T9VV1K15-12S.

General Purpose Relays Power Relays 

**Potter & Brumfield** 

## **Power PCB Relay T9V Solar** 

- n **1 pole 40A, 1 form A (NO) contact** n **Contact gap >1.8mm (suffix S)** 

- n **350mW hold power** 

- n **Ambient temperature up to 85°C at 35A** 

- n **The appliance is able to meet VDE V 0126-1-1** 

- n **Product in accordance to IEC 60335-1** 

- n **EN61095: AC7a at 85°C** 

Typical applications Electrical vehicle loading stations Electrical vehicle Photovoltaic inverter 

**==> picture [24 x 4] intentionally omitted <==**

**----- Start of picture text -----**<br>
f0156_bc_inv<br>**----- End of picture text -----**<br>


## ~~**Approvals**~~ 

VDE 40030974, UL E58304, CQC16002145203, TUV R50369970 

Technical data of approved types on request 

**==> picture [250 x 217] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Contact Data|
|Contact arrangement|1 form A (NO)|
|Contact gap|>1.8mm|
|Rated voltage|277VAC (1.8mm gap)|
|Rated current|40A|[1)]|
|Breaking capacity max.|10 000 VA|
|Contact material|AgNi|
|Initial contact resistance|75mΩ max. at 1A 6VDC|
|Frequency of operation, with/without load|6/300min|[-1]|
|Operate/release time max., incl bounce time|18/15ms|
|Contact ratings|[2)]|
|Type|Contact|Load|Cycles|
|IEC 61810|
|T9VV1K15-12S  A (NO)|35A, 250VAC, cos|φ|=1, 85°C|20x10|[3]|
|UL 508|
|T9VV1K15-12S  A (NO)|35A, 250VAC, resistive, 85°C|20x10|[3 ]|
|T9VV1K15-12S  A (NO)|40A, 30VDC, resistive, 70°C|60x10|[3]|
|CQC|
|T9VV1K15-12S  A (NO)|40A, 250VAC, resistive, 60°C|20x10|[3]|
|TUV|
|T9VV1K15-12S    A (NO)         40A, 30VDC, resistive, 70°C|60x10|[3 ]|
|Mechanical endurance, DC coil|1x10|[6]|operations|

**----- End of picture text -----**<br>


1)  The relay connections and wiring have to be designed with an adequate cross sections to ensure the current flow and heat dissipation. 

2) Contact ratings with relay properly vented. 

**==> picture [253 x 262] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Insulation Data|
|Initial dielectric strength|
|between open contacts|2500Vrms|
|between contact and coil|4000Vrms|
|Initial surge withstand voltage|
|between contact and coil|6kV|
|Clearance/creepage|
|between contact and coil|3/4mm|
|Material group of insulation parts|III|
|Tracking index of relay base|PTI 325|
|Other Data|
|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content|
|refer to the Product Compliance Support Center at|
|www.te.com/customersupport/rohssupportcenter|
|Ambient temperature|-40 to +85°C|[1) ]|
|Category of environmental protection|
|IEC 61810|RTII - flux proof|
|Vibration resistance (functional)|10g|
|Shock resistance (functional)|10g|
|Shock resistance (destructive)|100g|
|Terminal type|PCB-THT|
|Mounting|see note|[1) ]|
|Mounting distance|≥10mm|
|Weight|appr. 30g|
|Resistance to soldering heat THT|
|IEC 60068-2-20|260°C/5s|
|Packaging unit|box/500 pcs.|

**----- End of picture text -----**<br>


1) The relay connections and wiring have to be designed with an adequate cross sections to ensure the current flow and heat dissipation. 

## ~~**Coil Data**~~ 

**==> picture [253 x 89] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||
|---|---|---|---|---|---|---|
|Rated coil voltage|12VDC|
|Coil insulation system according UL|class F|
|Coil versions, DC coil|
|Coil|Rated|Operate|Release|Coil|Rated coil|
|code|voltage|voltage|voltage|resistance|power|
|VDC|VDC|VDC|Ω±10%|W|
|12|12|[3)]|9.6|0.8|64+10%|2.25 /|
|min. 0.35|
|hold|

**----- End of picture text -----**<br>


- 3)  After the energization time of 100 ms with 12 VDC the coil requires a reduction of the  coil voltage to 4.7...6.0 VDC. 

- All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 

1 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

07-2017, Rev. 0717 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

General Purpose Relays Power Relays 

**Potter & Brumfield** 

## **Power PCB Relay T9V Solar** (Continued) 

## **Dimensions** 

**PCB layout / terminal assignment** Bottom view on solder pins 

## **Notes** 

**1) General tolerance** 

|**Diagram Dimension**|**Tolerance**|
|---|---|
|< 1 mm|±0.1|
|1 ~ 3 mm<br>> 3mm|±0.2<br>±0.3|



- **2) Dimensions of the pins after tin soldering a)** +0.4 for the width and the thickness **b)** +1.0 for the length 

**Product code Version Contact arrangement Contact material Contact gap Coil Part Number** T9VV1K15-12S PCB, fux tight 1 form A (NO) contact AgNi >1.8mm 12VDC 2027395-5 

2 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

07-2017, Rev. 0717 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions