1423618-6 .

Specialty Relays 

## **SCB/SCC Series, Specification Grade Discrete Plug-in, Time Delay Relay** 

## **Timing Specifications** 

## **Contact Data @ 25°C** 

## **Environmental Data** 

**Arrangements** — 2 Form C (DPDT) **Rating** — 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC; 345VA. Same polarity. 

**Timing Modes** — On-Delay, Off-Delay and Interval **Timing Ranges** — 6 to 180 cycles; 0.1 to 3 / 0.1 to 10 / 0.33 to 10 / 1 to 30 / 4 to 120 sec.; 0.33 to 10 / 1 to 30 / 2 to 60 min.; 0.33 to 10 hr. (All are +5%, – 0% of maximum values). 

**Temperature Range** — Storage — SCB and SCC — -40°C to +85°C Operating — SCB: -30°C to +65°C; SCC: -30°C to +50°C 

**Expected Mechanical Life** — 10 million operations **Expected Electrical Life** — 500,000 operations, min., at rated resistive load 

## **Mechanical Data** 

**Timing Adjustment** — Knob or fixed time (internal fixed resistor) — all models; customer supplied external potentiometer or resistor — On-Delay and Interval models only. 

**Mounting/Termination** — SCB — UL recognized. Optional 8- or 11-pin octal-type sockets may be ordered separately. SCC — 8- or 11-pin octal type sockets supplied with timer. (Must be used to qualify as "UL Listed" device.) **Weight** — SCB: 5.3 oz. (149g) approx.; SCC: 7.5 oz. (210g) approx. 

**Initial Dielectric Strength** — Between Terminals and Case — 1,000VAC plus twice the nominal voltage for one minute. 

**Accuracy** — Repeat Accuracy — ±0.5% ±0.004 sec. Overall Accuracy — ±2% max. 

## **Input Data @ 25°C** 

**Voltage** — See Ordering Information section for details. 

## **Product Facts** 

**Reset Time** — 25 ms. 

- n **On-Delay, Off-Delay and Interval timing modes** 

**Power Requirement** — 3W, max. 

**Relay Operate Time** — Off-Delay mode — 30 ms; Interval mode — 20 ms.. 

Transient Protection: Non-repetitive transients of the following magnitudes will not cause spurious operation of affect function and accuracy. 

- n **13 timing ranges from 0.1 sec. to 60 min.** 

**Relay Release Time** — On-Delay mode only — 15 ms. 

- n **10A DPDT output contacts** 

|**Operating**<br>**Voltage**|**<0.1 ms**|**<1 ms**|
|---|---|---|
|All except<br>12 & 24|3,000V|2,500|
|12 & 24|Consult Factor|Consult Factory|



- n **Knob, fixed or external timing adjustment.** 

- n **Rated for pilot duty** 

Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. 

- n **Premium components** 

- n **File 3520, File E60363, File LR51332, File E60363 (SCC only) R** 

- &e AW **R** WCE **R** 

**12** 

**Ordering Information** (All "X's" must be included to complete part number) 

|the requirements for a given application.<br>**R**<br>**R**<br>**R**<br>&e AW WCE|the requirements for a given application.|the requirements for a given application.|**Ordering Information**(All "X's" must be included to complete part number)|**12**|
|---|---|---|---|---|
||||**SCB**<br>**RX**<br>**A**<br>**A**<br>**XA**<br>**01**<br>**2XX**|**12**|
|**Outline Dimensions**<br>**Wiring Diagrams (Bottom Views)**<br>(50)<br>(50)<br>(18)<br>(83)<br>Insulated, shielded two-conductor<br>cable similar to BELDEN 8719, 8720<br>or 8769 required for leads longer<br>than 6 inches. Max. permissible<br>length is 50 feet.<br>~~= 1ame~~<br>.701<br>3.251<br>O<br>Q ~~_~~<br>~~-~~<br>~~folk~~<br>L<br>~~dy~~<br>~~ews~~<br>~~pocennne------4~~<br>Cel<br>1<br>EXTERNAL<br>I<br>|<br>CONTROLSWITCH<br>1<br>1<br>Dry-Contact<br>\<br>~~—~~Hi<br>~~t---9__@____3~~<br>rs<br>6<br>6<br>5@<br>@@<br>4<br>5<br>5<br>7<br>~~4~~<br>~~8~~<br>~~ap~~<br>~~ry~~<br>~~4~~<br>~~8~~<br>~~a?~~ ~~Q~~ @ ~~4~~<br>input 2<br>~~Q~~<br>7 iNPUT<br>~~W~~a ~~Q~~ a~~s~~<br>INPUT’<br>‘) ~~INP~~UT<br>(<br>‘<br>INPUTi<br>‘ ~~INP~~UT<br>111<br>1<br>8<br>111<br>+<br>~~-~~<br>+<br>-<br>+<br>~~_~~|||**|**<br>**Series SCB**<br>**Series SCC**<br>Discrete<br>Industrial<br>Timer<br>**|||||||||**<br>**Mounting Series SCB**<br>RX = 8- or 11-pin socket<br>(order separately)<br>**Mounting Series SCC**<br>LA = 8-pin socket p/n<br>BCSA08SC for oper-<br>ating mode 01 or 03<br>with knob adjust or<br>fixed time.<br>LC = 11-pin socket p/n<br>BCSA11SC for oper-<br>ating mode 02; or 01<br>or 03 with external<br>potentiometer or<br>resistor.<br>**||||||||||||||||||||**<br>**Operating Voltage**<br>**(+10%, –15%)**<br>A = 120VAC, 50/60 Hz.<br>/ 120VDC<br>B = 240VAC, 50/60 Hz.<br>E = 24VAC, 50/60 Hz. /<br>24VDC<br>F = 48VAC, 50/60 Hz. /<br>48VDC<br>Q = 12VDC<br>**|**<br>**Timing Range**<br>A =0 .1 to 3 sec.<br>B = 0.5 to 15 sec.<br>C = 1 to 30 sec.<br>D = 2 to 60 sec.<br>E = 4 to 120 sec.<br>F = 6 to 180 sec.<br>G = 10 to 300 sec.<br>I = 2 to 60 min.<br>K = 3 to 180 cycles<br>L = 0.33 to 10 min.<br>M = 0.5 to 15 min.<br>N = 1 to 30 min.<br>P = 0.1 to 10 min.<br>**||||||||||||||||||||**<br>**Timing Adjustment**<br>XA = Knob Adjust<br>XB = External<br>Potentiometer or resis-<br>tor (Operating modes 1<br>and 3 only).<br>XF =Fixed Times –Specify<br>time delay in seconds<br>per the following<br>examples:<br>**|**<br>**Operating Mode**<br>01 = On-Delay<br>02 = Off-Delay<br>03 = Interval<br>**|||||||**<br>**Output**<br>2XX = DPDT<br>Relay||
|**Off-Delay**<br>**On-Delay & Interval**<br>**On-Delay & Interval**<br>**Fixed or Knob**<br>**Fixed or Knob**<br>**External Potentiometer**<br>**Adjust**<br>**Adjust**<br>**or Resistor Adjust**|||XF9.000 = 9 sec.<br>XF99.00 = 99 sec.<br>XF999.0 = 9999 sec.<br>XF1000 = 1000 sec.||
|BELDEN is a trademark of Belden|||**Authorized distributors are likely to stock the following:**||
|Technologies, Inc.|||None at present.||



None at present. 

Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters Revised 3-13 reference purposes only. unless otherwise specified. Specifications subject www.te.com to change. 

12–35 

USA: +1 800 522 6752 For additional support numbers Asia Pacific: +86 0 400 820 6015 please visit www.te.com UK: +44 800 267 666 

www.te.com