1617130-4

CII Low Signal Relays 

## **Double Pole, Electrically Held, 1 Amp and Less** (Continued) 

## **MS, MSD, MSDD** 

**MS Sensitive TO-5 High Performance Relay Qualified to MIL-R-39016/11** 

**Terminal View** 

## **Product Facts** 

- n **Hermetically sealed** 

- n **High shock & vibration ratings** 

- n **Spreader pads** 

- n **Excellent RF switching** 

**MSD Sensitive TO-5 Diode Suppressed High Performance Relay Qualified to MIL-R-39016/16** 

**Terminal View** 

## **Product Facts** 

- n **Suppression diode** 

- n **Hermetically sealed** 

- n **High shock & vibration ratings** 

- n **Spreader pads** 

- n **Excellent RF switching** 

**MSDD Sensitive TO-5 Diode Suppressed/Protected High Performance Relay Qualified to MIL-R-39016/21** 

**Terminal View** 

## **Product Facts** 

- n **Suppression & protection diodes** 

- n **Hermetically sealed** 

- n **High shock & vibration ratings** 

- n **Spreader pads** 

- n **Excellent RF switching** 

## **Electrical Characteristics** 

**Contact Arrangement** — 2 Form C (DPDT) 

**Contact Material** — Stationary — 

Gold/platinum/palladium/silver alloy (gold plated) Moveable — 

Gold/platinum/palladium/silver alloy (gold plated) **Contact Resistance** — Before Life — 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life — 200 milliohms max. (measured @ 1 A @ 28 Vdc) 

**Mechanical Life Expectancy** — 1 million operations 

**Coil Voltage** — 5 to 48 Vdc **Coil Power** — 565 mW max. @ 25°C **Duty Cycle** — Continuous **Pick-up Voltage** — Approximately 50% of nominal coil voltage 

**Pick-up Sensitivity** — 60 mW max. @ 25°C 

## **Contact Ratings** 

|**Contact Ratings**|||
|---|---|---|
|**Contact**<br>**Load**|**Type**|**Operations**<br>**Min.**|
|1.0 A @ 28 Vdc|Resistive|100,000|
|250 mA @ 115 Vac,60 Hz & 400 Hz|Resistive(case notgrounded)|100,000|
|100 mA @ 115 Vac,60 Hz & 400 Hz|Resistive|100,000|
|0.2 A @ 28 Vdc<br>0.1 A @ 28 Vdc<br>30µA @ 50 mVdc<br>0.1 A @ 28 Vdc|Inductive(0.32 Henry)<br>Lamp<br>Low Level<br>Intermediate Current|100,000<br>100,000<br>1,000,000<br>50,000|



**==> picture [242 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
.370 (9.40) DIA MAX<br>.031 ± .003 (0.79)<br>.035 (0.89)<br>7 t-<br>|<br>Hf f<br>Hy TERMINALSW 1.500 MIN (38.1)<br>i C .500 MIN (12.7)<br>P .187±.010 (4.75±.25)<br>i (Length excludes mounting pad) | 36° ±  3° IN GROUND PIN.200 (5.08)DIA<br>(OPTIONAL)<br>Header<br> (9.40) DIA . MAX7 ha b7e{0.43)e  — -.001  DIAT<br>Enclosure<br>**----- End of picture text -----**<br>


1-12 Catalog 5-1773450-5 Revised 3-13 

Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 Specifications subject UK: +44 800 267 666 to change. 

For additional support numbers please visit www.te.com 

www.te.com 

CII Low Signal Relays 

**1** 

## **Double Pole, Electrically Held, 1 Amp and Less** (Continued) 

## **MS, MSD, MSDD** (Continued) 

## **Operating Characteristics** 

**Timing** — 

Operate Time — 4.0 ms max. Release Time — MS — 2.0 ms max. MSD/MSDD — 7.5 ms max. (suppression diode, suppression/ steering diodes) 

**Contact Bounce** — 1.5 ms max 

**Dielectric Withstanding Voltage** — Between Open Contacts — 500 Vrms 60 Hz Between Adjacent Contacts — 500 Vrms 60 Hz Between Contacts & Coil — 500 Vrms 60 Hz 

## **Environmental Characteristics Semiconductor Characteristics** 

**Temperature Range** — **Diode** — -65°C to +125°C 

100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage 

**Weight** — 

0.12 oz. (3.40 grms) 0.13 oz. (3.45 grms) with spreader pad attached 

**Vibration Resistance** — 30 G’s, 10 to 3,000 Hz 

**Shock Resistance** — 75 G’s, 6 ±1 ms max. **QPL Approval** — MIL-R-39016/11 (JMS) MIL-R-39016/16 (JMSD) MIL-R-39016/21 (JMSDD) 

