TAA1U

## TIME DELAY RELAYS Product Summary 

Macromatic offers a wide variety of time delay relays and accessories.  Each one has different features and operating characteristics, allowing you to choose the exact product to meet your needs.  Our time delay relays are available in either programmable or non-programmable versions.  We offer both single or multiple function time delay relays. Choose between SPDT or DPDT relay outputs & solid state outputs for high duty cycle applications.  Time delay relays are available as plug-in units for use with industry standard 8 & 11 pin octal sockets.  They also come in 2” x 2” encapsulated & 1/16 DIN mounting configurations.  Choose between analog or digital-set time delay relays.  Refer to the Selection Table on this page for more information. 

|**Product Series**|**Product Series**|**Mounting**<br>**Configuration**|**Time Delay**<br>**Setting &**<br>**Ranges**|**Functions**|**Input**<br>**Voltages**|**Output**|**See**<br>**Pages**|
|---|---|---|---|---|---|---|---|
|=<br>=<br>'ee<br>|<br>af|**THR Series**<br>**Relay Output**|2" x 2"<br>Encapsulated<br>Panel Mounted<br>with One Screw|Analog-Set<br>0.1 SEC - 100<br>HR|Single-<br>Function|12VDC,<br>24VAC/DC,<br>120VAC/DC,<br>240VAC|10A SPDT<br>Relay|43-49|
|2<br>o|**THS Series**<br>**Solid State**<br>**Output**||Analog-Set<br>0.01 SEC - 100<br>HR|Single-<br>Function|24-240VAC,<br>12-48VDC|1A SPNO<br>Solid State|50-53|
||**THL Series**<br>**Solid State**<br>**Inline (Series)**<br>**Output**||Analog-Set<br>0.01 SEC - 100<br>HR|Single-<br>Function|240-240VAC<br>& 12-48VDC|1A SPNO<br>Solid State|54-55|
|p<br>ints<br>ab ig|**TR-5 Series**<br>**Standard**|Plug-in Utilizing<br>Industry-Standard<br>8 & 11 Pin<br>Sockets|Analog-Set<br>0.05 SEC - 2<br>HR|Single-<br>Function|12VDC,<br>24VAC/DC,<br>120VAC/DC,<br>240VAC|10A DPDT<br>10A SPDT<br>Relay|56-59<br>60-61|
||**TR-6 Series**<br>**_Time Ranger_**<br>**Programmable**||Analog-Set<br>Multi-Range<br>0.1 SEC - 24<br>HR|Single-<br>Function|12VAC/DC,<br>24VAC/DC,<br>120VAC/DC,<br>240VAC|10A DPDT<br>Relay|62-65|
||**TD-8 Series**<br>**_Time Ranger_**<br>**Digital-Set**<br>**Programmable**||Digital-Set<br>Multi-Range<br>0.1 SEC -<br>1,023 HR|Multi-Function<br>(16) &<br>Single-<br>Function|12VAC/DC,<br>24VAC/DC,<br>120VAC/DC,<br>240VAC|10A DPDT<br>10A SPDT<br>Relay|66-68|
|i,<br>| ese<br>g<br>Pe<br>al|**TD-7 Series**<br>**_Time Ranger_**<br>**Digital-Set**<br>**Programmable**||Digital-Set<br>Multi-Range<br>0.05 SEC -<br>999 HR|Multi-Function<br>(10) &<br>Single-<br>Function|12VAC/DC,<br>24VAC/DC,<br>120VAC/DC,<br>240VAC|10A DPDT<br>10A SPDT<br>Relay|69-71|
|4<br>¥<br>ie<br>~~|**SS-6 & SS-8**<br>**Series**<br>**Compact**||Analog-Set<br>0.2 - 300 SEC|Single-<br>Function|12VDC,<br>24VAC/DC,<br>120VAC|5A SPDT<br>Relay|76|
||<br>=ALststl<br>|inacie)|**TAD Series**<br>**Digital-Set**<br>**1/16 DIN**|1/16 DIN<br>(48mm2)|Digital-Set<br>Multi-Range<br>0.01 SEC -<br>9,990 HR|Multi-Function<br>(10)|24-240VAC<br>&<br>24-240VDC|5A DPDT<br>Relay|72-73|
|o— 2|**TAA Series**<br>**Analog-Set**<br>**1/16 DIN**||Digital-Set<br>Multi-Range<br>0.05 SEC -<br>100 HR|Multi-Function<br>(6)--2<br>Versions|100-240VAC<br>&<br>24-240VDC|5A DPDT<br>Relay|74-75|



10/12 

42 

## TIME DELAY RELAYS TAD Series Digital-Set Multi-Function Multi-Range 1/16 DIN Mounting 

**==> picture [311 x 89] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|MULTI-|INPUT|PRODUCT|WIRING/|
|FUNCTION|VOLTAGE|NUMBER|SOCKETS|
|10 FIELD-|24-240V AC 50/60Hz|TAD1U|SEE|
|SELECTABLE|& 24-240V DC|DIAGRAMS|
|FUNCTIONS|ON PAGE 73|
|8 Pin Octal|
|(See Below)|

**----- End of picture text -----**<br>


Push-button thumbwheels for digital-setting of time delay & selection of function 

10 field-selectable functions in one unit 

10ms to 9,990 Hours programmable timing range 

Universal 24-240V AC/DC input voltage 

LCD display 

Panel, track or surface mounting 

1/16 DIN style case (comes with panel-mounting adapter) 

5A SPDT output contacts 

Functions Include: On Delay (2 Versions), Interval, Flicker [Flasher] (2 Versions), One Shot Out Flicker [Delayed Interval/Pulse], Off Delay, On/Off Delay, Interval Delay [Single Shot] & Integration Time [Accumulative On Delay] (see Page 73 for additional details) 

## See below for **Sockets & Accessories.** 

## Application Data 

## **Voltage Tolerance:** 

**LCD Display** : Shows time remaining in both digit & bar graph form--also shows relay status & time base.  In addition, a switch on the bottom of the unit allows choice of timing up or timing down display. 

+ _ 10% of rated voltage 

**Load (Burden):** Less than 2.5 VA 

~~—_—_—_—_—_—_—_—_—_———~~ **Repeat Accuracy:** +0.01%, +0.05 seconds (includes variation due to voltage and temperature changes) 

## **Output Contacts:** 

5A SPDT Resistive @ 250V AC 

**Life:** ~~—~~ Mechanical:  10,000,000 operations Full Load: 100,000 operations 

~~—_—___~~ **Recycle Time:** 0.2 seconds maximum 

## **Temperature:** 

-10[[o]] to 55[[o]] C (14[[o]] to 131[[o]] F) **Approvals** ~~—~~ **:** WW. File #E170213 Sockets & Accessories ~~ee~~ **PRODUCT DESCRIPTION NUMBER** 8 Pin Octal Socket 70169-D 8 Pin Octal Socket (Back Mounting) SR6P-M08G Panel-Mounting Adaptor Included ~~os~~ **SR6P-M08G** te, , a For Surface or Track Mounting--See Page 80 for additional information 

- -10[[o]] to 55[[o]] C (14[[o]] to 131[[o]] F) 

Sockets & Accessories 

## Dimensions 

**800-238-7474** 

**www.macromatic.com sales@macromatic.com** 

**==> picture [271 x 125] intentionally omitted <==**

**----- Start of picture text -----**<br>
;<br>PANEL CUTOUT<br>— 2.9 (74)  : Min. 53<br>Mi aE:<br>_ a | | ee ‘9<br>All dimensions are Min. 62 45 108 |<br>IN (mm)<br>All Dimensions in<br>Millimeters<br>**----- End of picture text -----**<br>


8/11 

72 

## TIME DELAY RELAYS TAD Series Digital-Set Multi-Function Multi-Range Definition of Timing Functions **Functions for TAD1U** Mode Time chart | Mode ~~|~~ Time chart A eower | [imi snes SS i ~~a~~ T.1 Je TT, 1,72 Tas 77a RESET SS i—smml_fe _t : : RESET ae pt ia 28s RELAY OUT : 5 i+ : + HELAY OUI A _t_+__. A__f_____i___a wenaee PTT --t-g ae” ise wwe F-bog-g-Petg@-a-ap bt owt to one-shot ON Delelay _ a _ One-shot OSPLAY set - _ as ouput @ 1. Time progresses‘Bout Mabewhen START signal-is ON. : : Out Flicker 1. Time progressesimmafrom initial<~Wnvalue to the preset«wasvalue repeatedly«4and the output operatesOm as one-shot 2. The output will be ON when the setting value is equal to the display value. (Position ©) (0.3 sec), when the START signal is ON. (Position ) 3. When the RESET signal is ON. the display value is returned to the initial state. (Position @) 2. If the RESET signal is ON, it is returned to initial state. (Position @) 4. When the setting value is equal to the display value. if START signal is OFF. the output turns off. When START signal is applied repeatedly, only the initial signal is recognized. (Position @) the display value is held. (Position 2) If START signal is OFF when the output Is OFF the display value Is returned to Initial state(Position ) | B —_ n ~~sy ey~~ H we ~~own~~ why wn POWER : L - - —S : L POWLR ————= a — RESETSTAAT x H —_— - —_a RESETSTART ra————_ea ee _——_—_—.: Dt_—— as!—— RFLAY OUT - i_ i RELAY OUT a om 1. UP MANEser — i>: a : jose: : ae: uP MOSel -PpoPRricpod iiiiiieieieiaa>”i | te @Delay DISPLAYDOWN MOLESETa J — — = — > —i—i ee — —!—:j — pe ee — — i:i , OFF Delay DISPLAYDOWN NODEsero > — — +ii = = ~anie: 7. Ihe output turns ON and time progresses when SIAHI signal is ON 1. The START signal & the output are ON at the same time. The output will return and the display value is held 2. Ihe output will be ON when the setting value is equal to the display value. (Position ©) after the setting time. . 3. When the RESEI signal is ON, the display value is returned to the initial state. (Position @) 2. Ii the RESET signal is ON, the display value is returned to initial state. a 3% If START signal is OFF when the output is OFF the display value is returned to initial state. (Position @) u%# If the START signal is applied continuously, the output will be ON but time is not progressed. c POWER a7 _ 7 “ SSa Zi us POWER ~~aTe~~ Tee eaeTg Ta, 7g T : " ; START ——t : 11 ____l1_ : START | a RESET $i _—m + a__:__a__RESET —e : it iO “ ‘ RELAYuP OUTi+ 4 aa —cee+ _—ii eaezt RELAYoweOUT | OT tTtidy : cera_ ——eE I i (a ON Delay DISPLAY MODESET° > —pS—_—H — £ > Pyme -)—pee: — puif— — aa: spayUP MOIaxe i —_ eeea. ! aE ® Pawn mers i ! 5i ee — i ON/OFF Delay OFLA ger0 ae Sp 1. Time proceeds when START signal is ON. 1. When the START signal is ON the output is ON the output will be resect and display valuc is held when sctting 2. The output will be ON when the sctting valuc is cqual to the display valuc. (Position ®) value is equal to display value. 3. When the RESET signal is ON, the display value is returned to the initial state 2. The START signal turns OFF, the output turns ON, the output will be reset and display value is held when When start signal is applied repeatedly(Position ©), only the initial signal is recognized. sctting valuc is cqual to display valuc. x Even if the START signal is not applied, time progresses. (Position @) 3. If RESET signal is ON, it is returned to initial state. | ; ae If START signal is applied repeatedly, output keeps ON but be sure that the time will be initialized. D POWER ! 7 ~~a~~ ! er: : ra = L POWER T Ts aT T T — START = as START a 7 + RESET + + a = RESET — am _—#_i_ RELAY OUT : ‘ : } : : : RFLAY OUT $ ' ul A Flickeri oseuayDOWNuP MODEMODEeescr0 Pomi apa eea i --1-2fiii pcefeer Interval Delay niseiayDOWN1p MGBEMODEsergp5 F-PtDope pa fipspota ; Te ar-_ : ta: eefot aoe 1. Time prograsses repeatedly when the START signal is ON 7. When START signal is ON, the output turns ON and the time progresses at the same time. 2. The output aparates trom NC to NO, and trom NO ta NG raneatedly 2. When the time reaches at the preset value the output will be reset, and the display value is held. J. If RESET signal is ON, it is reterned to initial state. (Position @) 4. It RESET signal is applied, the display value is returned to initial state If the START signal is OFF, the display value and output is returned to initial state. (Position 2) When START signal is applied repeatedly, only the initial signal is recognized. (Position @) E POWFRstart | mmm ~~ee~~ >T Totatp= Toteos ~~ee~~ Ta Too— N POWERSTART —: ~ 2 im :vepannaTa TT i .asela TD: visriayRELAYRESETOUTSET5§ i —H: eei-4 iH itL Hl‘ Integration. RELAYUFRFSETMOLEOUTSET7 i:ii rribid oeisaebod nsipotelmre Flickicker DOWN MOEger — pe ispea ~~ i~ ~~ —SNF= <a Time" DISPLAYDOWN MODEger f —hb».ues ik1 hets | iL © 1.2.3. TimeTheIf RESEToutputprogressessignaloperatesisrepeatedlyON,fromit isNCreturnedwhento NO.thetoandSTARTinitialfromstate.signalNO to(PositionisNCON.repeatedly@) 2.3.1. WhenIfIf STARTRESETSTART signalsignalsignalturnsis ON,is offON,it isbeforetimereturnedprogresses.the displayto initialvaluestate.reaches the setting value, the time (display value) will be held, When START slgnal Is applled repeatedly, only the Initlal slanal Is recognized. (Position @) NOTE: Timing is paused when the INHIBIT signal is ON during a timing cycle and resumes when it is OFF. **TAD1U All Functions** START 7 3 @ le + ~O= -O~ **DIAGRAM 171** 9/12 73 

## TIME DELAY RELAYS TAA Series 

## Analog-Set Multi-Function Multi-Range 1/16 DIN Mounting 

6 field-selectable functions in one unit 

|**MULTI-**<br>**FUNCTION**<br>Includes Six (6) Functions<br>Built-in (See Page 75 for<br>additional information)|**INPUT**<br>**VOLTAGE**<br>100-240V AC<br>50/60Hz<br>& 24-240V DC|**PRODUCT**<br>**NUMBER**<br>TAA1U|**WIRING/**<br>**SOCKETS**<br>**SEE DIAGRAMS**<br>**ON PAGE 75**<br>8 Pin Octal<br>**(See Below)**|
|---|---|---|---|
|Includes Six (6) Func-<br>tions Built-in (See Page<br>75 for additional informa-<br>tion)|100-240V AC<br>50/60Hz<br>& 24-240V DC|TAA2U|**SEE DIAGRAMS**<br>**ON PAGE 75**<br>11 Pin Octal<br>**(See Below)**|



See Page 75 for additional details on Functions. 

Large dial for setting of time delay 

See below for **Sockets & Accessories.** 

## Application Data 

50ms to 100 Hours programmable timing range 

## **Voltage Tolerance:** 

## **LED Indicators** : One red LED 

+10% of rated voltage. 

indicates Input Voltage/Timing (flashing) & a second red LED indicates relay status. 

**Load (Burden):** ~~_~~ Less than 2.5 VA 

Universal 100-240V AC/ 24-240V DC input voltage 

## **Output Contacts:** 

~~o~~ Panel, track or surface ~~—~~ + **Repeat Accuracy** 0.01%, +0.05 seconds (includes **:** mounting variation due to voltage and temperature **Life:** changes). ~~o~~ 1/16 DIN style case (comes with panel-mounting **Recycle Time:** adapter) 0.2 seconds maximum. **Approvals:** 

5A DPDT Resistive @ 250V AC 

Mechanical:  10,000,000 operations Full Load: 100,000 operations 

adapter) 0.2 seconds maximum. **Approvals:** ~~—~~ **:** AL: ~~o~~ 5A DPDT output contacts **Temperature** ~~—~~ -10[o] to 55[o] C (14 **:**[o] to 131[o] F) File #E170213 ~~*~~ Sockets & Accessories 

**PRODUCT DESCRIPTION NUMBER** 8 Pin Octal Socket 70169-D 8 Pin Octal Socket (Back Mounting) SR6P-M08G **SR6P-M08G** 11 Pin Octal Socket 70170-D 11 Pin Octal Socket (Back Mounting) SR6P-M11G SS ef Panel-Mounting Adaptor Included ~~P~~ a For Surface or Track Mounting--See Page 80 for ~~de~~ >| **SR6P-M11G** additional information 

## Dimensions 

**PANEL CUTOUT** 

**800-238-7474 www.macromatic.com sales@macromatic.com** 

**==> picture [272 x 17] intentionally omitted <==**

**----- Start of picture text -----**<br>
All dimensions are All Dimensions in<br>IN (mm) Millimeters<br>**----- End of picture text -----**<br>


10/12 

74 

## TIME DELAY RELAYS TAA Series Analog-Set Multi-Function Multi-Range Definition of Timing Functions 

## **Functions for TAA1U** 

**TAA1U Functions A, F** 

**DIAGRAM 134** 

**TAA1U Functions A1, B, F1 & I** 

**DIAGRAM 182** 

## **Functions for TAA2U** 

## **TAA2U All Functions** 

**DIAGRAM 183** 

8/11 

75