1617756-4

CII Mid-Range Relays 

## **FCA-410 Series, 10 Amperes, 4PDT** 

## **Product Facts** 

- n **Hermetically Sealed** 

- n **All Welded Construction** 

- n **Balanced Force** 

- n **Permanent Magnet Drive** 

- n **4PDT switching in one inch cube** 

- n **Contacts — Silver Cadmium Oxide with Gold Plating** 

- n **Coils for DC and AC 50 to 400Hz or 400Hz** 

- n **Weight 2.72 ounces max. (77 grams max.)** 

- n **Qualified to M83536/15, /16** 

The Series FCA-410 relay design.  We also is a polarized single-side manufacture 2-pole and stable design, where the 6-pole versions of this relay. flux from a permanent **FCA-210** — 10 Amp DPDT magnet provides the Relay armature holding force in the deactivated state, and **FCA-610** — 10 Amp 6PDT its flux path is switched and Relay combined with the coil flux **Available** in the operated state. **FCA-415** — 15 Amp 4PDT, This results in appreciably Has the same specifications increased contact pressure in both states over that of a as the FCA-410 except is rated at 15 amps. spring return nonpolar (Commercial Only) 

design.  We also manufacture 2-pole and 6-pole versions of this relay. **FCA-210** — 10 Amp DPDT Relay 

## **Contact Rating — Amperes Ratings Are Continuous Duty** 

|**Type of**<br>**Load**<br>Resistive<br>Inductive<br>Motor<br>Lamp|**Life (Min.)**<br>**Cycles x 103**<br>100<br>20<br>100<br>100|**28 VDC**<br>10<br>8<br>4<br>2|**120VAC**<br>**400Hz**<br>10<br>8<br>4<br>2|**120/200VAC**<br>**400Hz-3Ø 60Hz-3Ø***<br>10<br>2.5<br>8<br>2.5<br>4<br>2.0<br>2<br>1.0|
|---|---|---|---|---|



*60 Hz loads rated for 10,000 operations 

**Overload Current** — 40 AMPS DC, 60 AMPS 400Hz **Rupture Current** — 50 AMPS DC, 80 AMPS 400Hz **Contact Make Bounce** —1 MILLISECOND AT NOMINAL VOLTAGE **Max. Contact Drop at 10 Amps** — INITIAL 0.100 VOLTS **End of Life** — 0.125 VOLTS 

## **General Specifications** 

**Temperature Rating** — -70˚C TO + 125˚C **Altitude** — 300,000 Feet **Shock*** — Z & Y Enclosures — 200 g for 6 mS W, X & M Enclosures — 100 g for 6 mS 

**Vibration, Sinusoidal*** — Z & Y Enclosures — 0.12 DA 10 to 70Hz 30 g 70 to 3000Hz W, X & M Enclosures — 0.12 DA 10 to 57Hz 20 g 57 to 3000Hz **Vibration, Random*** — Z & Y Enclosures — 0.4 g[2] /Hz 50-2000Hz W, X & M Enclosures — 0.2 g[2] /Hz 50-2000Hz **Dielectric Strength** — At Sea Level — 

All circuits to ground and circuit to circuit — 1250 V rms Coil to ground — 1000 V rms At 80,000 Feet — 350 V rms **Insulation Resistance** — Initial (500 VDC) — 100 MΩ Min. After Life or Environmental Tests — 50 MΩ Min. 

**Operate Time at Nominal Voltage** — DC Relays — 15 ms or less AC Relays — 20 ms or less 

**Release Time at Nominal Voltage** — DC Relays — 15 ms or less AC Relays — 50 ms or less 

* Max. contact opening under vibration or shock 10 microseconds 

## **Coil Data** 

|**Coil Data**|||||||
|---|---|---|---|---|---|---|
|**Coil**<br>**Code**|**Nominal**<br>**Voltages**|**Freq.**<br>**Hz**|**DC Res.**<br>**AC Amps (B)**|**Over Tem**<br>**Pickup or**<br>**Below Volts**|**Over Temperature Ran**<br>**Dropout or**<br>**Above Volts**|**erature Range**<br>**Must Hold**<br>**Voltage (C)**|
|1|6|DC|18Ω|4.5|0.3|2.5|
|2|12|DC|70Ω|9.0|0.75|4.5|
|3|28|DC|290Ω|18.0|1.5|7.0|
|4(A)|28|DC|290Ω|18.0|1.5|7.0|
|5|48|DC|865Ω|32.0|2.5|14.0|
|6|28|400Hz|225 mA|22.0|1.25|10.0|
|7|28|50/400Hz|120 mA|22.0|1.25|10.0|
|8|115|400 Hz|40 mA|90.0|5.0|40.0|
|9|115|50/400 Hz|30 mA|95.0|5.0|40.0|



- A.  CODE 4 COILS HAVE BACK EMF SUPPRESSION TO 42 VOLTS MAX. 

- B.  DC COIL RESISTANCE ± 10% AT 25˚C; AC COIL MAX. CURRENT AT NOMINAL VOLTAGE. 

- C.  RELAY WILL STAY IN PICKED-UP STATE DOWN TO MUST HOLD VOLTAGES SHOWN. 

- D.  MAX. OVER-VOLTAGE: 6 & 12 VDC COILS 120% OF NOMINAL; ALL OTHERS 110% OF NOMINAL. 

- E.  COILS AVAILABLE FOR OTHER VOLTAGES AND FOR AC 50/60HZ. 

**NOTE:** Only DC Coil Models are QPL Approved. 

5–18 Catalog 5-1773450-5 Revised 3-13 

Dimensions are in millimeters USA: +1 800 522 6752 unless otherwise specified. Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 

Dimensions are shown for reference purposes only. Specifications subject to change. 

For additional support numbers please visit www.te.com 

www.te.com 

CII Mid-Range Relays 

## **FCA-410 Series, 10 Amperes, 4PDT** (Continued) 

Below are shown the standard terminal types and the enclosures available.  Note that the pin configuration for coil connections is determined by the coil supply voltage. Specify the assembly as indicated under How To Order. Dimensions are shown in inches ± .010 and (Millimeters ± .25) except as noted. 

**==> picture [504 x 603] intentionally omitted <==**

**----- Start of picture text -----**<br>
Terminals Enclosures<br>Terminals on 0.200 centers. CODE  “D” All Enclosures have cupro-Nickel<br>Coil terminals: X1-X2. Socket Pins-115 VAC Coils cans bright acid tin/lead plated after<br>Socket Pins are Gold Plated. assembly to terminal headers.<br>Circuit Board Pins are Tin/Lead Plated. CODE<br>CODE  “A” .270 .050 ± .005 “Z”<br>Socket Pins-All DC Coils (6.86) 7 RubberSilicone(1.27 ± (3) (25.4).100<br>.050 ± .005 Gasket<br>(1.27 ± (3)<br>.270 Silicone<br>(6.86) Rubber cee fo 1.051<br>Gasket (25.79)<br>-X2<br>rrr ; to L<br>1.051<br>.062 ±.001 Pin (25.79)<br>ia | fog8} |<br>(1.57 ± .02 )<br>14 places +X1<br>| OO©OO@ -X2 OO © 0 OO @© Lo|  _<br>© ©© .062 ±.001 Pin CODE “Y” .150 typ.<br>© +X1 OO (1.57 ± .02 )14 places (3.8)<br>©0008 1.015 | a .625 .937<br>BLUE BEAD (25.79) 15.88 23.80<br>CODE  “B”<br>| |<br>Circuit Board Pins-All DC Coils 1.015  .312<br>.270 FULL R (25.79) 1.396 7.92<br>(6.86) 6 PLCS (35.46)<br>SEE NEXT PAGE 1.446<br>(36.73)<br>+ .002<br>.062           Dia. Pin-  .001 r<br>( 1.57         ) 14 Plcs. + .05-  .02 FOR MORE COIL 1.00<br>(25.4)<br>he ©O@OOO© -X2 rr ood ii .040<br>© ©© TERMINAL OPTIONS tt 1.718 Max. . 156(1.02)<br>© ©© (43.64) (3.96)<br>+X1 CODE<br>.312<br>"W" (7.92)<br>OC} - JOS et<br>BLUE BEAD 6-32 UNC-2A .375<br>3 Studs * Fe (9.52)<br>CODE  “C” CODE  .150 Typ.<br>(3.8)<br>Solder Hooks-AC or DC Coils “X”<br>1.00 . 031<br>(25.4) (.787)<br>1.00 .625 .937<br>(25.4) 15.88 23.80<br>7] | | |<br>1.015<br>0.80 DIA 1.015  (25.78) .687<br>.300 ± .020(7.26) ± .51 n ( 2.03) y FULL R (25.79) 1.396 .343 it (17.44)<br>6 PLCS (35.46)1.446 (8.71) .160<br>F IY) aS (36.73) L e — | (4.06)<br><< -X2 + .002 — B uell<br>( .062           Dia. Pin1.57         )14 Plcs. -  .001+ .05-  .02 1.051 1.051(25.79) .687<br>(17.44)<br>Q +X1 QS (25.79)<br>.160<br>1.718 Max. .040 (4.06)<br>BLUE BEAD DQG AA DOD | : (43.64) Lt (1.02) Li =<br>*Metric threads available,To specify use  M  in place of  W<br>a — Oo Oo<br>BLUE BEAD<br>**----- End of picture text -----**<br>


Catalog 5-1773450-5 Dimensions are shown for Revised 3-13 reference purposes only. Specifications subject www.te.com to change. 

Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com UK: +44 800 267 666 

www.te.com 

**5** 

5–19 

CII Mid-Range Relays 

## **FCA-410 Series, 10 Amperes, 4PDT** (Continued) 

## **Terminals** (Continued) **CODE  “E”** 

## **CODE  “F”** 

**CODE  “G”** 

**==> picture [492 x 473] intentionally omitted <==**

**----- Start of picture text -----**<br>
Socket Pins- 28 VAC Coils Circuit Board Pins-115 VAC Coils Circuit Board Pins- 28 VAC Coils<br>(6.86).270 . (1.27 ± (3)050 ± .005 .270(6.86) .270(6.86)<br>7 Silicone<br>Rubber<br>Gasket<br>+ .002<br>.062           Dia. Pin-  .001<br>©COOO@®© -X2 OO + .002 OOO®© -X2 OO (1.57         ) 14 Plcs. -  .02+ .05 (©CIOIOIO) -X2 ©©<br>.062           Dia. Pin-  .001<br>© +X1 ©O (1.57         ) 14 Plcs. + .05-  .02 ©OOO +X1 .062           Dia. Pin-  .001+ .002 UO +X1 ©©<br>(1.57         ) 14 Plcs. -  .02+ .05<br>COOO © ©© SOOO<br>Terminal Wiring<br>A & B Pin Terminal  C Hook Terminal  Transient Suppression D & F Pin Terminal E & G Pin Terminal<br>All DC Coils All AC & DC Coils Cir. 115 VAC Coils 28 VAC Coils<br>1 X2 2 3 1 X2 2 3 1 X2 2 3 1 2 3 1 2 3<br>D - QA. D - Q.2 D - Qf = D  2QP D P_<br>C C C C X2 C X2<br>care) cd O46 GO C66 FO SS<br>+ + + AC AC<br>B B B B X1 B<br>A X1 + A A X1 + AW A X1 + AL A 2A A is X1 s<br>BLUE BEAD<br>\ SS \ MS O c es s \ ~S<br>BLUE BEAD BLUE BEAD BLUE BEAD BLUE BEAD<br>.600<br>NOTE: Polarity must be observed with DC coil supply. (15.24)<br>Relay is polarized with a permanent magnet and will not<br>operate or be damaged by reverse polarity. .400 OOO -X2 O) .200(5.08)<br>Diodes used in transient suppression and in AC rectifier  (10.16) .600<br>circuits have peak inverse voltage rating of 600 VDC | )|_@B) (15.24)<br>minimum.  Zener diodes have a minimum rating of 1 watt. +X1<br>Terminal designations are for reference only and do not<br>appear on the header. BLUE BEAD<br>.200<br>(5.08)<br>.400<br>(10.16)<br>TERMINAL VIEW<br>HOW TO ORDER<br>FCA-415-<br>FCA-410 A  Y  4<br>BLUE BEAD BLUE BEAD<br>BLUE BEAD<br>**----- End of picture text -----**<br>


Diodes used in transient suppression and in AC rectifier circuits have peak inverse voltage rating of 600 VDC minimum.  Zener diodes have a minimum rating of 1 watt. Terminal designations are for reference only and do not appear on the header. 

**RELAY TYPE TERMINALS** (Socket Pins) **ENCLOSURE** ~~od~~ (With Flanges) **COIL** (28 VDC With Transient Suppression). **NOTE: Only DC coil models are QPL Approved** 

***** The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 

5–20 

Catalog 5-1773450-5 Revised 3-13 

Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 to change. 

www.te.com