**Insulation Resistance** — 10,000 megohms min. @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125°C) 

## **Coil Data** 

.103 (2.62) .156 (3.96) .014± 4 ~~.370 (9.40) SQ MAX .395 (10.03) SQ MAX~~ 0.47 (1.19) DIA .100 (2.54) .150 (3.81) ~~— ro ~O--o-1-6- 0-0" feFe~~ .100 (2.54) ~~@b~~ —— ~~+—o—6~~ .100 (2.54) ~~=os ) aaa oe ~O—O-Og~~ —| ~~4 <— .140 – .175 DIA~~ (3.56 – 4.45) **S S2 W Spreader & Mounting Pads** 

|**Coil Data**|**Coil Data**|||||**Spreader & Mounting Pads**|**Spreader & Mounting Pads**|**Spreader & Mounting Pads**|||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|**Nom.**<br>**Coil**<br>**Voltage**<br>**(Vdc)**|**Coil**<br>**Resistance**<br>**in Ohms**<br>**±10% @ 25°C**<br>(Note 1)|**Coil Circuit**<br>**Current**<br>**mA (Max.)**<br>(Note 1&2)|**Coil Circuit**<br>**Current**<br>**mA (Min.)**<br>(Note 1&2)|**Pickup**<br>**Voltage**<br>**Vdc (Max.)**<br>**@ 25°C**<br>(Note 2)|**Base Turn**<br>**On Current**<br>**mA (Max.)**<br>**@ 25°C**|**Pickup**<br>**Voltage**<br>**Vdc (Max.)**<br>**@ 125°C**<br>(Note 2)|**Base Turn**<br>**On Current**<br>**mA (Max.)**<br>**@ 125°C**|**Drop-Out**<br>**Voltage**<br>**Vdc (Min.)**<br>**@ 25°C**<br>(Note 2)|**Drop-Out**<br>**Voltage**<br>**Vdc (Min.)**<br>**@ -65°C**<br>(Note 2)|**Nom. Coil**<br>**Power**<br>**(mW)**<br>**@ 25°C**|**Max.**<br>**Coil**<br>**Voltage**|**Coil**<br>**Desig.**|
|MS/MSD|||||||||||||
|5.0|100|n/a|n/a|2.6|n/a|3.5|n/a|0.23|0.12|250|7.5|5|
|6.0|200|n/a|n/a|3.4|n/a|4.5|n/a|0.28|0.18|180|10.0|6|
|9.0|400|n/a|n/a|4.85|n/a|6.8|n/a|0.55|0.35|203|15.0|9|
|12.0|850|n/a|n/a|7.0|n/a|9.0|n/a|0.64|0.41|169|20.0|12|
|18.0|1,600|n/a|n/a|9.8|n/a|13.5|n/a|0.92|0.59|203|30.0|18|
|26.5|3,300|n/a|n/a|14.0|n/a|18.0|n/a|1.4|0.89|213|40.0|26|
|36.0|6,500|n/a|n/a|20.0|n/a|27.0|n/a|1.8|1.25|199|57.0|36|
|48.0|11,000|n/a|n/a|25.8|n/a|36.0|n/a|2.4|1.60|209|75.0|48|
|MSDD|||||||||||||
|5.0|64|78.1|56.8|2.9|n/a|3.7|n/a|0.8|0.7|391|7.0|5|
|6.0|125|48.9|36.3|4.0|n/a|4.8|n/a|0.9|0.8|288|10.0|6|
|9.0|400|23.6|18.1|6.1|n/a|8.0|n/a|1.1|0.9|203|15.0|9|
|12.0|850|15.0|11.7|7.8|n/a|11.0|n/a|1.3|1.0|169|20.0|12|
|18.0|1,600|12.2|9.6|11.3|n/a|14.5|n/a|1.5|1.1|203|30.0|18|
|26.5|3,300|8.8|7.0|15.2|n/a|19.0|n/a|1.7|1.3|213|40.0|26|
|36.0|6,500|6.1|4.9|21.7|n/a|27.2|n/a|2.3|1.7|199|57.0|36|
|48.0|11,000|4.8|3.9|27.8|n/a|34.8|n/a|2.8|2.0|209|75.0|48|



**Notes:** 1. Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25°C for 5 seconds max. 

2. Set base current at 3 mA to 15 mA during measurements. 

**Ordering Instructions** Catalog-selected Relays: The catalog number is derived by choosing the proper CODE for each of the relay characteristics in the order in which the codes are listed. 

**Specifying a Part Number Example: Type Terminal Diodes Ground Pins Coils Spreader/Mounting Pads** MS C D G -26 S 

***** The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 

1-13 For additional support numbers please visit www.te.com 

Catalog 5-1773450-5 Dimensions are shown for Revised 3-13 reference purposes only. Specifications subject www.te.com to change. 

USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 

Dimensions are in millimeters unless otherwise specified.