Image not available
Illustrative purposes only
1423008-8
Power Relay, T92 Series
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: TE CONNECTIVITY / PARTNER STOCK
- Product type: Power Relays
- SVHC: No SVHC (21-Jan-2025)
- Product Range: T92 Series
| Delivery and price | |
|---|---|
| Units per pack | 9 |
| Price | 29.27 € |
| Current stock | 500+ |
| Lead time | 30 days |
Datasheet
## **T92 SERIES TWO-POLE POWER RELAY** ## GENERAL PURPOSE HIGH POWER PCB RELAYS ## **FEATURES** - 30/40/50A switching capability - Designed to control compressor loads to 3.5 tons, 110LRA / 25.3FLA - Meets requirements of UL 508 and UL 873 spacings - 8mm through air, 9.5mm over surface - Meets requirements of VDE 8mm spacing, 4kV dielectric coiltocontact - Meets requirements of UL Class F construction - UL approved for 600VAC switching (1.5HP) - Screw terminal version (consult factory for availability, ratings) - Anti-explosive version available (Meets EN 60079-15) - WG version available (Meets EN 60335-1) ## APPLICATIONS - HVAC - Residential / commercial appliances - Industrial controls - Charging ## APPROVALS - UL E214025 - UL E214025 - • CSA LR48471 • VDE 40019600 • TUV R 50083843 0008 • TUV 15090924 002 • TUV 15090883 001 AINW® AE - CSA LR48471 - VDE 40019600 - TUV R 50083843 0008 - TUV 15090924 002 - TUV 15090883 001 Technical data of approved types on request **T92 SERIES TWO-POLE POWER RELAY** GENERAL PURPOSE HIGH POWER PCB RELAYS ## **CONTACT DATA** **==> picture [259 x 19] intentionally omitted <==** **----- Start of picture text -----**<br> Type T92 T92H<br>**----- End of picture text -----**<br> |**Type**|**T92**|**T92H**| |---|---|---| |||| |Contact arrangement|2 form A (NO)<br>2 form C (CO)|2 form A (NO)| |Rated voltage|277VAC|| |Max. switching voltage|600VAC|| |Rated current|30A/40A NO;<br>3A NC|50A NO| |Overload current*|60A NO; 4.5A<br>NC|75A NO| |Contact material|Ag Alloy|| |Min. recommended<br>contact load|500mA (NO), 12VAC or 5VDC<br>100mA (NC), 12VAC or 5VDC|| |Frequency of<br>operation, with load|360 cycles per hour|| |Operate/release time<br>max., including bounce|25/25ms|| |Initial contact resistance|< 100 mΩat 6VDC 1A|| *Note: Minimum electrical endurance 50 cycles ## **CONTACT RATINGS[1)] (T92H TYPE)** |**Type**|**Load**|**Cycles**| |---|---|---| |**UL508**||| |NO|50A, 277VAC, resistive, 85°C|6x103| Note: Coil voltage 12-48VDC covered in UL approval ## **CONTACT RATINGS[1)] (T92 TYPE)** **==> picture [257 x 19] intentionally omitted <==** **----- Start of picture text -----**<br> Type Load Cycles<br>**----- End of picture text -----**<br> |**Type**|**Load**|**Cycles**| |---|---|---| |||| |**UL508**||| |AgCdO||| |NO|40A, 277VAC, resistive|6x10³| |NO|30A, 277VAC, resistive (DC coil only)|250x103| |NO|30A, 277VAC, resistive (AC coil only)|100x103| |NO|10A, 600VAC, resistive|250x103| |NO|1HP, 120VAC|100x103| |NO|3HP, 240VAC|1x103| |NO|1.5HP, 480VAC or 600VAC|100x103| |NO|110LRA/25.3FLA, 240VAC|100x103| |NO|7.3A, 240VAC, pilot duty|100x103| |NO|20A, 28VDC, resistive|100x103| |NO|TV10, 120VAC|25x103| |NC|3A, 277VAC|100x103| |NC|2A, 480VAC, general purpose|100x103| |NC|1A, 600VAC|100x103| **==> picture [263 x 620] intentionally omitted <==** **----- Start of picture text -----**<br> Type Load Cycles<br>AgSnOInO<br>NO 40A, 240VAC, resistive 85°C 50x10 [3]<br>NO 30A, 277VAC, resistive (DC coil only) 250x10 [3]<br>NO 30A, 277VAC, resistive (AC coil only) 100x10 [3]<br>NO 20A, 506VAC, resistive 100x10 [3]<br>1.5HP, 120VAC, 2 pole making/breaking<br>NO 100x10 [3]<br>(Fig.1)<br>NO 3HP, 240VAC, 3 phase (DC coil only) 100x10 [3]<br>NO 3HP, 480VAC, 3 phase (DC coil only) 100x10 [3]<br>NO 2HP, 600VAC, 3 phase (DC coil only) 100x10 [3]<br>Special Ag Alloy X (Cd Free), wash tight<br>NO 30A, 250VAC, resistive 100x103<br>NO 30A, 400VAC, resistive 100x103<br>NO 20A, 480VAC, resistive 100x103<br>VDE<br>AgCdO, flange mount relays<br>NO 20A, 400VAC 100x103<br>NC 3A, 400VAC 30x103<br>CO 20A NO / 3A NC, 400VAC 30x10³<br>TUV<br>Anti-explosion, sealed device<br>NO 30A 250VAC, 25°C 100x103<br>Anti-explosion, enclosed-break device<br>NO 15A 480VAC 100x103<br>ARI 780-86 Endurance Test (section 6.6):<br>HVAC Definite Purpose Contactor Standard<br>Normally Open Contacts<br>Single Phase/Two Pole (Both poles together switching a single<br>load)<br>110 LRA, 25.3 FLA, 200K operations (DC Coil)<br>L1 L2<br>Figure 1 T1 T2<br>Single Phase Per Pole (Single load per pole)<br>110 LRA, 18 FLA, 200K operations (DC Coil).<br>60 LRA, 14 FLA, 200K operations (AC Coil).<br>L1 L2<br>Figure 2 T1 T2<br>Mechanical endurance<br>T92 10x10 [6] ops.<br>T92H 1x10 [6] ops.<br>**----- End of picture text -----**<br> 1) Contact ratings at 25°C (unless otherwise noted) with relay properly vented. FLA, LRA ratings are compatible with 3.5 ton compressor applications. INDUSTRIAL AUTOMATION & ELECTRIFICATION / T92 SERIES TWO-POLE POWER RELAY 2 **T92 SERIES TWO-POLE POWER RELAY** GENERAL PURPOSE HIGH POWER PCB RELAYS ## **COIL DATA** |**COIL DATA**|| |---|---| |Coil voltage range,<br>DC coil/ AC coil|5 to 110VDC; 12 to 240VAC| |Max. coil power|1.7W; 4.0VA| |Max. coil temperature|155°C| |Coil insulation system<br>according UL|class F| ## **COIL VERSIONS, DC COIL (D TYPE)** **==> picture [258 x 48] intentionally omitted <==** **----- Start of picture text -----**<br> Rated<br>Rated Operate Release Coil<br>Coil coil<br>voltage [2)] voltage [3)] voltage resistance<br>code power<br>VDC VDC VDC Ω ±10%<br> W<br>**----- End of picture text -----**<br> |**Coil**<br>**code**|**Rated**<br>**voltage2)**<br>**VDC**|**Operate**<br>**voltage3)**<br>**VDC**|**Release**<br>**voltage**<br>**VDC**|**Coil**<br>**resistance**<br>Ω**±10%**|**Rated**<br>**coil**<br>**power**<br>**W**| |---|---|---|---|---|---| ||||||| |5|5|3.75|0.6|14.9|1.7<br>W/ Min.<br>0.41 W<br>hold| |6|6|4.5|0.6|22|| |9|9|6.75|0.9|48|| |12|12|9|1.2|86|| |18|18|13.5|1.8|197|| |22|22|16.5|2.2|294|| |24|24|18|2.4|350|| |36|36|27|3.6|767|| |48|48|36|4.8|1390|| |110|110|82.5|11|7255|| |120|120|90|12|8514|| ## **COIL VERSIONS, AC COIL (A TYPE)** **==> picture [259 x 48] intentionally omitted <==** **----- Start of picture text -----**<br> Operate Release Rated<br> Rated Coil<br>Coil Frequency voltage voltage coil<br>voltage resistance<br>code Hz VAC, VAC, power<br>VDC Ω ±10%<br>60Hz 60Hz VA<br>**----- End of picture text -----**<br> |**Coil**<br>**code**|**Rated**<br>**voltage**<br>**VDC**|**Frequency**<br>**Hz**|<br>**Operate**<br>**voltage**<br>**VAC,**<br>**60Hz**|<br>**Release**<br>**voltage**<br>**VAC,**<br>**60Hz**|**Coil**<br>**resistance**<br>Ω**±10%**|<br>**Rated**<br>**coil**<br>**power**<br>**VA**| |---|---|---|---|---|---|---| |||||||| |12|12|60|9.6|1.2|9.1|4| |24|24|60|19.2|2.4|36.6|4| |110|110|60|88|11|793|4| |120|110/120|50/60|96|12|950|4| |208|206|60|166.4|20.8|2841|4| |240|220/240|50/60|192|24|3800|4| |277|250/277|50/60|221.6|27.7|5485|4| ## **COIL VERSIONS, AC COIL (F TYPE)** |**Coil**<br>**code**|**Rated**<br>**voltage**<br>**VDC**|<br>**Frequency**<br>**Hz**|<br>**Operate**<br>**voltage**<br>**VAC,**<br>**60Hz**|<br>**Release**<br>**voltage**<br>**VAC,**<br>**60Hz**|<br> <br>**Coil**<br>**resistance**<br>Ω**±10%**|<br>**Rated**<br>**coil**<br>**power**<br>**VA**| |---|---|---|---|---|---|---| |12|12|50|9.6|1.2|11.2|3.5| |24|24|50|19.2|2.4|44.4|3.5| |48|48|50|38.4|4.8|179.2|3.5| |240|240|50|192|24|4355|3.5| All figures are given for coil without preenergization, at ambient temperature +23°C. For A type, 110V/120V, 50/60Hz. Signify 50Hz Operation at Nominal 110V, 60 Hz Operation at Nominal 120V. - 2) For T92H type, after the energization time of 100ms with rated voltage, the coil requires a reduction of the coil voltage to 50% of rated voltage. 3) For Anti-explosion sealed type, the operate voltage is 80% of the rated coil voltage. **==> picture [355 x 157] intentionally omitted <==** **----- Start of picture text -----**<br> 120<br>100<br>80<br>60<br>40<br>20<br> 0<br>70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150<br>Applied Coil Voltage (% of Rated Nominal)<br> DC Coil 0 Amp Contact Load<br> DC Coil 30 Amp Contact Load<br> AC Coil 0 A<br> AC Coil 30 A<br>Max. Allowable Ambient Temp. (°C)<br>**----- End of picture text -----**<br> Note: This chart only apply for T92 standard type. For coil data of T92 Antiexplosion sealed type and T92H type, please contact TE engineering. INDUSTRIAL AUTOMATION & ELECTRIFICATION / T92 SERIES TWO-POLE POWER RELAY 3 **T92 SERIES TWO-POLE POWER RELAY** GENERAL PURPOSE HIGH POWER PCB RELAYS ## **INSULATION DATA** |**INSULATION DATA**|**INSULATION DATA**|| |---|---|---| |Initial dielectric strength||| ||between open contacts|1500Vrms| ||between contact and coil|4000Vrms| ||between adjacent contacts|2000Vrms| |||| |Initial surge withstand voltage||| ||between contact and coil|8kV| |||| |Initial insulation resistance (@500VDC)||| ||between insulated elements|1x109Ω| |||| |Clearance/creepage||| ||between contact and coil|8mm clearance/9.5mm| |||creepage| ## **DIMENSIONS (Unit: mm)** **==> picture [212 x 168] intentionally omitted <==** **----- Start of picture text -----**<br> T92/T92H – Mounting and termination code 1<br>2.06 MAX. 1.36 MAX.<br>(52.32) (34.54)<br>i —<br>1.21 MAX.<br>(30.73) .156 ± 0.012<br>(3.96 ± 0.3)<br>l e e .250 TYP.<br>1.618 ± .020 (6.35)<br>(14.86 ± .13).585 ± .005 (41.10 ± .51).309 ± .005 .032 TYP. .047 TYP.(1.19)<br>(7.85 ± .13) (0.81)<br>Pre-soldering<br>in below side<br>(16.00 ± .13).630 ± .005 1.000 ± .010(25.40 ± .25)<br>|<br>a \ “TE<br>Note: Dimensions of the pins after tin soldering<br>a) +0.3mm for the width and the thickness<br>b) +1.0mm for the length<br>**----- End of picture text -----**<br> T92 – Mounting and termination code 5 **==> picture [182 x 157] intentionally omitted <==** **----- Start of picture text -----**<br> 2.700 MAX.<br>a (68.58) =i<br>1.36 MAX.<br>(34.54)<br>.090 (2.29)<br>RAD. FOR<br>#8 SCREW<br>2.345 ± .005<br>(59.56 ± .13)<br>2.135 MAX. 1.431 MAX.<br>-L— (54.23) —| r (36.34) =<br>2.010 MAX.<br>.913 MAX. po (51.05)<br>(23.19)<br>Jd4, yy<br>**----- End of picture text -----**<br> ## **OTHER DATA** |**OTHER DATA**|| |---|---| |Material compliance|EU RoHS/ELV, China RoHS, REACH,<br>Halogen content refer to the Product<br>Compliance Support Center at<br>www.te.com/customersupport/<br>rohssupportcenter| |Ambient temperature<br>DC coil<br>-55ºC to 85ºC<br>AC coil<br>-55ºC to 65ºC|| |Category of environmental protection<br>IEC 61810<br>RTI - dust protected,<br>RTII - flux proof, RTIII - wash tight|| |Vibration resistance<br>(functional)|1.65mm max amplitude, 10-55 Hz| |Shock resistance<br>(functional)|10G for 11msec| |Shock resistance<br>(destructive)|100g| |Terminal type|PCB / Quick Connect / Screw| |Weight|86g| |Resistance to soldering heat (for PCB Terminal)<br>IEC 60068-2-20<br>260°C, 10s|| |Packaging/unit|tray/30 pcs., box/120 pcs.| T92 – Mounting and termination code 2, 3 and 4 **==> picture [170 x 147] intentionally omitted <==** **----- Start of picture text -----**<br> 2.700 MAX. 1.36 MAX.<br>ee (68.58) ke (34.54)<br>1.04 MAX.(26.42) 1.495 MAX.(37.97)<br>2.05 MAX.<br>(52.07)<br>2.345 ± .005<br>_ (59.56 ± .13) —_<br>1.618 TYP.<br>.585 ± .005 (41.10 ± .51)<br>(14.86 ± .13) .309 ± .005<br>(7.85 ± .13)<br>.090 RAD.<br>(2.29)<br>FOR #8 SCREW<br>.630 TYP. Tha.<br>(16.00)<br>rye | ey<br>ant<br>**----- End of picture text -----**<br> INDUSTRIAL AUTOMATION & ELECTRIFICATION / T92 SERIES TWO-POLE POWER RELAY 4 **T92 SERIES TWO-POLE POWER RELAY** GENERAL PURPOSE HIGH POWER PCB RELAYS ## **PCB LAYOUT** Bottom view on pins **==> picture [193 x 146] intentionally omitted <==** **----- Start of picture text -----**<br> 1.618<br>(41.10)<br>.585<br>.309 (14.86) .185<br>(7.85) (4.70)<br>.365<br>(9.27)<br>.630 1.000<br>(16.00) (25.40)<br>.203 TYP.<br>(5.16) .052 TYP. .072 TYP.<br>(1.32)<br>.162 (1.83)<br>(4.12)<br>**----- End of picture text -----**<br> ## **TERMINAL ASSIGNMENT** **==> picture [221 x 128] intentionally omitted <==** **----- Start of picture text -----**<br> Bottom view on pins<br>2 form A 2 form C<br>0 0<br>2 4 2 4 3<br>6 8 6 8 7<br>1 1<br>**----- End of picture text -----**<br> An alternate PC board layout utilizes .076 ± .003 (1.93 ± .076) diameter holes on the same center-to-center spacing shown above. Use of the rectangular holes is recommended for improved solderability. Only necessary terminals are present on single throw models. Consequently, some holes will be unnecessary for single throw models. ## **PRODUCT CODE STRUCTURE (T92H TYPE)** **Typical product code T92H P 7 D 1 X -12** |||||||||||| |---|---|---|---|---|---|---|---|---|---|---| |**Type**<br>**T92H**<br>Power relay T92 High Performance<br>(50A)<br>**Enclosure**<br>**P**<br>Dust protected plastic case<br>**S**<br>Wash-tight, tape sealed, plastic<br>case (Mounting and termination<br>code 1)<br>**Contact arrangement**<br>**7**<br>2 form A (2 NO)<br>**Coil Input**<br>**D**<br>DC Coil|||||||||**Coil**|| ||||||||||**Coil**<br>**code**|please refer to coil versions table| ||||||||||**Contact material**|| ||||||||||**X**|Special Ag Alloy X (Cd Free)| ||||||||||**Mounting and termination**|| ||||||||||**1**|Printed circuit board mount;<br>printed circuit board terminals.| |||||||||||| |||||||||||| |**D**|DC Coil|||||||||| ## **PRODUCT INFORMATION** **==> picture [526 x 19] intentionally omitted <==** **----- Start of picture text -----**<br> Product code Enclosure Contacts Coil Mounting Contact material Coil Part Number<br>**----- End of picture text -----**<br> |**Product code**|**Enclosure**|**Contacts**|**Coil**|**Mounting**|**Contact material**|**Coil**|**Part Number**| |---|---|---|---|---|---|---|---| ||||||||| |T92HP7D1X-12|Plastic dust<br>cover|2 form A,<br>2 NO|DC|PCB<br>terminals|Special Ag Alloy<br>X (Cd Free)|12VDC|6-1423008-6| |T92HP7D1X-24||||||<br>24VDC|6-1423008-7| |T92HP7D1X-48||||||48VDC|6-1423008-9| Note: This list represents the most common types and does not show all variants covered by this datasheet, other types on request. INDUSTRIAL AUTOMATION & ELECTRIFICATION / T92 SERIES TWO-POLE POWER RELAY 5 **T92 SERIES TWO-POLE POWER RELAY** GENERAL PURPOSE HIGH POWER PCB RELAYS ## **PRODUCT CODE STRUCTURE (T92 TYPE)** |**Typical product code**<br>**T92 S 11 D 2 2 -24 -99**<br>**Type**<br>**T92**<br>Printed circuit board / panel<br>mount power relay T92<br>**Enclosure**<br>**P**<br>Dust protected plastic case<br>**S**<br>Wash-tight, tape sealed, plastic<br>case (Mounting and termination<br>code 1)<br>Wash-tight, glue sealed, plastic<br>case (Mounting and termination<br>code 1, 2 for anti-explosion<br>version)<br>Top sealed, not wash-tight, not<br>tape sealed on bottom (Mounting<br>and termination codes 2, 3 & 4)<br>**Contact arrangement**<br>**7**<br>2 form A (2 NO)<br>**11**<br>2 form C (2 CO)<br>**Coil Input**<br>**A**<br>AC voltage, 60Hz or 50/60 Hz<br>(consult coil versions table)<br>**D**<br>DC voltage<br>**F**<br>AC voltage, 50Hz|**Typical product code**<br>**T92 S 11 D 2 2 -24 -99**<br>**Type**<br>**T92**<br>Printed circuit board / panel<br>mount power relay T92<br>**Enclosure**<br>**P**<br>Dust protected plastic case<br>**S**<br>Wash-tight, tape sealed, plastic<br>case (Mounting and termination<br>code 1)<br>Wash-tight, glue sealed, plastic<br>case (Mounting and termination<br>code 1, 2 for anti-explosion<br>version)<br>Top sealed, not wash-tight, not<br>tape sealed on bottom (Mounting<br>and termination codes 2, 3 & 4)<br>**Contact arrangement**<br>**7**<br>2 form A (2 NO)<br>**11**<br>2 form C (2 CO)<br>**Coil Input**<br>**A**<br>AC voltage, 60Hz or 50/60 Hz<br>(consult coil versions table)<br>**D**<br>DC voltage<br>**F**<br>AC voltage, 50Hz|**Typical product code**<br>**T92 S 11 D 2 2 -24 -99**|**Typical product code**<br>**T92 S 11 D 2 2 -24 -99**|**Typical product code**<br>**T92 S 11 D 2 2 -24 -99**|**Typical product code**<br>**T92 S 11 D 2 2 -24 -99**|**Typical product code**<br>**T92 S 11 D 2 2 -24 -99**|**Customer code**|**Customer code**| |---|---|---|---|---|---|---|---|---| |||||||||| ||||||||**-99**|Anti-explosion1)| ||||||||**-00**|WG version| ||||||||**Coil voltage**|| ||||||||**Coil**<br>**code**|please refer to coil versions table| ||||||||***Contact material**|| ||||||||**2**|AgCdO| ||||||||**4**|AgSnOInO| ||||||||**X**|Special Ag Alloy X (Cd Free)| ||||||||**Mounting and termination**|| ||||||||**1**|Printed circuit board mount;<br>printed circuit board terminals.| ||||||||**2**|Panel mount via fanged cover;<br>.250” (6.35mm) x .032” (.81mm)<br>QC terminal| ||||||||**3**|Panel mount via fanged cover;<br>.187” (4.75mm) x .032” (.81mm)<br>QC terminals for coil and .250”<br>(6.35mm) for contacts| |**A**|AC voltage, 60Hz or 50/60 Hz<br>(consult coil versions table)|||||||| |**D**|DC voltage|||||||| ||||||||**4**|Panel mount via fanged cover,<br>.187” (4.75mm) x .020” (.51mm)<br>QC terminals for coil and .250”<br>(6.35mm) for contacts.| |**F**|AC voltage, 50Hz|||||||| |||||||||| ||||||||**5**|Panel mount via fanged cover,<br>M4 screws w/ captive pressure<br>plates. Requires Enclosure P and<br>Contact arrangement 7.| - *Note. NC contact gold plated 1) Only used for contact material ‘X’. INDUSTRIAL AUTOMATION & ELECTRIFICATION / T92 SERIES TWO-POLE POWER RELAY 6 **T92 SERIES TWO-POLE POWER RELAY** GENERAL PURPOSE HIGH POWER PCB RELAYS ## **PRODUCT INFORMATION** **==> picture [527 x 30] intentionally omitted <==** **----- Start of picture text -----**<br> Contact<br>Product code Enclosure Contacts Coil Mounting Coil Part Number<br>material<br>**----- End of picture text -----**<br> |**Product code**|**Enclosure**|**Contacts**|**Coil**|**Mounting**|**Contact**<br>**material**|**Coil**|**Part Number**| |---|---|---|---|---|---|---|---| ||||||||| |T92P7A22-24|Plastic dust<br>cover|2 form A,<br>2 NO|AC|Panel mount +<br>quick connect|AgCdO|24 VAC|6-1393211-0| |T92P7A22-120||||||120 VAC|5-1393211-7| |T92P7A22-240||||||240 VAC|6-1393211-2| |T92P7A22-277||||||277 VAC|6-1393211-3| |T92P7A24-240|||||AgSnOInO|240 VAC|3-1423008-3| |T92P7A52-120||||Panel mount<br>+ screw<br>terminals|AgCdO|120 VAC|1423008-8| |T92P7A52-240||||||240 VAC|1-1423008-2| |T92P7D12-12|||DC|PCB terminals||12 VDC|6-1393211-5| |T92P7D14-12|||||AgSnOInO|12 VDC|2-1423008-1| |T92P7D12-24|||||AgCdO|24 VDC|6-1393211-6| |T92P7D22-12||||Panel mount +<br>quick connect||12VDC|6-1393211-9| |T92P7D22-24||||||24 VDC|7-1393211-1| |T92P7D22-48||||||48 VDC|7-1393211-2| |T92P7D24-12|||||AgSnOInO|12VDC|2-1423008-2| |T92P7D24-24||||||24 VDC|1423008-9| |T92P7D42-24|||||AgCdO||7-1393211-5| |T92P7D52-12||||Panel mount<br>+ screw<br>terminals||12 VDC|1-1423008-0| |T92P7D52-24||||||24 VDC|1423967-1| |T92P11A12-120||2 form C,<br>2 CO|AC|PCB terminals||120 VAC|3-1393211-8| |T92P11A22-12||||Panel mount +<br>quick connect||12 VAC|3-1393211-9| |T92P11A22-24||||||24 VAC|4-1393211-3| |T92P11A22-120||||||120 VAC|4-1393211-0| |T92P11A22-240||||||240 VAC|4-1393211-4| |T92P11A22-277||||||277 VAC|4-1393211-6| |T92P11A24-240|||||AgSnOInO|240 VAC|3-1423008-7| |T92P11A42-120|||||AgCdO|120VAC|4-1393211-8| |T92P11D12-12|||DC|PCB terminals||12 VDC|5-1393211-0| |T92P11D22-12||||Panel mount +<br>quick connect|||5-1393211-3| |T92P11D22-24||||||24 VDC|5-1393211-4| |T92P11D24-12|||||AgSnOInO|12 VDC|3-1423008-5| |T92P11D24-24||||||24 VDC|3-1423008-6| |T92S7A12-24|Wash tight|2 form A,<br>2 NO|AC|PCB terminals|AgCdO|24 VAC|9-1393211-8| |T92S7A12-120||||||120 VAC|9-1393211-7| |T92S7A12-240||||||240 VAC|9-1393211-9| |T92S7A22-24|Top sealed|||Panel mount +<br>quick connec||24 VAC|1393212-4| |T92S7A22-120||||||120 VAC|1393212-2| |T92S7A22-240||||||240 VAC|1393212-5| INDUSTRIAL AUTOMATION & ELECTRIFICATION / T92 SERIES TWO-POLE POWER RELAY 7 **==> picture [527 x 30] intentionally omitted <==** **----- Start of picture text -----**<br> Contact<br>Product code Enclosure Contacts Coil Mounting Coil Part Number<br>material<br>**----- End of picture text -----**<br> |**Product code**|**Enclosure**|**Contacts**|**Coil**|**Mounting**|**Contact**<br>**material**|**Coil**|**Part Number**| |---|---|---|---|---|---|---|---| ||||||||| |T92S7D12-12|Wash tight|2 form A,<br>2 NO|DC|PCB terminals|AgCdO|12 VDC|1393212-8| |T92S7D12-24||||||24 VDC|1-1393212-0| |T92S7D12-48||||||48 VDC|1-1393212-1| |T92S7D14-12|||||AgSnOInO|12 VDC|1-1423008-6| |T92S7D14-24||||||24 VDC|1-1423008-8| |T92S7D22-12|Top sealed|||Panel mount<br>+ quick<br>connect|AgCdO|12 VDC|1-1393212-4| |T92S7D22-24||||||24 VDC|1-1393212-7| |T92S7D22-110||||||110 VDC|1-1393212-3| |T92S11A12-24|Wash tight|2 form C,<br>2 CO|AC|PCB terminals||24 VAC|8-1393211-1| |T92S11A12-120|Wash tight|2 form C,<br>2 CO|AC|PCB terminals|AgCdO|120 VAC|8-1393211-0| |T92S11A12-240||||||240 VAC|8-1393211-2| |T92S11A22-12|Top sealed|||Panel mount<br>+ quick<br>connect||12 VAC|8-1393211-3| |T92S11A22-24||||||24 VAC|8-1393211-6| |T92S11A22-120||||||120 VAC|8-1393211-4| |T92S11A22-240||||||240 VAC|8-1393211-7| |T92S11D12-12|Wash tight||DC|PCB terminals||12 VDC|8-1393211-9| |T92S11D12-24||||||24 VDC|9-1393211-0| |T92S11D12-48||||||48 VDC|9-1393211-1| |T92S11D12-110||||||110 VDC|8-1393211-8| |T92S11D22-12|Top sealed|||Panel mount<br>+ quick<br>connect||12 VDC|9-1393211-3| |T92S11D22-24||||||24 VDC|9-1393211-4| |T92P7D12-12-99|Plastic dust cover|2 form A,<br>2 NO|DC|PCB terminals|AgCdO|12VDC|2-2071223-3| |T92S7D1X-12-99|Wash tight||||Special Ag<br>Alloy|12VDC|6-1423008-1| |T92S7D2X-12-99||||Panel mount<br>+ quick<br>connect|X (Cd Free)|12VDC|6-1423008-2| |T92S7D12-12-00|Wash tight (WG)||DC|PCB terminals|AgCdO|12VDC|1-2071223-7| Note: This list represents the most common types and does not show all variants covered by this datasheet, other types on request. ## **Notes:** 1. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 2. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions. 3. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. ## **te.com** ## ©2025 TE Connectivity plc. All Rights Reserved. TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks owned or licensed by the TE Connectivity plc. family of companies. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any changes to the information contained herein without prior notice. TE Connectivity assumes only those obligations set forth in the terms and conditions for this product and shall in no event be liable for any incidental, indirect, or consequential damages arising out of the sale, resale, use, or misapplication of the product. TE expressly disclaims any implied warranties with respect to the information contained herein, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. Dimensions, specifications and/or information contained herein are for reference purposes only and are subject to change without notice. Consult TE for the latest dimensions, specifications and/or information. Users of TE Connectivity products must make their own assessment as to whether the respective product is suitable for the respective desired application. 08/25 ED INDUSTRIAL AUTOMATION & ELECTRIFICATION / T92 SERIES TWO-POLE POWER RELAY
Updated at June 4, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →