1786290000

**Data sheet** ~~hs~~ 

## **TOP4GS12/180 6.35 OR** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

www.weidmueller.com 

## **Product image** 

## **Do not use product for new developments** 

Similar to illustration 

Conductor entry and screw connection in the same direction on this PCB terminal with 6.35 mm pitch for conductor cross-sections up to 6.0 mm². Conductor outlet direction 90° and 180°. 

## **General ordering data** 

|Version|Printed circuit board terminals, 6.35 mm, Number|
|---|---|
||of poles: 12, 180°, Solder pin length (l): 3.5 mm,|
||tinned, orange, TOP connection, Clamping range,|
||max. : 6 mm², Box|
|Order No.|1786290000|
|Type|TOP4GS12/180 6.35 OR|
|GTIN(EAN)|4032248200924|
|Qty.|50pc(s).|
|Product data|IEC: 320 V / 26 A / 0.5 - 6 mm²|
||UL: 300 V/30 A/AWG 26 - AWG 10|
|Packaging|Box|
|Creation date December 4, 2023 1:31:46 PM CET<br>Deliverystatus|Creation date December 4, 2023 1:31:46 PM CET<br>This article will no longer be available in the future.|
|Available until|2023-03-31|



Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

1 

**Data sheet** — **TOP4GS12/180 6.35 OR** 

## **Weidmüller Interface GmbH & Co. KG** 

Klingenbergstraße 26 D-32758 Detmold Germany 

## **Technical data** ~~Ld~~ 

~~a~~ www.weidmueller.com 

## **Dimensions and weights** 

|Depth|26 mm|Depth(inches)|1.024 inch|
|---|---|---|---|
|Height|29.5 mm|Height(inches)|1.161 inch|
|Height of lowest version|26 mm|Width|77.7 mm|
|Width (inches)|3.059 inch|Net weight|90.22 g|
|**System parameters**||||
|Product family|OMNIMATE Signal - series|Wire connection method||
||TOP4G||TOP connection|
|Mountingonto the PCB|THT solder connection|Conductor outlet direction|180°|
|Pitch in mm(P)|6.35 mm|Pitch in inches(P)|0.25 inch|
|Number ofpoles|12|Pin seriesquantity|1|
|Fitted bycustomer|No|Number of rows|1|
|Solderpin length(l)|3.5 mm|Solderpin dimensions|0.8 x 0.8 mm|
|Solder eyelet hole diameter(D)|1.3 mm|Solder eyelet hole diameter tolerance(D)<br>+ 0,1 mm||
|Number of solderpinsperpole|2|Screwdriver blade|0.6 x 3.5|
|Screwdriver blade standard|DIN 5264|Tighteningtorque,min.|0.5 Nm|
|Tighteningtorque,max.|0.6 Nm|Clampingscrew|M 3|
|Strippinglength|13 mm|L1 in mm|69.85 mm|
|L1 in inches||Touch-safe protection acc. to DIN VDE||
||2.75 inch|0470|IP 20|
|Protection degree|IP20|Volume resistance|1.40 mΩ|
|**Material data**||||
|Insulatingmaterial|PA|Colour|orange|
|Colour chart(similar)|RAL 2000|Insulatingmaterialgroup|I|
|Comparative TrackingIndex(CTI)|≥ 600|UL 94 flammabilityrating|V-2|
|Contact material|E-Cu|Contact surface|tinned|
|Layer structure of solder connection|6...10µm Sn|Storage temperature,min.|-40 °C|
|Storage temperature,max.|70 °C|Operatingtemperature,min.|-50 °C|
|Operatingtemperature,max.|100 °C|Temperature range,installation,min.|-25 °C|
|Temperature range, installation, max.|100 °C|||



## **Conductors suitable for connection** 

|Clampingrange,min.|0.13 mm²|
|---|---|
|Clampingrange,max.|6 mm²|
|Wire connection cross section AWG,|AWG 26|
|min.||
|Wire connection cross section AWG,|AWG 10|
|max.||
|Solid,min. H05(07)V-U|0.5 mm²|
|Solid,max. H05(07)V-U|6 mm²|
|Stranded,min. H07V-R|0.22 mm²|
|Flexible,min. H05(07)V-K|0.5 mm²|
|Flexible,max. H05(07)V-K|4 mm²|
|w. plastic collar ferrule, DIN 46228 pt 4,|0.5 mm²|
|min.||
|w. plastic collar ferrule, DIN 46228 pt 4,|4 mm²|
|max.||
|w. wire end ferrule, DIN 46228 pt 1,|0.5 mm²|
|min.||
|w. wire end ferrule, DIN 46228 pt 1,|4 mm²|
|max.||



Creation date December 4, 2023 1:31:46 PM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

2 

**Data sheet** — **TOP4GS12/180 6.35 OR** 

## **Weidmüller Interface GmbH & Co. KG** 

Klingenbergstraße 26 D-32758 Detmold Germany 

~~a~~ www.weidmueller.com 

|Clampable conductor<br>PF<br>PF<br>PF|Cross-section for conductor connection<br>~~ee~~|Type<br>fine-wired|Type<br>fine-wired|
|---|---|---|---|
|||nominal<br>0.5 mm²<br>~~—~~||
||wire end ferrule<br>~~ee~~|Strippinglength<br>~~—~~|nominal<br>14 mm<br>~~—~~|
|||Recommended wire-<br>end ferrule<br>H0,5/18 OR<br>~~—~~||
||Cross-section for conductor connection<br>~~ee~~<br>~~eee~~<br>~~ee~~|Type<br>fine-wired<br>~~—~~||
|||nominal<br>1 mm²<br>~~ee~~<br>~~—~~||
||wire end ferrule<br>~~eee~~<br>~~ee~~<br>PF<br>~~/-—_______l_____~~|Strippinglength<br>~~ee~~<br>~~—~~|nominal<br>15 mm<br>~~—~~|
|||Recommended wire-<br>end ferrule<br>H1,0/18 GE<br>~~ee~~<br>~~—~~<br>~~/-—_______l_____~~||
||Cross-section for conductor connection<br>~~ee~~<br>PF<br>~~/-—_______l_____~~|Type<br>fine-wired<br>~~ee~~<br>~~—~~<br>~~/-—_______l_____~~||
|||nominal<br>1.5 mm²<br>~~/-—_______l_____~~||
||wire end ferrule<br>PF<br>~~/-—_______l_____~~<br>~~a~~|Strippinglength<br>~~/-—_______l_____~~<br>~~a~~|nominal<br>15 mm<br>~~/-—_______l_____~~|
|||Recommended wire-<br>end ferrule<br>H1,5/18D SW<br>~~/-—_______l_____~~<br>~~a~~||
|||Strippinglength<br>~~a~~|nominal<br>12 mm|
|||Recommended wire-<br>end ferrule<br>H1,5/12<br>~~a~~||
||Cross-section for conductor connection<br>~~ee~~<br>~~ee~~|Type<br>fine-wired||
|||nominal<br>0.75 mm²<br>~~ee~~<br>~~—~~||
||wire end ferrule<br>~~ee~~<br>~~ee~~<br>PF<br>~~/-—_______l____~~|Strippinglength<br>~~ee~~|nominal<br>14 mm<br>~~—~~|
|||Recommended wire-<br>end ferrule<br>H0,75/18 W<br>~~ee~~<br>~~—~~<br>~~/-—_______l____~~||
||Cross-section for conductor connection<br>~~ee~~<br>PF<br>~~/-—_______l____~~|Type<br>fine-wired<br>~~ee~~<br>~~—~~<br>~~/-—_______l____~~||
|||nominal<br>2.5 mm²<br>~~/-—_______l____~~||
||wire end ferrule<br>PF<br>~~/-—_______l____~~<br>~~a~~<br>PF<br>~~ae~~|Strippinglength<br>~~/-—_______l____~~<br>~~a~~|nominal<br>14 mm<br>~~/-—_______l____~~|
|||Recommended wire-<br>end ferrule<br>H2,5/19D BL<br>~~/-—_______l____~~<br>~~a~~||
|||Strippinglength<br>~~a~~|nominal<br>12 mm|
|||Recommended wire-<br>end ferrule<br>H2,5/12<br>~~a~~<br>~~aeae~~||
||Cross-section for conductor connection<br>PF<br>~~ae~~|Type<br>fine-wired<br>~~aeae~~||
|||nominal<br>4 mm²<br>~~aeae~~||
||wire end ferrule<br>PF<br>~~ae~~<br>~~=~~|Strippinglength<br>~~ae~~<br>~~=~~|nominal<br>12 mm<br>~~ae~~|
|||Recommended wire-<br>end ferrule<br>H4,0/12<br>~~ae ae~~<br>~~=~~||
|||Strippinglength<br>~~=~~|nominal<br>14 mm|
|||Recommended wire-<br>end ferrule<br>H4,0/20D GR<br>~~=~~||



Creation date December 4, 2023 1:31:46 PM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

3 

**Data sheet** 

## **TOP4GS12/180 6.35 OR** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

## **Technical data** ~~ass~~ 

~~so~~ www.weidmueller.com 

## **Rated data acc. to CSA** 

|**Rated data acc. to CSA**||||
|---|---|---|---|
|Institute (CSA)|Co|Certificate No. (CSA)|154685-1501716|
|Rated voltage(UsegroupB/CSA)|300 V|Rated voltage(UsegroupD/CSA)|300 V|
|Rated current(UsegroupB/CSA)|25 A|Rated current(UsegroupD/CSA)|10 A|
|Wire cross-section,AWG,min.|AWG 26|Wire cross-section,AWG,max.|AWG 10|
|Reference to approval values|Specifications are|||
||maximum values, details -|||
||see approval certificate.|||
|**Rated data acc. to UL 1059**||||
|Rated voltage(UsegroupB/UL 1059)|300 V|Rated voltage(UsegroupD/UL 1059)|300 V|
|Rated current(UsegroupB/UL 1059)|30 A|Rated current(UsegroupD/UL 1059)|10 A|
|Wire cross-section, AWG, min.|AWG 26|Wire cross-section, AWG, max.|AWG 10|
|**Packing**||||
|Packaging|Box|VPE length|336 mm|
|VPE width|147 mm|VPE height|88 mm|
|**Classifications**||||
|ETIM 6.0|EC002643|ETIM 7.0|EC002643|
|ETIM 8.0|EC002643|ETIM 9.0|EC002643|
|ECLASS 9.0|27-44-04-01|ECLASS 9.1|27-44-04-01|
|ECLASS 10.0|27-44-04-01|ECLASS 11.0|27-46-01-01|
|ECLASS 12.0|27-46-01-01|ECLASS 13.0|27460101|
|**Important note**||||
|IPC conformity|Conformity: The products are developed, manufactured and delivered according international recognized||Conformity: The products are developed, manufactured and delivered according international recognized|
||standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties|||
||in accordance with IPC-A-610 "Class 2". Further claims on theproducts can be evaluated on request.|||
|Notes|• Additional variants on request|||
||• Rated current related to rated cross-section & min. No. of poles.|||
||• Wire end ferrule without plastic collar to DIN 46228/1|||
||• Wire end ferrule with plastic collar to DIN 46228/4|||
||• Crimp form A for wire end ferrules with PZ 6/5 crimping tool are recommended for the largest cable sizes.|||
||• P on drawing = pitch|||
||• Rated data refer only to the component itself. Clearance and creepage distances to other components are to|||
||be designed in accordance with the relevant application standards.|||
||• Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36|||
||months|||



Creation date December 4, 2023 1:31:46 PM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

4 

**Data sheet** 

## **TOP4GS12/180 6.35 OR** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

~~so~~ www.weidmueller.com 

|**TOP4GS12/180 6.35 OR**|**TOP4GS12/180 6.35 OR**|**TOP4GS12/180 6.35 OR**|Klingenbergstraße 26<br>D-32758 Detmold<br>Germany<br>www.weidmueller.com|
|---|---|---|---|
|**Technical data**<br>~~ass~~|||www.weidmueller.com<br>~~so~~|
||**Approvals**|||
||Approvals|G||
||ROHS|Conform||
||**Downloads**|||
||Approval/Certificate/Document of|||
||Conformity|Declaration of the Manufacturer||
||EngineeringData|CAD data--STEP||
||Product Change Notification|20220201 Visual change OMNIMATE® Power PCB terminal blocks and connectors|20220201 Visual change OMNIMATE® Power PCB terminal blocks and connectors|
|||20220201 Visuelle Änderung OMNIMATE® Power Leiterplattenklemmen und-steckverbinder||
||User Documentation|QR-Code product handling video||
||Catalogues|Catalogues in PDF-format||
||Brochures|FL DRIVES EN||
|||MB DEVICE MANUF. EN||
|||FL DRIVES DE||
|||FL APPL_INVERTER EN||
|||FL_BASE_STATION_EN||
|||FL ELEVATOR EN||
|||FL POWER SUPPLY EN||
|||FL 72H SAMPLE SER EN||
|||PO OMNIMATE EN||
|||PO OMNIMATE EN||



Creation date December 4, 2023 1:31:46 PM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

5 

**Data sheet** 

## **TOP4GS12/180 6.35 OR** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 26 D-32758 Detmold Germany 

www.weidmueller.com 

## **Drawings** 

## **Dimensional drawing** 

## **Graph** 

Creation date December 4, 2023 1:31:46 PM CET 

Catalogue status 24.11.2023 / We reserve the right to make technical changes. 

6 

## 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com 

## **Single Wave:** 

**==> picture [432 x 446] intentionally omitted <==**

**----- Start of picture text -----**<br>
Contact time appr. 3 sec.<br>260 255 °C o s , 260 °C<br>240 250 °C I ~,.N\<br>\ [‘]<br>220 \\ [N] N [N] N<br>LON<br>200180 .\1\\ [.][N] SS\SsN.<br>160 \\\Str ‘\‘S‘S<br>wT “oy, “w<br>140 od° oNs\ "he,a> S.ss<br>12010080 Preheating :o.;7” .’Pua&&Pia4.-As-A.ue<ormeee7eeerrccCi7”Y11hae.~s- 7   appr. 150 °C \ny\\ny\\‘ wy£2.2>""y“ Cooling rate < 6 °K/s SS“>soy.‘s>“sDo~aTa“ss—m~. =~areTaaaooo-<br>;Fe ./4 -.- S.‘<br>6040 ¢Fa¢?me47soMosenooheSa--o “7“7“ ‘‘‘s.SS —=a-. Typical process        Prozess limits<br>20 Sa Heating rate < 3 °K/s “es Temperature on board<br>0<br>0  20  40  60  80  100  120  140  160  180  200  220  240<br>time [s]<br>Double Wave:<br>260 255 °C — 260 °C<br>Total contact time max. 10 sec. Q 250 °C<br>240<br>220<br>200<br>180<br>\<br>160 eee sue\\<br>140120100 Preheating a?’.a”oa a..ue °°&.SS£ 7*.“eS?ny“ocd;7 appr. 150°C [RO\‘\‘\‘‘ NS>NOS.°WSesyO~~>-°°~~ ~~~<br>8060 a?-o7747 *Aefre/&°oo&&4aea7”’ \‘‘‘‘\ Cooling rate < 6 °K/s ‘‘ >cS““Sse°“asD>,-_;-:<br>o* A. “ Typical process<br>40 Prie"7-- neeiteer<r — Process limits<br>20 Heating rate < 3 °K/s Temperature on board<br>0<br>0  20  40  60  80  100  120  140  160  180  200  220  240<br>time [s]<br>Temperature [°C]<br>Temperature  [°C]<br>**----- End of picture text -----**<br>


## 

Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are qualified. 

- PCB thickness 

- Proportion of Cu in the layers 

- Single/double-sided assembly 

- Product range 

- Heating and cooling rates 

soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above maximum profile. 

We reserve the right to make technical changes.