Image not available
Illustrative purposes only
TGR-24V-312W
LED Driver, 320 W, 24 VDC, 13 A, Constant Voltage, 120 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: TIGER POWER SUPPLIES
- Product type: AC / DC LED Power Supplies
- SVHC: To Be Advised
- Product Range: Tiger Power Supplies - LED Drivers
- Output Current: 13A
- LED Driver Mode: Constant Voltage
- Output Power Max: 320W
- Input Voltage Max: 277V
- Input Voltage Min: 120V
- Output Voltage Max: 24VDC
- Power Supply Applications: -
| Delivery and price | |
|---|---|
| Units per pack | 3 |
| Price | 91.88 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
312W LED Driver Series ## TGR-XXX-312W ## ■ **Features** ## **M M 110 SELV 05** ~~O~~ VVV7 767 &@© ® We & CBHHICE ■ ‧ Wide input range 100~305VAC(class_) Ⅰ ‧ Full ‧Metal ‧ ‧ ‧Protection Functions:OLP/SCP/OVP/OTP ‧ ## ■ **Description** **TGR-XXX-312W series is a 312W LED AC/DC driver. These units operate** **from 120~305VAC and features models with different current ratings ranging between 1050mA and 7420mA as well as a constant voltage 12V / 24V unit which can be adjusted to provide either a 12V or 24V output using the small pot on the underside of the casing. The range provides high efficiency up to 94% as well as a fanless design.** **Metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. The series adaptive capability allows the range to reliably light LEDs for all kinds of application and environments in almost any spot that may require LEDs installed in the world. Compliant** **with the latest version of IEC61347/GB7000.1-2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations and isolation to ensure the safety of both user and luminaire system during installation.** ## TIGER POWER PRODUCTS – QUALITY & RELIABILITY This specification is not for general release or circulation. Tiger Power reserves the right to make changes to spec. or product without notice or liability. Tiger Products Limited t/a Tiger Power Supplies, Henley-On-Thames, RG9 1UY, UK, T: (0) 1491 522 711 E: info@TigerPowerSupplies.com TGR-XXX-312W 312W LED Driver Series |Voltage Dips and Interruptions<br>BS EN/EN61000-4-11<br>>95% dip 0.5 periods, 30% dip 25 periods,<br>>95% interruptions 250 periods<br>Magnetic Field<br>BS EN/EN61000-4-8<br>Level 4<br>Conducted<br>BS EN/EN61000-4-6<br>Level 2<br>EFT / Burst<br>BS EN/EN61000-4-4<br>Level 3<br>ESD<br>BS EN/EN61000-4-2<br>Level 3, 8KV air ; Level 2, 4KV contact<br>**Parameter**<br>**Standard**<br>**Test Level / Note**<br>Voltage Flicker<br>BS EN/EN61000-3-3<br>-----<br>Harmonic Current<br>Class C @load≥50%<br>BS EN/EN61000-3-2 , GB/T17625.1<br>Conducted<br>-----<br>BS EN/EN55015(CISPR15) ,GB/T17743<br>**LINE REGULATION**<br>±0.5%<br>NC<br>NC<br>NC<br>**VOLTAGE TOLERANCE**<br>±3%<br>NC<br>NC<br>NC<br>**RIPPLE & NOISE(max.)**<br>NC<br>NC<br>NC<br>240mV p-p<br>**CURRENT TOLERANCE**<br>±5%<br>±5%<br>±5%<br>NC<br>**CURRENT RIPPLE**<br>5.0% max. @rated current<br>5.0 max. @rated current<br>5.0% max. @rated current<br>NC<br>**OPEN CIRCUIT VOLTAGE (max.)**<br>340V<br>180V<br>60V<br>NC<br>TGR-140-312W (**L**type)<br>TGR-280-312W (**M**type)<br>TGR-560-312W (H type)<br>TGR-24V-312W (also 12V OP)**-**<br>**MODEL**<br>**DEFAULT CURRENT**<br>1400mA<br>2800mA<br>5600mA<br>13A/24V<br>**RATED POWERNote.10**315W<br>310.8W<br>312W<br>24V/312W, 12V/216W<br>**FULL POWER CURRENT RANGE**<br>1050~1400mA<br>2100~2800mA<br>5570~7420mA<br>13~18A(24V/13A,12V/18A)<br>**OUTPUT**<br>**CURRENT ADJ. RANGE**<br>500~1400mA<br>1050~2800mA<br>2800~7420mA<br>NC<br>**VOLTAGE RANGENote.2**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURENote.11**<br>47 ~ 63Hz<br>3A / 120VAC 1.6A / 230VAC 1.3A / 277VAC<br><0.75mA / 277VAC<br>20 ~ 95% RH non-condensing<br>-40 ~ +80℃, 10 ~ 95% RH non-condensing<br>1476.4K hrs min. Telcordia SR-332(Bellcore) ; 168.1 K hrs min. MIL-HDBK-217F (25℃)<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>**SHORT CIRCUIT**<br>**EFFICIENCY (Typ.)**<br>94.5%<br>93.5%<br>92.5%<br>93%<br>COLD START 45A(twidth=1200 s measured at 50% Ipeak) at 230VAC;<br>μ<br> Per NEMA 410<br>**TOTAL HARMONIC DISTORTION**<br>**CONSTANT CURRENT REGION**<br>150~300V<br>74 ~ 148V<br>30 ~ 56V<br>NC<br>**PACKING**<br>1.45Kg;9pcs/14Kg/0.76CUFT<br>**NOTE**<br>**MAX. NO.** **of** **PSUs** **on** **16A**<br>**CIRCUIT** **BREAKER**<br>2 unit(circuit breaker of type B) / 4 units(circuit breaker of type C) at 230VAC<br>Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed<br>L/M/H-Type: Tcase>85℃±5℃,derate power automatically<br>V-Type: Shut down output voltage, re-power on to recover<br>100 ~ 305VAC 142VDC ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" ang “ DRIVING METHODS OF LED MODULE"section)<br>350 ~ 380V<br>190 ~ 220V<br>63 ~ 78V<br>27 ~ 34V<br>Shut down output voltage, re-power on to recovery<br>**TEMP. COEFFICIENT**<br>±0.03%/℃(0 ~ 60℃)<br>1.<br>2.<br>3.<br>4.<br>5.<br>6.<br>TIGER POWER<br>www.TigerPowerSupplies.com<br>7.<br>8.<br>9.<br>10.<br>11.<br>12.<br>13.<br>14.<br>15.<br>16.<br>**WORKING TEMP.**<br>Tcase=-40 ~ +85℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>**MAX. CASE TEMP.**<br>Tcase=+85℃<br>PF<br>0.98 / 115VAC, PF<br>0.95 / 230VAC<br>full load<br>≧<br>≧<br>, PF≧0.92 / 277VAC at<br>(Please refer to "<br>"<br>)<br>Power Factor Characteristic section<br>THD< 10% @ load≧50% at 115VAC/230VAC, THD<15%@Load>75% at 277VAC;<br>Please refer to “TOTAL HARMONIC DISTORTION (THD)” section<br>**STANDBY POWER**<br>**CONSUMPTIONNote.5**<br>Standby power consumption <0.5W for AB-Type(Dimming OFF)<br>246*77*39.5mm (L*W*H)<br>**OVER LOADNote.10**<br>**SET UP TIME**<br>**Note.9**<br>500ms/230VAC, 1200ms/115VAC<br>108~135%(only for V-type)<br>Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed<br>**SAFETY STANDARDS**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH<br>UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384;<br>GB19510.1, GB19510.14;EAC TP TC 004; IP67 approved<br>BS EN/EN61547<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**RISE TIME,HOLD UP TIME (Typ.)**<br>160ms,10ms/230VAC/115VAC(only for V-type)<br>**Parameter**<br>**Standard**<br>**Test Level / Note**<br>Radiated<br>BS EN/EN55015(CISPR15),GB/T17743<br>-----<br>Radiated<br>BS EN/EN61000-4-3<br>Level 2<br>Surge<br>BS EN/EN61000-4-5<br>4KV/Line-Line 6KV/Line-Earth<br>**OUTPUT VOLTAGE ADJ. RANGE**<br>NC<br>NC<br>NC<br>24V or 12V<br>**VIBRATION**<br>10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes<br>**LOAD REGULATION**<br>±2%<br>NC<br>NC<br>NC<br>This specification is not for general release<br>or circulation. Tiger Power reserves the<br>right to make changes to spec. or product<br>without notice or liability.<br>~~S=~~<br>All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25<br>ambient temperature.<br>De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation,<br>the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>Thisseries meetsthetypical lifeexpectancy>50,000 hoursofoperationwhen Tcase, particularly @o)point (orTMP, per DLC), is70 _ less.<br>To<br>fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.<br>Please refer to the warranty statement on<br>website at<br>The ambient temperature derating of 3.5<br>00m with fanless models and of<br>5<br>00m with fan models for operating altitude higher than 2000m(6500ft).<br>For any application note and IP water proof function installation caution, please refer our user manual before using.