1-1414147-0

Automotive Relays Plug-in Maxi ISO Relays 

## **Power Relay F7** 

- **Pin assignment similar to ISO 7588 part 1** 

- **Customized versions on request** 

- **24VDC versions with contact gap >0.8mm – Integrated components (e.g. resistor, diode)** 

- **Customized marking/color** 

- **Special covers (e.g. notches, release features, brackets)** 

## Typical applications 

Cross carline up to 70A for example: ABS control, cooling fan, energy management, engine control, glow plug, heated front screen, ignition, lamps: front, rear, fog light, main switch/supply relay. 

**==> picture [28 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
F134J_a_bw<br>**----- End of picture text -----**<br>


## ~~**Contact Data**~~ 

|Contact arrangement|1 form A,|1 form A,|1 form A,|1 form A,|
|---|---|---|---|---|
||1 NO|1 NO||1 NO|
|Contact gap<br>Rated voltage<br>Limiting continuous current<br>23°C<br>85°C|–<br>12VDC<br>70A<br>50A|–<br>24VDC<br>70A<br>50A|>0.8mm<br>24VDC1)<br>70A<br>50A||
|125°C|30A|30A||30A|
|Limiting making current2)|240A|240A||240A|
|Limiting breaking current<br>Limiting short-time current<br>overload current, ISO 8820-33)|70A<br>25A<br>1.35 x 50A, 1800s|||40A|
|||2.00 x 50A, 5s|||
||3.50 x 50A, 0.5s||3.50 x 50A, 0.5s||
||6.00 x 50A, 0.2s||6.00 x 50A, 0.2s||
|Jump start test, ISO 16750-1|24VDC for 5min,||24VDC for 5min,||
||conducting nominal current at 23|||conducting nominal current at 23°C|
|Contact material||Silver based|||
|Min. recommended contact load4)||1A at 5VDC|||
|Initial voltage drop,|||||
|form A (NO) contact at 10A, typ./max.||10/300mV|||
|Frequency of operation at nominal load|Frequency of operation at nominal load<br>6 ops./min (0.1Hz)|6 ops./min (0.1Hz)||6 ops./min (0.1Hz)|
|Operate/release time typ.||7/2ms5)|||
|Electrical endurance6)|||||
|resistive load at 14VDC|>1x105ops.|ops.<br>–||–|
||70A||||
|>2x10|>2x105ops.<br>–|||–|
||50A||||
|resistive load at 28VDC|–|>1x105ops. >1x105ops.|||
|||25A||40A|



## **Max. DC load breaking capacity** 

**==> picture [24 x 4] intentionally omitted <==**

**----- Start of picture text -----**<br>
ECR0629-N<br>**----- End of picture text -----**<br>


Switching current [A] ———p» Load limit curve: safe shutdown, no stationary arc/make contact. Load limit curve measured with low inductive resistors verified for 1000 switching events. 

## ~~**Contact Data** (continued)~~ 

## >1x10[6] ops. 

## Mechanical endurance 

- 1)  Special high performance 24VDC version with contact gap >0.8mm. 

- 2)  The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of maximum 3s for a make/break ratio of 1:10. 

- 3)  Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 

- 4)  See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 

- 5)  For unsuppressed relay coil. Any parallel device to the coil will increase the release time. 

- 6)  Electrical endurance data is not valid for diode versions. Any diode or pn-junction parallel to the coil (internal or external) will significantly decrease the electrical lifetime, especially when used for inductive loads. 

## ~~**Coil Data**~~ 

## Rated coil voltage 12VDC, 24VDC 

|**Coil versions, DC coil**|**Coil versions, DC coil**|||||
|---|---|---|---|---|---|
|Coil|Rated|Operate|Release|Coil|Rated coil|
|code|voltage|voltage|voltage|resistance7)|power7)|
||VDC|VDC|VDC|Ω±10%|W|
|052|12|7.2|1.6|90|1.6|
|053|24|14.4|3.2|324|1.8|
|065|24|14.4|2.4|288|2.0|
|165|24|16.0|4.0|288|2.0|



7) Without components in parallel. 

All figures are given for coil without pre-energization, at ambient temperature +23°C. 

## **Coil operating range** 

**==> picture [28 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
TEVF4_OVR1<br>**----- End of picture text -----**<br>


Does not take into account the temperature rise due to the contact current E = pre-energization. 

1 

Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Catalog and product data is subject to the Catalog, product data, ‘Definitions’ section, terms of the disclaimer and all chapters of application notes and all specifications are the ‘Definitions’ section, available at subject to change. http://relays.te.com/definitions 

12-2017, Rev.1217 www.te.com © 2017 TE Connectivity. 

Automotive Relays Plug-in Maxi ISO Relays 

## **Power Relay F7** (Continued) 

|~~**Insulation Data**~~|||||~~**Other Data**(continued)~~||
|---|---|---|---|---|---|---|
|Initial dielectric strength|||||Shock resistance (functional)||
|between open contacts|||500Vrms||IEC 60068-2-27 (half sine)|6ms, min. 30g.9)|
|between contact and coil|||500Vrms||Drop test, free fall||
|between adjacent contacts|||500Vrms||IEC 60068-2-32|1m onto concrete|
|Load dump test|||||Terminal type|plug-in, QC/ PCB|
|ISO 7637-1 (12VDC), test pulse 5|ISO 7637-1 (12VDC), test pulse 5||Vs=+86.5VDC||Cover retention||
|ISO 7637-2 (24VDC), test pulse 5|2 (24VDC), test pulse 5||Vs=+200VDC||pull force|150N|
||||||push force|200N|
||||||Terminal retention||
|~~**Other Data**~~|||||pull force|150N|
|EU RoHS/ELV compliance|||compliant||push force|150N|
|Protection to heat and fire according UL-94|||HB or better8)||resistance to bending|10N10)|
|Ambient temperature|||-40 to 125°C||force applied to side|10N10)|
|Climatic cycling with condensation|||||torque|0.3Nm|
|EN ISO 6988||6 cycles, storage 8/16h|||Weight|approx. 38g (1.3oz)|
|Temperature cycling,|||||Resistance to soldering heat  THT||
|IEC 60068-2-14, Nb|10 cycles, -40/+85°C (5°C/min)||||IEC 60068-2-20|260°C, 10s|
|Damp heat cyclic,|||||Packaging unit||
|IEC 60068-2-30, Db, Variant 1|6 cycles, upper air temp. 55°C|6 cycles, upper air temp. 55°C|||plug-in:|210 pcs.|
|Damp heat constant, IEC 60068-2-3, Ca|3, Ca|3, Ca|56 days||plug-in with bracket:|208 pcs.|
|Category of environmental protection,|Category of environmental protection,||||PCB|315 pcs.|
|IEC 61810|||RTI – dustproof||08) Refers to used materials.||
|Degree of protection, IEC 60529<br>Corrosive gas<br>IEC 60068-2-42<br>IEC 60068-2-43|IP54 (dustproof)<br>10±2cm3/m3SO2, 10 days<br>1±0.3cm3/m3H2S, 10 days||||09) No change in the switching state >10μs. Valid for NC contacts, NO contact values<br>significantly higher.<br>10) Values apply 2mm from the end of the terminal. When the force is removed, the<br>terminal must not have moved by more than 0.3mm.||
|Vibration resistance (functional)|||||||
|IEC 60068-2-6 (sine sweep)||10 to 500Hz, min. 5g8)|||~~**Accessories**~~||



09) No change in the switching state >10μs. Valid for NC contacts, NO contact values significantly higher. 

10) Values apply 2mm from the end of the terminal. When the force is removed, the terminal must not have moved by more than 0.3mm. 

~~**Accessories**~~ For details see datasheet Connectors for Maxi ISO Relays 

## **Terminal Assignment** 

**==> picture [305 x 90] intentionally omitted <==**

**----- Start of picture text -----**<br>
NO  NOR  NOD<br>1 form A, NO 1 form A, NO with resistor 1 form A, NO with diode<br>85 87 85 87 85 87<br>p p e y<br>86 30 86 30 86 30<br>**----- End of picture text -----**<br>


## **Dimensions** 

Power Relay F7 with quick connect terminals similar to ISO 8092-1 

**==> picture [116 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
View of the terminals (bottom view)<br>**----- End of picture text -----**<br>


**==> picture [452 x 241] intentionally omitted <==**

**----- Start of picture text -----**<br>
25.9 ±0.3<br>15 ±0.1<br>6 ±0.4<br>5.3 ±0.1 4 ±0.2<br>16 ±0.5 25.9 ±0.3 TE1103-411<br>uf) TL<br>poy —4 _<br>24.9 ±0.3<br>Measurement<br>reference plane 341038 Tas at oss<br>4x<br>11 ±0.5 0.3<br>17 +1/-0.5<br>ø 1.7 +0.2<br>\ A | —~ | 6.3 ±0.1 2.7 20.5<br>0.8 ±0.05<br>9.5 ±0.1 1.2 ±0.05<br>12-2017, Rev. 1217 Catalog and product specification according  Catalog and product data is subject to the<br>www.te.com to IEC 61810-1 and to be used only together  terms of the disclaimer and all chapters of<br>© 2017 TE Connectivity. with the ‘Definitions’ section. the ‘Definitions’ section, available at  subject to change.<br>**----- End of picture text -----**<br>


Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

2 

Automotive Relays Plug-in Maxi ISO Relays 

## **Power Relay F7** (Continued) 

## **Dimensions** (continued) 

**==> picture [515 x 473] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Power Relay F7 with PCB terminals|View of the terminals (bottom view)|Mounting hole layout (bottom view)|
|3.8|3.8|
|26.2 MAX.|26.2 MAX.|
|6x  Ø 2.18|
|30|
|17.9|
|8.4|
|25.2 MAX.|
|85|86|2.7|
|87|3.8|
|3.0|2x  Ø 1.93|
|8.5|
|Joe|3.8|&|
|1.5|
|TE2104-H1|17.0|TE2105-Q2|
|TIN PLATED|et|Pea|a|Tt|
|3.8|
|Product code structure|Typical product code|V23134|-J|0|052 -D642|
|Type|
|V23134|Power Relay F|
|Contact arrangement|
|J|1 form A, 1 NO|
|Cover|
|0|Standard|1|Bracket at terminal 30 ISO|
|2|Bracket near terminal 86 ISO|
|Coil|
|052|12VDC|053|24VDC|
|165|24VDC|065|24VDC|
|—l|
|Terminal/arrangement|
|D642|Plug-in/NO|Xnnn|Customized (nnn: version number)|
|Production in Europe|(only)|
|Product code|Arrangement|Cover|Coil suppr.|Circuit|[1)]|Coil|Contact mat.|Terminals|Part number|
|V23134-J0052-D642|1 form A, 1 NO|Standard|NO|12VDC|Silver based|Plug-in, QC|7-1393303-3|
|V23134-J0052-X429|Resistor 680Ω|NOR|1-1414147-0|
|V23134-J0052-X439|Diode (cathode 86)|NOD|1-1414286-0|
|V23134-J0052-X455|Resistor 470Ω|NOR|PCB|1-1414610-0|
|V23134-J0052-X511|NO|3-1415001-2|
|V23134-J0052-X461|[3)]|Resistor 560Ω|NOR|Plug-in, QC|1-1414469-0|
|V23134-J0053-D642|NO|24VDC|9-1393303-7|
|V23134-J0065-X497|[4)]|PCB|3-1414937-3|
|V23134-J0165-X537|[2)3)]|Resistor 1200Ω|NOR|Plug-in, QC|3-1904117-4|
|V23134-J1052-D642|Bracket|NO|12VDC|0-1393304-9|
|V23134-J1052-X281|Resistor 560Ω|NOR|1-1393304-0|
|V23134-J1053-D642|NO|24VDC|1-1393304-1|
|V23134-J2165-X538|[2)3)]|Resistor 1200Ω|NOR|3-1904117-5|

**----- End of picture text -----**<br>


## **Production in Europe** (only) 

- 1) See terminal assignment diagrams. 3) Special feature: 14.5mm load terminals. 

- 2) Special feature: contact gap >0.8mm. Other types on request. 

- 4) Packed in tray with 300 pcs. per unit. 

This list represents the most common types and does not show all variants covered by this datasheet. 

## **Production in Asia** (only) 

**==> picture [509 x 52] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Product code|Arrangement|Cover|Coil suppr.|Circuit|[1)]|Coil|Contact mat.|Terminals|Part number|
|V23134-J0052-D642|1 form A, 1 NO|Standard|NO|12VDC|Silver based|Plug-in, QC|7-1904094-7|
|V23134-J0052-X429|Resistor 680Ω|NOR|7-1904094-8|
|V23134-J0052-X439|Diode (cathode 86)|NOD|7-1904094-9|
|V23134-J0052-X461|[3)]|Resistor 560Ω|NOR|8-1904094-0|
|V23134-J0053-D642|NO|24VDC|8-1904094-3|

**----- End of picture text -----**<br>


- 1) See terminal assignment diagrams. 3) Special feature: 14.5mm load terminals. 

- 2) Special feature: contact gap >0.8mm. Other types on request. 

This list represents the most common types and does not show all variants covered by this datasheet. 

3 

Catalog and product specification according Catalog and product data is subject to the to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of with the ‘Definitions’ section. the ‘Definitions’ section, available at http://relays.te.com/definitions 

Catalog, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

12-2017, Rev.1217 www.te.com 

© 2017 TE Connectivity.