RTD14012AP

General Purpose Relays PCB Relays 

**SCHRACK** 

## **Power PCB Relay RT1-AP** 

## n **1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact** 

> n **Sensitive coil 400mW** 

> n **5kV/10mm coil-contact, reinforced insulation** 

> n **Ambient temperature 85°C** 

> n **WG version: product in accordance to IEC 60335-1** 

## Typical applications 

Boiler control, timers, garage door control, POS automation, interface modules 

F0144-C 

## V Z b 

|~~**Approvals**~~||||
|---|---|---|---|
|VDE REG.-Nr. 6106, UL E214025, cCSAus 14385||||
|Technical data of approved types on request|Technical data of approved types on request|||
|~~**Contact Data**~~||~~**12A**~~|~~**16A**~~|
|Contact arrangement|1 form C (CO) or 1 form A (NO)|||
|Rated voltage|||250VAC|
|Max. switching voltage|||400VAC|
|Rated current||12A|16A|
|Limiting continuous current||12A|16A, UL: 20A|
|Limiting making current||||
|max. 4s, duty factor 10%||25A|30A|
|Breaking capacity max.|3000VA||4000VA|
|Contact Material||AgNi 90/10||
|Frequency of operation, with/without load|Frequency of operation, with/without load|360/72000h-1||
|Operate/release time max., DC coil|||8/6ms|
|Bounce time max., DC coil, form A/form B||Bounce time max., DC coil, form A/form B|4/6ms|



|~~**Coil Data**~~|~~**Coil Data**~~|||||
|---|---|---|---|---|---|
|Coil voltage range|Coil voltage range|||5 to 110VDC||
|Operative range, IEC 61810||||2||
|Coil insulation system according UL|||Coil insulation system according UL|class F||
|**Coil versions, DC coil**||||||
|Coil|Rated|Operate|Release|Release<br>Coil|Rated coil|
|code|voltage|voltage|voltage|resistance|power|
||VDC|VDC|VDC|Ω±10%|mW|
|005|5|3.5|0.5|62|403|
|006|6|4.2|0.6|90|400|
|009|9|6.3|0.9|200|400|
|012|12|8.4|1.2|360|400|
|024|24|16.8|2.4|1440|400|
|048|48|33.6|4.8|5520|417|



All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 

~~a~~ **Contact ratings** 33 COll operating range DC Type Contact Load Cycles ie ee **IEC 61810** RT314 DC-coil  A (NO) 16A, 250VAC, cos φ =1, 85°C 30x10[3] 226}—_ — 16 Aversion—_| RT314 DC-coil  C (CO) 16A, 250VAC, cos φ =1, 85°C 10x10[3] 259, ~~ || RT314 DC-coil  A (NO) 10A, 400VAC, cos φ =1, 85°C 150x10[3] SSS. RT114 DC-coil  A (NO) 12A, 250VAC, cos φ =1, 85°C 50x10[3] RT114 AC-coil  A (NO) 12A, 250VAC, cos φ =1, 70°C 100x10[3] ~~TTT~~ **UL 508** 8 yp, 16 “SES RT314 A/B (NO/NC)  20A, 250VAC, general purpose, 85°C  6x10[3] Fr-—} | — Feeermended! RT334 A (NO) 16A, 250VAC, gen. purpose, 85°C 50x10[3] 101Uns [| voltage range| | ~~$e~~ RT314 **EN60947-5-1** A (NO) 1hp, 240VAC, 40°C 1x10[3] wees0 +20 ~~|~~ +40 (rd+60 +80 +100 ~~ee~~ RT314 DC-coil  A/B (NO/NC)  2A, 24VDC, DC13 6.050 SO155-CA Ambient temperature [°C] **EN60730-1** RT314 DC-coil  A (NO) 12(2)A, 250VAC, 85°C 100x10[3] ~~**Insulation Data**~~ Mechanical endurance >30x10[6] operations Initial dielectric strength between open contacts 1000Vrms aon aX: DC load breaking capaci between contact and coil 5000Vrms ~~A~~ iy Eeetrical—————_——==endurance et Clearance/creepage between contact and coil ≥10/10mm 100 ~~Dd~~ Material group of insulation parts IIIa oeo ~~t~~ ioFNJAgNi90/10 Sse — 12/16 A ~~a~~ Tracking index of relay base PTI 250V 

1 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 

04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

General Purpose Relays PCB Relays 

**SCHRACK** 

## **Power PCB Relay RT1-AP** (Continued) 

|~~**Other Data**~~|||
|---|---|---|
|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content||
||refer to the Product Compliance Support Center at||
||www.te.com/customersupport/rohssupportcenter||
|China RoHS compliance|China RoHS compliance<br>no hazardous material over threshold||
|Resistance to heat and fire|||
|WG version||according EN60335, par30|
|Ambient temperature||-40 to 85°C|
|Category of environmental protection|||
|IEC 61810|RTII - flux proof, RTIII - wash tight||
|Vibration resistance (functional),|||
|form A/form B contact, 30 to 500Hz||20g/5g|
|Shock resistance (destructive)||100g|
|Terminal type||PCB-THT, plug-in|
|Weight||14g|
|Resistance to soldering heat  THT, IEC 60068-2-20|||
|RTII||270°C/10s|
|RTIII||260°C/5s|
|Packaging/unit||tube/20 pcs., box/500 pcs.|



~~**Accessories**~~ For details see datasheet Accessories Industrial Power Relay RT NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. 

## **Dimensions** 

**==> picture [20 x 4] intentionally omitted <==**

**----- Start of picture text -----**<br>
S0272-BB<br>**----- End of picture text -----**<br>


**PCB layout / terminal assignment** Bottom view on solder pins 

*) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. 

**==> picture [490 x 233] intentionally omitted <==**

**----- Start of picture text -----**<br>
12 A, pinning 3.5 mm 12 A, pinning 5 mm 16 A, pinning 5 mm<br>1,3 2,52'| G13 [2,52 1,3 2,52<br>EEEig oo J d o} gitglo ob<br>ot rt EERE BCE<br>fee Ra ee<br>i.| BN n eed IN rigorsfeerer IN&<br>Lg 22,65"? | 22.65%?<br>S0418-CB S0418-CN S0418-CA<br>1 form C (CO) contact 1 form C (CO) contact 1 form C (CO) contact<br>1OAl ' 1OAl ! 1OAl !<br>H H H H H i<br>19 A2 i S0163-BG 10 A2 ! S0163-BC 1 9A2 ! S0163-BE<br>12 11 14 12 11 14 12 11 «+14<br>1 form A (NO) contact 1 form A (NO) contact 1 form A (NO) contact<br>'OAI ' 1OAl ! 1OAl !<br>HH<br>t 1oe reoA2 HH oeH1  eeoO A2 Hi H1a reQA2 H:<br>S0163-BH S0163-BD S0163-BF<br>**----- End of picture text -----**<br>


Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

2 

04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 

General Purpose Relays PCB Relays 

**SCHRACK** 

## **Power PCB Relay RT1-AP** (Continued) 

|**Product code structure**|**Product code structure**|Typical product code|**RT**|**3**|**1**|**4**|**024**|**AP**|
|---|---|---|---|---|---|---|---|---|
|**Type**|||||||||
|**RT**|Power PCB Relay RT1||||||||
|**Version**|||||||||
|**1**<br>**2**<br>**3**|12A, pinning 3.5mm, flux proof<br>12A, pinning 5mm, flux proof *)<br>16A, pinning 5mm, flux proof||||||||
|**B**|12A, pinning 3.5mm, wash tight||||||||
|**D**|16A, pinning 5mm, wash tight||||||||
|**Contact arrangement**|||||||||
|**1**|1 form C (CO) contact||||||||
|**3**|1 form A (NO) contact||||||||
|**Contact material**|||||||||
|**4**|AgNi 90/10||||||||
|**Coil**|||||||||
|Coil code: please refer to coil versions table|||||||||
|**Version**|||||||||
|**AP**|**AP**<br>Standard version||||||||
|**WGAP**Product in accordance with IEC 60335-1 (domestic appliances)|||||||||



*) Wash tight version on request 

|**Product code**<br>**Version**<br>**Contacts**<br>**Contact material**<br>**Coil**<br>**Version**<br>**Part number**|**Product code**<br>**Version**<br>**Contacts**<br>**Contact material**<br>**Coil**<br>**Version**<br>**Part number**|**Product code**<br>**Version**<br>**Contacts**<br>**Contact material**<br>**Coil**<br>**Version**<br>**Part number**|**Product code**<br>**Version**<br>**Contacts**<br>**Contact material**<br>**Coil**<br>**Version**<br>**Part number**|**Product code**<br>**Version**<br>**Contacts**<br>**Contact material**<br>**Coil**<br>**Version**<br>**Part number**|**Product code**<br>**Version**<br>**Contacts**<br>**Contact material**<br>**Coil**<br>**Version**<br>**Part number**|**Product code**<br>**Version**<br>**Contacts**<br>**Contact material**<br>**Coil**<br>**Version**<br>**Part number**|
|---|---|---|---|---|---|---|
|RT114024AP<br>RT134024AP<br>RT214024AP<br>RT234024AP<br>RT314012AP<br>RT314012WGAP<br>RT314024AP<br>RT314048AP<br>RT334012AP<br>RT334024AP<br>RTD14012AP<br>RTD14024AP<br>RTD34012AP<br>RTH34012AP<br>RTH34012WGAP|12A, pinning 3.5mm,<br>flux proof|1 form C (CO)|AgNi 90/10|24VDC|standard|1-1649326-5<br>3-1649326-3<br>1-1649327-5<br>3-1649327-3<br>1-1649328-3<br>5-1833002-0<br>1-1649328-5<br>1-1649328-6<br>3-1649328-1<br>3-1649328-3<br>1649328-4<br>1649328-6<br>2-1649328-2<br>1-1649357-3<br>5-1833004-0|
|||1 form A (NO)|||||
||flux proof<br>12A, pinning 5mm,<br>flux proof|1 form C (CO)|||||
|||1 form A (NO)|||||
||flux proof<br>16A, pinning 5mm,<br>flux proof|1 form C (CO)<br>contact||12VDC|||
||||||IEC60335-1 compliant||
|||||24VDC|standard||
|||||48VDC|||
|||1 form A (NO)<br>contact||12VDC|||
|||||24VDC|||
||16A, pinning 5mm,<br>wash tight|1 form C (CO)<br>contact||12VDC|||
|||||24VDC|||
|||||12VDC|||
||16A, 105°C, 5mm,<br>wash tight|1 form A (NO)<br>contact|||||
||||||IEC60335-1 compliant||
|This list represents the most common types and does not show all variants covered by this datasheet.<br>Other types on request|||||||



This list represents the most common types and does not show all variants covered by this datasheet. 

Other types on request 

3 

Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 

Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 

04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company 

Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions