SLE06S0599B01

## **SL POWER SLE06 SERIES** 

6 Watt Single Output External Power Adapters 

Advanced Energy's SL Power SLE06 series of plug-in 

wall-mount AC-DC power adapters feature both medical and ITE safety approvals. It meets Department of Energy Level VI and European Code of Conduct V5 Tier 2 Directive efficiency standards. 

## **AT A GLANCE** 

## **Total Power** 

## **6 Watts** 

**==> picture [23 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Medical<br>**----- End of picture text -----**<br>


**==> picture [27 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Industrial<br>**----- End of picture text -----**<br>


## **Input Voltage** 

## **90 to 264 VAC** 

## **SPECIAL FEATURES** 

## **SAFETY** 

>  Medical and ITE safeties  CB Medical: IEC 60601-1 

>  Available in interchangeable AC plugs ITE: IEC 62368-1 or fixed blade versions  UL Medical: UL 60601-1, 

>  2 x MOPP input to output isolation CSA C22.2 No. 60601-1 

>  Suitable for medical equipment up to ITE: UL 62368-1, CAN/CSA C22.2 No. 62368-1 

- Suitable for medical equipment up to class BF 

Medical: EN 60601-1 ITE: EN 62368-1 

   - TUV 

- Low leakage current less than 10 μA 

- Overvoltage, overcurrent and short circuit protection 

   - RCM ITE: AS/NZS 62368-1 

   - CCC ITE: GB4943.1 

- EU CoC V5 Tier 2 compliant 

   - KC K62368-1 

- DoE efficiency level VI 

   - (4.2 to 6 VDC models only) 

- ≤ 0.075 W standby power 

## **# of Outputs** 

## **Single** 

VI 1P20 ciassi1 () 

- Up to 5000 m operating altitude 

©2022 Advanced Energy Industries, Inc. 

**SLE06** 

## **ELECTRICAL SPECIFICATIONS** 

**==> picture [479 x 242] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input<br>Input Voltage Range 90 to 264 VAC<br>Frequency 47 to 63 Hz<br>Input Current 0.2 A @ 90 VAC<br>Inrush Current 30 A @ 240 VAC cold start<br>Touch Leakage Current ≤ 10 μA @ 264 VAC<br>Isolation Safety Rating Input to output: 4,000 VAC (2 x MOPP)<br>Dielectric Withstand Voltage Input to output: 5,656 VDC<br>Insulation Resistance Input to output: 100 Mohms, 500 VDC<br>Output<br>Output Voltage 5.0 V, 9.0 V, 12.0 V<br>Voltage Regulation ±5%<br>Start-up Delay ≤ 3 s<br>Hold-up Time 10 ms typical at full load @ 230 VAC<br>Overvoltage Protection 120% to 150% rated output voltage, recycle input to reset<br>Overload Protection 120% to 150% rated output power, auto-recovery<br>Short Circuit Protection Trip and restart, hiccup mode<br>**----- End of picture text -----**<br>


**==> picture [479 x 62] intentionally omitted <==**

**----- Start of picture text -----**<br>
RELIABILITY<br>MTBF > 100,000 hours MIL-HDBK-217 at 25°C<br>**----- End of picture text -----**<br>


## **ENVIRONMENTAL SPECIFICATIONS** 

**==> picture [479 x 115] intentionally omitted <==**

**----- Start of picture text -----**<br>
Operating Temperature 0 to +45°C ambient<br>Storage Temperature -20 to +60°C<br>Operating Humidity 10% to 90% RH, non-condensing<br>Storage Humidity 5% to 90% RH<br>Operating Altitude 5,000 m<br>Weight 85 g<br>Dimension 73.5 x 42.5 x 30.7 mm<br>Packing Quantity Individual box: 50/carton, egg-crate: 100/carton<br>**----- End of picture text -----**<br>


**2 advancedenergy.com** 

**SLE06** 

## **EMC/EMI COMPLIANCE** 

**==> picture [479 x 201] intentionally omitted <==**

**----- Start of picture text -----**<br>
Conducted Emissions Medical: IEC/EN 60601-1-2, CISPR 11<br>ITE: EN 55022, CISPR 22<br>Radiated Emissions Medical: IEC/EN 60601-1-2, CISPR 11<br>ITE: EN 55022, CISPR 22<br>Immunity Medical: IEC/EN 60601-1-2<br>ITE: EN 55024, CISPR 24<br>Electro-Static Discharge (ESD) Immunity on Power Ports EN 61000-4-2, ±15 kV air, ±8 kV contact<br>Radiated RF EM Fields Susceptibility EN 61000-4-3, 10 V/m, 3 V/m (80 MHz to 2700 MHz)<br>Electrical Fast Transients (EFT)/Bursts EN 61000-4-4, ±2 kV on AC port, ±1 kV on signal ports<br>Surges, Line to Line (DM) and Line to Ground (CM) EN 61000-4-5, ±1 kV line to line (diff mode)<br>Conducted RF Immunity EN 61000-4-6, 3 Vrms, 6 Vrms (0.15 MHz to 80 MHz)<br>Power Frequency Magnetic Field Immunity EN 61000-4-8, 30 A/m<br>Voltage Dip Immunity EN 61000-4-11, 0%, 70%, 0% of UT<br>Harmonic Current Emissions EN 61000-3-2, Class A<br>Flicker Test EN 61000-3-3<br>**----- End of picture text -----**<br>


## **ORDERING INFORMATION - SLE06 SERIES** 

**==> picture [479 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
Model Number3,4,5 Maximum  Output 1 Maximum Load Ripple & Noise2 Line Regulation Load  Efficiency<br>Power Voltage Regulation (Average)<br>SLE06S0503B01 5.0 W 5.0 V 1.0 A 150 mV pk-pk ± 1% ± 5% 73.83%<br>SLE06S0903B01 5.4 W 9.0 V 0.6 A 200 mV pk-pk ± 1% ± 5% 73.77%<br>SLE06S1203B01 6.0 W 12.0 V 0.5 A 200 mV pk-pk ± 1% ± 5% 78.16%<br>SLE06S0503C01 5.0 W 5.0 V 1.0 A 150 mV pk-pk ± 1% ± 5% 73.83%<br>SLE06S0903C01 5.4 W 9.0 V 0.6 A 200 mV pk-pk ± 1% ± 5% 73.77%<br>SLE06S1203C01 6.0 W 12.0 V 0.5 A 200 mV pk-pk ± 1% ± 5% 78.16%<br>**----- End of picture text -----**<br>


Note: 

1. Other output voltages in the range of 5 V through 24 V are available, contact our sales reprentative for details. 

2. Measured at output connector with 20 MHz bandwidth and 0.1 μF ceramic in parallel with 10 μF electrolytic capacitors. 

3. "B" in the model number (SLE06S0503B01) indicates interchangeable blade model. "C" = N.A.fixed blade input. 

4. "03" in the model number indicates 2.5 x 5.5 x 9.5 mm straight barrel type connector. "99" indicates USB "A" port output. Other output connector options are available, please contact our sales representative for details. 

5. Power supply is not fitted with the AC blade, this is to be ordered separately. See outline drawing below for details 

6. Power supplies are not medical equipment (applied parts), medical product manufacturers take responsibility for further evaluation of class B/BF/CF compliance of their end product. 

**advancedenergy.com       3** 

**SLE06** 

## **MECHANICAL DRAWINGS** 

**==> picture [452 x 210] intentionally omitted <==**

**----- Start of picture text -----**<br>
Interchangeable AC Blade Options<br>DC Cable [(*3)] UL2468 22AWG 1,800mm, 2.5mm x 5.5mm x 9.5 mm ,<br>center “+”<br>Connector [(*4)] USB 2.0 port for 5V ( PIN1 "+", PIN4 "-", PIN 2&3 shorted)<br>US/Japan > b Europe UK @ @ Australia China<br>iT 42.50±1.0 i 30.7±1.0 ————S|i * Blades sold separately , use "KT" number above for ordering<br>2. i — ca | ‘Y} a i<br>ee RE<br>2) a =—— 73.50±0. 5 L |<br>Pare Ss 1 5 00±10% a<br>Unit: mm<br>0.05<br>ø5.5±<br>73.50±1.0<br>33.00<br>42.50±0.5<br>**----- End of picture text -----**<br>


**4 advancedenergy.com** 

**==> picture [596 x 270] intentionally omitted <==**

## **ABOUT ADVANCED ENERGY** 

Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. 

Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. 

## **TRUST** 

For international contact information, visit advancedenergy.com. 

powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 

Specifications are subject to change without notice. Not responsible for errors or omissions. ©2022 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. 

ENG-SLE06-235-01 12.08.22