TIW 12-124

**AC/DC Power Supply** 

**TIW 12 Series, 12 Watt** 

- **High efficiency switching power supplies** 

- **Easy installation into standard flush boxes** 

- **Fully encapsulated plastic housing** 

- **Dust and waterproof to IP 67** 

- **Protection class ll** 

- **Safety approval to IEC/EN 62368-1, EN 50178, IEC/EN 60335-1** 

- **Approved for mounting onto wood or materials with unknown flammability** 

- **Ready to meet ErP directive** 

- **Universal input range 90 to 264 VAC** 

- **Regulated output voltage** 

UL 60950-1 IEC 60335-1 IEC 62368-1 

The TIW series is a new range of small size DC-power supplies which have been designed particularly for applications in home and office installations. The compact module cases fit in the standardized in-wall flush boxes or also can be mounted on walls. The power supplies fully comply with the safety and EMC standards requested for commercial and residential class ll installations. Typical applications are powering of electric devices used in home automation and in security systems like e.g. controllers, indicators, etc. 

|**Order Code**|**Output Power**<br>**max.**|**Output Voltage**<br>**nom.**|**Output Current**<br>**max.**|**Output Current**<br>**peak**|**Efficiency**<br>**typ.**|
|---|---|---|---|---|---|
|**TIW 12-112**<br>**TIW 12-115**<br>**TIW 12-124**|12 W|12 VDC<br>15 VDC<br>24 VDC|1'000 mA<br>800 mA<br>500 mA|1'300 mA<br>1'040 mA<br>650 mA|79 %<br>80 %<br>81 %|



**Page 1 / 4** 

**November 30, 2022** 

**www.tracopower.com** 

**TIW 12 Series, 12 Watt** 

## **Input Specifications** 

Input Voltage - AC Range Operational Range: 90 - 264 VAC (Full Range) Rated Range: 100 - 240 VAC (Full Range) - DC Range Operational Range: 130 - 375 VDC (Designed for, no certification) Polarity: +DC: L / –DC: N Input Frequency Operational Range: 47 - 63 Hz Certified: 50/60 Hz Power Consumption - No load & Vin = 230 VAC 300 mW max. (Ready to meet ErP directive) - No load & Vin = 115 VAC 300 mW max. Input Inrush Current - At 230 VAC 24 A max. - At 115 VAC 12 A max. Recommended Input Fuse 6'000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) 

## **Output Specifications** 

|Voltage Set Accuracy||±3% max.|
|---|---|---|
|Regulation|- Input Variation (Vmin - Vmax)|1% max.|
||- Load Variation(0 - 100%)|2% max.|
|Boost Power||Output Current peak: See model table|
|||Peak power time: 10 s max.|
|||Peakpower dutycycle: 10% max.|
|Ripple and Noise||200 mVp-p max.|
|(20 MHz Bandwidth)|||
|Minimum Load||Not required|
|Hold-up Time|- At 230 VAC|20 ms min.|
||- At 115 VAC|3 ms min.|
|Start-up Time|- At 230 VAC|1'000 ms max.|
||- At 115 VAC|1'000 ms max.|
|Short Circuit Protection||Continuous,Automatic recovery|
|Output Current Limitation||600% max. of Iout max.|



## **Safety Specifications** 

Safety Standards - IT / Multimedia Equipment 

- Household 

- Power Installation 

- LED Modules Controlgear 

- Luminaires for Furniture 

- Power Transformers 

- Certification Documents Protection Class Class 2 Power Units 

EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 EN 60335-1 IEC 60335-1 EN 50178 IEC 62103 EN 61347-1 EN 61347-2-13 VDE 0710-14 EN 61558-1 EN 61558-2-8 EN 61558-2-16 www.tracopower.com/overview/tiw12 Class I & II (Prepared): Reinforced Insulation UL 1310 

All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. 

**Page 2 / 4** 

**November 30, 2022** 

**www.tracopower.com** 

**TIW 12 Series, 12 Watt** 

## **EMC Specifications** 

EMI Emissions - Conducted Emissions - Radiated Emissions - Harmonic Current Emissions EMS Immunity - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) / Surge - Conducted RF Disturbances - Voltage Dips & Interruptions 

EN 61000-6-3 (Generic Residential) EN 55014-1 (internal filter) EN 55032 class B (internal filter) EN 55014-1 (internal filter) EN 55032 class B (internal filter) EN 61000-3-2, class A EN 61000-6-2 (Generic Industrial) EN 61204-3 (Low Voltage Power Supplies) Air: EN 61000-4-2, ±8 kV, perf. criteria B Contact: EN 61000-4-2, ±4 kV, perf. criteria B EN 61000-4-3, 3 V/m, perf. criteria A EN 61000-4-4, ±0.5 kV, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria B L to L: EN 61000-4-5, ±1 kV, perf. criteria A EN 61000-4-6, 3 Vrms, perf. criteria A 230 VAC / 50 Hz: EN 61000-4-11 30%, 0.5 periods, perf. criteria A 60%, 5 periods, perf. criteria B 115 VAC / 60 Hz: EN 61000-4-11 30%, 0.5 periods, perf. criteria B 60%, 5 periods, perf. criteria B 

## **General Specifications** 

|Relative Humidity||100% max.|
|---|---|---|
|Temperature Ranges|- Operating Temperature|–25°C to +50°C(without derating)|
|||(Please take heat sources (such as lamps) nearby|
|||into consideration for ambient temperature of the|
|||power supply.)|
|Power Derating|- Low Input Voltage|0.45 %/V below 187 VAC(down to 132 VAC)|
|||0.67 %/V below 115 VAC(down to 90 VAC)|
|||0.3 %/V below 224 VDC(down to 142 VDC)|
|||0.5 %/V below 120 VDC(down to 90 VDC)|
|Over Temperature|- Protection Mode|140°C typ.(Automatic recovery)|
|Protection Switch Off|- Measurement Point|Internal IC temperature|
|CoolingSystem||Natural convection(20 LFM)|
|Altitude DuringOperation||3'000 m max.|
|Insulation System||Reinforced Insulation|
|Isolation Test Voltage|- Input to Output,60 s|3'000 VAC|
|Leakage Current|- Touch Current|0.25 mA max.|
|(at 254.4 VAC / 60Hz)|||
|Reliability|- Calculated MTBF|(Please refer to application-note.)|
|Environment|- Vibration|IEC 60068-2-6|
|||5 g, 3 axis, sine sweep, 60-500 Hz|
||- Mechanical Shock|IEC 60068-2-27|
|||50g,3 axis,half sine,11 ms|
|Case Ingress Protection||IP 67(acc. IEC 60529)|
|HousingMaterial||Plastic(UL 94 V-0 rated)|
|Potting Material||Epoxy(UL 94 V-0 rated) (variant 1)|
|||Polyurethane(UL 94 V-2 rated) (variant 2)|
|HousingType||Plastic Case|
|MountingType||Chassis Mount|
|Connection Type||FlyingLeads|
|Weight||80 g|



All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. 

**Page 3 / 4** 

**November 30, 2022** 

**www.tracopower.com** 

**TIW 12 Series, 12 Watt** 

Environmental Compliance 

- REACH Declaration 

- RoHS Declaration 

www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I 

(RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) 

## **Supporting Documents** 

Overview Link (for additional Documents) 

www.tracopower.com/overview/tiw12 

## **Outline Dimensions** 

**==> picture [219 x 372] intentionally omitted <==**

**----- Start of picture text -----**<br>
50.2<br>(1.98)<br>3.2<br>(0.13)<br>3.2<br>(0.13)<br>12.5 12.5<br>Flat 2-core cable<br>Outer insulation: (0.49) (0.49)<br>3.5x7.0 typ. (0.14x0.28 typ.)<br>Bottom View<br>4.0<br>(0.16)<br>1  2<br>Input<br>Top View<br>Output<br>4  3<br>4.0<br>(0.16) 23.6<br>(0.93)<br>Side View<br>Dimensions in mm (inch)<br>5.7<br>Tolerances: x.x ±0.2 (±0.008)<br>(0.22)<br>(1.08)<br>(2.17)<br>27.5<br>55.0<br>8.0 (0.32) 5.<br>0<br>40.0 (1.58) 2 (0.81)<br>) 05.<br>2 (0.81)<br>+30/–0(<br>(22.44 (+1.2–0)<br>570.0<br>48.0 (1.89)<br>200 +20/-0 (7.87 +0.79/-0)<br>5.0 ±2 (0.2 ±0.07)<br>**----- End of picture text -----**<br>


|Pinout<br><br><br><br>|Pinout<br><br><br><br>|Pinout<br><br><br><br>|Pinout<br><br><br><br>|
|---|---|---|---|
|Pin<br>1|Function<br>AC (N)|Color<br>White|Type<br>18AWG / 0.82mm2|
|2|AC (L)|Black|18AWG / 0.82mm2|
|3|- Vout|Black|20AWG / 0.52mm2|
|4|+ Vout|Red|20AWG / 0.52mm2|



©   Copyright 2022 Traco Electronic AG 

Specifications can be changed without notice. 

Rev. November 30, 2022 

www.tracopower.com 

**Page 4 / 4**