UWT1V220MCL1GB

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UWT** 

Chip Type, Wide Temperature Range 

Chip type operating over wide temperature range of to –55 to +105°C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). 

**==> picture [22 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
UWZ<br>**----- End of picture text -----**<br>


Compliant to the RoHS directive (2011/65/EU). High Temperature Reflow Values marked with an in the dimension table **UWF** Lowimpeadance are scheduled to be discontinued and are not **UWT** recommended for new designs. **UUT** Long Life Smaller <3 

## **UWT** 

## **UZT** 

## Specifications Item ~~BR~~ 

Item Performance Characteristics Category Temperature Range –55 to +105°C ~~es~~ Rated Voltage Range 4 to 50V ~~es~~ Rated Capacitance Range 0.1 to 1500µF ~~Rsnr~~ Capacitance Tolerance ±20% at 120Hz, 20°C ~~esGe~~ Leakage Current After 2 minutes' application of rated voltage,  leakage current is not more than 0.01CV or 3 (µA) ,  whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) 4 6.3 10 16 25 35 50 tan  δ (MAX.) 0.40 0.30 0.24 0.20 0.16 0.14 0.14 ~~a~~ Measurement frequency : 120Hz Rated voltage (V) 4 6.3 10 16 25 35 50 Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C 7 4 3 2 2 2 2 ZT / Z20 (MAX.) Z–40°C / Z+20°C 15 8 8 4 4 3 3 The specifications listed at right shall be Capacitance Within ±25% of the initial capacitance value for capacitors of φ3mm unit,  and 16V or less. Endurance met when the capacitors are restored to change Within ±20% of the initial capacitance value for capacitors of 25V or more. 20°C after the rated voltage is applied for tan δ 200% or less than the initial specified value 1000 hours at 105°C. Leakage current Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Resistance to solderingheat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are Ctan apδacitance change Within ±10% of the initial caLess than or equal to the initial spacitance valuepecified value ~~i~~ removed from the plate and restored to 20°C. Leakage current Less than or equal to the initial specified value Marking Black print on the case top. ~~Ps~~ 

## Chip Type 

**==> picture [221 x 193] intentionally omitted <==**

**----- Start of picture text -----**<br>
(φ3 to φ8 × 5.4 ) Positive<br>Capacitance : 1 Plastic platform<br>105˚C Marking Voltage 0.3 MAX. C±0.2<br>© - :<br>Lot No. © * 2 a (L±0.3)L +0.1–0.2 3 H ice Negative<br>3 Apply to φ6.3 × 5.8, φ6.3 × 7.7<br>(φ8 × 10,  φ10 × 10 ) Positive<br>Capacitance<br>105Trade mark˚C Marking Voltage1 Plastic platform0.3 MAX. C±0.2<br>L±0.5 H<br>° Lot No. Pressure relief vent eS Negative<br>0.5 MAX.<br>A±0.2<br>E<br>A2P 10 16V D±0.5φ B±0.2 A±0.2<br>0.5 MAX.<br>A±0.2<br>E<br>A2P 100 35V D±0.5φ B±0.2 A±0.2<br>**----- End of picture text -----**<br>


1.  Voltage mark for 6.3V is   6V .  In case of marking for  φ3 units,  “V” for rated voltage is omitted. 

**==> picture [264 x 247] intentionally omitted <==**

**----- Start of picture text -----**<br>
Type numbering system  (Example : 16V 10µF)<br>1 2 3 4 5 6 7 8 9 10 11 12 13 14 φD code<br>U W T 1 C 1 0 0 M C L 1 G B 3 to 8 (5.4L) GB<br>6.3 to 10 (L    5.8) GS<br>Package code<br>Size code<br>Configuration φD code<br>COCO Goo Capacitance tolerance (±20%) φD code 3 2<br>Rated capacitance (10µF) 3 to 8 (L   7.7) CL 4 to 10 1<br>KS 8 to 10 (L = 10) NL<br>Rated voltage (16V)<br>ee<br>Series name<br>Type<br>(mm)<br>φD × L<br>3 × 5.4 4 × 5.4 5 × 5.4 6.3 × 5.4 6.3 × 5.8 6.3 × 7.7 8 × 5.4 8 × 10 10 × 10<br>A 1.5 1.8 2.1 2.4 2.4 2.4 3.3 2.9 3.2<br>B 3.3 4.3 5.3 6.6 6.6 6.6 8.3 8.3 10.3<br>C 3.3 4.3 5.3 6.6 6.6 6.6 8.3 8.3 10.3<br>a<br>E 0.8 1.0 1.3 2.2 2.2 2.2 2.3 3.1 4.5<br>a ee ee ee ee<br>L 5.4 5.4 5.4 5.4 5.8 7.7 5.4 10 10<br>a ee ee ee ee<br>H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1<br>**----- End of picture text -----**<br>


2.  In case of marking for  φ3 units. Lot No is expressed by a digit (month code). 

fe Dimension table in next page. 

108 | 

CAT.8100E ~~—~~ 

**ALUMINUM  ELECTROLYTIC  CAPACITORS** 

## **UWT** 

## Dimensions 

**==> picture [512 x 66] intentionally omitted <==**

**----- Start of picture text -----**<br>
V 4 6.3 10 16 25 35 50<br>Cap. (µF) Code 0G 0J 1A 1C 1E 1V 1H<br>0.1 0R1 4 × 5.4 (3) 1.0<br>0.22 R22 4 × 5.4 (3) 2.6<br>0.33 R33 4 × 5.4 (3) 3.2<br>0.47 R47 4 × 5.4 (3) 3.8<br>**----- End of picture text -----**<br>


|V<br>Code<br>Cap.(µF)|V<br>Code<br>Cap.(µF)|**4**|**4**|**6.3**|**6.3**|**10**|**10**|**16**|**16**|**25**|**25**|**35**|**35**|**50**|**50**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||0G||0J||1A||1C||1E||1V||1H||
|**0.1**|0R1|||||||||||||<br>4×5.4(3)|1.0|
|**0.22**|R22|||||||||||||<br>4×5.4(3)|2.6|
|**0.33**|R33|||||||||||||<br>4×5.4(3)|3.2|
|**0.47**|R47|||||||||||||<br>4×5.4(3)|3.8|
|**1**|010|||||||||||||4×5.4(3)|6.3(5.9)|
|**2.2**|2R2|||||||||||3×5.4|7.5|4×5.4(3)|11(9)|
|**3.3**|3R3|||||||||||3×5.4|9|4×5.4|14|
|**4.7**|4R7|||||||||4×5.4(3)<br>|13(10)|4×5.4|15|5×5.4|19|
|**10**|100|||||||4×5.4(3)|18(14)|5×5.4|23|5×5.4|25|6.3×5.4|30|
|**22**|220|4×5.4|22|4×5.4|22|5×5.4|27|5×5.4|30|6.3×5.4|<br>38|6.3×5.4|42|8×5.4|51(45)|
|**33**|330|5×5.4|30|5×5.4|30|5×5.4|35|6.3×5.4|40|6.3×5.4|48|8×5.4<br>|59(52)|6.3×7.7|60|
|**47**|470|5×5.4|36|5×5.4|36|6.3×5.4|46|6.3×5.4|50|8×5.4|66(59)|6.3×5.8|63|6.3×7.7|63|
|**100**|101<br>|6.3×5.4|60|6.3×5.4|60|6.3×5.4|60|6.3×5.4|<br>60|6.3×7.7|91|6.3×7.7|84|8×10|140|
|**150**|151<br>|6.3×5.8|86|6.3×5.8|86|6.3×5.8|86|6.3×7.7|95|8×10|140|8×10|155|10×10|180|
|**220**|221|8×5.4|102(91)|8×5.4|102(91)|6.3×7.7<br>|105|6.3×7.7|105|8×10|155|8×10|190|10×10|220|
|**330**|331<br>|6.3×7.7|105|6.3×7.7|105|8×10<br>|195|8×10|195|8×10|190|10×10|300|||
|**470**|471|8×10|210|8×10|210|8×10<br>|210|8×10|<br>230|10×10|300|||||
|**680**|681|8×10|210|8×10|210|10×10<br>|310|10×10|310|||||||
|**1000**|102|8×10|230|8×10|230|10×10<br>|310|||||||Case size<br>φD×L (mm)|Rated<br>ripple|
|**1500**|152|10×10|310|10×10|310|||||||||||



(   ) is also available with φ3mm upon request.  In such a case, 2 will be put at 12th digit of type numbering system. 

Rated ripple current (mArms) at 105°C 120Hz 

Size φ6.3 × 5.8 is available for capacitors marked.   " "   In such a case, 6 will be  put at 12th digit of type numbering system. 

## Frequency coefficient of rated ripple current 

|Frequency|50 Hz|120 Hz|300 Hz|1 kHz|10 kHz or more|
|---|---|---|---|---|---|
|Coefficient|0.70|1.00|1.17|1.36|1.50|



Taping specifications are given in page 23. 

Recommended land size, soldering by reflow are given in page 18, 19. 

Please select UUX(p.152), UUJ(p.158) series if high C/V products are reqired. Please refer to page 3 for the minimum order quantity. 

CAT.8100E 

109