1423154-8

Specialty Relays 

## **AGASTAT 2100 Series, Miniature Electropneumatic Timing Relay** 

## **Product Facts** 

- n **High Repeat Accuracy over voltage and temperature extremes** 

- n **Hermetically sealed units are designed for high shock and vibration applications** 

- n **Instant recycling — easy linear adjustment** 

- n **Exclusive Dial Head adjustment — no needle valves** 

- n **Delay ranges from milliseconds to 3 minutes** 

- n **DPDT contacts** 

## **Design & Construction** 

## **Sealed patented timing head** — 

cir cu lates air un der con trolled pressure through a vari able or i fice to pro vide ad - just able tim ing.  Cir cu lar-path Dial Head prin ci ple re plac es tra di tion al needle valve. **Snap-action switch as sem bly** — pro vides sus tained contact pres sure during tim ing cy cles.  Spe cial ly de signed over cen ter mech a nism as sures flut ter-free load trans fer after ex tend ed de lay periods. 

## **Precision-wound solenoid** 

**as sem bly** — supplies the ba sic mo tive force when the con trol cir cuit is closed. These assemblies are mounted in a rigid self-sup port ing frame work within a steel enclosure.  This rug ged con struc tion as - sures permanent align ment of all op er ating mem bers, the key to this unit's long trou ble-free operation. 

## **Operation** 

**Repeat Accuracy** — NORMAL VER TI CAL PO SI TION ±5% at 25°C; ±7% at 85°C; ±8% at -55°C. 

**Series 2112** ~~-~~ **(On-Delay)** — 8 Ap ply ing rated voltOSSTv® age to the solenoid FES coil starts the pre set 7 5 4 time de lay.  At the end of the delay pe - Series 2112 

The average time between -55°C and 85°C will be within ±20% of the average @ 25°C with a pro por tion al ly reduced effect at lesser extremes. 

In extremely short delay settings an additional 8 msec. vari a tion may result on AC models due to "half cycle" al ter nat ing current effect. 

**Setting Tolerance** — Factory time setting, when specified, subject to ad di tion al +5% tolerance. 

ri od the NC con tacts break and the NO con tacts make.  Con tacts re main in this po si tion un til the coil is de-en er gized, when the switch in stan ta neous ly re turns to its orig i nal po si tion. De-en er giz ing the coil, ei ther during or after the de lay pe ri od, will im me di ate ly (with in 25 msec.) re cy cle the unit.  It will then provide an - oth er full delay period on re-energization. 

## **Position Sensitivity** — 

HORIZONTAL POSITION — Approximately 5% increase from the initial time in the vertical position. 

INVERTED POSITION — Approximately 10% increase from the initial time in the verti cal position. 

**Re set Time** — 2112 Series:  25 msec.; 2122 Series:  75 msec. **Relay Release Time** — 25 msec. (2112 Series) 

**Relay Operate Time** — 75 msec. (2122 Series) 

**Series 2122 (Off-Delay)** — Ap ply ing rated voltage to the coil for at least 75 msec. (for accurate timing) will in stan ta neous ly transfer the switch, 

~~+~~ **Operating Voltage** — Coil Data 

|**Nominal**<br>**Re sis tance**<br>**Code**<br>**Operating**<br>**Ohms**<br>**Voltage**<br>**±10%**<br>M<br>12VDC<br>30<br>N<br>28VDC<br>131<br>P<br>48VDC<br>500<br>R<br>110VDC<br>3200<br>S<br>120V 60 Hz<br>190(2112 Series)<br>S<br>120V 60Hz<br>285(2122 Series)<br>T<br>240V 60Hz<br>765<br>U<br>115V 400Hz<br>2600<br>Y<br>125VDC<br>3380<br>~~TT~~|
|---|



break ing the NC con tacts and mak ing the NO contacts.  Contacts re main in this position as long as the coil is energized. The pre set time delay period begins as soon as the coil is de-energized, at the end of which the switch re turns to its original po si tion. **No power is** 

**Transients** — Insensitive to transients of ±1500 VAC for 10 mil li sec onds **Dielectric** — 1000V RMS @ 60Hz between non-connected ter mi nals. **Contact Rating (DPDT Contacts)** — 

## **required during the tim ing period.** 

Re-energizing the coil, either during or after the delay period, will immediately start a new cycle with full delay period. 

|**Inductive(Amps)**<br>**Resistive(Amps)**|**30V**<br>**DC**<br>2<br>10|**110V**<br>**DC**<br>.75<br>1|**120V**<br>**60Hz**<br>3<br>10|**120V**<br>**400Hz**<br>2<br>10|**240V**<br>**60Hz**<br>1.5<br>5|
|---|---|---|---|---|---|



**Operation** (Listed values at nom. voltage, 25°C unless noted) 

**Operating Mode** — 

Based on 100,000 operations electrical, 1,000,000 me chan i cal.  Inductive and capacitive load should not have inrush currents that exceed five times normal op er at ing load. **Ambient Temperature Range** — -55°C to +85°C 

**2112** — On-delay (delay on pull-in); **2122** — Off-delay (delay on drop-out) **Timing Adjustment** — All standard models of fer easy lin ear ad just ment over one of nine tim ing ranges listed below. For ap pli ca tions requiring frequent re adjust ment, the external knob model is recommended.  For tamper-proof installation or where readjustment is infrequent, the internal key model may be pre ferred.  This model requires removal of the cover plate for timing ad - just ment.  Her met i cal ly sealed mod els provide a slot ted adjusting screw under the cap nut on the top cover. 

**Weight** — Maximum, any unit - 17 ozs. 

**Mounting/Terminals** — Chassis mounting tabs, octal plugs and external (-4) or in ter nal (-5) adjustment. Panel mounting back plate, internal ad just ment, and solder hook terminals (-9). 

**Timing Ranges** — 

Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. 

||**Code**|**Range**|
|---|---|---|
||A|.03 to .1 sec.|
||B|.1 to .3 sec.|
|C<br>D<br>~~—— ~~||.15 to 1.0 sec.<br>.375 to 3.0 sec.<br> ~~oj~~|
||E<br>F<br>G<br>H<br>J<br>K|.75 to 10.0 sec.<br>1.0 to 30.0 sec.<br>2.0 to 60.0 sec.<br>5.0 to 120.0 sec.<br>5.0 to 180.0 sec.<br>1.5 to 30.0 cycles|
||L|3.0 to 120.0 cycles|



**==> picture [149 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
-4 -5 -9<br>**----- End of picture text -----**<br>


**These are minimum stan dards; where more se vere environmental con di tions must be met, please con sult the factory.** 

12–4 

Catalog 5-1773450-5 Revised 3-13 

USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 

Dimensions are shown for Dimensions are in millimeters reference purposes only. unless otherwise specified. Specifications subject to change. 

For additional support numbers please visit www.te.com 

www.te.com 

Specialty Relays 

**12** 

## **AGASTAT 2100 Series, Miniature Electropneumatic Timing Relay** (Continued) 

## **Outline Dimensions for Industrial Models (Dimensions in inches. Multiply by 25.4 to obtain millimeters.)** 

## **Ordering Information for Industrial Models** 

**==> picture [478 x 197] intentionally omitted <==**

**----- Start of picture text -----**<br>
Typical Part No.  ‰ 21 1 2 D 4 N B<br>1. Basic Series:<br>21 = 2100 Miniature electropneumatic timing relay<br>2. Operation:<br>1 = On-delay 2 = Off-delay<br>3. Contact Arrangement:<br>2 = DPDT (2 form C)<br>4. Operating Voltage:<br>A = AC D = DC<br>5. Physical Characteristics:<br>Code Enclosure Adjustment Connector Mounting<br>4 =  Unsealed External Knob Octal Plug Chassis Mount<br>5 =  Unsealed Internal Key Octal Plug Chassis Mount<br>9 =  Unsealed Internal Key Solder Hook Panel Mount Plate<br>6. Coil Voltage:<br>M = 12VDC N = 28VDC P = 48VDC R = 110VDC Y = 125VDC<br>S = 120VAC, 50/60 Hz. T = 240VAC, 60 Hz.<br>7. Timing Range:<br>A = .03 to .1 sec. C = .15 to 1.0 sec. E = .75 to 10.0 sec. H = 5.0 to 120.0 sec. K = 1.5 to 30.0 cycles<br>B = .1 to .3 sec. D = .375 to 3.0 sec. F = 1.0 to 30.0 sec. J = 5.0 to 180.0 sec. L = 3.0 to 120.0 cycles<br>**----- End of picture text -----**<br>


## **Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.** 

None at present. 

12–5 

Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. 

www.te.com 

Specialty Relays 

## **AGASTAT 2100 Series, Miniature Electropneumatic Timing Relay** (Continued) 

## **Specifications for Hermetically Sealed Models** 

**Dielectric** — Withstands 1,000 Volts RMS at 60 Hz between non-con nect ed terminals. **Other** — AGASTAT Miniature Timing Relays also conform to ap pli ca ble requirements covering: Moisture Ozone Humidity Sunshine Sand/Dust Acoustic Noise Salt Spray Prolonged Storage 

## **Outline Dimensions for Hermetically Sealed Models (In inches. Multiply by 25.4 for millimeters.)** 

**==> picture [94 x 213] intentionally omitted <==**

**----- Start of picture text -----**<br>
8 Pin Solder<br>| Hook or MS/AN<br>2 . 000 Connector<br>| 27/8 —<br>oy [we<br>a | S n O@ =<br>J i} M1A . X.52 2,e 9@<br>e) | oe®*%<br>Panel Mount<br>-H1, -H3<br>Octal Plug (with Internal<br>Adjustment or External<br>Adjustment Knob)<br>18 + 2p 50+)a OCTALPLUG<br>is} Q |<br>woe TS p<br>1.52<br>= ' 060 MAX.<br>Chassis Mount<br>-H2<br>**----- End of picture text -----**<br>


**==> picture [88 x 223] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 . 031 8 Pin Solder<br>Hook or MS/AN<br>Connector<br>!<br>MAX. 1.52 |<br>1 . 152 eaee 6<br>MAX . oe.@098 y— 0<br>| le o Ut<br>Panel Mount<br>-9<br>Octal Plug (with Internal<br>Adjustment or External<br>Adjustment Knob)<br>36; = 2 2 . 505  ———+}<br>S ZI<br>MAX, e 2<br>L M1A.X,52 a<br>Chassis Mount<br>-4, -5<br>**----- End of picture text -----**<br>


12–6 

Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 Specifications subject UK: +44 800 267 666 www.te.com to change. 

For additional support numbers please visit www.te.com 

www.te.com 

Specialty Relays 

## **AGASTAT 2100 Series, Miniature Electropneumatic Timing Relay** (Continued) 

## **Ordering Information for Hermetically Sealed & Unsealed Models** 

|||||**Typical Part No.**|**Typical Part No.**‰|**21**||**1**|**2**||**D**||**H1**|**N**|**B**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|**1. **|**Basic Series:**|||||||||||||||
||21 = 2100 Miniature electropneumatic timing relay|||||||||||||||
|**2. **|**Operation:**|||||||||||||||
||1 = On-delay|2 = Off-delay||||||||||||||
|**3. **|**Contact Arrangement:**|||||||||||||||
||2 = DPDT (2 form C)|||||||||||||||
|**4. Operating Voltage:**|**4. Operating Voltage:**|||||||||||||||
||A = AC|D = DC||||||||||||||
|**5. **|**Physical Characteristics:**|||||||||||||||
||Code<br>Enclosure||Adjustment|Connector|Mounting|||||||||||
||H1 =<br>Hermetically Sealed||External Screw|Solder Hook|Panel Mount Plate|||||||||||
||H2 =<br>Hermetically Sealed||External Screw|Octal Plug|Chassis Mount|||||||||||
||H3 =<br>Hermetically Sealed||External Screw|“AN” Connector|Panel Mount Plate|||||||||||
||4 =<br>Unsealed||External Knob|Octal Plug|Chassis Mount|||||||||||
||5 =<br>Unsealed||Internal Key|Octal Plug|Chassis Mount|||||||||||
||9 =<br>Unsealed||Internal Key|Solder Hook|Panel Mount Plate|||||||||||
|**6. **|**Coil Voltage:**|||||||||||||||
||M = 12VDC|N = 28VDC||P = 48VDC|R = 110VDC|||Y = 125VDC||||||||
||S = 120VAC, 50/60 Hz.|T = 240VAC, 60 Hz.||U = 115VAC, 400 Hz.||||||||||||
|**7. **|**Timing Range:**|||||||||||||||
||A = .03 to .1 sec.|C = .15 to 1.0 sec.||E = .75 to 10.0 sec.|H = 5.0 to 120.0 sec.|||K = 1.5 to 30.0 cycles|||K = 1.5 to 30.0 cycles|||||
||B = .1 to .3 sec.|D = .375 to 3.0 sec.|D = .375 to 3.0 sec.|F = 1.0 to 30.0 sec.|J = 5.0 to 180.0 sec.|||L = 3.0 to 120.0 cycles|L = 3.0 to 120.0 cycles|||||||



## **Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.** 

None at present. 

**12** 

12–7 

Catalog 5-1773450-5 Dimensions are shown for Revised 3-13 reference purposes only. Specifications subject www.te.com to change. 

USA: +1 800 522 6752 For additional support numbers Asia Pacific: +86 0 400 820 6015 please visit www.te.com UK: +44 800 267 666 

Dimensions are in millimeters unless otherwise specified. 

www.te.com