIFTLAENGE/ 5.0mm/0.197" =i a le Stele S| 50,80 | 2,000<br>SHOWN:PIN L UPENGTH12.70/02/90...803.2mm/0.126!(BLOCK} Aleaes S e<br>LUP 12.70/03/90...80 (BLOCK) GENERAL TOLERANCE:<br>LUP 12.7/04/90... (SINGLE POL) DIN ISO 2768-mK SPACING PLATE [tommy [a [tt mm] 0 Ginen)<br>For the mounting of PCBs, it should be noted that the R .<br>rated data given in the catalogue relates only to the “?OMPLIANT | 102479 Prim PLM Part No.: 411688 Pri m ERP Part No.: 1160810000<br>connection elements. The neccessary creepage and ; = as a 3 4 1 6 3 1 0<br>lerane paths mus be observed in conection wi ist asue Date | Weidmiiller 22:05» sn<br>The current-carrying capacity and pitch tolerance is to 03.03.2018 Modification Sheet 02 of 02 sheets<br>be determined according to DIN IEC 326 part 3 very fine. Date Name<br>Weidmall t tested<br>standard,Provided thatand theare connectorsvalid {or itsare fieldusedtoofthe application,to DINthe VDEintended0627 ran Responsible DS OS POTD [AeninisiatorAmann, ini Alexand LUP1 2.70/../90 \&ee<br>purpose, all requirements with respect to the 9. vo \ x<br>occuring of electrical, mechanical, thermic and Scale: 2:1 Size: A3 | Approved 90<br>Corrosive stress will be satisiied. Drawings Assembly Product file: 7233 LUP 10.16/12.7 ,<br>**----- End of picture text -----**<br>


## 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com 

## **Single Wave:** 

**==> picture [432 x 446] intentionally omitted <==**

**----- Start of picture text -----**<br>
Contact time appr. 3 sec.<br>260 255 °C o s , 260 °C<br>240 250 °C I ~,.N\<br>\ [‘]<br>220 \\ [N] N [N] N<br>LON<br>200180 .\1\\ [.][N] SS\SsN.<br>160 \\\Str ‘\‘S‘S<br>wT “oy, “w<br>140 od° oNs\ "he,a> S.ss<br>12010080 Preheating :o.;7” .’Pua&&Pia4.-As-A.ue<ormeee7eeerrccCi7”Y11hae.~s- 7   appr. 150 °C \ny\\ny\\‘ wy£2.2>""y“ Cooling rate < 6 °K/s SS“>soy.‘s>“sDo~aTa“ss—m~. =~areTaaaooo-<br>;Fe ./4 -.- S.‘<br>6040 ¢Fa¢?me47soMosenooheSa--o “7“7“ ‘‘‘s.SS —=a-. Typical process        Prozess limits<br>20 Sa Heating rate < 3 °K/s “es Temperature on board<br>0<br>0  20  40  60  80  100  120  140  160  180  200  220  240<br>time [s]<br>Double Wave:<br>260 255 °C — 260 °C<br>Total contact time max. 10 sec. Q 250 °C<br>240<br>220<br>200<br>180<br>\<br>160 eee sue\\<br>140120100 Preheating a?’.a”oa a..ue °°&.SS£ 7*.“eS?ny“ocd;7 appr. 150°C [RO\‘\‘\‘‘ NS>NOS.°WSesyO~~>-°°~~ ~~~<br>8060 a?-o7747 *Aefre/&°oo&&4aea7”’ \‘‘‘‘\ Cooling rate < 6 °K/s ‘‘ >cS““Sse°“asD>,-_;-:<br>o* A. “ Typical process<br>40 Prie"7-- neeiteer<r — Process limits<br>20 Heating rate < 3 °K/s Temperature on board<br>0<br>0  20  40  60  80  100  120  140  160  180  200  220  240<br>time [s]<br>Temperature [°C]<br>Temperature  [°C]<br>**----- End of picture text -----**<br>


## 

Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are qualified. 

- PCB thickness 

- Proportion of Cu in the layers 

- Single/double-sided assembly 

- Product range 

- Heating and cooling rates 

soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above maximum profile. 

We reserve the right to make technical changes.