XPC240400S-02

WLAN, 5 GHz, Ethernet/SPI/UART/USB, On-Module Antenna, Edge Connector, xPico 240 Series

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: LANTRONIX
Product type:
SVHC: To Be Advised
Frequency RF: 5GHz
Product Range: xPico 240 Series
Module Interface: Ethernet, SPI, UART, USB
Module Applications: Industrial Automation, Medical Devices, Resource Management, Responsive Retail
Delivery and price
Units per pack	1
Price	35.74 €
Current stock	10+
Lead time	30 days
Datasheet
## LANTRONIX: 

xPico6 **xPico 200 Series** 200 Seriese **Embedded Wi-Fi[®] Gateway Data Sheet** 

Part Number 900-818 Revision H October 2019 

## **Table of Contents** 

|**xPico 200 Series  Embedded Wi-Fi® Gateway   Data Sheet**<br>**1**|
|---|
|Table of Contents __________________________________________________________ 2|
|List of Figures _____________________________________________________________ 4|
|List of Tables ______________________________________________________________ 5|
|**1:** **Functional Description**<br>**7**|
|Overview _________________________________________________________________ 7|
|Applications _______________________________________________________________ 7|
|Product Features ___________________________________________________________ 8|
|**2:** **Hardware and Software Description**<br>**9**|
|xPico 200 Block Diagram ___________________________________________________ 11|
|Software Features _________________________________________________________ 11|
|**3:** **Pin and Pad Definitions**<br>**16**|
|**4:** **Interfaces**<br>**22**|
|Ethernet _________________________________________________________________ 22|
|UART ___________________________________________________________________ 22|
|USB Host Interface ________________________________________________________ 23|
|SPI Slave Interface ________________________________________________________ 24|
|SPI Master Interface _______________________________________________________ 24|
|Configurable General Purpose I/O Pins (GPIO) __________________________________ 24|
|System Pins ______________________________________________________________ 25|
|Strap Pins _______________________________________________________________ 26|
|**5:** **IEEE 802.11 Wireless Lan Specifications**<br>**27**|
|**6:** **Bluetooth Specifications**<br>**31**|
|**7:** **Antenna Connection Options**<br>**32**|
|**8:** **Electrical Characteristics**<br>**33**|
|Recommended Operating Conditions __________________________________________ 33|
|DC Characteristics – Digital I/O Signals ________________________________________ 33|
|Dynamic Power Management Modes __________________________________________ 34|
|Output Power _____________________________________________________________ 36|
|Input Power ______________________________________________________________ 37|
|EVM ____________________________________________________________________ 37|
|RX Sensitivity_____________________________________________________________ 38|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_2_ 

|Power, Reset, Wake, Shutdown and Default Timing ______________________________ 38|
|---|
|SPI Slave Timing __________________________________________________________ 40|
|SPI Master Timing _________________________________________________________ 41|
|Memory _________________________________________________________________ 42|
|**9:** **Package Description and Mechanical Footprint**<br>**43**|
|Dimensions ______________________________________________________________ 43|
|Material and Weight ________________________________________________________ 45|
|**10:**<br>**Product Information Label**<br>**46**|
|**11:**<br>**Compliance**<br>**47**|
|Labeling of the End Product _________________________________________________ 48|
|Federal Communication Commission Interference Statement (xPico 240/250/270) ______ 49|
|Industry Canada Statement (xPico 240/250/270): ________________________________ 50|
|RoHS, REACH, and WEEE Compliance Statement _______________________________ 56|
|**12:**<br>**Ordering Information**<br>**57**|
|Warranty ________________________________________________________________ 58|
|Contact Information ________________________________________________________ 58|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_3_ 

## **List of Figures** 

Figure 2-1  xPico 240 Module Options _____________________________________________ 10 Figure 2-2  xPico 250 and xPico 270 Module Options _________________________________ 10 Figure 2-3  xPico 200 Block Diagram _____________________________________________ 11 Figure 2-4  Wi-Fi Integration Mode _______________________________________________ 12 Figure 2-5 Wireless Microcontroller Mode __________________________________________ 12 Figure 3-1 xPico 200 Edge Connector Pin & Signal Location ___________________________ 16 Figure 3-2 xPico 200 PCB Interface Pin & Signal Location _____________________________ 18 Figure 8-1  Reset Timing _______________________________________________________ 38 Figure 8-2  Reset to Defaults Timing ______________________________________________ 39 Figure 8-3  Wake Timing _______________________________________________________ 39 Figure 8-4  SPI Slave Timing ____________________________________________________ 40 Figure 8-5  SPI Master Timing ___________________________________________________ 41 Figure 9-1  xPico 200 Embedded Wi-Fi Gateway (On-Module Antenna) __________________ 43 Figure 9-2  xPico 200 Embedded Wi-Fi Gateway (Dual U.FL) __________________________ 43 Figure 9-3  Layout Footprint for xPico 200  Enterprise Wi-Fi IoT Module __________________ 44 Figure 9-4  xPico 200 Edge Connector Footprint Dimensions___________________________ 45 Figure 10-1  xPico 200 Module Label _____________________________________________ 46 Figure 11-1  EU Declaration of Conformity (xPico 240/250) ____________________________ 53 Figure 11-2  EU Declaration of Conformity (xPico 270) ________________________________ 54 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_4_ 

## **List of Tables** 

Table 3-1: xPico 200 Edge Connector Signal Descriptions _________________________ 17 Table 3-2: xPico 200 PCB Interface Signal Descriptions ___________________________ 19 Table 4-1: xPico 200 UART Signal Definitions ___________________________________ 22 Table 4-2: xPico 200 USB Host Interface Signal Definitions _________________________ 23 Table 4-3: xPico 200 SPI Slave Interface Signal Definitions _________________________ 24 Table 4-4: xPico 200 SPI Master Interface Signal Definitions ________________________ 24 Table 4-5: xPico 200 Module GPIO Signal Definitions _____________________________ 25 Table 4-6:  xPico 200 Strap Pins ______________________________________________ 26 Table 5-1: xPico 200 Module Radio Specification _________________________________ 27 Table 5-2: 20 MHz Channels _________________________________________________ 27 Table 5-3: 40 MHz Channels _________________________________________________ 29 Table 5-4: 80 MHz Channels (xPico 270 only) ___________________________________ 29 Table 5-5: Wireless Throughput, 802.11ac, TCP _________________________________ 29 Table 5-6: Wireless Throughput, 802.11ac, UDP _________________________________ 29 Table 5-7: Wireless Throughput, 802.11n, TCP __________________________________ 30 Table 5-8: Wireless Throughput, 802.11n, UDP __________________________________ 30 Table 6-1: xPico 200 BT Radio Specification (xPico 250/270 only) ___________________ 31 Table 7-1: External Antenna Options __________________________________________ 32 Table 7-2: On-Module Antenna Option _________________________________________ 32 Table 8-1: Recommended Operating Conditions for xPico 200 Module ________________ 33 Table 8-2: DC Characteristics & Digital I/0 Signals ________________________________ 33 Table 8-3: xPico 200 Power Consumption 2.4 Ghz (@3.3V, 25[o] C), Bluetooth Disabled ___ 34 Table 8-4: xPico 200 Power Consumption 5 Ghz (@3.3V, 25[o] C), Bluetooth Disabled ____ 35 Table 8-5: xPico 250/270 Power Consumption with Bluetooth Enabled (@3.3V, 25[o] C) ___ 36 Table 8-6: xPico 200 Module RF Output Power (Wi-Fi Conducted) ___________________ 36 Table 8-7: xPico 200 Module RF Output Power (BT Conducted) _____________________ 36 Table 8-8: xPico 200 Module RF Input Power Wi-Fi 2.4Ghz ________________________ 37 Table 8-9: xPico 200 Module RF Input Power Wi-Fi 5Ghz __________________________ 37 Table 8-10: xPico 200 Module RF Input Power BT ________________________________ 37 Table 8-11: xPico 200 Module Wi-Fi EVM ______________________________________ 37 Table 8-12: xPico 200 Module Rx Sensitivity @ 3.3V input power, +25[o] C ______________ 38 Table 8-13: Shutdown Pin Timing _____________________________________________ 39 Table 8-14: SPI Slave Timing ________________________________________________ 40 Table 8-15: SPI Master Timing _______________________________________________ 41 Table 9-1: Material and Weight _______________________________________________ 45 Table 10-1: Datamatrix ECC200 Barcode Standard Descriptions ____________________ 46 Table 11-1: Country Certifications (xPico 240/250/270) ____________________________ 47 Table 11-2: Country Transmitter IDs (xPico 240) _________________________________ 48 Table 11-3: Country Transmitter IDs (xPico 250) _________________________________ 48 Table 11-4: Country Transmitter IDs (xPico 270) _________________________________ 48 Table 11-5: Europe – EU Declaration of Conformity (xPico 240/250/270) ______________ 55 Table 12-1: xPico 240 Order Information _______________________________________ 57 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_5_ 

Table 12-2: xPico 250 Order Information _______________________________________ 57 Table 12-3: xPico 270 Order Information _______________________________________ 57 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_6_ 

## _**1: Functional Description**_ 

## **Overview** 

The Lantronix[®] xPico[®] 200 series of embedded IoT gateways is one of the smallest and most highly integrated industrial Wi-Fi[®] , Ethernet and Bluetooth[®] combo solutions, allowing you to deliver and manage secure connected products without added complexity and risk. 

The xPico 200 series delivers always-on dual-band enterprise Wi-Fi, dual-mode Bluetooth (Bluetooth Classic v2.1+EDR and Bluetooth Low Energy v4.2) as well as Ethernet connectivity for business-critical assets. 

It is a standalone module that does not require an external host processor for the wireless and network stack. With customer proven **TruPort** technology that includes production-ready essential IoT connectivity firmware, cloud-based management and an integrated device security framework, xPico 200 series delivers a complete network and IoT connectivity offload solution for any microcontroller. 

Device manufacturers can use xPico 200 series as the wireless microcontroller within their device and focus on the application firmware components while leveraging the integrated secure connectivity network and cloud service enablement capabilities within the module. 

The high performance xPico 200 series is available in different versions (see _Product Features_ ). 

With the xPico 200 family, design engineers and system architects can reduce product development time and deploy their secure connected devices with confidence that their products will connect and work as expected. 

## **Applications** 

For applications that need Ethernet and wireless connectivity options, xPico 200 delivers a compact combo solution without needing to integrate two different network stacks from different modules or controllers. 

Integrated Bluetooth capability on xPico 250/270 enables gateway functions that need to aggregate Bluetooth sensor devices or communicate with Bluetooth peripherals and mobile devices. 

Key applications include: 

- Medical devices 

- Industrial machines 

- Retail/POS 

- Weighing scales 

- Asset and warehouse management 

- Environmental monitoring 

- Transportation and Telematics 

The xPico 200 series is designed for applications in a variety of industries where reliability, extended operating temperature range, and robust wireless connectivity are business-critical. 

The xPico 200 series is also particularly well-suited for products with long lifecycles in highly 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_7_ 

regulated industries where the constant change in Wi-Fi technologies and certification would typically make it difficult or cost prohibitive to incorporate a wireless solution. 

## **Product Features** 

- Dual-band (802.11 a/b/g/n) for high performance industrial Wi-Fi 

- xPico 270 adds 802.11ac 

- 2.4 GHz and 5 GHz bands supported 

- IEEE 802.3 10/100 Mbps Ethernet (RMII) 

- Compliant with Bluetooth Core Specification version 4.2 including BLE - xPico 250/270 

- Support for Bluetooth Generic Access Profile (GAP), Generic Attribute Profile (GATT), Device ID Profile - xPico 250/270 

- On-module antenna or Dual U.FL 

- UART (x1), SPI Master (x1), SPI Slave (x1), USB Host/Device and GPIO 

- Ethernet MAC (RMII), USB, UART – host interfaces 

- Simultaneous AP and client (STA), AP only, client (STA) only modes 

- Support for up to 5 simultaneous client connections to Soft AP interface 

- TruPort[®] Serial and TruPort Socket providing industry’s most compatible device data access technology 

- InfiniShield Security – adding integrated root of trust security and data-at-rest and datain-motion encryption, authentication and identification 

- Direct mobile to device service interface via SoftAP technology (xPico 240/250/270) or Bluetooth (xPico 250/270) 

- WPA/WPA2 – Personal and Enterprise Wi-Fi Security 

- SSL/TLS 1.2 with X.509 Certificate Management 

- Dual Network Support 

- Embedded Ethernet to Wi-Fi STA or Ethernet to Wi-Fi Soft AP bridge 

- Integrated Cloud Based Device Management via MACH10[®] platform 

- Web Service API, XML Configuration, Serial Command API 

- Modular RF Certification (FCC, IC, ETSI, Japan, AU/NZS, China) 

- Compact SMT (LGA) Footprint (17mm x 25 mm) or Edge Connector Card Footprint (22 mm x 35.5 mm) 

- Operating temperature range: -40 ⁰ C to +85 ⁰ C 

- 5-year limited warranty 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_8_ 

## _**2: Hardware and Software Description**_ 

The xPico 200 series is a highly integrated module that includes a Cortex R4 controller, 802.11 a/b/g/n MAC/BB, 10/100 Mbps Ethernet MAC, Bluetooth 4.2 (on xPico 250/270), RAM, flash, and two U.FL antenna connectors or a single on-module antenna (on the xPico 240 only). xPico 270 adds 802.11ac. 

The module also includes the following data communication interfaces: 

- One 10/100Mbps Ethernet MAC with RMII interface for connection to an external PHY 

- One USB 2.0 high speed Host/Device port 

- One 300 to 4Mbps UART with hardware flow control 

- One SPI Slave port operating up to 50 MHz clock rate (5 Mbps application throughput) 

- Up to 10 GPIO lines 

The xPico 200 series operates on 3.3V power with 3.3V logic, and has a built-in voltage supervisory circuit. 

xPico 200 series offers two main variants depending on the connectivity interfaces available: 

- **xPico 240** - Provides dual-band 802.11abgn Wi-Fi and Ethernet combo 

- **xPico 250** - Provides dual-band 802.11abgn Wi-Fi, Ethernet and dual-mode Bluetooth (Bluetooth Classic and Bluetooth Low Energy) 

- **xPico 270** - Provides dual-band 802.11ac/abgn Wi-Fi, Ethernet and dual-mode Bluetooth (Bluetooth Classic and Bluetooth Low Energy) 

The xPico 200 comes in two form factors: 

- Small form factor SMT module 

- Edge connector module with standard connector 

xPico 240 has two antenna options: 

- Two U.FL for connection to external antennas for single stream diversity.  See _Chapter 7: Antenna Connection Options_ for recommended antennas. 

- Single on-module antenna 

xPico 250 and xPico 270 have one antenna option: 

- Two U.FL for connection to external antennas.  One antenna dedicated for Wi-Fi and one dedicated for BT.  See _Chapter 7: Antenna Connection Options_ for recommended antennas. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_9_ 

## **Figure 2-1  xPico 240 Module Options** 

XPC2401 – LGA, Dual U.FL 

XPC2402 – LGA, On-Module Antenna 

XP2403 – Edge Connector, Dual U.FL 

**==> picture [109 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
XPC2404 – Edge Connector,<br>On-Module Antenna<br>**----- End of picture text -----**<br>


**Figure 2-2  xPico 250 and xPico 270 Module Options** 

XPC2501, XPC2701 – LGA, Dual U.FL 

XPC2503, XPC2703 – Edge Connector, Dual U.FL 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_10_ 

## **xPico 200 Block Diagram** 

**Figure 2-3  xPico 200 Block Diagram** 

**==> picture [128 x 272] intentionally omitted <==**

**----- Start of picture text -----**<br>
4 Wire UART<br>~ xPico 270)<br>Kho [ ePio]<br>2.4 GHz TX/RX<br>J<br>KS SPI<br>yK—}|<br>20/100 Rea<br>5 GHz TX/RX<br>=><br>|x| RESET<br>FY<br>==) DEFAULT [wake] UARTREControl<br>| ——— <2<br>CYW20707<br>BT 4.2<br>|<br>|<br>H |<br>|<br>\i<br>|<br>\|<br>|<br>|<br>Not installed for<br>|_______xPico240<br>**----- End of picture text -----**<br>


## **Software Features** 

The xPico 200 embedded gateway software stack provides essential IoT connectivity infrastructure for building secure connected products. Device manufacturers can offload this complexity from their application microcontroller when interfacing with the module in **Network Co-processor Mode** or use the module standalone in **Wireless Microcontroller Mode** (Hostless). 

## **Network Co-Processor Mode** 

The module completely offloads all Wi-Fi and secure network connectivity requirements for attached microcontrollers thereby reducing device firmware complexity while accelerating OEM’s time to introduce and support secure connected products in the market. The host interfaces available for connecting to the microcontroller are UART, USB, SPI Slave, and Ethernet. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_11_ 

**Figure 2-4  Wi-Fi Integration Mode** 

## **Wireless Microcontroller Mode** 

In addition, the xPico 200 series also can be used as a wireless microcontroller in standalone mode. With the provided SDK, device manufacturers can leverage not only network and wireless stacks, but also the complete application framework that includes the configuration management system, reliable remote OTA firmware upgrades and automated connection management features described below. 

**Figure 2-5 Wireless Microcontroller Mode** 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_12_ 

## **TruPort Serial** 

TruPort Serial, a robust serial to Wi-Fi and serial to Ethernet application that supports the transparent transport of hundreds of serial protocols over the network. TruPort Serial is very suitable for use in network co-processor mode based applications requiring very little to no programming and development effort. 

Key capabilities included are: 

- Support RS232 serial and USB (CDC Serial and CDC ACM device classes) 

- Advanced connectivity modes and configuration knobs to tune the connection parameters for a specific protocol without requiring custom software programming 

- Automatic and Manual connect modes 

- Inbound (Accept Mode) and Outbound (Connect Mode) connections 

- Modem Emulation Mode enables connecting to different servers using a standard AT command set 

- AES (128-bit, 192-bit, 256-bit) Encrypted session and TLS session modes for secure tunneling 

## **TruPort Socket** 

Connect your device microcontroller to multiple services and communicate directly with mobile devices and cloud services at the same time via TruPort Socket. The simple API for TruPort Socket is available via the UART, SPI Slave, or USB interface operating in CDC ACM mode. 

Seamlessly switch between Data Mode and Module Management Mode (CLI access) for total control and data channel access from your device host microcontroller. 

Access TCP, UDP, TLS, HTTP, SMTP channels and communicate with external services through these channels without implementing these protocol stacks within your microcontroller. 

## **Ethernet to Wi-Fi Bridge** 

For devices with microcontrollers that include a network stack and also have Ethernet connectivity available, the gateway module software provides wireless connectivity to these devices via the Ethernet to Wi-Fi Bridge mode. Ethernet connected host devices can be accessed remotely via the Wi-Fi Client interface or via the Wi-Fi Soft AP interface. In this mode, the Wi-Fi stack is fully offloaded and managed via the configuration interface. This mode is most suitable for networked microcontrollers that do not have the resources to integrate wireless device drivers and add-on the complexity of managing the wireless stack. 

## **Concurrent Soft AP and Client Mode** 

In addition to supporting the standard Soft AP only mode, Client only mode, xPico 200 series also supports concurrent Soft AP and Client mode. 

In this mode, clients can create a direct connection to the Soft AP interface of the gateway, while the Client interface is connected to the Enterprise Wi-Fi network. 

This enables OEM service and support teams to setup a direct connection to their machines to diagnose, troubleshoot and service them via mobile devices without requiring access to the customer's Wi-Fi network. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_13_ 

## **Enterprise Wi-Fi Security (802.11i, 802.1X/EAP)** 

Centralized control of security policies and ability to permit and revoke access rights and scaling to support the large number of devices deployed within the enterprise are primary considerations that Enterprise Wi-Fi Security addresses. With support for 802.1X, 802.11i and EAP authentication methods along with support PKI support and X.509 certificate management, connectivity to the enterprise network is handled via configuration and without any integration, testing and certification of supplicant and authenticator software. 

## **InfiniShield Security** 

Device manufacturers are exposed to new security risks that emerge with having connected products. They also have to navigate the engineering complexity of providing integrated security within their connected devices. Lantronix InfiniShield Security provides an integrated device security framework that lets device manufacturers build this into their connected products from the start of their design cycle instead of as an after-thought or bolted on component. 

InfiniShield Security enables building secure connected products quickly and easily with a full range of features including: 

- Secure Boot – run only signed software on device 

- Secure Firmware Over the Air (FOTA) – accept signed firmware and reliable over the air updates 

- Secure Connectivity – enterprise Wi-Fi security, data-in-motion authentication and encryption 

- Encrypted Storage – stored configuration and device data securely 

- Fine Grained Port Access Control – prevent back-doors with fine grained control over network ports 

- Root of Trust and Device Identity – certificate management, secure key storage, OEM keys 

## **Wi-Fi Connection Profiles** 

Connect to multiple wireless networks autonomously by configuring the network parameters once and then letting the module automatically select the best network to connect to or set policies for connecting to specific networks.  Wi-Fi connection profiles eliminate the need to manage the state of connection management from the device microcontroller or writing this via the SDK in wireless microcontroller mode. 

## **Configuration and Management Interface** 

Access the module configuration and management engine via the microcontroller or via the network. Command Line Interface (CLI) mode offers a text based interactive interface versus writing an elaborate driver interface for the AT command and control interface on the device microcontroller. XML provides a programmatic interface to the module configuration and status that is accessible via the available host interfaces or over the network interface. Web API offer the ability to program the module configuration via the Over-The-Air (OTA) or Network interface. For more details on the usage of these management interfaces, refer to the _xPico 240/250 Embedded Wi-Fi Gateway User Guide_ available at https://www.lantronix.com/products/xpico-200/ for more details. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_14_ 

## **Reliable Firmware Over-The-Air (FOTA) Updates** 

As device requirements evolve and new product features are provided, device manufacturers can leverage the reliable OTA firmware upgrade capabilities to prevent “system bricks.” OTA firmware upgrade always ensures there is at-least one known version of firmware available in the event an upgrade operation does not succeed. It operates over the connected network and does not require placing the module into specific operational modes into order to trigger the update. Updates can be performed remotely and securely using the included Secure Boot features. 

## **Power Management** 

xPico 200 series gateways support IEEE 802.11 power save modes for radio power management. The gateways also includes application aware power management framework that enables battery powered operation. 

## **Pre-integration with MACH10 Platform** 

Quickly deliver secure and robust web-scale device management and monitoring for your connected products with MACH10 Global Device Manager. 

Pre-integrated support within xPico 200 series gateways enables your connected products and the gateway to be managed across the product lifecycle from deployment to decommissioning. 

## **Remote Gateway Management with Lantronix Gateway Central** 

Leverage powerful monitoring and management capabilities for Lantronix gateways using Lantronix Gateway Central. Use Google-like search to quickly locate gateways, trigger centralized remote firmware updates and setup customized alerts and notifications on monitoring parameters across your fleet of Lantronix gateways. 

With Lantronix Gateway Central, you can maintain a consistent factory configuration or default field configuration or stay on an approved firmware baseline without paying for custom programming services. 

## **Integrated Bluetooth Classic and Bluetooth Low Energy Stacks (xPico 250/270)** 

Implement custom BLE profiles with the available SDK and leverage the underlying Bluetooth Stack that complies with Bluetooth Core Specification version 4.2 including BR/EDR/BLE, supports Generic Access Profile (GAP) and Generic Attribute Profile (GATT). It provides support for BLE Central role to enable communication with various BLE sensors and peripherals. As a BLE peripheral it enables communication with mobile devices. 

Utilize the pre-integrated Lantronix Gateway Provisioning Profile along with the Gateway Provisioning mobile application to bootstrap initial gateway wireless and network configuration from mobile devices. 

Leverage the integrated connection management to pair, bond, and connect with Bluetooth Classic (BR/EDR) devise. Supports the following BT Classic Profiles: 

- Serial Port Profile (SPP) – Client and Server* mode 

- A2DP* (Data mode only) 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_15_ 

## _**3: Pin and Pad Definitions**_ 

_Table 3-2_ describes the xPico 200 Wi-Fi interface signal definition. The **Signal Name** column identifies the signal pin being described while the **Primary Function** column provides definitions of the signal pin depending upon the member of the xPico 200 family being used. Differentiating the signal pins is beneficial when using multiple xPico 200 device types on a single platform. 

**Figure 3-1 xPico 200 Edge Connector Pin & Signal Location** 

**==> picture [129 x 63] intentionally omitted <==**

**----- Start of picture text -----**<br>
ANT2<br>WI-FI DIVERSITY<br>(or BLUETOOTH)<br>ANT1<br>2X U.FL WI-FI  f e<br>**----- End of picture text -----**<br>


_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_16_ 

_**Table 3-1: xPico 200 Edge Connector Signal Descriptions**_ 

|**Pin**|**Signal**|**Pin**|**Signal**|
|---|---|---|---|
|1|GND|2|3.3V|
|3|USB_D+|4|3.3V|
|5|USB_D-|6|SYS_LED|
|7|GND|8|NC|
|9|SDIO_SCK/SPI_CLK (slave)|10|NC|
|11|SDIO_CMD/SPI_MOSI (slave)|12|USB_H/D_SEL|
|13|SDIO_DATA0/SPI_MISO (slave)|14|SDIO_MODE/SPI_SLAVE_MODE|
|15|SDIO_DATA1/SPI_IRQ (slave)|16|CP9/LED|
|17|SDIO_DATA2|18|GND|
|19|SDIO_DATA3/SPI_CS (slave)|20|WAKE|
|21|NC|22|UART_TXD|
|23|DEFAULT#|32|UART_RXD|
|33|GND|34|UART_RTS|
|35|TDO|36|UART_CTS|
|37|TDI|38|TRST|
|39|GND|40|CP8/CS (master)|
|41|TCK|42|CP7/SCK (master)|
|43|TMS|44|CP4/MOSI (master)|
|45|GND|46|CP3/MISO (master)|
|47|RMII_MDC|48|CP2/INT (master)|
|49|RMII_MDIO|50|CP1|
|51|GND|52|RESET#|
|53|RMII_RXD1|54|I2C2_CLK|
|55|RMII_RXD0|56|I2C2_DATA|
|57|GND|58|CP5/I2C_DATA|
|59|NC|60|CP6/I2C_CLK|
|61|RMII_CLK|62|CP10/PWM|
|63|GND|64|NC|
|65|RMII_RXDV|66|RSVD_CP12|
|67|RMII_TXEN|68|RSVD_CP11|
|69|GND|70|RMII_RST|
|71|RMII_TXD1|72|3.3V|
|73|RMII_TXD0|74|3.3V|
|75|GND|||



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_17_ 

## **Figure 3-2 xPico 200 PCB Interface Pin & Signal Location** 

**==> picture [67 x 106] intentionally omitted <==**

**----- Start of picture text -----**<br>
SDCK/SPI_CLK<br>SDCMD/SP|_MOSI<br>SDIO1/SPI_sD I O2RQ<br>SDIO3/SPI_CS<br>**----- End of picture text -----**<br>


_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_18_ 

_**Table 3-2: xPico 200 PCB Interface Signal Descriptions**_ 

||||||
|---|---|---|---|---|
|**Signal Name**|**Primary Function**|**xPico 200**<br>**SMT Pin**|**Edge**<br>**Connector**<br>**Pin**|**Driver**<br>**Strength**|
|GND|Signal Ground|1|1||
|SDCK/SPI_CLK(slave)|SDIO Clock/SPI Slave<br>Clock|2|9|8 mA|
|SDCMD/SPI_MOSI(slave)|SDIO CMD/SPI Master<br>Out-Slave In|3|11|8 mA|
|SDIO0/SPI_MISO(slave)|SDIO Data 0/SPI Master<br>In-Slave Out|4|13|8 mA|
|SDIO1/SPI_IRQ(slave)|SDIO Data 1/SPI Slave<br>Interrupt|5|15|8 mA|
|SDIO2|SDIO Data 2|6|17|8 mA|
|SDIO3/SPI_CS(slave)|SDIO Data 3/SPI Slave<br>chipselect|7|19|8 mA|
|CP3/MISO(master)|Configurable I/O- SPI<br>MISO|8|46|8 mA|
|CP4/MOSI(master)|Configurable I/O-SPI<br>MOSI|9|44|8 mA|
|CP7/SCK(master)|Configurable I/O-SPI<br>Clock|10|42|8 mA|
|CP8/CS(master)|Configurable I/O-SPI Chip<br>Select|11|40|8 mA|
|CP2/INT(master)|Configurable I/O-SPI<br>interrupt input|12|48|8 mA|
|I2C Data 2|I2C Bus 2 data|13|56|8 mA|
|I2C Clock 2|I2C Bus 2 clock|14|54|8 mA|
|CP5/I2CDATA*|Configurable I/O-<br>I2CDATA|15|58|8 mA|
|CP6/I2CCLK*|Configurable I/O-I2CCLK|16|60|8 mA|
|WAKE|Toggle signal from low to<br>high to WAKE from<br>SLEEP or Power down<br>state.  This pin must be<br>pulled high with a 100K<br>ohm resistor.<br>**_Note:_**signal is noise<br>sensitive.  Filter as close<br>aspossible to modulepin.|17|20||
|GND|Signal Ground|18|7||
|USB+|USB Port Positivepin|19|3||
|USB-|USB Port Negativepin|20|5||
|GND|Signal Ground|21|33||
|CP9/PWM/LED|Configurable I/O-PWM|22|16|8 mA|
|RMII_TXD0|RMII TXD0 transmit<br>output|23|73||



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_19_ 

||||||
|---|---|---|---|---|
|**Signal Name**|**Primary Function**|**xPico 200**<br>**SMT Pin**|**Edge**<br>**Connector**<br>**Pin**|**Driver**<br>**Strength**|
|RMII_TXD1|RMII TXD1 transmit<br>output|24|71||
|RMII_CLK|RMII interface clock|25|61||
|USB_H/DEV_SEL|USB Host/Device Mode<br>Select<br>Pull high for device mode<br>on USB<br>Pull low for host mode on<br>USB<br>Connect to ID pin of USB<br>connector|26|12||
|RMII_TXEN|RMII transmit enable<br>output|27|67||
|RMII_RST|RMII reset output|28|70||
|SDIO_MODE/SPI_SLAVE_MODE|SDIO Master/Slave select<br>Pull high for master mode<br>on SDIO.<br>Pull low for slave mode on<br>SDIO/SPI.|29|14||
|RMII_RXDV|RMII RX data valid input|30|65||
|RMII_RXD0|RMII RXD0 receive input|31|55||
|RMII_RXD1|RMII RXD1 receive input|32|53||
|SYS_LED|System status LED, active<br>high|33|6||
|GND|Signal Ground|34|39||
|MDC|MDIO clock|35|47||
|MDIO|MDIO data|36|49||
|CP10/PWM|Configurable I/O-PWM|37|62|8 mA|
|CP1|Configurable I/O|38|50|8 mA|
|RESERVED1|Reserved for future UART<br>RX output|39|66||
|RESERVED2|Reserved for future UART<br>TX output|40|68||
|EXT_RESET#|Unit hardware reset,<br>active low.  Drive low for<br>50ms to reboot unit.<br>Signal should be driven<br>high or pulled high after<br>assertion.  EXT_RESET#<br>is inactive during module<br>power down (standby)<br>state.  Assert WAKE<br>signal to come out of low<br>power states prior to<br>assertingreset.|41|52||
|CTS1|Serial clear-to-send input|42|36|8 mA|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_20_ 

||||||
|---|---|---|---|---|
|**Signal Name**|**Primary Function**|**xPico 200**<br>**SMT Pin**|**Edge**<br>**Connector**<br>**Pin**|**Driver**<br>**Strength**|
|VCC|Power input.  Must be<br>connected to 3.3V power<br>supply|43|74||
|VCC|Power input.  Must be<br>connected to 3.3V power<br>supply|44|72||
|VCC|Power input.  Must be<br>connected to 3,3V power<br>supply|45|2,4||
|RTS1|Serial ready-to-send (232)<br>/ serial transmit enable<br>(485)output|46|34|8 mA|
|RXD1|Serial receive data input|47|32|8 mA|
|TXD1|Serial transmit data output|48|22||
|TMS|JTAG TMS Input|49|43||
|TCK|JTAG Clock Input|50|41||
|TDI|JTAG Data Input|51|37||
|TDO|JTAG Data Output|52|35||
|TRST|JTAG Reset Input|53|38||
|GND|Signal Ground|54|45||
|DEFAULT|Drive low for 6 seconds or<br>longer to reset unit to<br>default settings.|57|23||
|GND|Signal Ground|58|51||
|GND|Signal Ground|59|57||
|GND|Signal Ground|60|63||
|GND|Signal Ground|61|69||
|GND|Signal Ground|64|75||
|GND|Signal Ground|65|18||
|GND|Signal Ground|66|||
|GND_PADS|Signal Ground|67,68,69,<br>70,71,72,<br>73,74,75|||



Note1: The current module supports an external 10/100 Mbps Ethernet PHY via the RMII interface. Note2:  The logic IO pins are 3.3V tolerant. 

Note3:  SMT Pins 67 to 75 are the ground pads under the module.  These pads must be connected to ground.  These pads also provide thermal relief for the module.  It is recommended that multiple vias for each pad be used to connect the ground pads to the ground plane.  Please see the evaluation board layout as a reference for the ground pad and multiple via in pad recommendation.  Contact your local FAE or sales support for the evaluation kit artwork. 

Note 4:  All unused IO pins may be left floating, except for the required straps on pins 17, 26, and 29. Note 5: Asterisk (*) indicates feature available in a future release.  Contact your local sales representative for availability. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_21_ 

## _**4: Interfaces**_ 

The xPico 200 module offers a number of interfaces to allow for easy connectivity to the module. These include 10/100 Mbps Ethernet MAC with RMII, UART for asynchronous serial communication, SPI Master and SPI Slave for synchronous formatted data, and USB interface. 

## **Ethernet** 

The xPico 200 module has an integrated 10/100 Mbps Ethernet MAC and with an RMII interface.  External PHY, magnetics and RJ45 are required for connection to a standard Ethernet network.  See the _xPico 200 Series Embedded Wi-Fi Gateway Integration Guide_ available at https://www.lantronix.com/products/xpico-200/ for more details. 

## **UART** 

- The xPico 200 module supports one UART interface 

- The UART supports asynchronous data rate up to 4 Mbps, with Odd/Even parity,  and 1 & 2 stop bits 

- Software flow control (Xon, Xoff) 

- Operational mode as a DTE device 

- UART supports TX, RX, RTS, CTS (hardware flow control) 

_**Table 4-1: xPico 200 UART Signal Definitions**_ 

|**Pin**<br>**Name**|**Description**|||
|---|---|---|---|
|||**SMT Pin**|**Edge Conn. Pin**|
|TXD1|Serial transmit data output|48|22|
|RTS1|Serial ready-to-send/serialtransmit enable output|46|34|
|RXD1|Serial receive data input|47|32|
|CTS1|Serialclear-to-sendinput|42|36|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_22_ 

## **USB Host Interface** 

_**Table 4-2: xPico 200 USB Host Interface Signal Definitions**_ 

|||||||
|---|---|---|---|---|---|
|**Pin Name**|**Description**|**SMT Pin**|**Edge**<br>**Conn. Pin**|**Signal**<br>**Requirement**|**Type A**<br>**USB**<br>**Host**<br>**Conn.**<br>**Pin**|
|USB+/HHSDPB|USB HS Host Port A<br>Positive pin|19|3|Route as 90<br>ohm<br>differential<br>pair|3|
|USB-/HHSDPM|USB HS Host Port A<br>Negative pin|20|5|Route as 90<br>ohm<br>differential<br>pair|2|
|5V (User-<br>supplied)|5V power for USB connector|||Current limit<br>to 500 mA per<br>port|1|
|Ground|Signal Ground|Ground|Ground|Ground plane|4|
|USB_H/D_SEL|USB Host/Device Mode<br>Select|26|12|Pull low for<br>host mode.<br>Connect to ID<br>pin of USB<br>connector if<br>using A/B or<br>Type C<br>connector||
|USB Host<br>Power Enable<br>(CP2)|Output to enable external<br>USB power switch for host<br>port connector (Use<br>configurable CP2)|12|48|Pull high for<br>Host Mode||
|USB Host Port<br>Over Current<br>Flag (CP1)|Input from external USB<br>power switch indicating the<br>host port is over current<br>(Use configurable CP1)|38|50|Pull high for<br>Host Mode||



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_23_ 

## **SPI Slave Interface** 

The xPico 200 gateway has one external SPI slave interface for connection an external SPI master using the gSPI implementation. The signal levels on the SPI slave interface are 3.3V tolerant. This interface is shared with the SDIO interface pins. SDIO is not available in the current product release. 

**Note:** The SPI master interface uses different pins than the SPI slave interface. 

_**Table 4-3: xPico 200 SPI Slave Interface Signal Definitions**_ 

|||||
|---|---|---|---|
|**Pin Name**|**Description**|**SMT Pin**|**Edge Conn.**<br>**Pin**|
|SPI_CLK|SPI Slave Clock|2|9|
|SPI_MOSI|SPI Master Out-Slave In|3|11|
|SPI_MISO|SPI Master In-Slave Out|4|13|
|SPI_IRQ|SPI Slave Interrupt|5|15|
|SPI_CS|SPISlave Chip Select|7|19|
|SDIO_MODE/SPI_SLAVE_MODE|Master/Save<br>•<br>Pull high for master mode<br>(not currently supported)<br>•<br>Pull low for slave mode|29|14|



## **SPI Master Interface** 

The xPico 200 gateway has one external SPI master interface for connection an external SPI slave. The signal levels on the SPI interface are 3.3V tolerant. This interface is shared with the configurable GPIO pins. 

**Note:** The SPI slave interface uses different pins than the SPI master interface. 

_**Table 4-4: xPico 200 SPI Master Interface Signal Definitions**_ 

|**Pin Name**|**Description**|||
|---|---|---|---|
|||**SMT Pin**|**Edge Conn.**<br>**Pin**|
|CP7/SPI_CLK|SPI Clock|10|42|
|CP4/SPI_MOSI|SPI Master Out-Slave In|9|44|
|CP3/SPI_MISO|SPI Master In-Slave Out|8|46|
|CP2/SPI_IRQ|SPI Interrupt|12|48|
|CP8/SPI_CS|SPI Chip Select|11|40|



## **Configurable General Purpose I/O Pins (GPIO)** 

The xPico 200 module provides up to 10 configurable General Purpose Input/Output (GPIO) pins. Certain GPIOs are multiplexed with other interface functions (e.g. SPI). Mapping of these functions to CPs will be driven via configuration and applied at system initialization. 

Each CP can be configured as a general purpose input, general purpose output, micro- 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_24_ 

controller peripheral block or a soft function.  These pins are 3.3V CMOS logic level tolerant. 

_**Table 4-5: xPico 200 Module GPIO Signal Definitions**_ 

|**Pin**<br>**Name**||**Reset State**|||
|---|---|---|---|---|
||**Description**||**xPico 200**<br>**SMT Pin**|**Edge**<br>**Connector**<br>**Pin**|
|CP1|Configurable I/O-USB Over Current Flag|Input|38|50|
|CP2/INT|Configurable I/O-SPI interrupt input-USB<br>HostPortPower Enable Output|Input|12|48|
|CP3|Configurable I/O-SPI MISO1|Input|8|46|
|CP4|Configurable I/O-SPI MOSI1|Input|9|44|
|CP5|Configurable I/O-I2C bus data1|Input|15|58|
|CP6|Configurable I/O-I2C bus clock1|Input|16|60|
|CP7|ConfigurableI/O-SPIClock1|Input|10|42|
|CP8|Configurable I/O-SPI Chip Select1|Input|11|40|
|CP9|Configurable I/O-PWM|Input|22|16|
|CP10|Configurable I/O-PWM|Input|37|62|
|CP11|Configurable I/O|Input|40|68|
|CP12|ConfigurableI/O|Input|39|66|



1 SPI/I2C Interfaces (SPI Master) are reserved for a future update. Contact your local sales representative for availability. 

## **System Pins** 

The xPico 200 module has three system pins: 

- **EXT_RESET#** is the unit hardware reset, active low.  Drive low for 50 ms to reboot unit. Signal should be driven high or pulled high after reset.  EXT_RESET# is inactive during module power down (standby) state.  Assert WAKE signal to come out of low power states prior to asserting reset. 

- **DEFAULT#** is the unit reset to default, active low. Drive low for 6 seconds or longer to reset unit to default settings. May be left floating if unused. 

- **WAKE** is the toggle signal to WAKE from the STANDBY state.  WAKE signal is noise sensitive.  Filter as close as possible to the module pin. 

See the _xPico 200 Series Embedded Wi-Fi Gateway Integration Guide_ available at https://www.lantronix.com/products/xpico-200/ for more details. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_25_ 

## **Strap Pins** 

The xPico 200 module has two strap pins for setting the mode of the USB and SDIO ports. The SDIO port is reserved for a future update. These pins must be strapped high or low.  The mode definitions are listed below. 

_**Table 4-6:  xPico 200 Strap Pins**_ 

|**Pin Name**|**Description**|**xPico**<br>**200 SMT**<br>**Pin**||
|---|---|---|---|
||||**Edge**<br>**Connector**<br>**Pin**|
|USB_H/D_SEL|Pull high for device mode on USB port.<br>Pull low for host mode on USB port.|26|12|
|SDIO_MODE/SPI_SLAVE_MODE|Pull high for master mode on SDIO port.<br>Pull low forslavemode onSDIO port.|29|14|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_26_ 

## _**5: IEEE 802.11 Wireless Lan Specifications**_ 

The table below provides the specifications and performance attributes for the xPico 200 module IEEE 802.11 radio. 

_**Table 5-1: xPico 200 Module Radio Specification**_ 

|**Feature**|**Description**|
|---|---|
|Frequency Band|2.412 – 2.484 GHz (20Mhz channels)<br>5.18 to 5.845 GHz (20 and 40Mhz channels)<br>5.18 to 5.845 GHz (20, 40, and 80Mhz channels) (xPico 270 only)<br>Channels dependent onassigned country code.See channel list below.|
|Supported Data Rates<br>xPico 240/250|802.11abgn<br>a, b, g data rates up to 54 Mbps<br>n data rates up to MCS7|
|Supported Data Rates<br>xPico 270 only|802.11ac/abgn<br>a, b, g data rates up to 54 Mbps<br>n data rates up to MCS7<br>ac datarates up toMCS9|
|Modulation|OFDM with BPSK, QPSK, 16-QAM, 64-QAM (xPico 270 up to 256QAM)<br>IEEE 801.11b with CCK and DSSS|
|802.11 MACFeatures|WEP,WPA,WPA2,WMM,WMM-PS (UAPSD),WMM-SA,AES,TKIP|
|802.11 Modes|a/b/g/n/d/h/I (xPico 270 includes ac)|



_**Table 5-2: 20 MHz Channels**_ 

||**Frequency**|**Channel**|**FCC/USA**|**Canada**|**Europe**|**Australia**|**New**<br>**Zealand**|**Japan**|**China**|
|---|---|---|---|---|---|---|---|---|---|
|2.4 GHz Band|2412|**1**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2417|**2**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2422|**3**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2427|**4**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2432|**5**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2437|**6**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2442|**7**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2447|**8**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2452|**9**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2457|**10**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2462|**11**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||2467|**12**|-|-|Yes|Yes|Yes|Yes|Yes|
||2472|**13**|-|-|Yes|Yes|Yes|Yes|Yes|
||2484|**14**|-|-|-|-|-|-|-|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_27_ 

||**Frequency**|**Channel**|**FCC/USA**|**Canada**|**Europe**|**Australia**|**New**<br>**Zealand**|**Japan**|**China**|
|---|---|---|---|---|---|---|---|---|---|
|||||||||||
|5 GHz Band|5180|**36**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5200|**40**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5220|**44**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5240|**48**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5260|**52**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5280|**56**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5300|**60**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5320|**64**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5500|**100**|Yes|Yes|Yes|Yes|Yes|Yes|-|
||5520|**104**|Yes|Yes|Yes|Yes|Yes|Yes|-|
||5540|**108**|Yes|Yes|Yes|Yes|Yes|Yes|-|
||5560|**112**|Yes|Yes|Yes|Yes|Yes|Yes|-|
||5580|**116**|Yes|Yes|Yes|Yes|Yes|Yes|-|
||5600|**120**|Yes|Yes|Yes|-|Yes|Yes|-|
||5620|**124**|Yes|Yes|Yes|-|Yes|Yes|-|
||5640|**128**|Yes|Yes|Yes|-|Yes|Yes|-|
||5660|**132**|Yes|Yes|Yes|Yes|Yes|Yes|-|
||5680|**136**|Yes|Yes|Yes|Yes|Yes|Yes|-|
||5700|**140**|Yes|Yes|Yes|Yes|Yes|Yes|-|
|||||||||||
||5745|**149**|Yes|Yes|-|Yes|Yes|-|Yes|
||5765|**153**|Yes|Yes|-|Yes|Yes|-|Yes|
||5785|**157**|Yes|Yes|-|Yes|Yes|-|Yes|
||5805|**161**|Yes|Yes|-|Yes|Yes|-|Yes|
||5825|**165**|Yes|Yes|-|Yes|Yes|-|Yes|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_28_ 

_**Table 5-3: 40 MHz Channels**_ 

||**Frequency**|**Channel**|**FCC/USA**|**Canada**|**Europe**|**Australia**|**New**<br>**Zealand**|**Japan**|**China**|
|---|---|---|---|---|---|---|---|---|---|
|5 GHz Band|5190|**38**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5230|**46**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5270|**54**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5310|**62**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5510|**102**|Yes|Yes|Yes|Yes|Yes|Yes|-|
||5550|**110**|Yes|Yes|Yes|Yes|Yes|Yes|-|
||5590|**118**|Yes|Yes|Yes|-|Yes|Yes|-|
||5630|**126**|Yes|Yes|Yes|-|Yes|Yes|-|
||5670|**134**|Yes|Yes|Yes|-|Yes|Yes|-|
||5755|**151**|Yes|Yes|-|Yes|Yes|-|Yes|
||5795|**159**|Yes|Yes|-|Yes|Yes|-|Yes|
|||**_Table 5-4: 80 MHz Channels (xPico 270 only)_**||||||||
||**Frequency**|**Channel**|**FCC/USA**|**Canada**|**Europe**|**Australia**|**New**<br>**Zealand**|**Japan**|**China**|
|5 GHz Band|5210|**42**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5290|**58**|Yes|Yes|Yes|Yes|Yes|Yes|Yes|
||5530|**106**|Yes|Yes|Yes|Yes|Yes|Yes|-|
||5610|**122**|Yes|Yes|Yes|-|Yes|Yes|-|
||5690|**138**|Yes|Yes|Yes|-|Yes|Yes|-|
||5775|**155**|Yes|Yes|-|Yes|Yes|-|Yes|



_**Table 5-5: Wireless Throughput, 802.11ac, TCP**_ 

||**TCP 20 MHz**|**TCP 20 MHz**|**TCP 40 MHz**|**TCP 40 MHz**|**TCP 80 MHz**|**TCP 80 MHz**|
|---|---|---|---|---|---|---|
||**Downlink**|**Uplink**|**Downlink**|**Uplink**|**Downlink**|**Uplink**|
|Mbps|47.1|54|71.3|88.1|87.6|115|



_**Table 5-6: Wireless Throughput, 802.11ac, UDP**_ 

||**UDP 20 MHz**|**UDP 20 MHz**|**UDP 40 MHz**|**UDP 40 MHz**|**UDP 80 MHz**|**UDP 80 MHz**|
|---|---|---|---|---|---|---|
||**Downlink**|**Uplink**|**Downlink**|**Uplink**|**Downlink**|**Uplink**|
|Mbps|69.2|65.7|134|125|218|201|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_29_ 

## _**Table 5-7: Wireless Throughput, 802.11n, TCP**_ 

**==> picture [443 x 49] intentionally omitted <==**

**----- Start of picture text -----**<br>
TCP 20 MHz  TCP 40 MHz<br>Downlink  Uplink  Downlink  Uplink<br>Mbps  45  49.3  67.4  77.5<br>**----- End of picture text -----**<br>


## _**Table 5-8: Wireless Throughput, 802.11n, UDP**_ 

||**UDP 20 MHz**|**UDP 20 MHz**|**UDP 40 MHz**|**UDP 40 MHz**|
|---|---|---|---|---|
||**Downlink**|**Uplink**|**Downlink**|**Uplink**|
|Mbps|59.2|58.8|109|105|



## _**Notes:**_ 

_1. Frequencies from 5150 Mhz to 5250 Mhz for indoor use only._ 

_2. The unit supports 20 MHz bandwidth channels for 2.4 Ghz channels._ 

_3. The unit supports 20, 40 MHz bandwidth channels for 5 Ghz channels._ 

_4. xPico 270 supports 80Mhz bandwidth channels for 5Ghz channels._ 

_5. Country code modifications are not available to the end user._ 

_6. If the unit is connected as a client to an external AP, the soft AP channel follows the external AP. Otherwise, the Soft AP defaults to automatically choosing a channel based on RSSI and channel usage. A unit that is not connected to an external AP may also be configured for a specific channel._ 

_7. In Soft AP mode, the product will not initiate any connection or active scan in 5G DFS bands and will only follow external AP or master device to use a channel._ 

_8. Wireless throughput tests performed with iPerf in 5 GHz band, channel 36. UDP throughputs measured at approximately 0.1% packet loss. 802.11n throughput tests performed as single stream. 802.11ac and 80 MHz wireless throughput values apply only to xPico 270._ 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_30_ 

## _**6: Bluetooth Specifications**_ 

The table below provides the specifications and performance attributes for the xPico 250/270 Bluetooth radio. 

_**Table 6-1: xPico 200 BT Radio Specification (xPico 250/270 only)**_ 

|**Feature**|**Description**|
|---|---|
|Frequency Band|2.402 – 2.480 GHz|
|Supported Standards|Bluetooth core specification 4.2 including BR/EDR/BLE|
|Modulation|GFSK, π/4-DQPSK, 8-DPSK|
|Power|Class 1, Class 2|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_31_ 

## _**7: Antenna Connection Options**_ 

The xPico 200 module supports wireless connectivity via two U.FL connectors for single stream transmit and receive diversity. 

An on-module stamped metal antenna version is also available as a product SKU option. The single antenna is used for transmit and receive. Diversity is not available on the module with the on-module antenna. 

The xPico 200 modules are certified using the antennas listed in _Table 7-1_ and _Table 7-2_ below. 

Refer to the compliance section below for certification requirements related to antenna selection. 

_**Table 7-1: External Antenna Options**_ 

|**Antenna Type**|**Peak Gain**<br>**Typical**|**Lantronix**<br>**Part**<br>**Number**|**Vendor**|**Vendor Part**<br>**Number**|**Approved**<br>**Region**|
|---|---|---|---|---|---|
|PCB strip antenna<br>with 50 mm cable to<br>U.FL connector<br>With tape backing|2.5 dBi, 2.39 Ghz<br>to 2.49 Ghz<br>5dBi, 4.9Ghz to<br>5.9Ghz|XPW100A<br>003-01-B<br>50 piece<br>bulk pack|Ethertronics|1001077|FCC, IC,<br>EU,<br>AUS/NZS,<br>JPN, China,<br>Mexico|
|PCB strip antenna<br>with 50 mm cable to<br>U.FL connector<br>Without tape<br>backing|2.5 dBi, 2.39 Ghz<br>to 2.49 Ghz<br>5dBi, 4.9Ghz to<br>5.9Ghz||Ethertronics|1000668|FCC, IC,<br>EU,<br>AUS/NZS,<br>JPN, China,<br>Mexico|
|Swivel type<br>antenna, with RP-<br>SMA(M) connector|2 dBi, 2.4 Ghz to<br>2.5 Ghz, 2 dBi,<br>5.15 Ghz to 5.85<br>Ghz|930-033-R-<br>ACC<br>50 piece<br>bulk pack|Wanshih|WSS002|FCC, IC,<br>EU,<br>AUS/NZS,<br>JPN, China,<br>Mexico|
|Swivel type<br>antenna, with RP-<br>SMA(M) connector|3.8 dBi, 2.4Ghz to<br>2.5Ghz,<br>5.5 dBi, 4.9 Ghz<br>to 5.8Ghz||Taoglas|GW.71.5153<br>(Not for EU<br>use)|FCC, IC,<br>AUS/NZS,<br>JPN, China,<br>Mexico|



_**Note:** Antenna gain listed above excludes cable loss._ 

_**Table 7-2: On-Module Antenna Option**_ 

|**Antenna Type**|**Peak Gain Typical**|
|---|---|
|On module stamped metal antenna|0 dBi 2.4 Ghz, 4 dBi 5 Ghz|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_32_ 

## _**8: Electrical Characteristics**_ 

## **Recommended Operating Conditions** 

_Table 8-1_ specifies the recommended operation conditions and parameters for optimum performance of the xPico 200 module. 

_**Table 8-1: Recommended Operating Conditions for xPico 200 Module**_ 

|**Parameter**|**Symbol**|**Min**|**Typ**|**Max**|**Units**|
|---|---|---|---|---|---|
|Voltage|VCC|3.15|3.3|3.45|V DC|
|SupplyVoltageRipple/droop|VCC pp|||±1%||
|Extended OperatingTemperature|Ta|-40||+85|⁰C|
|Extended StorageTemperature|Ta|-40||+85|⁰C|
|Humidity (non-condensing, relative)||5%||85|%|
|PowerSupplyramprate|VCC|40||10001|Us|
|Vibration (Operational)||||40|G|
|Non-operationalShock||||65|G|



1For slower power supply ramp rates it is recommended to assert reset for 50ms after power reaches 3.15V. 

## **DC Characteristics – Digital I/O Signals** 

_**Table 8-2: DC Characteristics & Digital I/0 Signals**_ 

|**Symbol**|**Parameter/Signal**|**Min**|**Typ**|**Max**|**Unit**|
|---|---|---|---|---|---|
|VIL|RESET#|-0.5||0.8|V|
|VIH|RESET#|2.0||VCC + 0.5|V|
|VIL|CPx, UART, JTAG|-0.5||0.8|V|
|VIH|CPx, UART, JTAG|2.0||VCC + 0.5|V|
|VOL|CPx, UART, JTAG|||0.4|V|
|VOH|CPx, UART, JTAG|VCC-0.4|||V|
|VIL|SDIO pins|||0.25*VCC|V|
|VIH|SDIO pins|0.625*VCC|||V|
|VOL|SDIO pins|||0.125*VCC|V|
|VOH|SDIO pins|0.75*VCC|||V|
|RPU|||39.58||kΩ|
|RPD|SDIO_MODE/SPI_<br>SLAVE_MODE||44.57||kΩ|
|RPU|||44.57||kΩ|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_33_ 

## **Dynamic Power Management Modes** 

The table below describes the power management modes for the xPico 200 module, along with their typical and maximum current consumption values. 

The xPico 200 module supports power-up and standby modes within its dynamic applicationaware power management framework. 

_**Table 8-3: xPico 200 Power Consumption 2.4 Ghz (@3.3V, 25[o] C), Bluetooth Disabled**_ 

|||||||||
|---|---|---|---|---|---|---|---|
|**Parameter**|**Power**<br>**Mgmt**|**Soft AP**|<br>**Typical**<br>**xPico**<br>**240**|**Typical**<br>**xPico**<br>**250/270**|<br>**Max**<br>**xPico**<br>**240**|**Max**<br>**xPico**<br>**250/270**|<br>**Units**|
|Boot sequence peak|N/A|N/A|580|600|||mA|
|Idle current average-unit<br>connected to AP on client<br>11n Ch6|OFF|ON|95|123|||mA|
|Idle current average-unit<br>connected to AP on client<br>11n Ch6|ON,<br>Beacon<br>100 ms,<br>DTIM5|ON|95|123|||mA|
|Idle current average unit<br>connected to AP on client<br>11n Ch6|ON,<br>Beacon<br>100 ms,<br>DTIM 5|OFF|41|66|||mA|
|Iperf(UDP) in bridge mode to<br>AP on client interface<br>1 Mbps-Sustained<br>11n Ch6|ON,<br>Beacon<br>100 ms,<br>DTIM 5|OFF|95|128|||mA|
|Transmitter surge,<br>11g 54 Mbps,15dBm|N/A|N/A|345|379|399|427|mA|
|Transmitter surge, 11n, 20<br>Mhz BW, MCS7, 17 dBm|N/A|N/A|345|380|398|430|mA|
|Transmitter surge,<br>11g 54 Mbps, 0dBm|N/A|N/A|298|328|358|383|mA|
|Transmitter surge, 11n,<br>20 Mhz BW, MCS7, 0dBm|N/A|N/A|299|330|356|386|mA|
|Stand by, external IO<br>connections removed @+25C|N/A|N/A|30|38|||uA|
|Stand by with external PHY,<br>other external IO connections<br>removed @ +25C|N/A|N/A|97|97|||uA|
|Ethernet ping, Wi-Fi disabled.<br>External PHY current not<br>included|N/A|N/A|37|37|||mA|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_34_ 

_**Table 8-4: xPico 200 Power Consumption 5 Ghz (@3.3V, 25[o] C), Bluetooth Disabled**_ 

|||||||||
|---|---|---|---|---|---|---|---|
|**Parameter**|**Power Mgmt**|<br>**Soft AP**|**Typical**<br>**xPico**<br>**240**|**Typical**<br>**xPico**<br>**250/270**|**Max**<br>**xPico**<br>**240**|**Max**<br>**xPico**<br>**250/270**|**Units**|
|Boot sequence peak|N/A|N/A|580|600|||mA|
|Idle current average-unit<br>connected to AP on<br>client 11n Ch48|OFF|ON|148|174|||mA|
|Idle current average-unit<br>connected to AP on<br>client 11n Ch48|ON,<br>Beacon<br>100ms,<br>DTIM 5|ON|148|172|||mA|
|Idle current average unit<br>connected to AP on<br>client 11n Ch48|ON,<br>Beacon<br>100ms,<br>DTIM 5|OFF|40|66|||mA|
|Iperf(UDP) in bridge<br>mode to AP on client<br>interface 1Mbps-<br>Sustained, 11n Ch48|ON,<br>Beacon<br>100ms,<br>DTIM 5|OFF|134|166|||mA|
|Transmitter surge, 11a<br>54Mbps, 14dBm|N/A|N/A|390|429|465|499|mA|
|Transmitter surge, 11n,<br>40Mhz BW, MCS7,<br>14dBm|N/A|N/A|401|440|494|532|mA|
|Transmitter surge, 11a<br>54Mbps, 0dBm|N/A|N/A|316|350|395|457|mA|
|Transmitter surge, 11n,<br>40Mhz BW, MCS7,<br>0dBm|N/A|N/A|334|360|419|494|mA|
|Stand by, external IO<br>connections removed<br>@+25C|N/A|N/A|30|38|||uA|
|Stand by with external<br>PHY, other external IO<br>connections removed @<br>+25C|N/A|N/A|97|97|||uA|
|Ethernet ping, Wi-Fi<br>disabled.<br>External PHY current not<br>included|N/A|N/A|37|37|||mA|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_35_ 

_**Table 8-5: xPico 250/270 Power Consumption with Bluetooth Enabled (@3.3V, 25[o] C)**_ 

|||||||
|---|---|---|---|---|---|
|**Parameter**|**Power**<br>**Mgmt**|**Soft AP/**<br>**Wi-Fi**<br>**Client**|**Average**<br>**Current**|**Peak**<br>**Current**<br>**Typical**|**Units**|
|BLE peripheral not connected.  Wi-Fi client<br>and soft AP disabled|OFF|Disable|44|120|mA|
|BLE peripheral not connected.  Wi-Fi Client<br>connected (2.4Ghz) ping.  Soft AP enabled.|OFF|Enabled|110|556|mA|
|BLE peripheral not connected.  Wi-Fi Client<br>connected (5Ghz) ping.SoftAPenabled.|OFF|Enabled|124|600|mA|
|BLE peripheral connected.  Wi-Fi client and<br>soft AP disabled|OFF|Disabled|45|121|mA|
|BLE peripheral connected.  Wi-Fi Client<br>connected (2.4Ghz) ping.  Soft AP enabled.|OFF|Enabled|112|556|mA|
|BLE peripheral connected.  Wi-Fi Client<br>connected (5Ghz) ping.SoftAPenabled.|OFF|Enabled|126|600|mA|



## **Output Power** 

The xPico 200 module RF output power is listed in the _Table 8-6_ below. 

_**Table 8-6: xPico 200 Module RF Output Power (Wi-Fi Conducted)**_ 

|**Mode**|**Rate**|**TYP.**|**Tolerance**|**Unit**|
|---|---|---|---|---|
|RF Average Output Power, 802.11b|1 Mbps|17|+ 2|dBm|
||11 Mbps|17|+ 2|dBm|
|RF Average Output Power, 802.11g|6Mbps|15|+2|dBm|
||54 Mbps|15|+ 2|dBm|
|RF Average Output Power, 802.11n  (2.4Ghz)|MCS0|15|+ 2|dBm|
||MCS7|15|+ 2|dBm|
|RF Average Output Power, 802.11a|6 Mbps|15|+ 2|dBm|
||54 Mbps|15|+2|dBm|
|RF Average Output Power, 802.11n  (5Ghz)|MCS0|13|+ 2|dBm|
||MCS7|13|+ 2|dBm|
|RF Average Output Power, 802.11ac (5Ghz)<br>(xPico 270 only)|MCS9|12|+2|dBm|



_**Table 8-7: xPico 200 Module RF Output Power (BT Conducted)**_ 

|**Mode**|**Rate**|**Min.**|**TYP.**|**Max**|**Unit**|
|---|---|---|---|---|---|
|RF Average Output Power|BLE||61||dBm|
|Power Class 12|BR/EDR|0||20|dBm|
|PowerClass22|BR/EDR|-6|3|4|dBm|
|Power Class 32|BR/EDR|||0|dBm|



Note 1: Max EIRP for BLE 10dBm per BT specification Note 2: Refer to BT Sig power transmitter power specifications 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_36_ 

## **Input Power** 

The xPico 200 module RF input power is listed in the _Table 8-8_ below. 

_**Table 8-8: xPico 200 Module RF Input Power Wi-Fi 2.4Ghz**_ 

|**Maximum RF Receive Level**|**Maximum**|**Unit**|
|---|---|---|
|AbsoluteMaximum Wi-FiSignal|+5|dBm|
|@ 1, 2 Mbps (8% PER, 1024 octets)|-3.5|dBm|
|@ 5.5, 11 Mbps (8% PER, 1024 octets)|-9.5|dBm|
|@ 6, 9, 12 Mbps (10% PER, 1024 octets)|-9.5|dBm|
|@ MCS0–2 rates (10% PER, 4095 octets)|-9.5|dBm|
|@18,24, 36,48, 54 Mbps (10%PER,1024octets)|-14.5|dBm|
|@ MCS3–7 rates (10% PER, 4095 octets)|-14.5|dBm|



_**Table 8-9: xPico 200 Module RF Input Power Wi-Fi 5Ghz**_ 

|**Maximum RF Receive Level**|**Maximum**|**Unit**|
|---|---|---|
|Absolute Maximum Wi-Fi Signal|+5|dBm|
|@ 6, 9, 12 Mbps (10% PER, 1024 octets)|-9.5|dBm|
|@MCS0–2 rates (10%PER,4095 octets)|-9.5|dBm|
|@ 18, 24, 36, 48, 54 Mbps (10% PER, 1024 octets)|-14.5|dBm|
|@MCS3–9rates (10%PER,4095 octets)|-14.5|dBm|



_**Table 8-10: xPico 200 Module RF Input Power BT**_ 

|**Maximum RF Receive Level**|**Maximum**|**Unit**|
|---|---|---|
|Maximum RF Input Level CW signal|-5|dBm|
|Maximum RF Input (High PeaktoAverage, ex Wi-Fi)|-10|dBm|



## **EVM** 

The xPico 200 module TX EVM follow the IEEE specification listed in _Table 8-11_ below. 

_**Table 8-11: xPico 200 Module Wi-Fi EVM**_ 

|**Mode**|**Rate**|**Max**|**Unit**|
|---|---|---|---|
|RF Average Output EVM (11g)|6Mbps|-5|dB|
||54 Mbps|-25|dB|
|RF Average Output EVM (11n 2.4Ghz)|MCS0|-5|dB|
||MCS7|-27|dB|
|RF Average Output EVM (11a)|6 Mbps|-5|dB|
||54 Mbps|-25|dB|
|RF Average Output EVM (11n 5Ghz)|MCS0|-5|dB|
||MCS7|-27|dB|
|RF Average Output EVM (11ac 5Ghz)<br>(xPico 270 only)|MCS9|-32|dB|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_37_ 

## **RX Sensitivity** 

The xPico 200 module Rx sensitivity is listed in _Table 8-12_ below. 

_**Table 8-12: xPico 200 Module Rx Sensitivity @ 3.3V input power, +25[o] C**_ 

|**Receiver Characteristics**|**Typical**|
|---|---|
|PER <10%, Rx Sensitivity @ 802.11g 6 Mbps|-92.6 dBm|
|PER <10%, Rx Sensitivity @ 802.11g 54 Mbps|-75.5 dBm|
|PER <10%, Rx Sensitivity @ 802.11a 6 Mbps|-88.7 dBm|
|PER <10%, Rx Sensitivity @ 802.11a 54 Mbps|-73.7 dBm|
|PER <10%, Rx Sensitivity @ 802.11n 5Ghz MCS7 HT20|-72.0 dBm|
|PER <10%, Rx Sensitivity @ 802.11n 5Ghz MCS7 HT40|-68.8 dBm|
|BER <0.1%, Rx Sensitivity @ Bluetooth BR, 1Mbps GFSK|-89.2 dBm|
|BER <0.01%, Rx Sensitivity @ Bluetooth EDR, 3Mbps D8PSK|-85.6 dBm|



## **Power, Reset, Wake, Shutdown and Default Timing** 

The diagrams below show the timing requirement for VCC, RESET#, DEFAULT#, WAKE and SHDN. 

**Figure 8-1  Reset Timing** 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_38_ 

**Figure 8-2  Reset to Defaults Timing** 

**Figure 8-3  Wake Timing** 

_**Table 8-13: Shutdown Pin Timing**_ 

|**Parameter**|**Description**|**Minimum**|**Maximum**|**Unit**|
|---|---|---|---|---|
|Tpu|Time for VCC to reach 90% of its maximum<br>value|40|1000|us|
|Tpor|Time from VCC to reach 90% of its maximum<br>value and de-assertion of external reset.|50||ms|
|Treboot|Recommended reset pulse for system reboot|50||ms|
|Tpup2dflt|Time from VCC power up to DEFAULT#<br>assertion.  Note DEFAULT# can be left floating<br>if unused.|0||ns|
|Tdefault|Assertion time for DEFAULT# to unit reset to<br>default and reboot.|6||S|
|Twake|Wake pulse width.  Note wakeup is triggered on<br>therising edge.|100||us|
|Teio_off|Time recommended to shut off external IO to<br>prevent leakage into module|0||ms|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_39_ 

## **SPI Slave Timing** 

The diagram below shows the timing requirement for SPI_CLK, SPI_DIN, and SPI_DOUT. Data is sampled on the rising edge of the clock. 

## **Figure 8-4  SPI Slave Timing** 

_**Table 8-14: SPI Slave Timing**_ 

|**Parameter**|**Description**|**Minimum**|**Maximum**|**Unit**|
|---|---|---|---|---|
|T1|Clock period. Fmax =50 MHz.|2.08|-|ns|
|T2/T3|Clock high/low.|(0.45 x T1)–T4|(0.55 x T1)–T4|ns|
|T4/T5|Clock rise/fall time.|-|2.5|ns|
|T6|Input setup time, SIMO valid to SPI_CLK<br>active edge.|5.0|-|ns|
|T7|Input hold time, SPI_CLK active edge to<br>SIMOinvalid.|5.0|-|ns|
|T8|Output setup time, SOMI valid before<br>SPI_CLK rising.|5.0|-|ns|
|T9|Output hold time, SPI_CLK active edge to<br>SOMI invalid.|5.0|-|ns|
|CSX to clock|CSX fall to 1strising edge. SPI_CSx<br>remains active for the entire duration of SPI<br>Slave read/write/write_read transaction.|7.86|-|ns|
|Clock to CSX|Last falling edge to CSX high.|-|-|ns|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_40_ 

## **SPI Master Timing** 

The diagram below shows the timing requirement for CS, CK, SDI, and SDO. 

**Figure 8-5  SPI Master Timing** 

_**Table 8-15: SPI Master Timing**_ 

|**Parameter**|**Description**|**Minimum**|**Maximum**|**Unit**|
|---|---|---|---|---|
||OperatingVoltage||VDDIO|V|
||Frequency of operation|1|26.7|MHz|
|T1|SCKoutput cycle time|1/26.7MHz||ns|
|T2|SCK output high/low time|18||ns|
|T3|CS Active to SCK delay|880||ns|
|T4|SCKto CSinactive delay|756||ns|
|T5|SCK to MOSI valid|-|13|ns|
|T6|SCKtoMOSI invalid|35.6||ns|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_41_ 

## **Memory** 

The xPico 200 module comes with the following memory profile: 

## **Flash Memory** 

The xPico 200 module has 8 MB serial NOR flash that is shared between the boot, OS, and user space. 

## **SRAM** 

The xPico 200 module has 2 MB SRAM. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_42_ 

## _**9: Package Description and Mechanical Footprint**_ 

The xPico 200 module comes in two different mechanical packages.  The first is an SMT module with an LGA footprint.  The LGA footprint version is for SMT applications.  The second mechanical package is the xPico 200 module mounted on an edge card.  The mechanical dimensions for both options are shown below.  Both mechanical packages also come with options for two U.FL connectors for connection to external antennas or a single on-module antenna. Note, Bluetooth is not available for the options with on-module antenna. 

## **Dimensions** 

The size and thickness of the xPico 200 module is 25 mm (L) x 17 mm (W) x 2.53 mm (H) +/0.3 mm (including shielding). The PCB footprint is shown in the figure on the next page. 

**Figure 9-1  xPico 200 Embedded Wi-Fi Gateway (On-Module Antenna)** 

**Figure 9-2  xPico 200 Embedded Wi-Fi Gateway (Dual U.FL)** 

_**Note:** Wi-Fi Diversity not available on units with Bluetooth._ 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_43_ 

**Figure 9-3  Layout Footprint for xPico 200 Enterprise Wi-Fi IoT Module** 

_**Note:** It is recommended to follow the evaluation platform layout.  Find this within the Platform PCB Package, which can be downloaded at https://www.lantronix.com/products/xpico-200/._ 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_44_ 

**Figure 9-4  xPico 200 Edge Connector Footprint Dimensions** 

_**Note:** The Edge Connector Module mates to TE Connectivity part number 2199230-4._ 

## **Material and Weight** 

_**Table 9-1: Material and Weight**_ 

|**Category**|**Description**|
|---|---|
|Weight|1.654g (with on module antenna option), 1.552g (with two U.FL option)|
|Material|Metalshell|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_45_ 

## _**10: Product Information Label**_ 

The product information label contains important information about your specific module, including the part number, revision, manufacturing date code, product model, country of origin, datamatrix barcode, and MAC address. 

**Figure 10-1  xPico 200 Module Label** 

The xPico 200 module uses the Datamatrix ECC200 bar code standard. The field definitions are as follows: 

_**Table 10-1: Datamatrix ECC200 Barcode Standard Descriptions**_ 

|**Field**|**Description**|**Example**|
|---|---|---|
|V1|Barcoderevision|4|
|C1|Count of tags|3|
|P1|Part number of the module|950-00101|
|R1|Revision of the module|A11|
|D1|Manufacturing date code of the<br>module|14W20|
|L1|Manufacturing location/factory|CHINA 01|
|S1|Serial number|0080A3980404|
|S2|MACH10ID|AAAABBBBCCCCDDDDEEEEFFFFGGGGHHHH|
|E1|End of barcode||



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_46_ 

## _**11: Compliance**_ 

(According to ISO/IEC Guide and EN 45014) 

## **Manufacturer's Name & Address:** 

Lantronix, Inc., 7535 Irvine Center Drive, Suite 100, Irvine, CA 92618 USA Declares that the following product: 

**Product Name Model:** xPico 200 

_Conforms to the following standards or other normative documents:_ 

_**Table 11-1: Country Certifications (xPico 240/250/270)**_ 

|**Country**<br>~~ee~~|**Specification**<br>~~ee ee~~|**xPico**<br>**240**<br>~~ee~~|**xPico**<br>**250**<br>~~ee~~|**xPico**<br>**270**<br>~~ee~~|
|---|---|---|---|---|
|USA<br>~~ee~~|FCC Part 15,Subpart B, Class B<br>FCC Part 15, Subpart C 15.247 (WLAN)<br>FCC Part 15, Subpart C 15.247 (BT)<br>FCC Part 15, Supbart E 15.407 (DFS)<br>~~ee ee~~|Yes<br>~~ee~~|Yes<br>~~ee~~|Yes<br>~~ee~~|
|Canada|ICES-003:2012 Issue 5, Class B<br>RSS-Gen, Issue 4, 2014-11<br>RSS-102, Issue 5, 2015-03<br>RSS-247, Issue 2, 2017-02|Yes|Yes|Yes|
|EU|See_EU Declaration of Conformity_below.|Yes|Yes|Yes|
|Australia, New<br>Zealand<br>N11206<br>Cc|Australia, New<br>AS/NZS 4268 2017<br>AS/NZS 2772.2|Yes|Yes|Yes|
|Japan|ARIB STD-T66(v3.7), MIC notice 88 Appendix 43<br>ARIB STD-T71(v6.1), MIC notice 88 Appendix 45|Yes|Yes|**|
|China|SRRC|Yes|Yes|**|
|India|WPC ETA|**|Yes|Yes|
|Taiwan|LP002|**|Yes|Yes|
|Mexico|NOM, IFETEL|**|Yes|Yes|
|Safety|EN 62368-1|Yes|Yes|Yes|



**For additional regional certification requests please contact your local Lantronix sales team member. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_47_ 

## **Labeling of the End Product** 

The label on the end product incorporating the xPico 200 gateway must clearly state that it contains an FCC-approved RF module. Canada and Japan also require a similar statement. 

For example, “This product contains RF transmitter ID # (put FCC, IC, CMIIT, and/or Japan module grant numbers here).” The label must include the ID numbers for the regions where the end product is installed. The grant numbers are below. 

_**Table 11-2: Country Transmitter IDs (xPico 240)**_ 

|**Country**|**Specification**|
|---|---|
|||
|USA FCC ID|R68XPICO200|
|Canada IC ID|3867A-XPICO200|
|Japan ID|020-170133|
|China SRRC|2017AJ6663(M) (xPico 240)|
|India ID|**Contact Lantronix Sales|
|Taiwan ID|**Contact Lantronix Sales|
|Mexico ID|**Contact Lantronix Sales|



_**Table 11-3: Country Transmitter IDs (xPico 250)**_ 

|**Country**|**Specification**|
|---|---|
|||
|USA FCC ID|R68XPICO200|
|Canada IC ID|3867A-XPICO200|
|Japan ID|020-170133|
|China SRRC|2017AJ6665(M) (xPico 250)|
|India ID|ETA-SD-20190501074|
|Taiwan ID|CCAJ19LP6150T9|
|Mexico ID|RCPLAXP19-1127|



_**Table 11-4: Country Transmitter IDs (xPico 270)**_ 

|**Country**|**Specification**|
|---|---|
|||
|USA FCC ID|R68XPICO200|
|Canada IC ID|3867A-XPICO200|
|Japan ID|**Contact Lantronix Sales|
|China SRRC|**Contact Lantronix Sales|
|India ID|ETA-SD-20190601953|
|Taiwan ID|CCAJ19LP6151T1|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_48_ 

Mexico ID RCPLAXP19-1125 

**For additional regional certification requests please contact your local Lantronix sales team member. 

## **Federal Communication Commission Interference Statement (xPico 240/250/270)** 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

- Consult the dealer or an experienced radio/TV technician for help. 

**FCC Caution:** Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 

## _**Operations in the 5.15-5.25GHz band are restricted to indoor usage only.**_ 

## **Radiation Exposure Statement:** 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 

## **This device is intended only for OEM integrators under the following conditions:** 

1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 

2) The transmitter module may not be co-located with any other transmitter or antenna. 

As long as **2** conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_49_ 

**IMPORTANT NOTE:** _In the event that these conditions cannot be met (for example certain laptop configurations or colocation with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization._ 

## **End Product Labeling** 

This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: R68XPICO200”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. 

## **Manual Information to the End User** 

The OEM integrator must not provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. 

The end user manual shall include all required regulatory information/warning as show in this manual. 

## **Industry Canada Statement (xPico 240/250/270):** 

This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

Ce dispositif est conforme à la norme CNR-247 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. 

## **Radiation Exposure Statement:** 

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 

## **Déclaration d'exposition aux radiations:** 

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 

## **This device is intended only for OEM integrators under the following conditions: (For module device use)** 

1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 

2) The transmitter module may not be co-located with any other transmitter or antenna. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_50_ 

As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. 

## **Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositive module** ) 

1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et 

2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. 

Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. 

## **IMPORTANT NOTE:** 

_In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization._ 

## **NOTE IMPORTANTE:** 

_Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada._ 

## **Plaque signalétique du produit final** 

Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 3867A-XPICO200". 

## **Manual Information To the End User** 

The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. 

The end user manual shall include all required regulatory information/warning as show in this manual. 

## **Manuel d'information à l'utilisateur final** 

L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. 

Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_51_ 

## **Caution :** 

_(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems;_ 

_(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;_ 

_(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and_ 

_(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices._ 

## **Avertissement:** 

Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : 

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; 

(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 à 5 350 MHz et de 5470 à 5725 MHz doit être conforme à la limite de la p.i.r.e; 

(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour l'exploitation point à point et l’exploitation non point à point, selon le cas; 

(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_52_ 

**==> picture [250 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Figure 11-1  EU Declaration of Conformity (xPico 240/250)<br>**----- End of picture text -----**<br>


_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_53_ 

## **Figure 11-2  EU Declaration of Conformity (xPico 270)** 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_54_ 

## _**Table 11-5: Europe – EU Declaration of Conformity (xPico 240/250/270)**_ 

|Česky [Czech]<br>**cs**|Lantronix tímto prohlašuje, že tento xPico 200 je ve shodě se základními požadavky a<br>dalšími příslušnými ustanoveními směrnice 2014/53/EU.|
|---|---|
|Dansk [Danish]<br>**da**|Undertegnede Lantronix erklærer herved, at følgende udstyr xPico 200 overholder de<br>væsentlige krav og øvrige relevante krav i direktiv 2014/53/EU.|
|Deutsch [German]<br>**de**|Hiermit erklärt Lantronix, dass sich das Gerät xPico 200 in Übereinstimmung mit den<br>grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der<br>Richtlinie 2014/53/EU befindet.|
|Eesti [Estonian]<br>**et**|Käesolevaga kinnitab Lantronix seadme xPico 200 vastavust direktiivi 2014/53/EU<br>põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.|
|English<br>**en**|Hereby, Lantronix, declares that this xPico 200 is in compliance with the essential<br>requirements and other relevant provisions of Directive 1999/5/EC.|
|**en**||
|Español [Spanish]<br>**es**|Por medio de la presente Lantronix declara que el xPico 200 module cumple con los<br>requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la<br>Directiva 2014/53/EU.|
|Ελληνική [Greek]<br>**el**|ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Lantronix ΔΗΛΩΝΕΙ ΟΤΙ xPico 200 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ<br>ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ<br>2014/53/EU.|
|Français [French]<br>**fr**|Par la présente Lantronix déclare que l'appareil xPico 200 est conforme aux exigences<br>essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU.|
|Italiano [Italian]<br>**it**|Con la presente Lantronix dichiara che questo xPico 200 è conforme ai requisiti<br>essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2014/53/EU.|
|**it**||
|Latviski [Latvian]|Ar šo Lantronix deklarē, ka xPico 200 atbilst Direktīvas 2014/53/EU būtiskajām<br>prasībām un citiem ar to saistītajiem noteikumiem.|
|Lietuvių [Lithuanian]|Šiuo Lantronix deklaruoja, kad šis xPico 200 atitinka esminius reikalavimus ir kitas<br>2014/53/EU Direktyvos nuostatas.|
|Nederlands [Dutch]<br>**nl**|Hierbij verklaart Lantronix dat het toestel xPico 200 overeenstemming is met de<br>essentiële eisen en de andere relevante bepalingen van richtlijn 2014/53/EU.|
|Malti [Maltese]<br>**mt**|Hawnhekk, Lantronix, jiddikjara li dan xPico 200 jikkonforma malħtiġijiet essenzjali u ma<br>provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.|
|Magyar [Hungarian]<br>**hu**|Alulírott, Lantronix nyilatkozom, hogy a xPico 200 megfelel a vonatkozó alapvetõ<br>követelményeknek és az 2014/53/EU irányelv egyéb elõírásainak.|
|Polski [Polish]<br>**pl**|Niniejszym Lantronix oświadcza, że xPico 200 jest zgodny z zasadniczymi wymogami<br>oraz pozostałymi stosownymi postanowieniami Dyrektywy 2014/53/EU.|
|Português<br>[Portuguese]<br>**pt**|Lantronix declara que este xPico 200 está conforme com os requisitos essenciais e<br>outras disposições da Directiva 2014/53/EU.|
|Slovensko<br>[Slovenian]<br>**sl**|Lantronix izjavlja, da je ta xPico 200 v skladu z bistvenimi zahtevami in ostalimi<br>relevantnimi določili direktive 2014/53/EU.|
|Slovensky [Slovak]|Lantronix týmto vyhlasuje, že xPico 200 enterprise Wi-Fi IoT module spĺňa základné<br>požiadavky a všetky príslušné ustanovenia Smernice 2014/53/EU.|
|Suomi [Finnish]<br>**fi**|Lantronix  vakuuttaa täten että xPico 200 tyyppinen laite on direktiivin 2014/53/EU<br>oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.|
|Svenska [Swedish]<br>**sv**|Härmed intygar Lantronix att denna xPico 200 står I överensstämmelse med de<br>väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv<br>2014/53/EU.|



## 查詢 NB no. 

= http://ec.europa.eu/enterprise/newapproach/nando/index.cfm?fuseaction notifiedbody.main 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_55_ 

## **RoHS, REACH, and WEEE Compliance Statement** 

Please visit http://www.lantronix.com/legal/rohs/ for Lantronix’s statement about RoHS, REACH and WEEE compliance. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_56_ 

## _**12: Ordering Information**_ 

## _**Table 12-1: xPico 240 Order Information**_ 

|**Part Number**|**Description**|
|---|---|
|XPC240100B-02|xPico 240 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, Dual U.FL, Ind Temp,<br>LGA T&R 250|
|XPC240200B-02|xPico 240 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, On-module Ant, Ind<br>Temp, LGA T&R 250|
|XPC240300B-02|xPico 240 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, Dual U.FL, Ind Temp,<br>Edge Conn,Tray|
|XPC240400B-02|xPico 240 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, On-Module Ant, Ind<br>Temp, Edge Conn, Tray|
|||
|XPC240100S-02|xPico 240 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, Dual U.FL, Ind Temp,<br>LGA T&R 25|
|XPC240200S-02|xPico 240 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, On-Module Ant, Ind<br>Temp,LGA T&R 25|
|XPC240300S-02|xPico 240 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, Dual U.FL, Ind Temp,<br>Edge Conn, Single|
|XPC240400S-02|xPico 240 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, On-Module Ant, Ind<br>Temp, Edge Conn, Single|
|||
|XPC240300EK|xPico 240 Evaluation Kit with Edge Connector Module|



_**Table 12-2: xPico 250 Order Information**_ 

|**Part Number**|**Description**|
|---|---|
|XPC250100B-02|xPico 250 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, BT 4.2, Dual U.FL,<br>Ind Temp, LGA T&R 250|
|XPC250300B-02|xPico 250 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, BT 4.2, Dual U.FL,<br>Ind Temp, Edge Conn, Tray|
|||
|XPC250100S-02|xPico 250 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, BT 4.2, Dual U.FL,<br>Ind Temp, LGA T&R 25|
|XPC250300S-02|xPico 250 Embedded IoT Gateway, 802.11 a/b/g/n, Ethernet, BT 4.2, Dual U.FL,<br>Ind Temp, Edge Conn, Single|
|||
|XPC250300EK|xPico250Evaluation Kitwith Edge Connector Module|



_**Table 12-3: xPico 270 Order Information**_ 

|**Part Number**|**Description**|
|---|---|
|XPC270100B-02|xPico 270 Embedded IoT Gateway, 802.11 ac/a/b/g/n, Ethernet, BT 4.2, Dual U.FL,<br>Ind Temp, LGA T&R 250|
|XPC270300B-02|xPico 270 Embedded IoT Gateway, 802.11 ac/a/b/g/n, Ethernet, BT 4.2, Dual U.FL,<br>Ind Temp, Edge Conn, Tray|
|||
|XPC270100S-02|xPico 270 Embedded IoT Gateway, 802.11 ac/a/b/g/n, Ethernet, BT 4.2, Dual U.FL,<br>IndTemp,LGA T&R 25|
|XPC270300S-02|xPico 270 Embedded IoT Gateway, 802.11 ac/a/b/g/n, Ethernet, BT 4.2, Dual U.FL,<br>Ind Temp, Edge Conn, Single|
|||
|XPC270300EK|xPico270Evaluation Kitwith Edge Connector Module|



_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_57_ 

## **Warranty** 

The xPico 200 module comes with an industry best 5-year warranty. For more details on the Lantronix warranty replacement policy, please go to our web site at www.lantronix.com/support/warranty. 

## **Contact Information** 

For details contact your local Lantronix representative or Lantronix directly: 

- Asia Pacific Region via e-mail at asiapacific_sales@lantronix.com 

- Europe via e-mail at eu_sales@lantronix.com 

- Japan via e-mail at japan_sales@lantronix.com 

- United States via e-mail at sales@lantronix.com or call OEM sales support at 800-526-8764. 

## **Manufacturer's Contact** 

Lantronix, Inc. 7535 Irvine Center Drive Suite 100 Irvine, CA 92618 USA 

Tel: 949-453-3990 Fax: 949-453-3995 

> © 2018 Lantronix, Inc. All rights reserved. _Lantronix, MACH10_ and _xPico_ are registered trademarks of Lantronix, Inc. in the United States and other countries. Patented: http://patents.lantronix.com; additional patents pending. 

_xPico[®] 200 Series Embedded Wi-Fi[®] Gateway Data Sheet_ 

_58_
Updated at April 23, 2026
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →