XMLR250M2P05

Product data sheet Characteristics 

## XMLR250M2P05 Pressure sensors XMLR 250bar - G 1/4 - 24VDC - 2xPNP - M12 

## Main 

|Main|Main||
|---|---|---|
|Range of product<br>Product or component<br>~~ee~~||OsiSense XM<br>Electronic pressure sensors|
||type<br>Pressure sensor type<br>Pressure transmitter<br>~~a~~||
||Pressure switch type of|Pressure switch with 2 switching outputs|
||operation||
||Device short name|XMLR|
||Pressure sensor size|3620 Psi (24959.02 kPa)|
|||3625.94 psi (250 bar)|
||Maximum permissible|10877.83 Psi (750 bar)|
||accidental pressure|75 MPa|
||Destruction pressure<br>Controlled fluid<br>Fluid connection type<br>[Us] rated supply<br>voltage|10875 psi (74980.48 kPa)<br>150 MPa<br>21750 Psi (149960.96 kPa)<br>21755.66 psi (1500 bar)<br>Fresh water 32…176 °F (0…80 °C))<br>Air -4…176 °F (-20…80 °C))<br>Hydraulic oil -4…176 °F (-20…80 °C))<br>Refrigeration fluid -4…176 °F (-20…80 °C))<br>G 1/4 (female) DIN 3852-Y<br>24 V DC SELV 17…33 V)|



|Complementary<br>Current consumption<br>Electrical connection<br>Type of output signal<br>Discrete output type<br>Maximum switching current<br>Contacts type and composition<br>Scale type<br>Maximum voltage drop<br>Adjustable range of switching point on rising<br>pressure<br>Adjustable range of switching point on falling<br>pressure<br>Minimum differential travel<br>Materials in contact with fluid<br>Front material<br>Housing material<br>Operating position<br>Protection type<br>Response time on output<br>Switching output time delay<br>Display type|<= 50 mA<br>Male connector M12, 4 pins<br>Discrete<br>Solid state PNP, 2 NO/NC programmable<br>250 mA<br>2 NO/NC programmable<br>Fixed differential<br>2 V<br>290…3625 Psi (1999.48…24993.49 kPa)<br>290.08…3625.94 Psi (20…250 bar)<br>2…25 MPa<br>181.30…3509.91 Psi (12.5…242 bar)<br>1.25…24.2 MPa<br>181…3516 psi (1247.95…24241.97 kPa)<br>108.78 Psi (7.5 bar)<br>0.75 MPa<br>109 psi (751.53 kPa)<br>316L stainless steel<br>Polyester<br>Polyacrylamide<br>316L stainless steel<br>Any position, but disposals can falsified the measurement in case of upside down<br>mounting<br>Short-circuit protection<br>Overvoltage protection<br>Overload protection<br>Reverse polarity<br><= 5 ms discrete output<br>0...50 s in steps of 1 second<br>4 digits 7 segments|
|---|---|



Jan 20, 2021 

1 

|Local signalling|Light ON when switch is actuated 2 LEDs yellow)|
|---|---|
|Display response time type|Fast 50 ms|
||Normal 200 ms|
||Slow 600 ms|
|Maximum delay first up|300 ms|
|Overall accuracy|<= 1 % of the measuring range|
|Measurement accuracy on switching output|<= 0.6 % of the measuring range|
|Repeat accuracy|<= 0.2 % of the measuring range|
|Drift of the sensitivity|+/- 0.03 % of measuring range/°C|
|Drift of the zero point|+/- 0.1 % of measuring range/°C|
|Display accuracy|<= 1 % of the measuring range|
|Mechanical durability|10000000 cycles|
|Depth|1.65 in (42 mm)|
|Height|3.46 in (88 mm)|
|Width|1.61 in (41 mm)|
|Net weight|0.41 lb(US) (0.186 kg)|
|[Uimp] rated impulse withstand voltage|0.5 kV DC|
|Electromagnetic compatibility|Susceptibility to electromagnetic fields 10 V/m 80...2000 MHz EN/IEC 61000-4-3|
||Immunity to conducted RF disturbances 10 V 0.15...80 MHz EN/IEC 61000-4-6|
||Surge immunity test 1 kV EN/IEC 61000-4-5|
||Electrical fast transient/burst immunity test 2 kV EN/IEC 61000-4-4|
||Electrostatic discharge immunity test 8 kV air, 4 kV contact EN/IEC 61000-4-2|



## Environment 

|Environment||
|---|---|
|Marking|CE|
|Product certifications|CULus|
||EAC|
|Standards|EN/IEC 61326-2-3|
||UL 61010-1|
|Ambient air temperature for operation|-4…176 °F (-20…80 °C)|
|Ambient air temperature for storage|-40…176 °F (-40…80 °C)|
|IP degree of protection|IP65 EN/IEC 60529|
||IP67 conforming to EN/IEC 60529|
|Vibration resistance|20 gn 10…2000 Hz)EN/IEC 60068-2-6|
|Shock resistance|50 gn EN/IEC 60068-2-27|



## Ordering and shipping details 

|Ordering and shipping detailsg and shipping detailsand shipping detailspping detailsing detailsg detailsdetails||
|---|---|
|Category|21551 - XMLE,XMLF,XMLG PRESSURE SENSORS|
|Discount Schedule|DS2|
|GTIN|03389119611640|
|Nbr. of units in pkg.|1|
|Package weight(Lbs)|0.41 lb(US) (0.19 kg)|
|Returnability|No|
|Country of origin|CH|



## Packing Units 

|Packing Unitsg UnitsUnits||
|---|---|
|Unit Type of Package 1|PCE|
|Package 1 Height|2.91 in (7.4 cm)|
|Package 1 width|5.12 in (13 cm)|
|Package 1 Length|2.60 in (6.6 cm)|
|Unit Type of Package 2|S02|
|Number of Units in Package 2|20|
|Package 2 Weight|8.86 lb(US) (4.02 kg)|
|Package 2 Height|5.91 in (15 cm)|
|Package 2 width|11.81 in (30 cm)|
|Package 2 Length|15.75 in (40 cm)|



2 

|Offer Sustainability||||
|---|---|---|---|
|California proposition 65|WARNING: This product can expose you to chemicals including: Diisononyl||WARNING: This product can expose you to chemicals including: Diisononyl|
||phthalate (DINP), which is known to the State of California to cause cancer,|||
||and Di-isodecyl phthalate (DIDP), which is known to the State of California||and Di-isodecyl phthalate (DIDP), which is known to the State of California|
||to cause birth defects or other reproductive harm. For more information go to|||
||www.P65Warnings.ca.gov|||
|REACh Regulation|REACh Declaration<br>Ee|||
|REACh free of SVHC|Yes|||
|EU RoHS Directive|Pro-active compliance (Product out of EU RoHS legal scope)|iy|EU RoHS|
||Declaration|||
|Mercury free|Yes|||
|RoHS exemption information|Yes<br>Ee|||



3 

Product data sheet Dimensions Drawings 

## XMLR250M2P05 

## Dimensions 

(1) Fluid entry: G 1/4 A female 

4 

Product data sheet Connections and Schema 

## XMLR250M2P05 

## Connections and Schema 

## Connector Wiring 

5 

Product data sheet Performance Curves 

## XMLR250M2P05 

## Switching Output Description. Hysteresis Mode 

The hysteresis switching mode is typically used for the “pumping and/or emptying applications”. 

- X : Time Y : Pressure (1) Output 

NP : Nominal Pressure 

SP : Set point (adjustable from 8 % to 100 % NP) 

- rP : Reset point (adjustable from 5 % to 97 % NP) 

## Switching Output Description. Window Mode 

The window switching mode is typically used for the “pressure regulation applications” 

X : Time Y : Pressure (1) Output NP : Nominal pressure FH : High switching point (adjustable from 8 % to 100 % NP) FL : Low switching point (adjustable from 5 % to 97 % NP) 

## Switching Output Description. Time Delay 

The Time Delay is typically used to filter out the fast pressure transients. The output only switches after a time “dS” and “dr” adjustable from 0 to 50 seconds. 

6 

X : Time 

Y : Pressure (1) Output 

SP : Set point rP : Reset point 

dS : Time delay on the set point 

dr : Time delay on the reset point 

7