15DYS818-050300W-K

AC/DC Power Supply, ITE, 1 Output, 15 W, 5 VDC, 3 A

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: IDEAL POWER
Product type: AC / DC External Plug In Adaptor Power Supplies
Plug Type: AU, EU, UK, US
No. of Outputs: 1 Output
Output Connector: Barrel Plug Center Positive 2.1mm x 5.5mm x 12mm
Output Power Max: 15W
Input Voltage VAC: 90V AC to 264V AC
Power Supply Approvals: ITE
Power Supply Output Type: Fixed
Output Current - Output 1: 3A
Output Voltage - Output 1: 5VDC
Delivery and price
Units per pack	50
Price	11.77 €
Current stock	50+
Lead time	7 days
Datasheet
## **SPECIFICATION FOR APPROVAL** 

CUSTOMER/客户 :       01097 

ARTICLE/品名:           SWITCHING MODE POWER SUPPLY 

SPECIFICATION /规格:    UL/GS/CE/SAA interchangeable/可换头 MODEL NO/产品型号. :    DYS818-050300W-K 

OUR PART NO./产品编号:  DYS818-050300-19712(A1) 

CUSTOMER P. N/客户料号: 

INPUT/输入 :             100-240V AC 50/60Hz 

OUTPUT/输出:            5.0V  DC  3.0A 

INPUT/输入 :             100-240V AC 50/60Hz 

REV/DATE:/版本/日期：    03      2020/02/26 

|Vendor Confirmation/供应商确认|Vendor Confirmation/供应商确认|Vendor Confirmation/供应商确认|Confirmation  Approved/客户确认|Confirmation  Approved/客户确认|Confirmation  Approved/客户确认|
|---|---|---|---|---|---|
|Made by|Checked by|Approvedby|Made by|Checked by|Approvedby|
|Liuhuixian|Liufei|Wuguoming||||
|Remark/备注：||||||



