1048390000

**Data sheet** 

## **OMNIMATE Power - series BV/SV 7.62HP SV 7.62HP/02/90MF2 3.5SN BK BX** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com 

## **Product image** 

Similar to illustration 

90° male header with middle flange with a 7.62 pitch. Meets the requirements of IEC 61800-5-1 and enables UL approval as per UL840 600 V. 

Without a female header, the mating profile guarantees minimum touch safety of >3 mm with 20 N pressure on the test finger. 

The automatically locking middle flange which can optionally also be screwed, reduces space requirements by one pitch width in comparison with conventional solutions. 

On request: available with screw flange or without flange. 

## **General ordering data** 

|Type|SV 7.62HP/02/90MF2 3.5SN BK BX|
|---|---|
|Order No.|1048390000|
|Version|PCB plug-in connector, male header, closed side,|
||Middle flange, THT solder connection, 7.62 mm,|
||No. of poles: 2, 90°, Solder pin length (l): 3.5 mm,|
||tinned, Black, Box|
|GTIN(EAN)|4032248786633|
|Qty.|78pc(s).|
|Product data|IEC: 1000 V / 57 A|
||UL: 300 V/40.5 A|
|Packaging|Box|



Creation date January 18, 2019 3:20:23 AM CET 

Catalogue status 04.01.2019 / We reserve the right to make technical changes. 

1 

**Data sheet** — **OMNIMATE Power - series BV/SV 7.62HP SV 7.62HP/02/90MF2 3.5SN BK BX** 

## **Technical data** ~~Ld~~ 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com ~~a~~ 

## **Dimensions and weights** 

|Height|14.9 mm|Height(inches)|0.587 inch|
|---|---|---|---|
|Height of lowest version|11.4 mm|Depth|28.3 mm|
|Depth (inches)|1.114 inch|Net weight|6.115 g|
|**System specifications**||||
|Product family|OMNIMATE Power - series|Type of connection||
||BV/SV 7.62HP||Board connection|
|Mountingonto the PCB|THT solder connection|Pitch in mm(P)|7.62 mm|
|Pitch in inches(P)|0.3 inch|Outgoingelbow|90°|
|No. ofpoles|2|Number of solderpinsperpole|2|
|Solderpin length(l)|3.5 mm|Solderpin length tolerance|+0.1/-0.3 mm|
|Tolerance of solderpinposition|± 0.1 mm|Solderpin dimensions|0.8 x 1.0 mm|
|Solder eyelet hole diameter(D)|1.3 mm|Solder eyelet hole diameter tolerance(D)<br>+ 0,1 mm||
|L1 in mm|15.24 mm|L1 in inches|0.6 inch|
|Number of rows|1|Pin seriesquantity|1|
|Touch-safe protection acc. to DIN VDE|Touch-safe above the|Touch-safe protection acc. to DIN VDE||
|57 106|printed circuit board|0470|IP 20|
|Volume resistance|2.00 mΩ|Can be coded|Yes|
|Plugging cycles|25|||
|**Material data**||||
|Insulatingmaterial|PA GF|Colour|Black|
|Colour chart(similar)|RAL 9011|Insulatingmaterialgroup|II|
|CTI|≥ 500|Insulation resistance|≥ 108Ω|
|UL 94 flammabilityrating|V-0|Contact material|Copper alloy|
|Contact surface||Layer structure of solder connection|1-3 µm Ni / 4-6 µm Sn|
||tinned||matt|
|Storage temperature,min.|-25 °C|Storage temperature,max.|55 °C|
|Max. relative humidityduringstorage|80 %|Operatingtemperature,min.|-50 °C|
|Operatingtemperature,max.|130 °C|Temperature range,installation,min.|-25 °C|
|Temperature range, installation, max.|130 °C|||
|**Rated data acc. to IEC**||||
|tested acc. to standard||Rated current, min. no. of poles||
||IEC 60664-1,IEC 61984|(Tu=20°C)|57 A|
|Rated current, max. no. of poles||Rated current, min. no. of poles||
|(Tu=20°C)|41 A|(Tu=40°C)|41 A|
|Rated current, max. no. of poles||Rated voltage for surge voltage class /||
|(Tu=40°C)|41 A|pollution degree II/2|1,000 V|
|Rated voltage for surge voltage class /||Rated voltage for surge voltage class /||
|pollution degree III/2|630 V|pollution degree III/3|630 V|
|Rated impulse voltage for surge voltage||Rated impulse voltage for surge voltage||
|class/ pollution degree II/2|6 kV|class/ pollution degree III/2|6 kV|
|Rated impulse voltage for surge voltage||Short-time withstand current resistance||
|class/contamination degree III/3|6 kV||3 x 1s with 420 A|
|Clearance, min.|6.9 mm|Creepage distance, min.|9.6 mm|



Creation date January 18, 2019 3:20:23 AM CET 

Catalogue status 04.01.2019 / We reserve the right to make technical changes. 

2 

**Data sheet** 

## **OMNIMATE Power - series BV/SV 7.62HP SV 7.62HP/02/90MF2 3.5SN BK BX** 

## **Technical data** ~~ass~~ 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com ~~a~~ 

## **Rated data acc. to CSA** 

|**Rated data acc. to CSA**||||
|---|---|---|---|
|Institute (CSA)|Co|Certificate No. (CSA)|200039-1121690|
|Rated voltage(UsegroupB/CSA)|300 V|Rated voltage(UsegroupC/CSA)|300 V|
|Rated voltage(UsegroupD/CSA)|600 V|Rated current(UsegroupB/CSA)|35 A|
|Rated current(UsegroupC/CSA)|35 A|Rated current(UsegroupD/CSA)|5 A|
|Reference to approval values|Specifications are|||
||maximum values, details -|||
||see approval certificate.|||
|**Rated data acc. to UL 1059**||||
|Institute (cURus)|cWAkus|Certificate No. (cURus)|E60693|
|Rated voltage(UsegroupB/UL 1059)|300 V|Rated voltage(UsegroupC/UL 1059)|300 V|
|Rated voltage(UsegroupD/UL 1059)|600 V|Rated current(UsegroupB/UL 1059)|40.5 A|
|Rated current(UsegroupC/UL 1059)|40.5 A|Rated current(UsegroupD/UL 1059)|5 A|
|Clearance distance,min.|6.9 mm|Creepage distance,min.|9.6 mm|
|Reference to approval values|Specifications are|||
||maximum values, details -|||
||see approval certificate.|||
|**Packaging**||||
|Packaging|Box|VPE length|35 mm|
|VPE width|135 mm|VPE height|350 mm|
|**Classifications**||||
|ETIM 4.0|EC002637|ETIM 5.0|EC002637|
|ETIM 6.0|EC002637|eClass 6.2|27-26-07-04|
|eClass 7.1|27-44-04-02|eClass 8.1|27-44-04-02|
|eClass 9.0|27-44-04-02|eClass 9.1|27-44-04-02|
|**Notes**||||
|Notes|• Additional colours on request|||
||• Rated current related to rated cross-section & min. No. of poles.|||
||• P on drawing = pitch|||
||• Rated data refer only to the component itself. Clearance and creepage distances to other components are to|||
||be designed in accordance with the relevant application standards.|||
||• MFX and MSFX: X= Position of the middle flange e.g. MF2, MSF3|||
|IPC conformity|Conformity: The products are developed, manufactured and delivered according international recognized||Conformity: The products are developed, manufactured and delivered according international recognized|
||standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties|standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties||
||in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.|||



Creation date January 18, 2019 3:20:23 AM CET 

Catalogue status 04.01.2019 / We reserve the right to make technical changes. 

3 

**Data sheet** 

## **OMNIMATE Power - series BV/SV 7.62HP SV 7.62HP/02/90MF2 3.5SN BK BX** 

## **Technical data** ~~ass~~ 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com ~~So~~ 

## **Approvals** 

|**Approvals**||
|---|---|
|Approvals|@SALuslill|
|ROHS|Conform|
|**Downloads**||
|Approval/Certificate/Document of||
|Conformity|Declaration of the Manufacturer|
|Brochure/Catalogue|FL DRIVES EN|
||MB DEVICE MANUF. EN|
||FL DRIVES DE|
||CAT 2 PORTFOLIOGUIDE EN|
||FL HEATING ELECTR EN|
||FL APPL_INVERTER EN|
||FL_BASE_STATION_EN|
||FL ELEVATOR EN|
||FL POWER SUPPLY EN|
||FL 72H SAMPLE SER EN|
||PO OMNIMATE EN|
|EngineeringData|EPLAN, WSCAD|
|Engineering Data|SV.zip|
||STEP|
|Motion controllers whitepaper|Download Whitepaper|
|White Paper UL 600 V|Download Whitepaper|



Creation date January 18, 2019 3:20:23 AM CET 

Catalogue status 04.01.2019 / We reserve the right to make technical changes. 

4 

**Data sheet** 

## **OMNIMATE Power - series BV/SV 7.62HP SV 7.62HP/02/90MF2 3.5SN BK BX** 

## **Drawings** 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com 

## **Dimensional drawing** 

Creation date January 18, 2019 3:20:23 AM CET 

Catalogue status 04.01.2019 / We reserve the right to make technical changes. 

5 

**==> picture [1158 x 809] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions without tolerances are no check dimensions The English version is binding<br>allgemeingultige Kundenzeichnung, aktueller Stand nur auf Anfrage /<br>general customer drawing, topical version only if required<br>SHOWN: SV 7.62HP/04/90MSF Ll<br>28.3 -<br>POS. 1 2 3 4 5, 1.114 7 “3 _S PLATINEBOARD 270 3 0.167" 4.3<br>t t 270°VERSION A A rn) | -<br>-~o = V V) 7 , <7 , V V 4 \/ \ V / a<br>Bs3 ae; | |e | | Sma ! yl10.U SO| | a PD<br>se 15 | #62 3.0K 0.41" PLATINE anc —— — ee a _<br>a5 = 0.3 (|. 0198 90°VERSION 7.62 19.8 BOARD 2° i 5 wlio 5 7 cole<br>2 0.3" J. fol aoe 88 do =|<br>2s NUR IN gouce,..» VARIANTEN i “Io °<br>2s an ° : 1.5 | |2:25° 32,5<br>== 0.059" 1.08"<br>22 7.62 40.5<br>oe i i i i —|2 | el ! |<br>5%ees© ©, 1 NS - |<br>os = = xe | d=0.8x1.0 —__<br>eeS25 ——S || PP 5. 0u 3| Sv SV  7.e2nP(06)..WiSiLjFS] 7,62HP/06/...M(S/L)F6 8 [ove fzse || ]fff| | [wmliw]| |||<br>2g222 ] ! 0. 198" ! SV 7,62HP/06/...M(S/L)FS | | | [iw| |<br>35 ae as  e S siiteltiansen SV 7.62HP/06)...M(S/L)F4 45.72 |1.80 | | | |e] | [|<br>oe ONEIN "MSF..." NUR IN VARIANTEN MP= niddle flan SV 7.62HP/06/...M(S/L)F3 Pf ime] | ty<br>25 HOLE PATTERN " OOMLF..." middle flange<br>= 6 ONLY IN TYPES MSF=_Mittelschraubflanschmiddle flange with screw [SV |SV 7-62HP/06/...M(S/L)F2 7.62HP/05/...M(S/L)F5 |Pywe)TTTT[wryff|<br>SeEiSe MLF=_ Mittellotflanschmiddle0 solder flange SVSV 7.62HP/05/...M(S/L)F47.62HP/05/...M(S/L)F3 5 38.10 11.50 |rT| |fuel[MF]| TE| | Td| |<br>22 SV 7.62HP/04/90MF... $V 7.62HP/04/90MLF2...80 SV 7.62HP/03/90MF2... ald date relates ony 10th POB components [SV 7-62HP/08/...M(S/L)F2 | dwell |] tt<br>ss alone. SV 7.62HP/04/...M(S/L)F4 | | | [mF] | | ||<br>23co AZ L E Z Theobservedneccessaryin Connectioncreepagewithandtheclearancerespectivepaths applicantmust bein SV 7.62HP/04/...M(S/L)F3 4 30.48 11.20 el EL<br>= 22 VG L P L E g ZB [Z] [S] iingnns k e e The current-carrying capacity and pitch tolerance is to SV 7.62HP/04/...M(S/L)F2<br> = LA ZA S AZZASF A ZFF be determined according to DIN IEC 326 part 3 very fine. SV 7.62HP/03/...M(S/L)F3 | | ime) | | off<br>ae —S g gE SoG a Z Weidmiller PCB components are tested to the DIN EN 61964 |v 7 g2HP/Q3/,..M(S/L)F2 3 22.86 | [MF | | | | ||<br>223s_ cee~ \& BE ceS standard,povided thattheand arecongoretsvalid for its arefield usegof application. fine intended 8 7.62HP/O2/...M(S/L)F2| . _ 2 ‘(16.24 Jo.6o | [Mel | || ||<br>- securing a electrical, meena. terme an description ,noof [lt [ti | 1 {2/3}ais] ej7 [ale<br>poles [mm] [inch] position MF<br>= Mods Moet M 4:1 GENERAL TOLERANCE: . . - . . Cat.no.:.<br>SV 7.62HP/04/180MF... SV 7.62HP/04/270MF... SV 7.62HP/02/90MF... DIN ISO 2768-m 100489/5 00 S 3 49<br>12.06.18 HELIS_MA Py os a 530 19<br>Z fp I| f Z a : Modifi f Weidmiller n/a Drawing no. Issue no.<br>ZoLi L L Y LALALOFc ay» fh A ZAZiLA etLF oalricationDate Name Sheet 01 of 01 sheets<br>LALIS F LA F Ale 35 Drawn 24.02.2009 HELIS MA<br>cee=a SeeLES~ c e Stiftlange/ Toleranz/ _ | Scale:2:1 CheckedResponsible| 10.07.2018 HERTELKRUG_N SV 7.62HP...M(S/L)F. STIFTLEISTE a<br>pin length tolerance $ ; MALE HEADER<br>L Supersedes: . Approved LANG_T Product file: SV/BVZ 7.62HP 7340<br>**----- End of picture text -----**<br>


## 

**Weidmüller Interface GmbH & Co. KG** Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com 

## **Single Wave:** 

**==> picture [432 x 446] intentionally omitted <==**

**----- Start of picture text -----**<br>
Contact time appr. 3 sec.<br>260 255 °C o s , 260 °C<br>240 250 °C I ~,.N\<br>\ [‘]<br>220 \\ [N] N [N] N<br>LON<br>200180 .\1\\ [.][N] SS\SsN.<br>160 \\\Str ‘\‘S‘S<br>wT “oy, “w<br>140 od° oNs\ "he,a> S.ss<br>12010080 Preheating :o.;7” .’Pua&&Pia4.-As-A.ue<ormeee7eeerrccCi7”Y11hae.~s- 7   appr. 150 °C \ny\\ny\\‘ wy£2.2>""y“ Cooling rate < 6 °K/s SS“>soy.‘s>“sDo~aTa“ss—m~. =~areTaaaooo-<br>;Fe ./4 -.- S.‘<br>6040 ¢Fa¢?me47soMosenooheSa--o “7“7“ ‘‘‘s.SS —=a-. Typical process        Prozess limits<br>20 Sa Heating rate < 3 °K/s “es Temperature on board<br>0<br>0  20  40  60  80  100  120  140  160  180  200  220  240<br>time [s]<br>Double Wave:<br>260 255 °C — 260 °C<br>Total contact time max. 10 sec. Q 250 °C<br>240<br>220<br>200<br>180<br>\<br>160 eee sue\\<br>140120100 Preheating a?’.a”oa a..ue °°&.SS£ 7*.“eS?ny“ocd;7 appr. 150°C [RO\‘\‘\‘‘ NS>NOS.°WSesyO~~>-°°~~ ~~~<br>8060 a?-o7747 *Aefre/&°oo&&4aea7”’ \‘‘‘‘\ Cooling rate < 6 °K/s ‘‘ >cS““Sse°“asD>,-_;-:<br>o* A. “ Typical process<br>40 Prie"7-- neeiteer<r — Process limits<br>20 Heating rate < 3 °K/s Temperature on board<br>0<br>0  20  40  60  80  100  120  140  160  180  200  220  240<br>time [s]<br>Temperature [°C]<br>Temperature  [°C]<br>**----- End of picture text -----**<br>


## 

Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are qualified. 

- PCB thickness 

- Proportion of Cu in the layers 

- Single/double-sided assembly 

- Product range 

- Heating and cooling rates 

soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above maximum profile. 

We reserve the right to make technical changes.