<br>Products sourced from the Americas regions may not have the ENEC/CCC/KC logo. Please contact sales for more information.<br>The output voltage of the V Type default is 24V, for 12V output, please adjust SVR by clockwise direction to the end, otherwise the OLP point is not within the specification range.<br>When the secondary OTP fails, there is also a primary OTP, which is protected by Shut down output voltage, re-power on to recovery for the H/M/L-type.<br>When the current adjustment is more than 110% of the rated current, it will be enter the Protection state.<br>It may has an over-shoot status at output current whenAC On/Off operate with lower Vf and lower loading conditions.<br>If you need the NOM (Mexico) certificate, Please contact sales representative for details.<br>Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>Please refer to "DRIVING METHODS OF LED MODULE".|Voltage Dips and Interruptions<br>BS EN/EN61000-4-11<br>>95% dip 0.5 periods, 30% dip 25 periods,<br>>95% interruptions 250 periods<br>Magnetic Field<br>BS EN/EN61000-4-8<br>Level 4<br>Conducted<br>BS EN/EN61000-4-6<br>Level 2<br>EFT / Burst<br>BS EN/EN61000-4-4<br>Level 3<br>ESD<br>BS EN/EN61000-4-2<br>Level 3, 8KV air ; Level 2, 4KV contact<br>**Parameter**<br>**Standard**<br>**Test Level / Note**<br>Voltage Flicker<br>BS EN/EN61000-3-3<br>-----<br>Harmonic Current<br>Class C @load≥50%<br>BS EN/EN61000-3-2 , GB/T17625.1<br>Conducted<br>-----<br>BS EN/EN55015(CISPR15) ,GB/T17743<br>**LINE REGULATION**<br>±0.5%<br>NC<br>NC<br>NC<br>**VOLTAGE TOLERANCE**<br>±3%<br>NC<br>NC<br>NC<br>**RIPPLE & NOISE(max.)**<br>NC<br>NC<br>NC<br>240mV p-p<br>**CURRENT TOLERANCE**<br>±5%<br>±5%<br>±5%<br>NC<br>**CURRENT RIPPLE**<br>5.0% max. @rated current<br>5.0 max. @rated current<br>5.0% max. @rated current<br>NC<br>**OPEN CIRCUIT VOLTAGE (max.)**<br>340V<br>180V<br>60V<br>NC<br>TGR-140-312W (**L**type)<br>TGR-280-312W (**M**type)<br>TGR-560-312W (H type)<br>TGR-24V-312W (also 12V OP)**-**<br>**MODEL**<br>**DEFAULT CURRENT**<br>1400mA<br>2800mA<br>5600mA<br>13A/24V<br>**RATED POWERNote.10**315W<br>310.8W<br>312W<br>24V/312W, 12V/216W<br>**FULL POWER CURRENT RANGE**<br>1050~1400mA<br>2100~2800mA<br>5570~7420mA<br>13~18A(24V/13A,12V/18A)<br>**OUTPUT**<br>**CURRENT ADJ. RANGE**<br>500~1400mA<br>1050~2800mA<br>2800~7420mA<br>NC<br>**VOLTAGE RANGENote.2**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**AC CURRENT (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURENote.11**<br>47 ~ 63Hz<br>3A / 120VAC 1.6A / 230VAC 1.3A / 277VAC<br><0.75mA / 277VAC<br>20 ~ 95% RH non-condensing<br>-40 ~ +80℃, 10 ~ 95% RH non-condensing<br>1476.4K hrs min. Telcordia SR-332(Bellcore) ; 168.1 K hrs min. MIL-HDBK-217F (25℃)<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>**SHORT CIRCUIT**<br>**EFFICIENCY (Typ.)**<br>94.5%<br>93.5%<br>92.5%<br>93%<br>COLD START 45A(twidth=1200 s measured at 50% Ipeak) at 230VAC;<br>μ<br> Per NEMA 410<br>**TOTAL HARMONIC DISTORTION**<br>**CONSTANT CURRENT REGION**<br>150~300V<br>74 ~ 148V<br>30 ~ 56V<br>NC<br>**PACKING**<br>1.45Kg;9pcs/14Kg/0.76CUFT<br>**NOTE**<br>**MAX. NO.** **of** **PSUs** **on** **16A**<br>**CIRCUIT** **BREAKER**<br>2 unit(circuit breaker of type B) / 4 units(circuit breaker of type C) at 230VAC<br>Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed<br>L/M/H-Type: Tcase>85℃±5℃,derate power automatically<br>V-Type: Shut down output voltage, re-power on to recover<br>100 ~ 305VAC 142VDC ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" ang “ DRIVING METHODS OF LED MODULE"section)<br>350 ~ 380V<br>190 ~ 220V<br>63 ~ 78V<br>27 ~ 34V<br>Shut down output voltage, re-power on to recovery<br>**TEMP. COEFFICIENT**<br>±0.03%/℃(0 ~ 60℃)<br>1.<br>2.<br>3.<br>4.<br>5.<br>6.<br>TIGER POWER<br>www.TigerPowerSupplies.com<br>7.<br>8.<br>9.<br>10.<br>11.<br>12.<br>13.<br>14.<br>15.<br>16.<br>**WORKING TEMP.**<br>Tcase=-40 ~ +85℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)<br>**MAX. CASE TEMP.**<br>Tcase=+85℃<br>PF<br>0.98 / 115VAC, PF<br>0.95 / 230VAC<br>full load<br>≧<br>≧<br>, PF≧0.92 / 277VAC at<br>(Please refer to "<br>"<br>)<br>Power Factor Characteristic section<br>THD< 10% @ load≧50% at 115VAC/230VAC, THD<15%@Load>75% at 277VAC;<br>Please refer to “TOTAL HARMONIC DISTORTION (THD)” section<br>**STANDBY POWER**<br>**CONSUMPTIONNote.5**<br>Standby power consumption <0.5W for AB-Type(Dimming OFF)<br>246*77*39.5mm (L*W*H)<br>**OVER LOADNote.10**<br>**SET UP TIME**<br>**Note.9**<br>500ms/230VAC, 1200ms/115VAC<br>108~135%(only for V-type)<br>Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed<br>**SAFETY STANDARDS**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH<br>UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384;<br>GB19510.1, GB19510.14;EAC TP TC 004; IP67 approved<br>BS EN/EN61547<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**RISE TIME,HOLD UP TIME (Typ.)**<br>160ms,10ms/230VAC/115VAC(only for V-type)<br>**Parameter**<br>**Standard**<br>**Test Level / Note**<br>Radiated<br>BS EN/EN55015(CISPR15),GB/T17743<br>-----<br>Radiated<br>BS EN/EN61000-4-3<br>Level 2<br>Surge<br>BS EN/EN61000-4-5<br>4KV/Line-Line 6KV/Line-Earth<br>**OUTPUT VOLTAGE ADJ. RANGE**<br>NC<br>NC<br>NC<br>24V or 12V<br>**VIBRATION**<br>10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes<br>**LOAD REGULATION**<br>±2%<br>NC<br>NC<br>NC<br>This specification is not for general release<br>or circulation. Tiger Power reserves the<br>right to make changes to spec. or product<br>without notice or liability.<br>~~S=~~<br>All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25<br>ambient temperature.<br>De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation,<br>the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>Thisseries meetsthetypical lifeexpectancy>50,000 hoursofoperationwhen Tcase, particularly @o)point (orTMP, per DLC), is70 _ less.<br>To<br>fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.<br>Please refer to the warranty statement on<br>website at<br>The ambient temperature derating of 3.5<br>00m with fanless models and of<br>5<br>00m with fan models for operating altitude higher than 2000m(6500ft).<br>For any application note and IP water proof function installation caution, please refer our user manual before using.<br>Products sourced from the Americas regions may not have the ENEC/CCC/KC logo. Please contact sales for more information.<br>The output voltage of the V Type default is 24V, for 12V output, please adjust SVR by clockwise direction to the end, otherwise the OLP point is not within the specification range.<br>When the secondary OTP fails, there is also a primary OTP, which is protected by Shut down output voltage, re-power on to recovery for the H/M/L-type.<br>When the current adjustment is more than 110% of the rated current, it will be enter the Protection state.<br>It may has an over-shoot status at output current whenAC On/Off operate with lower Vf and lower loading conditions.<br>If you need the NOM (Mexico) certificate, Please contact sales representative for details.<br>Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>Please refer to "DRIVING METHODS OF LED MODULE".|TGR-140-312W (**L**type)|TGR-280-312W (**M**type)|TGR-280-312W (**M**type)|TGR-560-312W (H type)|TGR-560-312W (H type)|TGR-24V-312W (also 12V OP)**-**| |---|---|---|---|---|---|---|---| ||**DEFAULT CURRENT**|1400mA|2800mA||5600mA||13A/24V| ||**RATED POWERNote.10**|315W|310.8W||312W||24V/312W, 12V/216W| ||**CONSTANT CURRENT REGION**|150~300V|74 ~ 148V||30 ~ 56V||NC| ||**OUTPUT VOLTAGE ADJ. RANGE**|NC|NC||NC||24V or 12V| ||**FULL POWER CURRENT RANGE**|1050~1400mA|2100~2800mA||5570~7420mA||13~18A(24V/13A,12V/18A)| ||**OPEN CIRCUIT VOLTAGE (max.)**|340V|180V||60V||NC| ||**CURRENT ADJ. RANGE**|500~1400mA|1050~2800mA||2800~7420mA||NC| ||**CURRENT RIPPLE**|5.0% max. @rated current|5.0 max. @rated current||5.0% max. @rated current||NC| ||**CURRENT TOLERANCE**|±5%|±5%||±5%||NC| ||**RIPPLE & NOISE(max.)**|NC|NC||NC||240mV p-p| ||**VOLTAGE TOLERANCE**|NC|NC||NC||±3%| ||**LINE REGULATION**|NC|NC||NC||±0.5%| ||**LOAD REGULATION**|NC|NC||NC||±2%| ||**SET UP TIME**<br>**Note.9**|500ms/230VAC, 1200ms/115VAC|||||| ||**RISE TIME,HOLD UP TIME (Typ.)**|160ms,10ms/230VAC/115VAC(only for V-type)|||||| ||**VOLTAGE RANGENote.2**|100 ~ 305VAC 142VDC ~ 431VDC<br>(Please refer to "STATIC CHARACTERISTIC" ang “ DRIVING METHODS OF LED MODULE"section)|||||| ||**FREQUENCY RANGE**|47 ~ 63Hz|||||| ||**POWER FACTOR (Typ.)**|PF<br>0.98 / 115VAC, PF<br>0.95 / 230VAC<br>full load<br>≧<br>≧<br>, PF≧0.92 / 277VAC at<br>(Please refer to "<br>"<br>)<br>Power Factor Characteristic section|||||| ||**TOTAL HARMONIC DISTORTION**|THD< 10% @ load≧50% at 115VAC/230VAC, THD<15%@Load>75% at 277VAC;<br>Please refer to “TOTAL HARMONIC DISTORTION (THD)” section|||||| ||**EFFICIENCY (Typ.)**|94.5%|93.5%||92.5%||93%| ||**AC CURRENT (Typ.)**|3A / 120VAC 1.6A / 230VAC 1.3A / 277VAC|||||| ||**INRUSH CURRENT(Typ.)**|COLD START 45A(twidth=1200 s measured at 50% Ipeak) at 230VAC;<br>μ<br> Per NEMA 410|||||| ||**MAX. NO.** **of** **PSUs** **on** **16A**<br>**CIRCUIT** **BREAKER**|2 unit(circuit breaker of type B) / 4 units(circuit breaker of type C) at 230VAC|||||| ||**LEAKAGE CURRENT**|<0.75mA / 277VAC|||||| ||**STANDBY POWER**<br>**CONSUMPTIONNote.5**|Standby power consumption <0.5W for AB-Type(Dimming OFF)|||||| ||**SHORT CIRCUIT**|Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed|||||| ||**OVER VOLTAGE**|350 ~ 380V<br>190 ~ 220V<br>63 ~ 78V<br>27 ~ 34V<br>Shut down output voltage, re-power on to recovery|||||| ||**OVER TEMPERATURENote.11**|L/M/H-Type: Tcase>85℃±5℃,derate power automatically<br>V-Type: Shut down output voltage, re-power on to recover|||||| ||**OVER LOADNote.10**|108~135%(only for V-type)<br>Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed|||||| ||**WORKING TEMP.**|Tcase=-40 ~ +85℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section)|||||| ||**MAX. CASE TEMP.**|Tcase=+85℃|||||| ||**WORKING HUMIDITY**|20 ~ 95% RH non-condensing|||||| ||**STORAGE TEMP., HUMIDITY**|-40 ~ +80℃, 10 ~ 95% RH non-condensing|||||| ||**TEMP. COEFFICIENT**|±0.03%/℃(0 ~ 60℃)|||||| ||**VIBRATION**|10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes|||||| ||**SAFETY STANDARDS**<br>~~S=~~|UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384;<br>GB19510.1, GB19510.14;EAC TP TC 004; IP67 approved<br>~~S=~~|||||| ||**WITHSTAND VOLTAGE**<br>~~S=~~|I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC<br>~~S=~~|||||| ||**ISOLATION RESISTANCE**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>~~S=~~|I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH<br>~~S=~~|||||| |||**Parameter**<br>~~S=~~||**Standard**<br>~~S=~~||**Test Level / Note**<br>~~S=~~|| |||Conducted<br>~~S=~~||BS EN/EN55015(CISPR15) ,GB/T17743<br>~~S=~~||-----<br>~~S=~~|| |||Radiated<br>~~S=~~||BS EN/EN55015(CISPR15),GB/T17743<br>~~S=~~||-----<br>~~S=~~|| |||Harmonic Current<br>~~S=~~||BS EN/EN61000-3-2 , GB/T17625.1<br>~~S=~~||Class C @load≥50%<br>~~S=~~|| |||Voltage Flicker<br>~~S=~~||BS EN/EN61000-3-3<br>~~S=~~||-----<br>~~S=~~|| |||BS EN/EN61547<br>~~S=~~|||||| |||**Parameter**<br>~~S=~~||**Standard**<br>~~S=~~||**Test Level / Note**<br>~~S=~~|| |||ESD<br>~~S=~~||BS EN/EN61000-4-2<br>~~S=~~||Level 3, 8KV air ; Level 2, 4KV contact<br>~~S=~~|| |||Radiated<br>~~S=~~||BS EN/EN61000-4-3<br>~~S=~~||Level 2<br>~~S=~~|| |||EFT / Burst<br>~~S=~~||BS EN/EN61000-4-4<br>~~S=~~||Level 3<br>~~S=~~|| |||Surge<br>~~S=~~||BS EN/EN61000-4-5<br>~~S=~~||4KV/Line-Line 6KV/Line-Earth<br>~~S=~~|| |||Conducted<br>~~S=~~||BS EN/EN61000-4-6<br>~~S=~~||Level 2<br>~~S=~~|| |||Magnetic Field<br>~~S=~~||BS EN/EN61000-4-8<br>~~S=~~||Level 4<br>~~S=~~|| |||Voltage Dips and Interruptions<br>~~S=~~||BS EN/EN61000-4-11<br>~~S=~~||>95% dip 0.5 periods, 30% dip 25 periods,<br>>95% interruptions 250 periods<br>~~S=~~|| ||**MTBF**<br>~~S=~~|1476.4K hrs min. Telcordia SR-332(Bellcore) ; 168.1 K hrs min. MIL-HDBK-217F (25℃)<br>~~S=~~|||||| ||**DIMENSION**|246*77*39.5mm (L*W*H)|||||| ||**PACKING**|1.45Kg;9pcs/14Kg/0.76CUFT|||||| ||1.<br>2.<br>3.<br>4.<br>5.<br>6.<br>TIGER POWER<br>www.TigerPowerSupplies.com<br>7.<br>8.<br>9.<br>10.<br>11.<br>12.<br>13.<br>14.<br>15.<br>16.<br>This specification is not for general release<br>or circulation. Tiger Power reserves the<br>right to make changes to spec. or product<br>without notice or liability.<br>All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25<br>ambient temperature.<br>De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation,<br>the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>Thisseries meetsthetypical lifeexpectancy>50,000 hoursofoperationwhen Tcase, particularly @o)point (orTMP, per DLC), is70 _ less.<br>To<br>fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.<br>Please refer to the warranty statement on<br>website at<br>The ambient temperature derating of 3.5<br>00m with fanless models and of<br>5<br>00m with fan models for operating altitude higher than 2000m(6500ft).<br>For any application note and IP water proof function installation caution, please refer our user manual before using.<br>Products sourced from the Americas regions may not have the ENEC/CCC/KC logo. Please contact sales for more information.<br>The output voltage of the V Type default is 24V, for 12V output, please adjust SVR by clockwise direction to the end, otherwise the OLP point is not within the specification range.<br>When the secondary OTP fails, there is also a primary OTP, which is protected by Shut down output voltage, re-power on to recovery for the H/M/L-type.<br>When the current adjustment is more than 110% of the rated current, it will be enter the Protection state.<br>It may has an over-shoot status at output current whenAC On/Off operate with lower Vf and lower loading conditions.<br>If you need the NOM (Mexico) certificate, Please contact sales representative for details.<br>Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>Please refer to "DRIVING METHODS OF LED MODULE".||||||| 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. This specification is not for general release or circulation. Tiger Power reserves the right to make changes to spec. or product without notice or liability. Tiger Products Limited t/a Tiger Power Supplies, Henley-On-Thames, RG9 1UY, UK, T: (0) 1491 522 711 E: info@TigerPowerSupplies.com ## 312W LED Driver Series ## TGR-XXX-312W ## **BLOCK DIAGRAM** **==> picture [485 x 629] intentionally omitted <==** **----- Start of picture text -----**<br> PFC fosc : 45KHz<br>PWM fosc : 100KHz<br>EMI FILTER PFC POWER RECTIFIERS +V<br>I/P & CIRCUIT SWITCHING & -V<br>RECTIFIERS FILTER<br>O.C.P.<br>O.T.P. DIM+<br>DIM-<br>FG PFC O.L.P. PWM DETECTION (AB Type)<br>CONTROL CONTROL CIRCUIT<br>O.T.P.<br>— $ C e<br>O.V.P.<br>—_<br>DRIVING METHODS OF LED MODULE<br>◎ TYPE L ◎ TYPE M<br>320V 160V<br>300V 500mA, 300V 1050mA, 300V 1050mA, 148V 2100mA, 148V<br>280V 140V<br>260V<br>240V 120V 2800mA, 111V<br>1400mA, 223V<br>220V<br>200V 100V<br>180V<br>160V 80V<br>1050mA, 150V 1400mA, 150V<br>140V 2100mA, 74V 2800mA, 74V<br>120V 60V<br>0mA 300mA 600mA 900mA 1200mA 1500mA 1800mA 0mA 500mA 1000mA 1500mA 2000mA 2500mA 3000mA<br>◎ TYPE H ◎ TYPE 24V (&12V)<br>60V 13A, 24V<br>2800mA, 56V 5570mA, 56V 24V<br>55V<br>21V<br>50V<br>45V 7420mA, 42V 18V<br>40V 15V<br>35V<br>12V<br>30V 5570mA, 30V 18A, 12V<br>7420mA, 30V 9V<br>25V<br>20V 6V<br>0A 3A 6A 9A 12A 15A 18A 21A 24A<br>0mA 2000mA 4000mA 6000mA 8000mA<br>※ V type output voltage adjustable via biult-in potentiometer<br>This specification is not for general release<br>TIGER POWER PRODUCTS – QUALITY & RELIABILITY or circulation. Tiger Power reserves the<br>right to make changes to spec. or product<br>without notice or liability.<br>**----- End of picture text -----**<br> Tiger Products Limited t/a Tiger Power Supplies, Henley-On-Thames, RG9 1UY, UK, T: (0) 1491 522 711 E: info@TigerPowerSupplies.com 312W LED Driver Series ## TGR-XXX-312W **==> picture [492 x 666] intentionally omitted <==** **----- Start of picture text -----**<br> DIMMING OPERATION<br>DIM+(Purple)*<br>AC/N(Blue) DIM-(Pink)**<br>AC/L(Brown) Vo-(Black)<br>FG (Green/Yellow) Vo+(Red)<br> * DIM+ for AB Type<br>* *DIM- for AB Type<br>※ 3 in 1 dimming function ( contact sales)<br>‧Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:<br>0 ~ 10VDC, or 10V PWM signal or resistance.<br>‧Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.<br>‧Dimming source current from power supply: 100μA (typ.)<br>◎ Applying additive 0 ~ 10VDC 100%<br>90%<br>80%<br>+<br>Vo+ + 70%<br>60%<br>-<br>Vo- - 50%<br>DIM+ 40%<br>+<br>Additive Voltage 30%<br>- 20%<br>DIM-<br>10%<br>“DO NOT connect "DIM- to Vo-" 0%<br>0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V<br>Dimming input: Additive voltage<br>◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100%<br>90%<br>80%<br>+<br>Vo+ + 70%<br>60%<br>-<br>Vo- - 50%<br>DIM+ 40%<br>Additive PWM signal 30%<br>20%<br>DIM- @ il l<br>10%<br>“DO NOT connect "DIM- to Vo-" 0%<br>0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>Duty cycle of additive 10V PWM signal dimming input<br>◎ Applying additive resistance: 100%<br>90%<br>Vo+ + + 80%<br>70%<br>-<br>Vo- - 60%<br>DIM+ 50%<br>40%<br>Additive Resistance<br>30%<br>DIM- 20%<br>“DO NOT connect "DIM- to Vo-" 10%<br>0%<br>Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N<br>(N=driver quantity for synchronized dimming operation)<br>Dimming input: Additive resistance<br>Output current (%)<br>Output current (%)<br>Output current (%)<br>**----- End of picture text -----**<br> Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%. 2. The output current could drop down to 0% when dimming input is about 0Ωor 0Vdc, or 10V PWM signal with 0% duty cycle. 3. When PWM frequency >2K HZ ,the lighting will be triggered at 10~15% PWM duty . Tiger Products Limited t/a Tiger Power Supplies, Henley-On-Thames, RG9 1UY, UK, T: (0) 1491 522 711 E: info@TigerPowerSupplies.com 312W LED Driver Series TGR-XXX-312W **==> picture [486 x 639] intentionally omitted <==** **----- Start of picture text -----**<br> OUTPUT LOAD vs TEMPERATURE<br>100 100<br>95<br>230VAC<br>80 80<br>230VAC Input only 230VAC<br>Input only Input only<br>120VAC<br>60 Input only 60<br>40 40<br>20 20<br>-40 ne -30 -10 0 15 30 35 40 45 50 60 (HORIZONTAL) -40 -30 0 10 30 50 70 85 (HORIZONTAL)<br>AMBIENT TEMPERATURE,Ta ( ℃ ) Tcase ( ℃ )<br>| STATIC CHARACTERISTIC | POWER FACTOR (PF) CHARACTERISTIC<br>※ Tcase at 85℃<br>Constant Current Mode<br>100<br>90<br>1<br>80 0.95<br>0.9<br>70<br>0.85<br>120VAC<br>60 0.8<br>230VAC<br>0.75<br>50 0.7 277VAC<br>40 0.65<br>0.6<br>50% 60% 70% 80% 90% 100%<br>100 120 140 160 180 200 220 240 260 280 305<br>INPUT VOLTAGE (V) 60Hz LOAD<br>TOTAL HARMONIC DISTORTION (THD) | EFFICIENCY vs LOAD<br>TGR-XXX-312W series possess superior working efficiency that up to 94.5%<br>can be reached in field applications.<br>※ TYPE L Tcase at 85℃<br>96<br>14 94<br>12 92<br>10 90<br>120VAC<br>8 120VAC 88<br>230VAC<br>6 230VAC 86<br>277VAC<br>4 277VAC 84<br>2 82<br>0 80<br>50% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100%<br>TIGER POWER PRODUCTS – QUALITY & RELIABILITY LOAD<br>LOAD (%) LOAD (%)<br>PF<br>LOAD (%)<br>THD(%)<br>EFFICIENCY(%)<br>**----- End of picture text -----**<br> Tiger Products Limited t/a Tiger Power Supplies, Henley-On-Thames, RG9 1UY, UK, T: (0) 1491 522 711 E: info@TigerPowerSupplies.com 312W LED Driver Series ## TGR-XXX-312W ## **LIFE TIME** **==> picture [310 x 143] intentionally omitted <==** **----- Start of picture text -----**<br> 120<br>100<br>Pt tt tT [T][t]<br>80<br>PTT TTT T [P] e [EN]<br>60<br>pt tT | EE TE TT [TN]<br>40<br>ptt TTT et [TER]<br>20<br>Pt tt} tt tT tT TT<br>SERRE<br>0<br>25 30 35 40 45 50 55 60 65 70 75 80 85<br>(Kh)<br>LIFETIME<br>**----- End of picture text -----**<br> **==> picture [18 x 7] intentionally omitted <==** **----- Start of picture text -----**<br> Tcase<br>**----- End of picture text -----**<br> TIGER POWER PRODUCTS – QUALITY & RELIABILITY This specification is not for general release or circulation. Tiger Power reserves the right to make changes to spec. or product without notice or liability. Tiger Products Limited t/a Tiger Power Supplies, Henley-On-Thames, RG9 1UY, UK, T: (0) 1491 522 711 E: info@TigerPowerSupplies.com ## 312W LED Driver Series ## TGR-XXX-312W ## **MECHANICAL SPECIFICATION** **==> picture [483 x 618] intentionally omitted <==** **----- Start of picture text -----**<br> ※ TGR-24V-312W<br>246<br>235<br>300±20 7 222 300±20<br>a<br>AC/N(Blue)<br>AC/L(Brown) tc 86 Vo+(Red)Vo-(Black)<br>FG © (Green/Yellow) —————d &H05RN-F 3SJOW 17AWGx3C×1.0mm2 a m eal C) i SJOW 14AWGx2C KXXSO<br>4-ψ4.5<br>‧ O : Max. Case Temperaturetc<br>Note. 10<br>Os<br>47.5<br>※ H/L/M-A-Type<br>246<br>235<br>300±20 —_ 222 300±20<br>AC/N(Blue)<br>AC/L(Brown) tc 86 Vo+(Red)Vo-(Black)<br>FG © (Green/Yellow) eooea ea &H05RN-F 3SJOW 17AWGx3C×1.0mm2 a’al C) 5i SOOW 17AWGSJOW 17AWGxx2C&05RN-F 22C&H07RN-F 1.0mm BOO KXXX ×1.0mm²² for L-type for H/M-type<br>4-ψ4.5<br>‧ O : Max. Case Temperaturetc<br>47.5<br>77 53.8<br>36<br>39.5<br>13.5<br>77 53.8<br>36<br>39.5<br>13.5<br>**----- End of picture text -----**<br> Tiger Products Limited t/a Tiger Power Supplies, Henley-On-Thames, RG9 1UY, UK, T: (0) 1491 522 711 E: info@TigerPowerSupplies.com ## 312W LED Driver Series ## TGR-XXX-312W ## **MECHANICAL SPECIFICATION** **==> picture [493 x 612] intentionally omitted <==** **----- Start of picture text -----**<br> ※ Dimming - AB-Type - Contact Sales<br>246<br>235<br>300±20 ———s| 222 320±20<br>UL2517 20AWGx2C<br>AC/N(Blue) DIM+(Purple)<br>AC/L(Brown)FG (Green/Yellow) SJOW 17AWGx3C tc 86 Vo-(Black)Vo+(Red) DIM-(Pink)<br>&H05RN-F 3×1.0mm2<br>4-ψ4.5 300±20<br>‧ O : Max. Case Temperaturetc SJOW 17AWGx2C&05RN-F 2SOOW 17AWGx2C&H07RN-F 1.0mm×1.0mm²² for L-type<br>47.5<br>This specification is not for general release<br>or circulation. Tiger Power reserves the<br>TIGER POWER PRODUCTS – QUALITY & RELIABILITY right to make changes to spec. or product<br>without notice or liability.<br>77 53.8<br>36<br>39.5<br>13.5<br>**----- End of picture text -----**<br> Tiger Products Limited t/a Tiger Power Supplies, Henley-On-Thames, RG9 1UY, UK, T: (0) 1491 522 711 E: info@TigerPowerSupplies.com
Updated at April 17, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →