1-1617011-7 .

CII Low Signal Relays 

**Operate Time** — 6 ms max. **Release Time** — 5 ms max. **1 Contact Bounce** — 2.5 ms **Dielectric Strength** — 1,000 volts rms at sea level; 700 volts rms across contact gaps; 350 volts rms at 70,000 feet **Insulation Resistance** — 1,000 megohm min. except coil to case 500 min. at 125°C **Environmental Characteristics Vibration** — Depends upon mounting 

## **Double Pole, Electrically Held, 2 Amps and Less** (Continued) 

## **Crystal-Can Relays Type 3SAE (2PDT) Type 3SAC (2PDT)** 

## **Product Facts** 

- n **Small lightweight crystal-can type** 

n **0.25 cubic inch, 0.60 ounces** 

- n **Power or low-level switching** n **20G to 2000 Hz vibration capability** 

The TE Connectivity line of crystal-can relays is backed by years of experience and millions of relays operating in the field. 

## **Electrical Characteristics** 

**Contact Ratings** — 

DC resistive — 2 amps at 28 volts DC inductive — 1 amp at 28 volts, L/R < .025 

Low-level — 50 µA at 50 mV Peak AC or DC 

AC resistive — 1.0 amp at 115 volts, case not grounded AC resistive — 0.25 amps at 115 volts, case grounded 

**Contact Resistance** — 

0.050 ohms max. initial; 

0.100 ohms max. after life test 

**Life** — 100,000 operations at rated load; 1,000,000 at low-level 

## **Operating Characteristics** 

**Vibration** — Depends upon mounting forms **Shock** — 50 G at 11 ms **Temperature** — -65°C to +125°C 

See page 1-46 for Mounting Forms, Terminals and Circuit Diagrams. 

*Values listed are factory test and inspection values. User should allow for meter variations. 

†Applicable over the operating temperature range in circulating air. 

## **Ordering Instructions** 

**Example:** The relay selected in this example is a 2PDT crystal-can relay, voltage calibrated, two-hole side bracket mounting solder hook header, 552 ohms coil resistance, and 330 mW sensitivity. By choos- 

ing the proper code for each of these relay characteristics, the catalog number is identified as 3SAE5041K1. The letter R following sensitivity code indicates relay received 5000 operation miss-test. Ex. 3SAE5041K1R. 

1-45 

Catalog 5-1773450-5 Revised 3-13 

USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 

Dimensions are shown for Dimensions are in millimeters reference purposes only. unless otherwise specified. Specifications subject to change. 

For additional support numbers please visit www.te.com 

www.te.com 

CII Low Signal Relays 

## **Double Pole, Electrically Held, 2 Amps and Less** (Continued) 

**==> picture [96 x 55] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mounting Forms<br>(3SAC, 3SAE)<br>(Vibration note with each<br>form is acceleration from<br>55 to 2000 Hz)<br>**----- End of picture text -----**<br>


## **Header and Connection Diagrams** 

## **Header Types** 

Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. 

1-46 

www.te.com