TDR-240-48

AC/DC DIN Rail Power Supply (PSU), Laboratory Equipment, 1 Output, 240 W, 48 VDC, 5 A

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: MEAN WELL
Product type:
SVHC: No SVHC (25-Jun-2025)
Product Range: TDR-240 Series
No. of Outputs: 1 Output
Output Power Max: 240W
Current, Output 4: -
Input Voltage VAC: 340V AC to 550V AC
Power Supply Output Type: Adjustable, Fixed
Output Current - Output 1: 5A
Output Current - Output 2: -
Output Current - Output 3: -
Output Voltage - Output 1: 48VDC
Output Voltage - Output 2: -
Output Voltage - Output 3: -
Output Voltage - Output 4: -
Power Supply Applications: Laboratory Equipment
Delivery and price
Units per pack	10
Price	88.48 €
Current stock	10+
Lead time	30 days
Datasheet
> 240W Slim Three Phase Industrial DIN Rail with PFC Function **TDR - 240 series** 

BauarSicherheitbeegelodwacmat geprufto ges g @= ~~2)~~ **www.ID 2000000000tuv.com** UL6t010 1558 ■ 

**==> picture [13 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
■<br>**----- End of picture text -----**<br>


## ■ 

ψ 

℃ ℃ 

## ■ 

_File Name:TDR-240-SPEC   2020-01-04_ 

## 240W Slim Three Phase Industrial DIN Rail with PFC Function **TDR - 240 series** 

## **SPECIFICATION** 

|**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**OVER VOLTAGE CATEGORY**<br>**OPERATING ALTITUDE Note.6**<br>**WORKING TEMP.**<br>**Note.5**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>2000ms, 60ms/400VAC          1500ms, 60ms/500VAC at full load<br>20ms / 400VAC          40ms / 500VAC at full load<br>Three-Phase 340 ~ 550VAC (Dual phase operation possible<br>) or 480 ~ 780VDC<br>in connecting L1,L3,FG or L2,L3,FG<br>47 ~ 63Hz<br>92%<br>0.69A/400VAC          0.6A/500VAC<br>56 ~ 65V<br>92%<br>COLD START 50A<br><2mA / 530VAC<br>30 ~ 36V<br>Protection type : Constant current limiting, unit will hiccup after 3 sec.<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed.<br>Shut down o/p voltage, recovers automatically after temperature goes down<br>UL61010-1, UL61010-2-201,<br>EAC TP TC 004<br>EN61558-1, EN61558-2-16,<br>approved<br>-30 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃<br>0.05%/<br>(0 ~ 60<br>)<br>Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6<br>515.4K hrs min.<br>Telcordia SR-332(Bellcore); 215.6K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>63*125.2*113.5mm (W*H*D)<br>1Kg ; 12pcs/13Kg/1.06CUFT<br>**TDR-240-48**<br>48V<br>5A<br>0 ~ 5A<br>240W<br>120mVp-p<br>48 ~ 55V<br>±1.0%<br>±0.5%<br>±1.0%<br>**TDR-240-24**<br>24V<br>10A<br>0 ~ 10A<br>240W<br>100mVp-p<br>24 ~ 28V<br>±1.0%<br>±0.5%<br>±1.0%<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:4.87KVAC     I/P-FG:2.4KVAC     O/P-FG:0.5KVAC     O/P-DC OK:0.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note 7)**<br>**PROTECTION**<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>℃<br>℃<br>105 ~ 130% rated output power<br>Ⅲ; According to EN61558, EN50178, EN60664-1, EN62477-1, EN60204-1; altitude up to 2000 meters<br>5000 meters<br>**Parameter**<br>**Parameter**<br>ESD<br>Radiated  Field<br>EFT / Burst<br>Surge<br>Conducted<br>Magnetic Field<br>Voltage Dips and Interruptions<br>Conducted<br>Radiated<br>Harmonic Current<br>Voltage Flicker<br>**Standard**<br>**Standard**<br>EN55032(CISPR32)/EN61204-3<br>EN61000-3-2<br>EN61000-3-3<br>EN61000-4-2<br>EN61000-4-3<br>EN61000-4-4<br>EN61000-4-5<br>EN61000-4-6<br>EN61000-4-8<br>EN61000-4-11<br>**Test Level / Note**<br>**Test Level / Note**<br>Class B<br>Class B<br>Class A<br>-----<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>EN55024 , EN61204-3<br>Level 4, 15KV air ; Level 4, 8KV contact<br>Level 3<br>Level 3<br>Level 3<br>Level 4<br>＞95% dip 0.5 periods, 30% dip 25<br>periods<br>95% interruptions 250 periods<br>＞<br>Level 4, 2KV / Line-Line, Level 4, 4KV/ Line-Earth<br>**POWER FACTOR (Typ.)**<br>PF<br>0.53/400VAC          PF<br>0.52/500VAC at full load<br>≧<br>≧<br>EN55032(CISPR32)/EN61204-3<br>**DC OK REALY CONTACT RATINGS (max.)** 60VDC/0.3A, 30VDC/1A, 30VAC/0.5A resistive load<br>**FUNCTION**<br>~~SSSS=>~~<br>~~=~~<br>~~_~~<br>1. All parameters NOT specially mentioned are measured at400VAC input, rated load and 25 _ of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>: includes set up tolerance, line regulation and load regulation.<br>4. Dual phase operation is allowed under certain derating to output load.<br>Please refer to derating curves for details.<br>5. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. The ambient temperature derating of 3.5<br>/1000m is needed for operating altitude higher than 2000m(6500ft).<br>7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http:/Wwww.meanwell.com)|**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**OVER VOLTAGE CATEGORY**<br>**OPERATING ALTITUDE Note.6**<br>**WORKING TEMP.**<br>**Note.5**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>2000ms, 60ms/400VAC          1500ms, 60ms/500VAC at full load<br>20ms / 400VAC          40ms / 500VAC at full load<br>Three-Phase 340 ~ 550VAC (Dual phase operation possible<br>) or 480 ~ 780VDC<br>in connecting L1,L3,FG or L2,L3,FG<br>47 ~ 63Hz<br>92%<br>0.69A/400VAC          0.6A/500VAC<br>56 ~ 65V<br>92%<br>COLD START 50A<br><2mA / 530VAC<br>30 ~ 36V<br>Protection type : Constant current limiting, unit will hiccup after 3 sec.<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed.<br>Shut down o/p voltage, recovers automatically after temperature goes down<br>UL61010-1, UL61010-2-201,<br>EAC TP TC 004<br>EN61558-1, EN61558-2-16,<br>approved<br>-30 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃<br>0.05%/<br>(0 ~ 60<br>)<br>Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6<br>515.4K hrs min.<br>Telcordia SR-332(Bellcore); 215.6K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>63*125.2*113.5mm (W*H*D)<br>1Kg ; 12pcs/13Kg/1.06CUFT<br>**TDR-240-48**<br>48V<br>5A<br>0 ~ 5A<br>240W<br>120mVp-p<br>48 ~ 55V<br>±1.0%<br>±0.5%<br>±1.0%<br>**TDR-240-24**<br>24V<br>10A<br>0 ~ 10A<br>240W<br>100mVp-p<br>24 ~ 28V<br>±1.0%<br>±0.5%<br>±1.0%<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:4.87KVAC     I/P-FG:2.4KVAC     O/P-FG:0.5KVAC     O/P-DC OK:0.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note 7)**<br>**PROTECTION**<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>℃<br>℃<br>105 ~ 130% rated output power<br>Ⅲ; According to EN61558, EN50178, EN60664-1, EN62477-1, EN60204-1; altitude up to 2000 meters<br>5000 meters<br>**Parameter**<br>**Parameter**<br>ESD<br>Radiated  Field<br>EFT / Burst<br>Surge<br>Conducted<br>Magnetic Field<br>Voltage Dips and Interruptions<br>Conducted<br>Radiated<br>Harmonic Current<br>Voltage Flicker<br>**Standard**<br>**Standard**<br>EN55032(CISPR32)/EN61204-3<br>EN61000-3-2<br>EN61000-3-3<br>EN61000-4-2<br>EN61000-4-3<br>EN61000-4-4<br>EN61000-4-5<br>EN61000-4-6<br>EN61000-4-8<br>EN61000-4-11<br>**Test Level / Note**<br>**Test Level / Note**<br>Class B<br>Class B<br>Class A<br>-----<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>EN55024 , EN61204-3<br>Level 4, 15KV air ; Level 4, 8KV contact<br>Level 3<br>Level 3<br>Level 3<br>Level 4<br>＞95% dip 0.5 periods, 30% dip 25<br>periods<br>95% interruptions 250 periods<br>＞<br>Level 4, 2KV / Line-Line, Level 4, 4KV/ Line-Earth<br>**POWER FACTOR (Typ.)**<br>PF<br>0.53/400VAC          PF<br>0.52/500VAC at full load<br>≧<br>≧<br>EN55032(CISPR32)/EN61204-3<br>**DC OK REALY CONTACT RATINGS (max.)** 60VDC/0.3A, 30VDC/1A, 30VAC/0.5A resistive load<br>**FUNCTION**<br>~~SSSS=>~~<br>~~=~~<br>~~_~~<br>1. All parameters NOT specially mentioned are measured at400VAC input, rated load and 25 _ of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>: includes set up tolerance, line regulation and load regulation.<br>4. Dual phase operation is allowed under certain derating to output load.<br>Please refer to derating curves for details.<br>5. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. The ambient temperature derating of 3.5<br>/1000m is needed for operating altitude higher than 2000m(6500ft).<br>7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http:/Wwww.meanwell.com)|**TDR-240-24**|**TDR-240-24**|**TDR-240-48**|**TDR-240-48**|
|---|---|---|---|---|---|
||**DC VOLTAGE**|24V||48V||
||**RATED CURRENT**|10A||5A||
||**CURRENT RANGE**|0 ~ 10A||0 ~ 5A||
||**RATED POWER**|240W||240W||
||**RIPPLE & NOISE (max.) Note.2**|100mVp-p||120mVp-p||
||**VOLTAGE ADJ. RANGE**|24 ~ 28V||48 ~ 55V||
||**VOLTAGE TOLERANCE Note.3**|±1.0%||±1.0%||
||**LINE REGULATION**|±0.5%||±0.5%||
||**LOAD REGULATION**|±1.0%||±1.0%||
||**SETUP, RISE TIME**|2000ms, 60ms/400VAC          1500ms, 60ms/500VAC at full load||||
||**HOLD UP TIME (Typ.)**|20ms / 400VAC          40ms / 500VAC at full load||||
||**VOLTAGE RANGE**<br>**Note.4**|Three-Phase 340 ~ 550VAC (Dual phase operation possible<br>) or 480 ~ 780VDC<br>in connecting L1,L3,FG or L2,L3,FG||||
||**FREQUENCY RANGE**|47 ~ 63Hz||||
||**EFFICIENCY (Typ.)**<br>**POWER FACTOR (Typ.)**|92%<br>92%<br>PF<br>0.53/400VAC          PF<br>0.52/500VAC at full load<br>≧<br>≧||||
||**AC CURRENT (Typ.)**|0.69A/400VAC          0.6A/500VAC||||
||**INRUSH CURRENT (Typ.)**|COLD START 50A||||
||**LEAKAGE CURRENT**|<2mA / 530VAC||||
||**OVERLOAD**|Protection type : Constant current limiting, unit will hiccup after 3 sec.<br>105 ~ 130% rated output power||||
||**OVER VOLTAGE**|56 ~ 65V<br>30 ~ 36V<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed.||||
||**OVER TEMPERATURE**|Shut down o/p voltage, recovers automatically after temperature goes down||||
||**DC OK REALY CONTACT RATINGS (max.)** <br>~~SSSS=>~~|60VDC/0.3A, 30VDC/1A, 30VAC/0.5A resistive load<br>~~SSSS=>~~||||
||**WORKING TEMP.**<br>**Note.5**<br>~~SSSS=>~~|-30 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>~~SSSS=>~~||||
||**WORKING HUMIDITY**<br>~~SSSS=>~~|20 ~ 95% RH non-condensing<br>~~SSSS=>~~||||
||**STORAGE TEMP., HUMIDITY**<br>~~SSSS=>~~|-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>~~SSSS=>~~||||
||**TEMP. COEFFICIENT**<br>~~SSSS=>~~|±<br>℃<br>℃<br>0.05%/<br>(0 ~ 60<br>)<br>~~SSSS=>~~||||
||**VIBRATION**<br>~~SSSS=>~~|Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6<br>~~SSSS=>~~||||
||**OPERATING ALTITUDE Note.6**<br>~~SSSS=>~~|5000 meters<br>~~SSSS=>~~||||
||**OVER VOLTAGE CATEGORY**<br>~~SSSS=>~~|Ⅲ; According to EN61558, EN50178, EN60664-1, EN62477-1, EN60204-1; altitude up to 2000 meters<br>~~SSSS=>~~||||
||**SAFETY STANDARDS**<br>~~SSSS=>~~<br>~~=~~|UL61010-1, UL61010-2-201,<br>EAC TP TC 004<br>EN61558-1, EN61558-2-16,<br>approved<br>~~SSSS=>~~<br>~~=~~||||
||**WITHSTAND VOLTAGE**<br>~~=~~|I/P-O/P:4.87KVAC     I/P-FG:2.4KVAC     O/P-FG:0.5KVAC     O/P-DC OK:0.5KVAC<br>~~=~~||||
||**ISOLATION RESISTANCE**<br>~~=~~|I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>~~=~~||||
||**MTBF**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>~~=~~<br>~~_~~|**Parameter**<br>~~=~~|**Standard**<br>~~=~~||**Test Level / Note**<br>~~=~~|
|||Conducted<br>~~=~~|EN55032(CISPR32)/EN61204-3<br>~~=~~||Class B<br>~~=~~|
|||Radiated<br>~~=~~|EN55032(CISPR32)/EN61204-3<br>~~=~~||Class B<br>~~=~~|
|||Harmonic Current<br>~~=~~|EN61000-3-2<br>~~=~~||Class A<br>~~=~~|
|||Voltage Flicker<br>~~=~~|EN61000-3-3<br>~~=~~||-----<br>~~=~~|
|||EN55024 , EN61204-3<br>~~=~~||||
|||**Parameter**<br>~~=~~|**Standard**<br>~~=~~||**Test Level / Note**<br>~~=~~|
|||ESD<br>~~=~~|EN61000-4-2<br>~~=~~||Level 4, 15KV air ; Level 4, 8KV contact<br>~~=~~|
|||Radiated  Field<br>~~=~~|EN61000-4-3<br>~~=~~||Level 3<br>~~=~~|
|||EFT / Burst<br>~~=~~|EN61000-4-4<br>~~=~~||Level 3<br>~~=~~|
|||Surge<br>~~=~~|EN61000-4-5<br>~~=~~||Level 4, 2KV / Line-Line, Level 4, 4KV/ Line-Earth<br>~~=~~|
|||Conducted<br>~~=~~|EN61000-4-6<br>~~=~~||Level 3<br>~~=~~|
|||Magnetic Field<br>~~=~~|EN61000-4-8<br>~~=~~||Level 4<br>~~=~~|
|||Voltage Dips and Interruptions<br>~~=~~|EN61000-4-11<br>~~=~~||＞95% dip 0.5 periods, 30% dip 25<br>periods<br>95% interruptions 250 periods<br>＞<br>~~=~~|
|||515.4K hrs min.<br>Telcordia SR-332(Bellcore); 215.6K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>~~_~~||||
||**DIMENSION**<br>~~_~~|63*125.2*113.5mm (W*H*D)<br>~~_~~||||
||**PACKING**<br>1Kg ; 12pcs/13Kg/1.06CUFT<br>℃<br>℃<br>~~_~~<br>1. All parameters NOT specially mentioned are measured at400VAC input, rated load and 25 _ of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>: includes set up tolerance, line regulation and load regulation.<br>4. Dual phase operation is allowed under certain derating to output load.<br>Please refer to derating curves for details.<br>5. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. The ambient temperature derating of 3.5<br>/1000m is needed for operating altitude higher than 2000m(6500ft).<br>7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http:/Wwww.meanwell.com)|||||



_File Name:TDR-240-SPEC   2020-01-04_ 

## 240W Slim Three Phase Industrial DIN Rail with PFC Function **TDR - 240 series** 

**==> picture [481 x 397] intentionally omitted <==**

**----- Start of picture text -----**<br>
BLOCK DIAGRAM<br>PWM fosc : 60KHz<br>DC OK<br>EMI FILTER PASSIVE POWER RECTIFIERS +V<br>I/P & PFC SWITCHING & -V<br>RECTIFIERS FILTER<br>O.C.P.<br>O.L.P.<br>DETECTION<br>FG<br>PWM CIRCUIT<br>CONTROL CONTROL<br>O.V.P.<br>O.T.P.<br>DERATING CURVE OUTPUT DERATING VS INPUT VOLTAGE<br>100<br>100 Three phase operation<br>90<br>80<br>80<br>Dual phase operation<br>60 70<br>50<br>60<br>40<br>50<br>20<br>40<br>-30 0 10 20 30 40 50 60 70 (VERTICAL) 340 360 380 400 420 440 460 480 500 530 550<br>AMBIENT TEMPERATURE ( ℃ ) INPUT VOLTAGE (V) 60Hz<br>Note : When the dual phase input voltage is between 340~380Vac and ambient temperature is between -10℃~-30℃, the power supply may experience hiccup<br>at cold start. The power supply will start up normally after 5~10 seconds.<br>LOAD (%) LOAD (%)<br>**----- End of picture text -----**<br>


## **DC OK RELAY CONTACT** 

|||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Contact Close|PSU turns on / DC OK.|||||||||||||||||||||||||||||
|Contact Open|PSU turns off / DC Fail.|||||||||||||||||||||||||||||
|Contact Ratings (max.)|30VDC/1A, 30VAC/0.5A resistive load.|||||||||||||||||||||||||||||
|Terminal Pin No. Assignment (TB2)||||||||||||||||||||||||||||||
|Pin No.<br>Assignment||||||||||||||||||||||||||||||
|5,6<br>DC OK Relay Contact||||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||||
|||||||TB2||||||||||||||||||||||||
|||||||||||||||||||||||||||||||
|※Please contact MEAN WELL||for more details.|||||||||1|||2|||3|||4|||5||6|||||



_File Name:TDR-240-SPEC   2020-01-04_ 

> 240W Slim Three Phase Industrial DIN Rail with PFC Function **TDR - 240 series** 

**==> picture [495 x 671] intentionally omitted <==**

**----- Start of picture text -----**<br>
MECHANICAL SPECIFICATION<br>Case No. 979D      Unit:mm<br>Top View<br>113.5 63<br>1 2 3 4 5 6<br>TB2<br>+V ADJ. +<br>DC OK<br>1 2 3 4<br>TB1<br>Side View Front View Side View<br>Terminal Pin No. Assignment (TB1)<br>Pin No. Assignment<br>1 AC/L1<br>2 AC/L2 or DC -<br>3 AC/L3 or DC +<br>4 FG<br>Terminal Pin No. Assignment (TB2)<br>Pin No. Assignment<br>1,2 DC OUTPUT +V<br>3,4 DC OUTPUT-V<br>Bottom View 5,6 DC OK Relay Contact<br>Installation Instruction<br>This series fits DIN-RAIL TS35/7.5 or TS35/15.<br>For installation details, please refer to the Instruction manual.<br>ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15<br>(For reference only. Not included with unit.)<br>Back View<br>Installation Manual<br>36<br>35<br>125.2<br>**----- End of picture text -----**<br>


Please refer to : http://www.meanwell.com/manual.html 

_File Name:TDR-240-SPEC   2020-01-04_
Updated at June 4, 2026
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →