UUX1E470MCL1GS

## **CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC  CAPACITORS** Chip Type, Standard **CF** series S ~~a~~ [cIFp ~~s~~ Y 

Ultra Low ESR, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. 

Adapted to the RoHS directive (2002/95/EC). 

## Specifications 

Item Performance Characteristics Category Temperature Range –55 to +105°C a Rated Voltage Range 2.5 to 25V ee Rated Capacitance Range 3.3 to 1500µF es Capacitance Tolerance ±20%    at 120Hz, 20°C Re Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C a ESR[(] 1) Less than or equal to the specified value at 100kHz, 20°C ee a Leakage Current ( 2) Less than or equal to the specified value.    After 2 minutes' application of rated voltage at 20°C Temperature Characteristics Z+105°C / Z+20°C 1.25       (100kHz) (Max.Impedance Ratio) Z– 55°C / Z+20°C 1.25 Capacitance change Within ± 20% of the initial value ( 3) Endurance The specifications listed at right shall be met when thecapacitors are restored to 20°C after the rated voltage is tan ESRδ ( 1) 150% or less of the initial specified value150% or less of the initial specified value applied for 2000 hours at 105°C Leakage current ( 2) Less than or equal to the initial specified value a Capacitance change Within ± 20% of the initial value ( 3) Damp Heat The specifications listed at right shall be met when the tan δ 150% or less of the initial specified value (Steady State) capacitors are restored to 20°C after the rated voltage is SO ESR ( 1) 150% or less of the initial specified value applied for 1000 hours at 60°C, 90% RH. a Leakage current ( 2) Less than or equal to the initial specified value a After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed Capacitance change Within ± 10% of the initial value ( 3) at right, provided that it's temperature profile is measured at the tan δ 130% or less of the initial specified value capacitor top and the terminal.Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. a ESR ( 1) 130% or less of the initial specified value Resistance to The duration for over +230°C temperature at capacitor surface a Leakage current ( 2) Less than or equal to the initial specified value shall not exceed 60 seconds. Soldering Heat In the case of peak temp, less than 250°C, reflow soldering shall be two times maximum. In the case of peak temp, less than 260°C, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the | capacitor top and the terminal. = sD Marking Navy blue print on the case top 1  ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2  Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 

3  Initial value : The value before test of examination of resistance to soldering. 

**==> picture [511 x 220] intentionally omitted <==**

**----- Start of picture text -----**<br>
| Dimensions B Positive Type numbering system  (Example : 6.3V 150µF)<br>Capacitance Lot No. Plastic platform0.3 MAX. C±0.2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 φD Taping codeCode<br>7 P C F 0 J 1 5 1 M C L 1 G S 4 to 6.3（5.5L） GB<br>5 to 10（L 6） GS<br>; [LIL 1 1— -——|— Size code<br>Configuration<br>Series . Voltage ( j:6.3v) La L +0.1-0.4 |ed ee Negative Capacitance toleranc (Rated Capacitance (150±20%)µF)<br>H<br>Rated voltage (6.3V)<br>Series name<br>Type<br>(mm)<br>es Size φ4 × 5.5L φ5 × 6L φ6.3 × 5.5L φ6.3 × 6L φ8 × 7L φ8 × 12L φ10 × 8L φ10 × 10L φ10 × 12.7L<br>φD 4.0 5.0 6.3 6.3 8.0 8.0 10.0 10.0 10.0<br>a es es ss<br>L 5.4 5.9 5.4 5.9 6.9 11.9 7.9 9.9 12.6<br>a es es rs QO<br>a A 5.0 ss 6.0 7.3 ss 7.3 9.0 9.0 11.0 11.0 11.0<br>a B 4.3 ss 5.3 6.6 6.6 ss 8.3 8.3 10.3 10.3 10.3 Voltage<br>C 4.3 5.3 6.6 6.6 8.3 8.3 10.3 10.3 10.3<br>es a OO V 2.5 4 6.3 10 16 20 25<br>E 1.0 1.6 2.1 2.1 3.2 3.2 4.6 4.6 4.6<br>H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Code e g j A C D E<br>a OO A pf<br>0.5 MAX.<br>CF 015 j 148 B0.2± E A0.2±<br>D + 0.5 MAX.φ<br>**----- End of picture text -----**<br>


fe Dimension table in next page. 

CAT.8100X 

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC CAPACITORS** 

## **CF** series 

## Standard ratings 

**==> picture [512 x 623] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage Surge Voltage Rated Capacitance Case Size Leakage Current ESR (mΩ) Rated ripple<br>(V)(code)  (V) (µF) φD × L (mm) tan δ (µA) (at 100kHz 20°C) (mArms) Part Number<br>  100 6.3 × 6  0.12 100 22 2600 PCF0E101MCL1GS<br>  220    6.3 × 5.5  0.12 110 20 2800 PCF0E221MCL4GB<br>  220 6.3 × 6  0.12 110 20 2800 PCF0E221MCL1GS<br>2.5<br>2.8   470   8 × 7 0.12 235 20 3300 PCF0E471MCL1GS<br>（0E）�<br>  820 10 × 8 0.12 410 17 4400 PCF0E821MCL1GS<br>1500   10 × 10 0.12 750 13 4700 PCF0E152MCL1GS<br>1500      10 × 12.7 0.12 750 12 5440 PCF0E152MCL9GS<br>    33       4 × 5.5  0.12 100 200 700 PCF0G330MCL1GB<br>  100    6.3 × 5.5  0.12 100 22 2600 PCF0G101MCL4GB<br>  100   6.3 × 6    0.12 80 22 2600 PCF0G101MCL1GS<br>  150   6.3 × 5.5 0.12 120 22 2800 PCF0G151MCL4GB<br>  150   5 × 6 0.12 300 30 2000 PCF0G151MCL6GS<br>  150   6.3 × 6    0.12 120 22 2800 PCF0G151MCL1GS<br>4<br>4.6   220   8 × 7 0.12 176 21 3200 PCF0G221MCL1GS<br>（0G）�<br>  330   8 × 7 0.12 264 21 3400 PCF0G331MCL1GS<br>  470 10 × 8 0.12 376 17 4200 PCF0G471MCL1GS<br>  560     8 × 12 0.12 448 13 4520 PCF0G561MCL4GS<br>  680 10 × 8 0.12 544 17 4400 PCF0G681MCL1GS<br>  820   10 × 10 0.12 656 13 4800 PCF0G821MCL1GS<br>1200      10 × 12.7 0.12 960 10 5500 PCF0G122MCL1GS<br>    22         4 × 5.5    0.12 100 200 700 PCF0J220MCL1GB<br>    47      5 × 6    0.12 148 35 1600 PCF0J470MCL1GS<br>    82   6.3 × 5.5 0.12 103 23 2600 PCF0J820MCL4GB<br>    82   6.3 × 6    0.12 103 23 2600 PCF0J820MCL1GS<br>  100   6.3 × 5.5 0.12 126 23 2800 PCF0J101MCL4GB<br>  100   5 × 6 0.12 315 25 2200 PCF0J101MCL6GS<br>  100   6.3 × 6    0.12 126 23 2800 PCF0J101MCL1GS<br>  120   6.3 × 6    0.12 151 23 3000 PCF0J121MCL1GS<br>6.3<br>7.2   150   8 × 7 0.12 189 22 3200 PCF0J151MCL1GS<br>（0J）�<br>  220   8 × 7 0.12 277 22 3400 PCF0J221MCL1GS<br>  330 10 × 8 0.12 416 18 4200 PCF0J331MCL1GS<br>  470     8 × 12 0.12 592 12 5300 PCF0J471MCL4GS<br>  470 10 × 8 0.12 592 18 4300 PCF0J471MCL6GS<br>  470   10 × 10 0.12 592 16 4600 PCF0J471MCL1GS<br>  680   10 × 10 0.12 857 14 5000 PCF0J681MCL1GS<br>  680      10 × 12.7 0.12 857 10 5500 PCF0J681MCL9GS<br>  820      10 × 12.7 0.12 1033 10 5800 PCF0J821MCL1GS<br>         4.7       4 × 5.5  0.12 100 240 670 PCF1A4R7MCL1GB<br>         6.8       4 × 5.5  0.12 100 240 670 PCF1A6R8MCL1GB<br>    10       4 × 5.5  0.12 100 220 700 PCF1A100MCL1GB<br>    15       4 × 5.5  0.12 100 200 700 PCF1A150MCL1GB<br>    33      5 × 6    0.12 165 35 1500 PCF1A330MCL1GS<br>    47      5 × 6    0.12 235 26 2600 PCF1A470MCL6GS<br>    47   6.3 × 6    0.12 94 26 2600 PCF1A470MCL1GS<br>    56   6.3 × 5.5 0.12 112 25 2500 PCF1A560MCL4GB<br>    56   6.3 × 6    0.12 112 25 2500 PCF1A560MCL1GS<br>10   120   8 × 7 0.12 240 23 3000 PCF1A121MCL1GS<br>11.5<br>（1A）�   150   8 × 7 0.12 300 23 3200 PCF1A151MCL6GS<br>  150 10 × 8 0.12 300 21 3300 PCF1A151MCL1GS<br>  270     8 × 12 0.12 540 13 4500 PCF1A271MCL4GS<br>  270 10 × 8 0.12 540 20 3600 PCF1A271MCL1GS<br>  330     8 × 12 0.12 660 14 4000 PCF1A331MCL4GS<br>  330 10 × 8 0.12 660 20 3700 PCF1A331MCL1GS<br>  470   10 × 10 0.12 940 16 4600 PCF1A471MCL1GS<br>  470       10 × 12.7  0.12 940 12 5300 PCF1A471MCL9GS<br>  560   10 × 10 0.12 1120 15 4800 PCF1A561MCL1GS<br>  560       10 × 12.7  0.12 1120 13 5230 PCF1A561MCL9GS<br>**----- End of picture text -----**<br>


CAT.8100X 

**CONDUCTIVE  POLYMER  ALUMINUM  SOLID  ELECTROLYTIC CAPACITORS** 

## **CF** series 

## Standard ratings 

**==> picture [512 x 389] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Voltage Surge Voltage Rated Capacitance Case Size Leakage Current ESR (mΩ) Rated ripple<br>(V)(code)  (V) (µF) φD × L (mm) tan δ (µA) (at 100kHz 20°C) (mArms) Part Number<br>         3.3      4 × 5.5 0.12 100 260 660 PCF1C3R3MCL1GB<br>    22   5 × 6 0.12 176 45 1210 PCF1C220MCL1GS<br>    33   6.3 × 6    0.12 106 31 2400 PCF1C330MCL1GS<br>    39   6.3 × 5.5 0.12 124 31 2400 PCF1C390MCL4GB<br>    39   6.3 × 6    0.12 124 31 2400 PCF1C390MCL1GS<br>16     56   8 × 7 0.12 179 30 2900 PCF1C560MCL1GS<br>18.4<br>（1C）�     82   8 × 7 0.12 262 28 3200 PCF1C820MCL1GS<br>  100 10 × 8 0.12 320 27 3300 PCF1C101MCL1GS<br>  150 10 × 8 0.12 480 25 3500 PCF1C151MCL1GS<br>  180     8 × 12 0.12 576 16 4400 PCF1C181MCL4GS<br>  180 10 × 8 0.12 576 25 3600 PCF1C181MCL1GS<br>  220   10 × 10 0.12 704 20 3900 PCF1C221MCL1GS<br>  220      10 × 12.7 0.12 704 14 5050 PCF1C221MCL9GS<br>  330      10 × 12.7 0.12 1056 14 5000 PCF1C331MCL1GS<br>    10   5 × 6 0.12 100 120 900 PCF1D100MCL1GS<br>    22   6.3 × 5.5 0.12 100 50 1700 PCF1D220MCL4GB<br>    22   6.3 × 6    0.12 88 50 1700 PCF1D220MCL1GS<br>    39   8 × 7 0.12 156 45 2000 PCF1D390MCL1GS<br>    47   8 × 7 0.12 188 45 2000 PCF1D470MCL1GS<br>20     56 10 × 8 0.12 224 40 2400 PCF1D560MCL1GS<br>23<br>（1D）�     68 10 × 8 0.12 272 40 2600 PCF1D680MCL1GS<br>    82 10 × 8 0.12 328 40 2600 PCF1D820MCL1GS<br>  100     8 × 12 0.12 400 22 3200 PCF1D101MCL1GS<br>  120   10 × 10 0.12 480 35 2800 PCF1D121MCL1GS<br>  150      10 × 12.7 0.12 600 20 3900 PCF1D151MCL1GS<br>         6.8 6.3 × 6  0.12 85 80 1200 PCF1E6R8MCL1GS<br>    10   8 × 7 0.12 125 60 1600 PCF1E100MCL1GS<br>    22 10 × 8 0.12 275 50 2200 PCF1E220MCL1GS<br>25 28.7     33     8 × 12 0.12 413 30 2800 PCF1E330MCL1GS<br>（1E）�<br>    47     8 × 12 0.12 588 30 3000 PCF1E470MCL4GS<br>    47   10 × 10 0.12 588 45 2400 PCF1E470MCL1GS<br>    56      10 × 12.7 0.12 700 28 3200 PCF1E560MCL1GS<br>**----- End of picture text -----**<br>


Rated Ripple  (mArms) at 105°C 100kHz 

Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 

No marked, 1 will be put at 12th digit of type numbering system. : In this case, 4 will be put at 12th digit of type numbering system. : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 9 will be put at 12th digit of type numbering system. 

CAT.8100X