**IDEAL POWER LTD** 

1 

14 Larks Way, Tree Beech Enterprise Park Gunn, Barnstaple, Devon, EX32 7NZ, 

England 

Tel. +44 (0)845 260 3400 Web.www.idealpower.co.uk 

2 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

## E.C.LIST/变更履历表 

|Rev.<br>版本|Description of Change/变更内容描述<br>~~oO~~|Description of Change/变更内容描述<br>~~oO~~|Changed<br>Date/日期|Operator/<br>执行者|
|---|---|---|---|---|
||Before/变更前<br>~~oO~~<br>~~ee~~|After/变更后<br>~~oO~~<br>~~ee~~|||
|01<br>~~i~~|Original Release(初次发行)<br>~~ee~~<br>~~i~~|~~ee~~<br>~~i~~|2020/01/18<br>~~i~~|Liuhuixian<br>~~i~~|
|02<br>~~a~~|~~a~~|Update Marking Drawing<br>~~a~~|2020/02/19<br>~~a~~|Liuhuixian<br>~~a~~|
|03<br>~~a~~<br>~~i~~<br>~~a~~|~~a~~<br>~~i~~<br>~~ee~~<br>|Update DC Cord Drawing<br>~~a~~<br>~~i~~<br>~~Gs~~<br>|2020/02/26<br>~~a~~<br>~~i~~<br>~~Gs~~<br>~~ee~~<br>|Liuhuixian<br>~~a~~<br>~~i~~<br>~~Gs~~<br>|
|~~a~~<br>~~a~~|~~a~~<br>~~ee~~<br>|~~a~~<br>~~Gs~~<br>|~~a~~<br>~~Gs~~<br>~~ee~~<br>|~~a~~<br>~~Gs~~<br>|
|~~a~~<br>~~a~~<br>~~a~~<br>~~a~~|~~a~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|~~a~~<br>~~Gs~~<br>~~ee~~<br>~~Gs~~|~~a~~<br>~~Gs~~<br>~~ee~~<br>~~ee~~<br>~~Gs~~<br>~~ee~~|~~a~~<br>~~Gs~~<br>~~ee~~<br>~~Gs~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>|~~Gs~~<br>~~Gs~~<br>|~~Gs~~<br>~~ee~~<br>~~Gs~~<br>~~en~~<br>|~~Gs~~<br>~~Gs~~<br>|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>|~~Gs~~<br>~~Gs~~<br>|~~Gs~~<br>~~ee~~<br>~~Gs~~<br>~~en~~<br>|~~Gs~~<br>~~Gs~~<br>|
|~~a~~<br>~~a~~|~~ee~~<br>~~es~~|~~Gs~~<br>~~es~~|~~ee~~<br>~~Gs~~<br>~~en~~<br>~~es~~|~~Gs~~<br>~~es~~|
|~~a~~<br>~~a~~<br>~~a~~<br>~~a~~|~~es~~<br>~~es~~<br>~~ee~~|~~es~~<br>~~es~~<br>~~Gs~~|~~en~~<br>~~es~~<br>~~es~~<br>~~Gs~~<br>~~es~~|~~es~~<br>~~es~~<br>~~Gs~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>|~~Gs~~<br>~~Gs~~<br>|~~Gs~~<br>~~es~~<br>~~Gs~~<br>~~ns~~<br>|~~Gs~~<br>~~Gs~~<br>|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>|~~Gs~~<br>~~Gs~~<br>|~~Gs~~<br>~~es~~<br>~~Gs~~<br>~~ns~~<br>|~~Gs~~<br>~~Gs~~<br>|
|~~a~~<br>~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~es~~<br>~~ee~~|~~Gs~~<br>~~es~~<br>~~Gs~~|~~es~~<br>~~Gs~~<br>~~ns~~<br>~~es~~<br>~~Gs~~<br>~~es~~|~~Gs~~<br>~~es~~<br>~~Gs~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>|~~Gs~~<br>~~Gs~~<br>|~~Gs~~<br>~~es~~<br>~~Gs~~<br>~~ns~~<br>|~~Gs~~<br>~~Gs~~<br>|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>|~~Gs~~<br>~~Gs~~<br>|~~Gs~~<br>~~es~~<br>~~Gs~~<br>~~ns~~<br>|~~Gs~~<br>~~Gs~~<br>|
|~~a~~<br>~~a~~|~~ee~~<br>~~es~~|~~Gs~~<br>~~es~~|~~es~~<br>~~Gs~~<br>~~ns~~<br>~~es~~|~~Gs~~<br>~~es~~|
|~~a~~<br>~~a~~<br>~~a~~|~~es~~<br>~~ee~~|~~es~~<br>~~Gs~~|~~ns~~<br>~~es~~<br>~~Gs~~<br>~~en~~|~~es~~<br>~~Gs~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>|~~Gs~~<br>~~Ps~~|~~Gs~~<br>~~en~~<br>~~Ps~~<br>~~es~~|~~Gs~~<br>~~Ps~~|
|~~a~~<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>~~ee~~|~~Gs~~<br>~~Ps~~|~~Gs~~<br>~~en~~<br>~~Ps~~<br>~~es~~|~~Gs~~<br>~~Ps~~|
|~~a ~~<br>~~a~~<br>~~a~~|~~ee~~<br> ~~ee~~<br>~~ee~~|~~Ps~~<br>~~Gs~~|~~Ps~~<br>~~es~~<br>~~Gs~~<br>~~en~~|~~Ps~~<br>~~Gs~~|
|<br>~~a~~<br>~~a~~|~~ee~~<br>~~ee~~<br>~~ee~~|~~Gs~~<br>~~Gs~~|~~Gs~~<br>~~en~~<br>~~Gs~~<br>~~ns~~|~~Gs~~<br>~~Gs~~|
|~~a~~|~~ee~~<br>~~ee~~|~~Gs~~<br>~~Gs~~|~~Gs~~<br>~~en~~<br>~~Gs~~<br>~~ns~~|~~Gs~~<br>~~Gs~~|



## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

|||CONTENTS/目录|
|---|---|---|
|1|Compendium/简述…………………………………………………………………………….…. ….…. ……….…..….....4||
|2|Input Characteristics/|Input Characteristics/输入特性………………………….………………………….. ….…. ……….….………….…..….4|
||2.1|Input Voltage & Frequency/输入电压&频率……..………………………………….…. ……….….……….…..….4|
||2.2|Input AC Current/AC 输入电流…..……………………………………………..…….…. ……….….……….…..….4|
||2.3|Inrush Current (Cold Start)/浪涌电流(冷启动)…….………………….…………….…. ……….….……….…......4|
||2.4|Efficiency (Normal)/效率(额定输入)…………………………………..…….………. ……….….……….…..…….4|
||2.5|Energy Consumption /空载功耗………………………………………………….. ….…. ……….……….…..……..4|
|3|Output Characteristics/输出特性…………………………………………………...…………….…. ……….….….….....5||
||3.1|Static Output Characteristics <Vo & R+N>/静态输出特性………..……...….…….…. ……….….…….…..…....5|
||3.2|Line / Load Regulation/线性/负载调整率…...………….……………..……………….…. …….….…….….. .….5|
||3.3|Turn on Delay Time/开机延迟时间…………………………………….…………. ………….….….….…….…..…5|
||3.4|Hold up Time/关机维持时间…………………………………………………..……….…. ……….….…….…..…...5|
||3.5|Capacitance Load/容性负载………………………………………………………..……….…. …….….…….……..5|



4 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

||3.6|3.6<br>Output Overshoot / Undershoot/输出过冲/欠冲……………………………………….….…….…..….….…….....5|
|---|---|---|
||3.7|3.7<br>Output Load Transient Response/输出负载瞬态响应…..…………….……………….….…….…..……….…….6|
|4|Protection Requirements/保护特性……………………………………………..…………….….…….…..………….......6||
||4.1|4.1<br>Over Current Protection/过流保护………………………………………………………….….…….…..……..…....6|
||4.2|4.2<br>Short Circuit Protection/短路保护………………………………...………………………….….…….…..…..........6|
||4.3|4.3<br>Over Voltage Protection/过压保护…………………………………………………………….….…….…...………..6|
|5|Environment Requirements/环境要求.…….……….…….……………………….….. …………….….…….…..………6||
||5.1|5.1<br>Operating Temperature and Relative Humidity/操作温/湿度要求…………...…. ………….….…….…..……....6|
||5.2|5.2<br>Storage Temperature and Relative Humidity/存储温/湿度要求……..……...…………….….…….…..……..…..6|
||5.3|5.3<br>Vibration/振动……………………………………………..……………….………………….….…….…..……….....6|
||5.4|5.4<br>Drop in /跌落…………………………………………………………………………….….…….…..………………..6|
|6|Reliability Requirements/可靠性要求………………………………………………………………………………………7||
||6.1|6.1<br>Burn-in/煲机………………………………………………………………………….….…….…...….. ………………7|
||6.2|6.2<br>MTBF Qualification/平均间隔故障时间估算………………………………...……………………………….............7|
|7|EMI/EMS Standards/EMI/EMS 标准………………………………………………………………………………………….7||
||7.1|7.1<br>EMI Standards/EMI 标准…………….………………………………….….…….…...…….......................................7|
||7.2|7.2<br>EMS Standards/EMS 标准……………………………………………………………………………….….…….…….7|
|8|Safety Standards/安规标准………………………………….…..……………………………………….….………….…….8||
|8.1|8.1|8.1Safety Accord with/安全:符合标准………………………………..……………………………………………………...8|
|8.2|8.2|8.2Dielectric Strength(Hi-pot)/介电耐压强度(高压)………………...………………………………………………...…..8|
||8.3|8.3Leakage Current/漏电流…………………………………………...……………………….........................................9|
||8.4|8.4Insulation Resistance/绝缘阻抗…………………………………...………………………….....................................9|
|9|9Outline Drawing/外观示意图:……………………………….......……………………………..........................................9||
|10|10DC Cord Drawing/|DC Cord Drawing/DC 线示意图: ……………………………..…………………………………….………………….....10|
|11|11Marking Drawing/铭牌示意图:……………………………………………………………...............................................11||



5 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

12 Package Drawing/ 包装示意图: **……………………………………………………………..............................................12 1.Compendium/** 简述 The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides **15** W continuous output power. 资料详细描述了一款 **15 W(** 连续输出功率 **)** 开关电源的电气性，结构性及环境等要求 . The power supply shall meet the RoHS requirements. 此款电源符合 **RoHS** 要求 **. 1.1 Description/** 描述 SMPS Adapter(Wall mount)/ 7 插墙式适配器 SMPS Adapter(Interchangeable)/ Oo 可换头适配器 SMPS Adapter(Desk-top)/ ~~7~~ 桌面型适配器 Open Frame/ ~~7~~ 开放式结构 SMPS Unit (With Case)/ ~~7~~ 带铁壳型 Others/ Z 其他 **2. Input Characteristics/** 输入特性 **2.1Input Voltage & Frequency/** 输入电压与频率 The range of input voltage is from 90Vac to 264Vac with a single phase. 输入电压范围：从 **90Vac** 到 **264Vac,** 单相输入 **.** Minimum/ 最小 Nominal/ 额定值 Maximum/ 最大 

6 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

|Input Voltage/输入电压|90Vac|100Vac~240Vac|264Vac|
|---|---|---|---|
|Input Frequency/输入频率|47Hz|60Hz/50Hz|63Hz|



## **2.2Input AC Current/AC** 输入电流 

0.5Amax @ 100-240Vac input &Full load/ 在 **100 – 240Vac** 输入和满载条件下最大 0.5 **A** 有效值 

## **2.3 Inrush Current (cold start)/** 浪涌电流 **(** 冷启动 **)** 

The inrush current will not exceed 60A at 100-240Vac input and Max load for acold start at 25 `℃` 在100-240V 交流电输入和最大负载冷启动环境25℃时浪通电流不能超过 60A 

## **2.4 Average Efficiency/** 平均效率 

While input 115Vac and 230Vac, the average efficiency is more than 81.38%. 

The test point is at 25%, 50%, 75% and 100% of max load respectively. `在输入` **115Vac** `和` **230Vac** `条件下，平均效率不小于` **81.38%.** `测试点分别是最大载的` **25%,50%,75%** `和` **100%** `。` 

## **2.5 Energy Consumption /** 空载功耗 

While input 115Vac or 230Vac and the output is no load,the input power loss must be 

less than 0.1W 

在输入 **115Vac/230Vac** 时 **,** 空载功耗小于 **0.1W** 

## **3. Output Characteristics/** 输出特性 

## **3.1Static Output Characteristics <Vo& R+N>/** 静态输出特性 **<** 输出 **&** 纹波 **+** 噪音 **>** 

Output Rated Load/ 额定负载 Output Range R+N Remark 

7 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

|Rate|Min. Load|Max. Load||输出电压范围|纹波与噪声|备注|
|---|---|---|---|---|---|---|
|+5.0V|0.0A|3.0A||4.7V-5.3V|150mVp-p||



Ripple & Noise: Measurement is done by 20MHz bandwidth oscilloscope and the outputparalleled a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor. 

(test under thecondition of rated input and rated output) 

纹波与噪声 **:** 量测时示波器选用 **20MHz** 带宽限制 **,** 输出端要并联一颗 **0.1uF** 的陶瓷电容和一颗 **10uF** 的电解电容 **.** (在额定输入及输出的条件下检测) 

## **3.2 Line/ Load Regulation/** 线性 **/** 负载调整率 

|Output|Load Condition/负载条件|Load Condition/负载条件|Line Regulation<br>线性调整率|Load Regulation<br>负载调整率|Remark<br>备注|
|---|---|---|---|---|---|
|Rate|Min. Load|Max. Load||||
|+5.0V|0.0A|3.0A|3%|5%||



## **3.3Turn - on Delay Time/** 开机延迟时间 

3S max. @ 100Vac to 240Vacinput & Full load 

在 **100Vac** 到 **240Vac** 输入和满载条件下最大 **3S** 

## **3.4 Hold-up Time/** 关机维持时间 

5mS min. @ Full load &100Vac/60Hz input turn off at worst case 

在 **100Vac** 输入 **,** 满载同时最差情况下关机，最小 **5mS** 

## **3.5 Capacitance Load/** 容性负载 

While input 100~240Vac and capacitance load is 470uF, the adapter can turn on normally 

and the output is in the rated range. 

在输入 **100~240Vac** ， **470uF** 容性负载条件下，适配器能正常开机。 

8 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

## 并且输出电压范围在额定范围下。 

## **3.6 Output Overshoot / Undershoot/** 输出过冲 **/** 欠冲 

10%max. When the power on or off 

当电源开/关机时,10%最大 

## **3.7 Output Load Transient Response/** 输出负载瞬态响应 

the output shall not exceed 10% of the nominal output voltage, load flunctuation: from 20% to 80%, R/S: 0.5A/uS, frequency: 100Hz duration and 8mS at 80%. 

输出电压不能超过额定电压的 **10%,** 负载变化 **:** 从 **20%** 到 **80%,** 斜率 **: 0.5A/uS,** 频率 **: 100Hz, 80%** 负载持续时间为 **8mS.** 

## **4. Protection Requirements/** 保护要求 

## **4.1Over Current Protection/** 过流保护 

Over Current Point Limited/ `过流点限制：` I `＞` **3.9A** 

The output shall hiccup when the over currents applied to the output rail, and shall be 

self-recovery when the fault condition is removed 

`当过电流时，输出将进入打嗝模式，当过流情况解除后，产品将会自动恢复正常` 

## **4.2Short Circuit Protection/** 短路保护 

The input power shall decrease when the output rail short, the power supply shall no 

damage, and shall be self-recovery when the fault condition is removed 

当输出短路时 **,** 产品输入功率降低且不会损伤 **,** 当短路情况解除后 **,** 产品将会自动恢复正常 

## **4.3 Over Voltage Protection/** 过压保护 

The power supply shall protection when the output over voltage `。` 

9 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

`当输出发生过压时，产品进入保护模式.` 

## **5. Environment Requirements/** 环境要求 

## **5.1Operating Temperature and Relative Humidity/** 操作温 **/** 湿度要求 

0°C to +40°C 

10%RH to 90%RH 

## **5.2 Storage Temperature and Relative Humidity/** 存储温 **/** 湿度要求 

-20°Cto +80°C 

5%RH to 95%RHnon-condensing @ Sea level shall be low 10,000 feet/ 低于 **10,000** 英尺 

## **5.3 Vibration/** 振动 

10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, Z 

扫描频率 **: 10 to 300Hz,** 加速度 **: 1.0G(** 位移 **: 3.5mm), X, Y, Z** 三垂直坐标轴向各振动 **1** 小时 

## **5.4 Drop in/** 跌落 

Height: 1m; the product should be fell off on the plank with the thickness of at least 53mm, and the plank should be put on the cement ground or on the ground without flexibility. Random surface in all 3 times. 

`跌落高度:1 米, 并跌落到厚度至少为53mm 的木板上,且木板应放在水泥基座或等同的无 弹性地面上,任意面共3 次.` 

## **6.Reliability Requirements/** 可靠性要求 

## **6.1 Burn-in/** 煲机 

The power supply shall be burn-in at least 4 Hours under normal input and 

1 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

80% rated load at 40 ℃[] 5 ℃ 

产品至少要在 **40** ℃[] **5** ℃的环境及 **80%** 以上额定负载条件下煲机 **4** 小时 

## **6.2 MTBF Qualification/** 平均间隔故障时间估算 

The MTBF shall be at least 50,000hours at 25°C, Full load and nominal input condition 

平均间隔故障时间 **:** 至少 **50,000** 小时 **,25** °C 环境及额定输入与满载条件下 

## **7. EMI/EMS Standards/EMI/EMS** 标准 

## **7.1  EMI Standards/EMI** 标准 

`FCC Part15 class B` 

`EN55032 EN55014-1 EN61204-3(CISPR 22)` 

`AS/NZS CISPR22 AS/NZS CISPR13 AS/NZS CISPR14.1` LJ LI `GB9254 GB13837 GB17625.1` LJ LJ `J55032 J55013 J55014-1` LJ LJ `KN22 KN13 KN14-1` 

`CNS13438` 

## **7.2  EMS Standards/EMS** 标准 

`EN55035 EN55020 EN55014-2 EN61204-3` 

7.2.1 IEC 61000-4-2,electrostatic discharge(ESD) requirement/ 静电抗扰度要求 

Discharge characteristic/ 静电规格 Test level/ 测试条件 Test criteria/ 测试标准 Air discharge/ 空气放电 +/-8KV B Contact discharge/ 接触放电 +/-4 KV B 

7.2.2 IEC 61000-4-4, electric fast transients(EFT) immunity requirement/ 电快速瞬变脉冲群 

1 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

**==> picture [451 x 583] intentionally omitted <==**

**----- Start of picture text -----**<br>
Coupling/ 测试端口 Test level/ 测试条件 Test criteria/ 测试标准<br>AC-input/ 交流输入 0.5KV  A<br>AC-input/ 交流输入 1KV  B<br>7.2.3 IEC 61000-4-5, surge capability requirement/ 浪涌抗扰度要求<br>Surge voltage/ 雷击电压 Test criteria/ 测试标准<br>Differential mode/ 差模  +/-1KV<br>A<br>Common mode/ 共模  +/-2KV<br>Assessment criteria / 评估标准<br>Acceptable criteria  Performance<br>可接受标准 性能<br>Performance is not allowed to be changed, any changes should be<br>within the specified limits<br>A<br>性能不允许变化；如果性能会发生变化，则变化的范围在产品规格书规<br>定的范围内.<br>During the testing process, the performance degradation is allowed<br>within the specifications of the product specification. After the<br>elimination, the equipment can return to normal and no reset or any<br>B  manual intervention is allowed. .<br>设备在测试过程中,性能降低允许在产品规格书要求范围内,干扰消除<br>后,设备能恢复正常,不允许出现复位和任何方式的人工干预.<br>8. Safety Standards/ 安规标准<br>8.1 Safety Accord with/ 安全 : 符合标准<br>UL60950-1,CSA C22.2 NO.60950-1     UL62368-1,CSA C22.2 NO.62368-1<br>**----- End of picture text -----**<br>


## **7.2.4 Assessment criteria /** 评估标准 

## **8. Safety Standards/** 安规标准 

1 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

`UL1310` 

LJ `IEC60950-1` Xx] `IEC62368-1` LJ `IEC61558-1,IEC61558-2-16` LJ `EN60950-1` Xx] `EN62368-1` LJ `EN61558-1,EN61558-2-16` L] `AS/NZS 60950.1` Xx] `AS/NZS 62368.1` L] `AS/NZS 61558.1,AS/NZS 61558.2.16` L] `GB4943.1` LJ `GB8898` L] `J60950-1` LJ `J62368-1` LJ `J61558-1,J61558-2-16` L] `K60950-1` LJ `K60065 CNS14336-1 CNS14408` 

Note: AC pins corresponding to relative national standards. 

`注：相应的AC 插脚对应相应国家的标准.` 

## **8.2 Dielectric Strength(Hi-pot)/** 介电耐压强度 **(** 高压 **)** 

Primary to Secondary: 4242VDC/5mAMax/ 60second(3 seconds for mass production) 

初级对次级 **: 4242VDC / 5mAMax / 60** 秒 **(** 生产时高压测试时间 **: 3** 秒 **)** 

## **8.3Leakage Current/** 漏电流 

0.25mAmax. at 264Vac / 50Hz / 在 **264Vac / 50Hz** 输入时，最大漏电流 **0.25mA** 

## **8.4 Insulation Resistance/** 绝缘阻抗 

50MΩ min. at primary to secondary add 500Vdc test voltage 

在初级与次级间加 **500Vdc** 进行测试 **,** 最小绝缘阻抗 **50MΩ** 

1 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

1 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

## **9.Outline Drawing/** 外观示意图: 

1 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

**10.DC Cord Drawing/** DC 线示意图: 

1 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

**==> picture [214 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
11.Marking Drawing/ 铭牌示意图:<br>**----- End of picture text -----**<br>


1 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

1 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

## **12. Package Drawing/** 包装示意图: 

## MECHANICAL DIMENSION: 

||L(mm)|W(mm)|H(mm)|
|---|---|---|---|
|PLASTIC BAG<br>(for body)|210|130||
|PLASTIC BAG<br>(for plug)|110|80||
|WHITE BOX|143|70|60|
|CARDBOARD|370|296||
|PAPER CASE|380|306|275|



## PACKING METHOD： 

|PACKING METHOD|10PCS/LAYER *4LAYERS|
|---|---|
|QTY|40PCS|



1 

## SWITCHING MODE POWER SUPPLY 

## SPECIFICATION 

**==> picture [443 x 537] intentionally omitted <==**

**----- Start of picture text -----**<br>
N.W  6.0Kg<br>PLASTIC BAG/PE袋 G.W  7.5Kg<br>WHITE BOX/白盒<br>CARDBOARD/纸板<br>PAPER CASE/纸箱<br>|<br>------ END ------<br>**----- End of picture text -----**<br>


2
Updated at February 9, 2023
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →