1-1393304-8

Automotive Relays Plug-in Maxi ISO Relays 

## **Power Relay F7** 

- n **Pin assignment similar to ISO 7588 part 1** 

- n **Customized versions on request** 

- **24VDC versions with contact gap >0.8mm – Integrated components (e.g. resistor, diode)** 

- **Customized marking/color** 

- **Special covers (e.g. notches, release features, brackets)** 

## Typical applications 

Cross carline up to 70A for example: ABS control, cooling fan, energy management, engine control, glow plug, heated front screen, ignition, lamps: front, rear, fog light, main switch/supply relay. 

**==> picture [28 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
F134J_a_bw<br>**----- End of picture text -----**<br>


## ~~**Contact Data**~~ 

|Contact arrangement|1 form A,|1 form A,|1 form A,|1 form A,|
|---|---|---|---|---|
||1 NO|1 NO||1 NO|
|Contact gap<br>Rated voltage<br>Limiting continuous current<br>23°C<br>85°C|–<br>12VDC<br>70A<br>50A|–<br>24VDC<br>70A<br>50A|>0.8mm<br>24VDC1)<br>70A<br>50A||
|125°C|30A|30A||30A|
|Limiting making current2)|240A|240A||240A|
|Limiting breaking current<br>Limiting short-time current|70A|25A||40A|
|overload current, ISO 8820-33)|1.35 x 50A, 1800s||||
|||2.00 x 50A, 5s|||
||3.50 x 50A, 0.5s||3.50 x 50A, 0.5s||
||6.00 x 50A, 0.2s||6.00 x 50A, 0.2s||
|Jump start test, ISO 16750-1|24VDC for 5min,||24VDC for 5min,||
||conducting nominal current at 23|||conducting nominal current at 23°C|
|Contact material||Silver based|||
|Min. recommended contact load4)||1A at 5VDC|||
|Initial voltage drop,|||||
|form A (NO) contact at 10A, typ./max.||10/300mV|||
|Frequency of operation at nominal load|Frequency of operation at nominal load<br>6 ops./min (0.1Hz)|6 ops./min (0.1Hz)||6 ops./min (0.1Hz)|
|Operate/release time typ.||7/2ms5)|||
|Electrical endurance|||||
|resistive load at 14VDC|>1x105ops.|ops.<br>–||–|
||70A||||
|>2x10|>2x105ops.<br>–|||–|
||50A||||
|resistive load at 28VDC|–|>1x105ops. >1x105ops.|||
|||25A||40A|



## **Max. DC load breaking capacity** 

**==> picture [24 x 4] intentionally omitted <==**

**----- Start of picture text -----**<br>
ECR0629-N<br>**----- End of picture text -----**<br>


Switching current [A] ———p» Load limit curve: safe shutdown, no stationary arc/make contact. Load limit curve measured with low inductive resistors verified for 1000 switching events. 

## ~~**Contact Data** (continued)~~ 

Mechanical endurance >1x10[7] ops. 

- 1)  Special high performance 24VDC version with contact gap >0.8mm. 

- 2)  The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of maximum 3s for a make/break ratio of 1:10. 

- 3)  Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 

- 4)  See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 

- 5)  For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher risk of contact tack welding. 

## ~~**Coil Data**~~ 

Rated coil voltage 12VDC, 24VDC 

|**Coil versions, DC coil**|**Coil versions, DC coil**|||||
|---|---|---|---|---|---|
|Coil|Rated|Operate|Release|Coil|Rated coil|
|code|voltage|voltage|voltage|resistance6)|power6)|
||VDC|VDC|VDC|Ω±10%|W|
|052|12|7.2|1.6|90|1.6|
|053|24|14.4|3.2|324|1.8|
|056|24|16.0|4.0|268|2.1|
|065|24|14.4|2.4|288|2.0|



6) Without components in parallel. 

All figures are given for coil without pre-energization, at ambient temperature +23°C. 

## **Coil operating range** 

**==> picture [28 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
TEVF4_OVR1<br>**----- End of picture text -----**<br>


Does not take into account the temperature rise due to the contact current E = pre-energization. 

1 

Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Catalog, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

03-2015, Rev. 0315 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 

Automotive Relays Plug-in Maxi ISO Relays 

## **Power Relay F7** (Continued) 

|~~**Insulation Data**~~|||||~~**Other Data**(continued)~~||
|---|---|---|---|---|---|---|
|Initial dielectric strength|||||Shock resistance (functional)||
|between open contacts|||500Vrms||IEC 60068-2-27 (half sine)|6ms, min. 30g.8)|
|between contact and coil|||500Vrms||Drop test, free fall||
|between adjacent contacts|||500Vrms||IEC 60068-2-32|1m onto concrete|
|Load dump test|||||Terminal type|plug-in, QC/ PCB|
|ISO 7637-1 (12VDC), test pulse 5|ISO 7637-1 (12VDC), test pulse 5||Vs=+86.5VDC||Cover retention||
|ISO 7637-2 (24VDC), test pulse 5|2 (24VDC), test pulse 5||Vs=+200VDC||axial force|150N|
||||||pull force|150N|
||||||push force|150N|
|~~**Other Data**~~|||||Terminal retention||
|EU RoHS/ELV compliance|||compliant||pull force|100N|
|Protection to heat and fire according UL-94|||HB or better7)||push force|100N|
|Ambient temperature|||-40 to 125°C||resistance to bending|10N9)|
|Climatic cycling with condensation|||||force applied to side|10N9)|
|EN ISO 6988||6 cycles, storage 8/16h|||torque|0.3Nm|
|Temperature cycling,|||||Weight|approx. 38g (1.3oz)|
|IEC 60068-2-14, Nb|10 cycles, -40/+85°C (5°C/min)||||Resistance to soldering heat  THT||
|Damp heat cyclic,|||||IEC 60068-2-20|260°C, 10s|
|IEC 60068-2-30, Db, Variant 1|6 cycles, upper air temp. 55°C|6 cycles, upper air temp. 55°C|||Packaging unit||
|Damp heat constant, IEC 60068-2-3, Ca|3, Ca|3, Ca|56 days||plug-in:|210 pcs.|
|Category of environmental protection,|Category of environmental protection,||||plug-in with bracket:|208 pcs.|
|IEC 61810|RTI – dustproof, RT III – sealed||||PCB|315 pcs.|
|Degree of protection, IEC 60529|IP54 (dustproof), IP67 (sealed)||||7) Refers to used materials.||
|Corrosive gas<br>IEC 60068-2-42<br>IEC 60068-2-43<br>Vibration resistance (functional)|10±2cm3/m3SO2, 10 days<br>1±0.3cm3/m3H2S, 10 days||||8)  No change in the switching state >1μs. Valid for NC contacts, NO contact values<br>significantly higher.<br>9)  Values apply 2mm from the end of the terminal. When the force is removed, the terminal<br>must not have moved by more than 0.3mm.||
|IEC 60068-2-6 (sine sweep)||10 to 500Hz, min. 5g8)|||||



- 8)  No change in the switching state >1μs. Valid for NC contacts, NO contact values significantly higher. 

- 9)  Values apply 2mm from the end of the terminal. When the force is removed, the terminal must not have moved by more than 0.3mm. 

~~**Accessories**~~ For details see datasheet Connectors for Maxi ISO Relays 

## **Terminal Assignment** 

NO NOR 1 form A, NO 1 form A, NO with resistor 

**==> picture [167 x 62] intentionally omitted <==**

**----- Start of picture text -----**<br>
85 87 85 87<br>p e y<br>86 30 86 30<br>**----- End of picture text -----**<br>


**==> picture [82 x 17] intentionally omitted <==**

**----- Start of picture text -----**<br>
NOD<br>1 form A, NO with diode<br>**----- End of picture text -----**<br>


**==> picture [48 x 62] intentionally omitted <==**

**----- Start of picture text -----**<br>
85 87<br>86 30<br>**----- End of picture text -----**<br>


## **Dimensions** 

Power Relay F7 with quick connect terminals similar to ISO 8092-1 

**==> picture [116 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
View of the terminals (bottom view)<br>**----- End of picture text -----**<br>


**==> picture [452 x 203] intentionally omitted <==**

**----- Start of picture text -----**<br>
25.9 ±0.3<br>15 ±0.1<br>6 ±0.4<br>5.3 ±0.1 4 ±0.2<br>16 ±0.5 25.9 ±0.3 TE1103-411<br>uf) TL<br>poy —4 _<br>24.9 ±0.3<br>Measurement<br>reference plane 341038 Tas at oss<br>4x<br>11 ±0.5 0.3<br>17 +1/-0.5<br>ø 1.7 +0.2<br>| A | —~ | 6.3 ±0.1 2.7 20.5<br>0.8 ±0.05<br>9.5 ±0.1 1.2 ±0.05<br>**----- End of picture text -----**<br>


03-2015, Rev. 0315 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 

Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

2 

Automotive Relays Plug-in Maxi ISO Relays 

## **Power Relay F7** (Continued) 

**Dimensions** (continued) 

|26.2 MAX.<br>3.0<br>1.5<br>25.2 MAX.<br>26.2 MAX.<br>3.8<br>TIN PLATED<br>TE2104-H1<br>2.7<br>86<br>87<br>30<br>85<br>17.9<br>8.4<br>2x  Ø 1.93<br>17.0<br>3.8<br>8.5<br>3.8<br>6x  Ø 2.18<br>3.8<br>3.8<br>TE2105-Q2<br>Joe<br>~~&~~<br>et<br>Pea<br>a<br>Tt|26.2 MAX.<br>3.0<br>1.5<br>25.2 MAX.<br>26.2 MAX.<br>3.8<br>TIN PLATED<br>TE2104-H1<br>2.7<br>86<br>87<br>30<br>85<br>17.9<br>8.4<br>2x  Ø 1.93<br>17.0<br>3.8<br>8.5<br>3.8<br>6x  Ø 2.18<br>3.8<br>3.8<br>TE2105-Q2<br>Joe<br>~~&~~<br>et<br>Pea<br>a<br>Tt|26.2 MAX.<br>3.0<br>1.5<br>25.2 MAX.<br>26.2 MAX.<br>3.8<br>TIN PLATED<br>TE2104-H1<br>2.7<br>86<br>87<br>30<br>85<br>17.9<br>8.4<br>2x  Ø 1.93<br>17.0<br>3.8<br>8.5<br>3.8<br>6x  Ø 2.18<br>3.8<br>3.8<br>TE2105-Q2<br>Joe<br>~~&~~<br>et<br>Pea<br>a<br>Tt|26.2 MAX.<br>3.0<br>1.5<br>25.2 MAX.<br>26.2 MAX.<br>3.8<br>TIN PLATED<br>TE2104-H1<br>2.7<br>86<br>87<br>30<br>85<br>17.9<br>8.4<br>2x  Ø 1.93<br>17.0<br>3.8<br>8.5<br>3.8<br>6x  Ø 2.18<br>3.8<br>3.8<br>TE2105-Q2<br>Joe<br>~~&~~<br>et<br>Pea<br>a<br>Tt|
|---|---|---|---|
|**Product code structure**|**Product code structure**|**Product code structure**|**Product code structure**<br>Typical product code|
|**Type**|**Type**<br>**V23134**Power Relay F|||
||||**Contact arrangement**|



## **Production in Europe** (only) 

|V23134-J0052-D642<br>V23134-J0052-X429<br>V23134-J0052-X439<br>V23134-J0052-X455<br>V23134-J0052-X511<br>V23134-J0052-X4613)<br>V23134-J0053-D642<br>V23134-J0056-X4082)3)<br>V23134-J0065-X4974)<br>V23134-J1052-D642<br>V23134-J1052-X281<br>V23134-J1053-D642|**Arrangement**<br>1 form A, 1 NO|Standard|**Coil suppr.**|NO|12VDC|Silver based|Plug-in, QC|7-1393303-3<br>1-1414147-0<br>1-1414286-0<br>1-1414610-0<br>3-1415001-2<br>1-1414469-0<br>9-1393303-7<br>0-1393304-5<br>3-1414937-3<br>0-1393304-9<br>1-1393304-0<br>1-1393304-1|
|---|---|---|---|---|---|---|---|---|
||||Resistor 680Ω|NOR|||||
||||Diode (cathode 86)|Diode (cathode 86)<br>NOD|||||
||||Resistor 470Ω|NOR|||PCB||
|||||NO|||||
||||Resistor 560Ω|NOR|||Plug-in, QC||
|||||NO|24VDC||||
||||Resistor 1200Ω|NOR|||||
|||||NO|||PCB||
|||Bracket|||12VDC||Plug-in, QC||
||||Resistor 560Ω|NOR|||||
|||||NO|24VDC||||



- 1) See terminal assignment diagrams. 3) Special feature: 14.5mm load terminals. 

2) Special feature: contact gap >0.8mm. 

4) Packed in tray with 300 pcs. per unit. 

- Other types on request. 

This list represents the most common types and does not show all variants covered by this datasheet. 

## **Production in Asia** (only) 

|V23134-J0052-D642<br>V23134-J0052-X429<br>V23134-J0052-X439<br>V23134-J0052-X4613)<br>V23134-J0053-D642<br>V23134-J0056-X4082)3)|**Arrangement**<br>1 form A, 1 NO|Standard|**Coil suppr.**|NO<br>12VDC<br>NOR<br>NOD<br>NOR|12VDC|Silver based|Plug-in, QC|7-1904094-7<br>7-1904094-8<br>7-1904094-9<br>8-1904094-0<br>8-1904094-3<br>8-1904094-4|
|---|---|---|---|---|---|---|---|---|
||||Resistor 680Ω||||||
||||Diode (cathode 86)||||||
||||Resistor 560Ω||||||
|||||NO<br>24VDC<br>NOR|24VDC||||
||||Resistor 1200Ω||||||



- 1) See terminal assignment diagrams. 

- 2) Special feature: contact gap >0.8mm. Other types on request. 

This list represents the most common types and does not show all variants covered by this datasheet. 

3 

Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Catalog, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

03-2015, Rev. 0315 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company.