1-1617072-3 .

CII Low Signal Relays 

## **Double Pole, Electrically Held, 2 Amps and Less** (Continued) 

## **.150 Grid-space Hybrid Relays Single Diode, Dual Diode Type 3SBC (2PDT) 135 mW** 

## **Product Facts** 

- n **Low profile… only 0.32 inches high** 

- n **50 milliwatt forms available** n **Qualified to MIL-R-39016/37** n **Qualified to MIL-R-39016/38** n **RF designs available** 

The hybrid .150 Grid-space relay — only 0.32 inches high — saves space in electronic packaging. The pin spacing allows you to insert the relay with no intermediate pin spreader. 

## **Electrical Characteristics** 

**Contact Ratings** — DC resistive — 2 amps at 28 volts (50,000 operations) 1 Amp @ 28 V (100,000 operations) DC inductive — 0.5 amps at 28 volts, 200 mH AC resistive — 0.5 amps at 115 volts AC — 0.125 amps at 115 volts (case grounded) Low-level — 50 µA at 50 mV Peak AC or DC 

**Contact Resistance** — 0.050 ohms max.; 0.150 ohms after life test 

**Life** — 100,000 operations at rated loads listed; 1,000,000 operations at low-level loads 

## **Operating Characteristics** 

**Operate Time** — 4 ms max. **Release Time** — 6 ms max. **Contact Bounce** — 1.5 ms **Dielectric Strength (Note 1)** — 500 volts rms at sea level; 350 volts rms at 70,000 feet and above **Insulation Resistance (Note 1)** — 1,000 megohm min. over temperature range 

**Environmental Characteristics Vibration** — 30G, to 3000 Hz **Shock** — 100 G at 11 ms **Temperature** — -65°C to +125°C 

## **Semiconductor Characteristics at 25°C Diode** — 

Max. Negative Transient — 1.0 volt Breakdown Voltage — 100 VDC @ 10 µA Max. Leakage Current — 1 µA @ 50 VDC See page 1-44 for Mounting Forms, Terminals and Circuit Diagrams. 

## **Ordering Instructions** 

**Example:** The relay selected in the example is a FORM AB .150-grid relay, current calibrated, end bracket mounting with 0.13-inch solder hook header, 210 ohms coil resistance, and 50 mW sensitivity. By choosing the proper code for each of these relay characteristics, the catalog number is 3SBC6131E2. The letter R following sensitivity code indicates relay received 5000 operation miss-test. Ex. 3SBC6131E2R. 

**Note:** Relays specified by catalog numbers (per above directions) are general use items controlled by catalog specifications. Relays to be controlled by customer drawings — or relays having requirements not covered in this publication — will be assigned special catalog numbers upon request. 

***** The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 

1-42 

Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.