RPSG-160-12

> 160W Single Output Medical Type **RPS - 160 series** MEAN WELL ~~seenee~~ reer rere ee ree ee ee 

## ■ 

## **RPS G 160 12** 

## **G: With 5Vsb & no load power consumption < 0.75 W Blank: Basic function (without 5Vsb)** 

## **SPECIFICATION** 

|**SPECIFICATION**<br>~~+~~® AW<br>CBCE|**SPECIFICATION**<br>~~+~~® AW<br>CBCE|||~~+~~®|® AW|CBCE|
|---|---|---|---|---|---|---|
|**RPS**<br>**-160-5**<br>□<br>**RPS**<br>**-160-12**<br>□<br>**RPS**<br>**-160-15**<br>□<br>**RPS**<br>**-160-24**<br>□<br>**RPS**<br>**-160-48**<br>□<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT (20.5CFM)**<br>**RATED POWER (convection) Note.7**<br>**CURRENT RANGE (20.5CFM)**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.6**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**Note.9**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**REMOTE SENSE**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**OVER TEMPERATURE**<br>**AC CURRENT (Typ.)**<br>5V<br>12V<br>15V<br>24V<br>48V<br>30A<br>12.9A<br>10.3A<br>6.5A<br>3.25A<br>0 ~ 20A<br>0 ~ 30A<br>0 ~ 9.1A<br>0 ~ 12.9A<br>0 ~ 7.3A<br>0 ~ 10.3A<br>0 ~ 4.6A<br>0 ~ 2.3A<br>0 ~ 6.5A<br>0 ~ 3.25A<br>103W<br>155W<br>112.2W<br>159.8W<br>112.5W<br>159.5W<br>113.4W<br>113.4W<br>161W<br>161W<br>100mVp-p<br>100mVp-p<br>120mVp-p<br>150mVp-p<br>250mVp-p<br>CH1:4.5 ~ 5.5V<br>CH1:10.8 ~ 13.2V<br>CH1:13.5 ~ 16.5V<br>CH1:22 ~ 27V<br>CH1:43.2 ~ 52.8V<br>±4.0%<br>±3.0%<br>±3.0%<br>±2.0%<br>±2.0%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>1800ms, 30ms/230VAC           3500ms, 30ms/115VAC at full load<br>90 ~ 264VAC          127 ~ 370VDC<br>16ms/230VAC/115VAC at full load<br>47 ~ 63Hz<br>PF>0.93/230VAC          PF>0.98/115VAC at full load<br>85%<br>87%<br>87%<br>87%<br>88%<br>2A/115VAC          1.1A/230VAC<br>COLD START 35A/115VAC          70A/230VAC<br>105 ~ 135% rated output power<br>5.75 ~ 6.75V<br>13.8 ~ 16.2V<br>17.25 ~ 20.25V<br>27.6 ~ 32.4V<br>55.2 ~ 64.8V<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>Protection type : Shut down o/p voltage, re-power on to recover<br>TSW2: Shut down o/p voltage, re-power on to recover<br>TSW1: Shut down o/p voltage, recovers automatically after temperature goes down<br>ANSI/AAMI ES60601-1, TUV EN60601-1 approved<br>-20 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>5 ~ 15V<br>20 ~ 90% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:4KVAC     I/P-FG:2KVAC     O/P-FG:1.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**SAFETY &**<br>**EMC**<br>**(Note 4)**<br>**PROTECTION**<br>**ENVIRONMENT**<br>**CURRENT RANGE (convection)**<br>**RIPPLE & NOISE (max.) Note.2**<br>**RATED POWER (20.5CFM) Note.8**<br>**VOLTAGE TOLERANCE Note.3**<br>**POWER GOOD / POWER FAIL**<br>Power on: PS-ON = "Hi" or " > 2 ~ 5V" ;  Power off: PS-ON = "Low" or " < 0 ~ 0.5V"<br>500ms>PG>10ms          PF>1ms<br>**FUNCTION**<br>Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A<br>230.5K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>127*76.2*34.6mm (L*W*H)<br>**PACKING**<br>0.32Kg; 36pcs/12.5Kg/0.79CUFT<br>**NOTE**<br>℃<br>**PS-ON INPUT SIGNAL (G model)**<br>**5V STANDBY (G model)**<br>5VSB : 5V@0.6A without fan, 0.8A with fan 20.5CFM ; tolerance<br>2%, ripple : 50mVp-p(max.)<br>±<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>Earth leakage current < 200 A/264VAC , Touch current < 100 A/264VAC<br>μ<br>μ<br>**ISOLATION LEVEL**<br>Primary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated load and 25 _of ambient temperature.<br>2. Ripple & noise are measured at20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>: includes set up tolerance, line regulation and load regulation.<br>4. The power supply is considered a componentwhich will be installed intoa final equipment. Allthe EMC tests are been executed by mounting the uniton<br>a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to<br>perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)<br>5. HS1,HS2 & HS3 can not be shorted.<br>6. Derating may be needed under low input voltages. Please check the derating curve for more details.<br>7. The rated power includes 5Vsb @ 0.6A.<br>8. The rated power includes 5Vsb @<br>0.8A.<br>9. Touch current was measured from primary input to DC output.||**RPS**<br>**-160-5**<br>□|**RPS**<br>**-160-12**<br>□|**RPS**<br>**-160-15**<br>□|**RPS**<br>**-160-24**<br>□|**RPS**<br>**-160-48**<br>□|
||**DC VOLTAGE**|5V|12V|15V|24V|48V|
||**RATED CURRENT (20.5CFM)**|30A|12.9A|10.3A|6.5A|3.25A|
||**CURRENT RANGE (convection)**|0 ~ 20A|0 ~ 9.1A|0 ~ 7.3A|0 ~ 4.6A|0 ~ 2.3A|
||**CURRENT RANGE (20.5CFM)**|0 ~ 30A|0 ~ 12.9A|0 ~ 10.3A|0 ~ 6.5A|0 ~ 3.25A|
||**RATED POWER (convection) Note.7**|103W|112.2W|112.5W|113.4W|113.4W|
||**RATED POWER (20.5CFM) Note.8**|155W|159.8W|159.5W|161W|161W|
||**RIPPLE & NOISE (max.) Note.2**|100mVp-p|100mVp-p|120mVp-p|150mVp-p|250mVp-p|
||**VOLTAGE ADJ. RANGE**|CH1:4.5 ~ 5.5V|CH1:10.8 ~ 13.2V|CH1:13.5 ~ 16.5V|CH1:22 ~ 27V|CH1:43.2 ~ 52.8V|
||**VOLTAGE TOLERANCE Note.3**|±4.0%|±3.0%|±3.0%|±2.0%|±2.0%|
||**LINE REGULATION**|±0.5%|±0.5%|±0.5%|±0.5%|±0.5%|
||**LOAD REGULATION**|±1.0%|±1.0%|±1.0%|±1.0%|±1.0%|
||**SETUP, RISE TIME**|1800ms, 30ms/230VAC           3500ms, 30ms/115VAC at full load|||||
||**HOLD UP TIME (Typ.)**|16ms/230VAC/115VAC at full load|||||
||**VOLTAGE RANGE**<br>**Note.6**|90 ~ 264VAC          127 ~ 370VDC|||||
||**FREQUENCY RANGE**|47 ~ 63Hz|||||
||**POWER FACTOR (Typ.)**|PF>0.93/230VAC          PF>0.98/115VAC at full load|||||
||**EFFICIENCY (Typ.)**|85%|87%|87%|87%|88%|
||**AC CURRENT (Typ.)**|2A/115VAC          1.1A/230VAC|||||
||**INRUSH CURRENT (Typ.)**|COLD START 35A/115VAC          70A/230VAC|||||
||**LEAKAGE CURRENT**<br>**Note.9**|Earth leakage current < 200 A/264VAC , Touch current < 100 A/264VAC<br>μ<br>μ|||||
||**OVERLOAD**|105 ~ 135% rated output power<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed|||||
||**OVER VOLTAGE**|5.75 ~ 6.75V<br>13.8 ~ 16.2V<br>17.25 ~ 20.25V<br>27.6 ~ 32.4V<br>55.2 ~ 64.8V<br>Protection type : Shut down o/p voltage, re-power on to recover|||||
||**OVER TEMPERATURE**|TSW2: Shut down o/p voltage, re-power on to recover<br>TSW1: Shut down o/p voltage, recovers automatically after temperature goes down|||||
||**5V STANDBY (G model)**|5VSB : 5V@0.6A without fan, 0.8A with fan 20.5CFM ; tolerance<br>2%, ripple : 50mVp-p(max.)<br>±|||||
||**PS-ON INPUT SIGNAL (G model)**|Power on: PS-ON = "Hi" or " > 2 ~ 5V" ;  Power off: PS-ON = "Low" or " < 0 ~ 0.5V"|||||
||**POWER GOOD / POWER FAIL**|500ms>PG>10ms          PF>1ms|||||
||**REMOTE SENSE**|5 ~ 15V|||||
||**WORKING TEMP.**|-20 ~ +70<br>(Refer to "Derating Curve")<br>℃|||||
||**WORKING HUMIDITY**|20 ~ 90% RH non-condensing|||||
||**STORAGE TEMP., HUMIDITY**|-40 ~ +85<br>, 10 ~ 95% RH<br>℃|||||
||**TEMP. COEFFICIENT**|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)|||||
||**VIBRATION**|10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes|||||
||**SAFETY STANDARDS**|ANSI/AAMI ES60601-1, TUV EN60601-1 approved|||||
||**ISOLATION LEVEL**|Primary-Secondary: 2xMOPP, Primary-Earth:1xMOPP, Secondary-Earth:1xMOPP|||||
||**WITHSTAND VOLTAGE**|I/P-O/P:4KVAC     I/P-FG:2KVAC     O/P-FG:1.5KVAC|||||
||**ISOLATION RESISTANCE**|I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃|||||
||**EMC EMISSION**|Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3|||||
||**EMC IMMUNITY**|Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A|||||
||**MTBF**|230.5K hrs min.      MIL-HDBK-217F (25<br>)<br>℃|||||
||**DIMENSION**|127*76.2*34.6mm (L*W*H)|||||
||**PACKING**|0.32Kg; 36pcs/12.5Kg/0.79CUFT|||||
||℃<br>1. All parameters NOT specially mentioned are measured at230VAC input, rated load and 25 _of ambient temperature.<br>2. Ripple & noise are measured at20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>: includes set up tolerance, line regulation and load regulation.<br>4. The power supply is considered a componentwhich will be installed intoa final equipment. Allthe EMC tests are been executed by mounting the uniton<br>a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to<br>perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)<br>5. HS1,HS2 & HS3 can not be shorted.<br>6. Derating may be needed under low input voltages. Please check the derating curve for more details.<br>7. The rated power includes 5Vsb @ 0.6A.<br>8. The rated power includes 5Vsb @<br>0.8A.<br>9. Touch current was measured from primary input to DC output.||||||



_File Name:RPS-160-SPEC   2015-08-06_ 

## 160W Single Output Medical Type 

## **RPS - 160 series** 

**==> picture [511 x 668] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mechanical Specification Unit:mm<br>FAN<br>AC Input Connector (CN1) : JST B3P-VH or equivalent<br>20.5CFM min. Pin No. Assignment Mating Housing Terminal<br>1 AC/L<br>JST VHR JST SVH-21T-P1.1<br>2 No Pin<br>M1 SVR1 CN3 3 AC/N or equivalent or equivalent<br>HS1 1<br>2<br>3 DC Output Connector (CN2) : JST B8P-VH or equivalent<br>4<br>Pin No. Assignment Mating Housing Terminal<br>1<br>2 1,2,3,4 +V JST VHR JST SVH-21T-P1.1<br>FS1 HS2 3 5,6,7,8 -V or equivalent or equivalent<br>4<br>1 5<br>CN1FS2 23 HS3 678 Power Good Connector(CN3):JST B4B-XH or equivalentPin No. Status Mating Housing Terminal<br>CN2 CN901 1 PG<br>M2 CN901 LED 2 GND JST XHP JST SXH-001T-P0.6<br>1 2 3 4 3 -S or equivalent or equivalent<br>5 117 4 +S<br>127 5VSB Connector(CN901) : JST B-XH or equivalent<br>PS/ON Pin No. Assignment Mating Housing Terminal<br>1 PS/ON<br>5mA(max.) 2,4 GND JST XHP JST SXH-001T<br>or equivalent or equivalent<br>3 5VSB<br>GND<br>: Grounding Required<br>1.HS1,HS2,HS3 cannot be shorted.<br>2.M1 is safety ground. For better EMC<br>performance,Please secure an electrical<br>connection between M1,M2, and chassis<br>grounding.<br>Block Diagram<br>+5VSB fosc :100KHz(5V)<br>DETECTION 70KHz(12~48V)<br>CIRCUIT<br>POWER SWITCHING RECTIFIERS& +5VSB<br>PWM CONTROL FILTER<br>+S<br>EMI RECTIFIERS POWER RECTIFIERS +V<br>I/P & &<br>FILTER SWITCHING -V<br>PFC FILTER<br>-S<br>PG PG<br>FG DETECTION<br>CIRCUIT<br>O.L.P. CONTROL<br>O.V.P.<br>PS/ON PS/ON<br>CONTROL<br>Derating Curve Output Derating VS Input Voltage<br>100<br>100<br>With FAN<br>90<br>80<br>80<br>60 70<br>Without FAN 60<br>40<br>50<br>20<br>40<br>-20 0 10 20 30 40 50 60 70 (HORIZONTAL) 90 95 100 115 120 140 160 180 200 220 240 264<br>AMBIENT TEMPERATURE ( ℃ ) INPUT VOLTAGE (VAC) 60Hz<br>4-<br>ψ<br>3.5<br>LOAD (%) LOAD (%)<br>76.2 66.2<br>34.6<br>3 max.<br>5cm<br>5<br>**----- End of picture text -----**<br>


_File Name:RPS-160-SPEC 2015-08-06_