T9SV1K15-12..

General Purpose Relays Power Relays 

**Potter & Brumfield** 

## **Power PCB Relay T9S** 

> n **1 pole 35A, 1 form A (NO) contact** 

- n **Contact gap >1.5/1.8/2.1 mm options available** n **350mW hold power[1)]** 

- n **Ambient temperature up to 85°C at 35A** 

- n **Meet VDE 0126-1-1 and IEC 62109-2** 

- n **Product in accordance to IEC 60335-1** 

- n **EN61095: AC7a at 85°C** 

Typical applications Photovoltaic inverter Electrical vehicle loading stations Electrical vehicle 

**==> picture [76 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
f0156_bc_inv<br>U<br>**----- End of picture text -----**<br>


## ~~**Insulation Data**~~ 

||||~~**Insulation Data**~~||
|---|---|---|---|---|
||||Initial dielectric strength||
|~~**Approvals**~~|||between open contacts|2500Vrms|
|VDE 40030974, UL E58304, TUV  R50369970|||between contact and coil|4000Vrms|
|Technical data of approved types on request|||Initial surge withstand voltage||
||||between contact and coil|6kV (1.2 /50 uS)|
|~~**Contact Data**~~|||Initial insulation resistance (at 500VDC)||
|Contact arrangement|1 form A (NO)||between open contacts|1X109Ω|
|Contact gap<br>>1.5mm      >1.8mm      >2.1mm|>1.5mm      >1.8mm      >2.1mm||between contact and coil|1X109Ω|
|Rated voltage                                                     250/277VAC, 30VDC|Rated voltage                                                     250/277VAC, 30VDC||Clearance/creepage||
|Rated current|35A2)||between contact and coil||
|Breaking capacity max.|9695VA, 1200W||>1.5/1.8 mm type|3/4mm|
|Contact material|Ag alloy||>2.1 mm type<br>4.2/5.6mm|4.2/5.6mm|
|Initial contact resistance<br>75mΩ max. at 1A 6VDC|75mΩ max. at 1A 6VDC||||
|Frequency of operation, with/without load          6 cycles / min = with|||||
|300 cycles / min|300 cycles / min=without||~~**Other Data**~~||
|Operate/release time max., incl bounce time              18/15ms|||Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content|



|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content|
|---|---|---|
|refer to the Product Compliance Support Center at|||
|www.te.com/customersupport/rohssupportcenter|||
|Ambient temperature|-40 to +85°C2)|2)|
|Category of environmental protection|||
|IEC 61810|RTII - flux proof<br>RTIII - wash tight||
|Vibration resistance (functional)|10-50Hz||
|double amplitude 1.5mm|||
|Shock resistance (functional)|10g||
|Shock resistance (destructive)|100g||
|Terminal type|PCB-THT||
|Mounting|see note2)||
|Weight|appr. 30g||
|Resistance to soldering heat THT|||
|IEC 60068-2-20|260°C/10s||
|Packaging unit|box/500 pcs.||



## ~~**Contact ratings[3)]**~~ 

|Type|Load|Load|||Cycles|
|---|---|---|---|---|---|
|**IEC 61810**||||||
|1.5mm gap (Suffix blank)|1.5mm gap (Suffix blank)|||||
|NO|35A, 250VAC, resistive, 85°C|35A, 250VAC, resistive, 85°C||35A, 250VAC, resistive, 85°C|30x103|
|1.8mm gap (Suffix S)||||||
|NO|35A, 250VAC, resistive, 85°C|35A, 250VAC, resistive, 85°C||35A, 250VAC, resistive, 85°C|20x103|
|NO|40A, 30VDC, 70°C|40A, 30VDC, 70°C|40A, 30VDC, 70°C||60x103|
|2.1mm gap (Suffix T)||||||
|NO|35A, 277VAC, resistive|35A, 277VAC, resistive||35A, 277VAC, resistive|30x103|
|**UL 508**||||||
|1.5mm gap (Suffix blank)|1.5mm gap (Suffix blank)|||||
|NO|35A, 277VAC, resistive, 85°C|35A, 277VAC, resistive, 85°C||35A, 277VAC, resistive, 85°C|30x103|
|1.8mm gap (Suffix S)||||||
|NO|35A, 250VAC, resistive, 85°C|35A, 250VAC, resistive, 85°C||35A, 250VAC, resistive, 85°C|20x103|
|NO|40A, 30VDC, 70|40A, 30VDC, 70°C|C||60x103|
|Mechanical endurance, DC coil|||5x105|||
|||||||
|~~**Coil Data**~~||||||
|Rated coil voltage|||12VDC|||
|Coil insulation system according UL||Coil insulation system according UL|class F|||
|**Coil versions, DC coil**||||||
|Coil<br>Rated|Operate|Release||Coil|Rated coil|
|code<br>voltage|voltage|voltage|resistance||power|
|VDC|VDC|VDC|Ω±10%||W|
|12<br>see note1)|9.6|0.8|64+10%||2.25 /|
||||||min. 0.35|
||||||hold|



- 1) Rated Voltage: 12VDC. After the energization time of 100ms with 12 VDC the coil requires a reduction of the coil voltage to **4.7...6.0** VDC. 

- 2) The relay connections and wiring have to be designed with an adequate cross sections to ensure the current flow and heat dissipation. 

- 3) Contact ratings with relay properly vented. Only typical ratings listed, more ratings on request. 

All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

1 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

12-2019, Rev. 1219 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

General Purpose Relays Power Relays 

**Potter & Brumfield** 

## **Power PCB Relay T9S** (Continued) 

## **Dimensions** 

**PCB layout / terminal assignment** Bottom view on solder pins 

## **Notes** 

**1) General tolerance** 

|**Diagram Dimension**|**Tolerance**|
|---|---|
|< 1 mm<br>1 ~ 3 mm<br>> 3mm|±0.1<br>±0.2<br>±0.3|



- **2) Dimensions of the pins after tin soldering** 

- **a)** +0.4 for the width and the thickness 

**b)** +1.0 for the length 

**Product code structure** Typical product code **T9S V 1 K 1 5 -12 S Type T9S** Power Relay T9S Series **Enclosure V** Flux-proof plastic case **S** Wash tight **Contact arrangement 1** 1 Form A (1 NO) **Coil Input K** DC coil, 2.25W **Mounting and termination 1** PCB mounting; PCB terminals for coil and contacts **Contact material 5** AgNi **8** Special Ag Alloy **Coil voltage Coil code:** Please refer to coil version table **Contact Gap blank** 1.5mm contact gap **S** 1.8mm contact gap **T** 2.1mm contact gap 

|**Product code**|**Version**|**Contact arrangement**|**Contact material**|**Contact gap**|**Coil**|**Part Number**|
|---|---|---|---|---|---|---|
|T9SV1K15-12|PCB, flux proof|**Contact arrangement**<br>1 form A (NO) contact|AgNi|**Contact gap**<br>>1.5mm|12VDC|2027395-1<br>2027395-3|
|T9SV1K15-12S||||>1.8mm|||
|T9SS1K15-12S|PCB, wash tight<br>l|||>1.8mm||2027395-6|
|T9SV1K18-12T|PCB, flux proof||Special Ag alloy|>2.1mm||2027395-7|



Note: only typical PN listed, other types on request. 

2 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

12-2019, Rev. 1219 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions