1-1393315-1

Automotive Relays High Current Devices 

## **High Current Relay 150** 

> n **Limiting continuous current 130A at 85°C** 

> n **Current switching ability up to 300A** 

> n **Suitable for voltage levels up to 24VDC** 

> n **Heat, moisture and vibration resistant** 

> n **Minimal contact resistance** 

> n **Dustproof and sealed versions** 

## Typical applications 

Engine control, glow plug, heated front screen, preheating systems (e.g. for diesel engines, catalytic converters), switches for loading ramps, start/stop. 

**==> picture [28 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
F132_fcw2b<br>**----- End of picture text -----**<br>


## ~~**Contact Data**~~ 

|Contact arrangement|1 form A, 1 NO|
|---|---|
||1 form B, 1 NC|
||1 form C, 1 CO|
||1 form X, 1 NO DM|
|Rated voltage|12VDC/24VDC|
|Max. switching voltage<br>depends on load parametersA)||
|Rated current, cable 25mm2|130A at 85°C|
|Limiting continuous current||
|23°C, load cable 16mm2|130A|
|85°C, load cable 16mm2|120A|
|125°C, load cable 16mm2|60A|
|23°C, load cable 25mm2|180A|
|85°C, load cable 25mm2|130A|
|125°C, load cable 25mm2|70A|
|Limiting making current, load current max. 3s on,<br>make/break ratio 1:10<br>300A<br>Limiting breaking current<br>300A<br>Contact material<br>AgSnO2<br>Min. recommended contact load4)<br>1A at 5VDC<br>Initial voltage drop, typ. at 100A<br>70mV<br>Frequency of operation, with/without load<br>6 ops./min<br>Operate/release time typ. at nominal voltage<br>25/8ms<br>Electrical endurance<br>form A contact (NO), resistive load,<br>cyclic temperature:+23°C<br>>5x104cycles at 300A, 13.5VDC<br>Mechanical endurance<br>>107ops.<br>A)  Please contact TE relay application engineer.<br>~~TO~~<br>~~ee~~<br>~~ee~~<br>~~SSS~~SS~~TTT~~<br>~~ce~~||



## ~~**Coil Data**~~ 

|Rated coil voltage|||12/24VDC||
|---|---|---|---|---|
|Rated coil power|||3.3W1)||
|Max. coil temperature|||155°C||
|**Coil versions, DC coil1)**|||||
|Coil<br>Rated|Operate|Release|Coil|Rated coil|
|code<br>voltage|voltage|voltage|resistance|power|
|VDC|VDC|VDC|Ω±10%|W|
|001<br>12|7.2|1.2|37|3.9|
|002<br>24|14.4|2.4|141|4.1|



1) With resistor. 

All figures are given for coil without preenergization, at ambient temperature +23°C. 

## **Coil operating range** 

300 ECR1449-V 

Does not take into account the temperature rise due to the contact current E = pre-energization 

## ~~**Insulation Data**~~ 

|Initial dielectric strength||
|---|---|
|between contact and coil|1000VACrms|
|Load dump test||
|ISO 7637-1 (12VDC), test pulse 5|Vs=+86.5VDC|
|ISO 7637-2 (24VDC), test pulse 5|Vs=+200VDC|



1 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

03-2014, Rev. 0314 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Automotive Relays High Current Devices 

## **High Current Relay 150** (Continued) 

|~~**Other Data**~~|||~~**Other Data**(continued)~~||
|---|---|---|---|---|
|EU RoHS/ELV compliance|compliant||Terminal type|screw|
|Ambient temperature|-40°C to +125°C||Cover retention||
|Dry heat, IEC 60068-2-2|500h at 100°C||pull force|500N|
|Damp heat constant,|||push force|500N|
|IEC 60068-2-3 (78), Ca|500h, 40°C, 93% RH||Terminal retention||
|Degree of protection|||pull force|150N|
|dustproof:|IP54 (IEC 60529), RT I (IEC 61810)||push force|150N|
|sealed:|sealing in accordance with IEC 68||resistance to bending|20N|
|immersion cleanable:|IP67 (IEC 60529), RT III (IEC 61810)||force applied to side|20N|
|Corrosive gas|||torque|5Nm|
|IEC 60068-2-42|10 days||Weight|approx. 220g (7.8oz)|
|IEC 60068-2-43|10 days||Packaging unit|50 pcs.|
|Vibration resistance (functional)|||2) No change in the switching state >10µs.||
|IEC 60068-2-6 (sine sweep)|10 to 200Hz >5g2)||||
|Shock resistance (functional)|||||
|IEC 60068-2-27 (half sine)|6ms >20g2)||||
|Drop test, free fall|||||
|IEC 60068-2-32|1m onto concrete||||



## **Terminal Assignment** 

**==> picture [518 x 346] intentionally omitted <==**

**----- Start of picture text -----**<br>
NOR  COR  NOBRR<br>1 form A, 1 NO with resistor 1 form C, 1 CO with resistor 1 form X, 1 NO DM with resistor<br>2 5 2 5 4 2 5 5b<br>| A<br>1 3 1 3 1<br>Dimensions View of the terminals<br>NO and NO DM version Bottom view<br>84<br>63 40 15.5<br>7.5 x 6.5<br>= Cr<br>45 *)<br>65.2<br>13.5 71<br>JO wR<br>Ø 6.5<br>TE1667-61<br>Connector LN TE1666-X1<br>2-pole 17 Screw terminals M6 *) Alternatively 5b for form X, 1 NO DM with resistor.<br>Connector Information<br>AMP SUPERSEAL 1.5 SERIES<br>Coil side<br>**----- End of picture text -----**<br>


**Dimensions** NO and NO DM version Bottom view 

- Receptacle connector 282080-1 

- Single wire seal 281934-2 

- Contact 282110-1 Load side Cable lug M6, maximum cable section 25 mm² 

2 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

03-2014, Rev. 0314 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Automotive Relays High Current Devices 

## **High Current Relay 150** (Continued) 

## **Dimensions** 

CO version 

**==> picture [373 x 28] intentionally omitted <==**

**----- Start of picture text -----**<br>
Load terminals<br>2 pole tab connector  Screw M6<br>TE AMP MCP 1.2 17. | 17 ~ Max. torsion of<br>screw bolts: 5Nm 132CO_DD1<br>**----- End of picture text -----**<br>


## **View of the terminals** 

Bottom view 

|**Product code structure**|**Product code structure**|||Typical product code|**V23132**|**-A2**|**001**|**-A**|**2**|**00**|
|---|---|---|---|---|---|---|---|---|---|---|
|**Type**|||||||||||
|**V23132**High Current Relay 150|||||||||||
|**Contact arrangement**|||||||||||
|**A2**|1 form A, 1 NO|**D2**|1 form B, 1 NC||||||||
|**B2**|1 form X, 1 NO DM|**E2**|1 form C, 1 CO||||||||
|**Coil**|||||||||||
|**001**|**001**<br>12VDC|**002**|24VDC||||||||
|**Protection class**|**Protection class**||||||||||
|**A**|IP54|**B**|IP67||||||||
|**Contact material**|||||||||||
|**2**|AgSnO2||||||||||
|**Standard version**|||||||||||
|**00**|Standard||||||||||



|V23132-A2001-A200<br>V23132-A2001-A200-EV-USBX*)<br>V23132-A2001-B200<br>V23132-A2001-B200-EV-USBX*)<br>V23132-B2002-A200<br>V23132-B2002-B200<br>V23132-B2002-B200-EV-USBX*)<br>V23132-D2001-B200<br>V23132-E2001-A200|**Arrangement**<br>1 form A, 1 NO|12VDC|NOR|**Coil suppr.**<br>Resistor|IP54|AgSnO2|Screw|1393315-2<br>7-1414968-8*)<br>1416010-1<br>2-1414939-2*)<br>1393315-9<br>1-1393315-1<br>5-1414968-1*)<br>on request<br>9-1415001-5|
|---|---|---|---|---|---|---|---|---|
||||||IP67||||
||1 form X, 1 NO DM|24VDC|NOBRR||IP54||||
||||||IP67||||
||1 form B, 1 NC|12VDC|NCR||||||
||1 form C, 1 CO|12VDC|COR||IP54||||



Other types on request. This list represents the most common types and does not show all variants covered by this datasheet. 

*) Americas market only. 

3 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

03-2014, Rev. 0314 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions