RAC01-3.3SGB

Features • Universal input 85-264VAC • <250mW No load power consumption • Class II installations (without FG) **AC/DC Converter** Regulated • -25°C to +80°C Operating temperature, with derating • Continuous SCP, OCP Converter • IEC/EN60950 & IEC/EN/UL62368 certified **RAC01-GB** ee ~~—_~~ Description **1 Watt** ~~LC~~ ~~ ) The RAC01-GB series are low cost AC/DC power supplies, ideal for PCB mounted, XN Yarran compact, board level industrial applications. They feature universal AC input voltage range, **Single** regulated and short-circuit-proof isolated DC outputs, low standby power consumption and -25°C to +80°C operating temperature range. The RAC01-GB have a built-in Class B / FCC Part 15 EMC **Output** filter, are certified to EN60950 and EN62368 safety standards and come with a three year warranty. 

## **Single Output EMC Class B** 

## Selection Guide 

|Part|Input|Output|Output|Efficiency|Max. Capacitive|
|---|---|---|---|---|---|
|Number|Voltage Range|Voltage|Current|typ|Load(1)|
||[VAC]|[VDC]|[mA]|[%]|[µF]|
|RAC01-3.3SGB|85-264|3.3|303|63|500|
|RAC01-05SGB|85-264|5|200|63|500|
|RAC01-12SGB|85-264|12|83|68|200|
|RAC01-24SGB|85-264|24|42|63|200|



~~ee~~ Notes: Note1:  Measured with all input voltages at +25°C with constant resistant mode at full load 

**E196683** ; 

## Model Numbering 

## RAC01-__ SGB 

ULIEC/EN60950-1 certified UL/IEC/EN62368-1 certified CAN/CSA-C22.2 No. 62368 certified IEC/EN62368-1 certified CB Report 

**==> picture [245 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
nom. Output Power EMC Class B<br>nom. Output Voltage S ingle<br>Ordering Examples:<br>RAC01-12SGB  12Vout  Single Output  EMC Class B<br>**----- End of picture text -----**<br>


REV.:  1/2018 

PA-1 

**www.recom-power.com** 

**RAC01-GB Series** 

**AC/DC Converter** 

~~LT~~ Specifications (measured @ Ta= 25°C, nom. Vin (115/230VAC), full load and after warm-up unless otherwise stated) 

BASIC CHARACTERISTICS ~~a eS~~ Parameter Condition Min. Typ. Max. ~~SS~~ Internal Input Filter Pi-type ~~a~~ Input Voltage Range[(2,3,4)] nom. Vin = 230VAC 85VAC 230VAC 264VAC 115VAC 25mA 30mA Input Current 230VAC 18mA 20mA ~~a~~ 115VAC 30A Inrush Current cold start at +25°C 230VAC 40A ~~eea~~ No load Power Consumption ~~ee ee~~ 180mW ~~ee~~ 250mW ~~a~~ Input Frequency Range 47Hz 63Hz Minimum Load 0% ~~a~~ 115VAC 0.5 Power Factor 230VAC 0.38 ~~a~~ 115VAC 250ms 2s Start-up Time 230VAC 200ms 2s ~~eeee~~ 115VAC 20ms Hold-up time 230VAC 80ms ~~eea~~ Internal Operating Frequency 100% load at nominal Vin ~~**ee**~~ 65kHz ~~ee~~ 3.3Vout 100mVp-p 5Vout 100mVp-p 0°C to 80°C 12Vout 200mVp-p 24Vout 240mVp-p Output Ripple and Noise 20MHz BW 3.3Vout 200mVp-p 5Vout 200mVp-p -25 °C to 0°C 12Vout 300mVp-p 24Vout 300mVp-p 

## Notes: 

Note2:  No proper operation with DC input voltage Note3:  The products were submitted for safety files at AC-Input operation Note4: Refer to line derating graph on page 4 

Efficiency vs. Load 

**==> picture [473 x 206] intentionally omitted <==**

**----- Start of picture text -----**<br>
RAC01-05SGB RAC01-12SGB<br>100 100<br>90 A 90<br>80 PF | Pt | | Tt 80 Pp |e tT | | TT<br>70 70<br>| | | | dT dT TT | | | | | | dT hd|cdPr<br>60 eee. eer 60 mi<br>50 i eee 50 eee eee<br>40 40<br>115VAC 115VAC<br>30 fe 30 fae<br>230VAC 230VAC<br>20 2seeeee 20  oe<br>10 10<br>Ai} | | | | tt Ai | | | hd} TT tt<br>0 0<br>PCOPPPT Te) Ae<br>0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100<br>Output Load [%] Output Load [%]<br>Efficiency [%] Efficiency [%]<br>**----- End of picture text -----**<br>


REV.:  1/2018 

PA-2 

**www.recom-power.com** 

**AC/DC Converter** 

**Series** 

## **RAC01-GB** 

~~LT~~ Specifications (measured @ Ta= 25°C, nom. Vin (115/230VAC), full load and after warm-up unless otherwise stated) REGULATIONS ~~a~~ Parameter Condition Value ~~ee a~~ Output Accuracy -25°C to +80°C ±6.0% max. ~~a~~ Line Regulation -25°C to +80°C ±2.0% max. ~~a~~ Load Regulation -25°C to +80°C 6.0% max. Deviation vs. Load RAC01-05SGB RAC01-12SGB 6 6 4 4 115VAC 115VAC 2 ~~SCE 230VAC +E~~ 2 ~~CEE 230VAC~~ 0 ~~NSHP LE~~ 0 ~~SES~~ -2 -2 ~~Gab ~Sanee eft} y ttrere ef) Peo aaa~~ -4 -4 -6 -6 PET TEE Ey SeERReeeee 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 

PROTECTIONS ~~a ee~~ Parameter Type Value ~~ee~~ Input Fuse[(5)] internal fusible resistor, 1 W /1W ~~ee~~ Short Circuit Protection (SCP) below 100m W continuous, auto recovery Over Voltage Category OVCII 3.3Vout 0.33A - 0.60A 5Vout 0.22A - 0.50A Over Current Protection (OCP) hiccup mode 12Vout 0.09A - 0.25A 24Vout 0.05A - 0.14A ~~PF a~~ Class of Equipment Class II ~~a~~ Isolation Voltage[(6)] I/P to O/P rated for 1 minute 3kVAC Isolation Resistance 100M W min. ~~ee ee~~ Isolation Capacitance 1nF Insulation Grade reinforced ~~ee ee~~ Leakage Current I/P to O/P 0.25mA max. 

Notes: 

Note5:  Refer to local safety regulations if input over-current protection is also required Note6: For repeat Hi-Pot testing, reduce the time and/or the test voltage 

Note7: For operation at 230VAC, an external MOV is recommended. The Varistor should comply with IEC-61051-2.   e.g. EPCOS S14 series 

## Protection Circuit 

**==> picture [265 x 76] intentionally omitted <==**

**----- Start of picture text -----**<br>
L N<br>FUSE<br>+VOUT<br>U<br>-VOUT<br>**----- End of picture text -----**<br>


REV.:  1/2018 

PA-3 

**www.recom-power.com** 

**RAC01-GB Series** 

**AC/DC Converter** 

~~LS~~ Specifications (measured @ Ta= 25°C, nom. Vin (115/230VAC), full load and after warm-up unless otherwise stated) ENVIRONMENTAL Parameter Condition Value ~~a~~ full load -25°C to +70°C Operating Temperature Range @ natural convection 0.1m/s ~~a~~ refer to derating graph -25°C to +80°C Maximum Case Temperature +120°C Temperature Coefficient 0.03%/K ~~ee eseen a~~ Operating Altitude[(8)] 4000m ~~a~~ Operating Humidity non-condensing 10% - 95% RH max. Pollution Degree PD2 ~~a~~ Shock 10-150Hz, 2G 10min./1cycle, period 60min. each along x,y,z axes ~~a~~ Vibration according to MIL-STD-202G 20G/11ms pulse, 3 times at each x, y, z axes +25°C 1691 x 10[3] hours MTBF[(9)] according to MIL-HDBK-217F, method 2 +70°C 424 x 10[3] hours ~~ee~~ 

Notes: Note8:   Recognized by UL for safe operation up to 4000m. High altitude operation may impact the performance and lifetime. Contact  TechsupportAT@RECOM-POWER.com for advice Note9:   Based on calculation for 5Vout 

## Derating Graph 

(@ Chamber and natural convection 0.1m/s) 

Line Derating 

**==> picture [459 x 190] intentionally omitted <==**

**----- Start of picture text -----**<br>
100 100<br>90 a 90 Z7LL LTT<br>80 80<br>70 70<br>60 60<br>5040 eea es 5040 ase<br>30 ee 30 ee<br>20<br>20<br>10 FERRE SER 10 FERRERS<br>0<br>a 0 TEP PrPryryryT<br>-25 -10 5 20 35 50 65 80 95<br>70 85 90 264<br>Ambient Temperature [°C]<br>Input Voltage [VAC]<br>Output Load [%] Output Load [%]<br>**----- End of picture text -----**<br>


|SAFETY AND CERTIFICATIONS|SAFETY AND CERTIFICATIONS|SAFETY AND CERTIFICATIONS|
|---|---|---|
|Certificate Type(Safety)|Report / File Number|Standard|
|Information Technology Equipment, General Requirements for Safety|E196683-A5|UL60950-1, 2nd Edition 2014<br>CAN/CSA-C22.2 No. 60950-1, 2nd Edition 2015|
|Information Technology Equipment, General Requirements for Safety|16BAS10048 11<br>SA1804152L01001|IEC60950-1:2005 2nd Edition + Am2:2013<br>EN60950-1:2006 + A2:2013|
|Information Technology Equipment, General Requirements for Safety<br>(CB Scheme)|16BAS10048 11|IEC60950-1:2005 2nd Edition + Am2:2013|
|continued on nextpage|||



continued on next page 

REV.:  1/2018 

PA-4 

**www.recom-power.com** 

**RAC01-GB Series** 

**AC/DC Converter** 

|Specifications (measured @ Ta= 25°C, nom. Vin (115/230VAC), full load and after warm-up unless otherwise stated)<br>~~LT~~|(measured @ Ta= 25°C, nom. Vin (115/230VAC), full load and after warm-up unless otherwise stated)<br>~~LT~~<br>~~a~~|(measured @ Ta= 25°C, nom. Vin (115/230VAC), full load and after warm-up unless otherwise stated)<br>~~LT~~|
|---|---|---|
|Certificate Type(Safety)<br>~~a~~|Report / File Number<br>~~a~~<br>~~a~~|Standard<br>~~a~~|
|Audio/Video, information and communication technology equipment - Part1:<br>Safetyrequirements<br>~~a~~<br>~~ee~~|E196683-A5<br>E196683-A6001<br>~~a~~<br>~~a~~<br>~~ee~~|UL62368-1, 2nd Edition<br>CAN/CSA-C22.2 No. 62368-1-14<br>~~a~~<br>~~ee~~|
|Audio/Video, information and communication technology equipment - Part1:<br>Safetyrequirements<br>~~ee~~|16BCS1004811<br>~~ee~~|IEC62368-1:2014 2nd Edition<br>EN62368-1:2014+A11:2017<br>~~ee~~|
|Audio/Video, information and communication technology equipment - Part1:<br>Safetyrequirements(CB Scheme)<br>~~ee~~|SA1804152S 001<br>~~ee~~|IEC62368-1:2014 2nd Edition<br>~~ee~~|
|RoHS2<br>~~ee~~<br>~~a~~|~~ee~~<br>~~a~~|RoHS 2011/65/EU<br>~~ee~~<br>~~a~~|
|~~a~~<br>~~a~~|||
|EMC Compliance<br>~~a~~<br>~~—————~~|Condition<br>~~a~~|Standard / Criterion<br>~~a~~|
|Electromagnetic compatibility of multimedia equipment - Emission<br>requirements<br>~~—————~~<br>~~Bo~~|EA1804152E 01001<br>|EN55032:2015, Class B<br>|
|Information technology equipment - Immunity characteristics - Limits and<br>methods of measurement<br>~~—————~~<br>~~Bo~~||EN55024:2010+A1:2015<br>|
|ESD Electrostatic discharge immunity test<br>~~—————~~<br>~~Bo~~|Air ±2, 4, 8kV<br>Contact ±2,4kV<br>|EN61000-4-2:2009, Criteria A<br>|
|Radiated, radio-frequency, electromagnetic field immunity test<br>~~a~~|3V/m<br>~~a~~|EN61000-4-3:2006 + A2:2010, Criteria A<br>~~a~~|
|Fast Transient and Burst Immunity<br>~~a~~|AC Power Port: ±1kV<br>~~a~~|EN61000-4-4:2012, Criteria A<br>~~a~~|
|Surge Immunity<br>~~a~~<br>~~eS~~|AC Power Port: L-N ±1kV<br>~~a~~<br>~~eS~~|EN61000-4-5:2014, Criteria B<br>~~a~~<br>~~eS~~|
|Immunity to conducted disturbances, induced by radio-frequency fields<br>~~eS~~<br>~~ee~~|AC Power Port 3V<br>~~eS~~<br>~~ee~~|EN61000-4-6:2014, Criteria A<br>~~eS~~<br>~~ee~~|
|Immunity to conducted disturbances, induced by radio-frequency fields<br>~~ee~~<br>~~a~~<br>~~——————~~|50Hz, 1A/m<br>~~ee~~<br>~~a~~<br>~~——————~~|IEC61000-4-8:2009; Criteria A<br>~~ee~~<br>~~a~~<br>~~——————~~|
|Voltage Dips and Interruption<br>~~a~~<br>~~——————~~|Voltage Dips >95%<br>~~a~~<br>~~——————~~|EN61000-4-11:2004, Criteria A<br>~~a~~<br>~~——————~~|
||Voltage Dips 30%<br>~~——————~~<br>~~a~~|EN61000-4-11:2004, Criteria B<br>~~——————~~<br>~~a~~|
||Voltage Interruptions >95%<br>~~——————~~<br>~~a~~<br>~~a~~|EN61000-4-11:2004, Criteria B<br>~~——————~~<br>~~a~~<br>~~a~~|
|Limits of Voltage Fluctuations & Flicker<br>~~——————~~<br>~~a~~|~~——————~~<br>~~a~~<br>~~a~~|EN61000-3-3:2013<br>~~——————~~<br>~~a~~<br>~~a~~|



|DIMENSION AND PHYSICAL CHARACTERISTICS|DIMENSION AND PHYSICAL CHARACTERISTICS|DIMENSION AND PHYSICAL CHARACTERISTICS|
|---|---|---|
|Parameter|Type|Value|
|Material|case<br>PCB|black plastic (UL94V-2)<br>FR4(UL94V-0)|
|Dimension(LxWxH)||33.7 x 22.2 x 19.0mm|
|Weight||12gtyp.|
|continued on nextpage|||



continued on next page 

REV.:  1/2018 

PA-5 

**www.recom-power.com** 

**AC/DC Converter** 

**Series** 

## **RAC01-GB** 

~~LT~~ Specifications (measured @ Ta= 25°C, nom. Vin (115/230VAC), full load and after warm-up unless otherwise stated) 

## Dimension Drawing (mm) 

**==> picture [520 x 493] intentionally omitted <==**

**----- Start of picture text -----**<br>
33.7<br>embossed logo<br>Pin Connections<br> Pin #  Single<br>1   VAC in (L)<br> 2   VAC in (N)<br> 3   -Vout<br>2.85 15.24  4   +Vout<br>=— Tolerance:  xx.x=  ±0.5mm<br>Pin width:    ±0.05mm<br>Recommended Footprint Details<br>2.54<br>Ø0.8 [±0.03]<br>1 2 3<br>Bottom View 4 Top View 4<br>2 3 1<br>28.0 a<br>PACKAGING INFORMATION<br>Parameter Type Value<br>Packaging Dimension (LxWxH) tube 470.0 x 36.4 x 26.4mm<br>Packaging Quantity 20pcs<br>Storage Temperature Range -25°C to +85°C<br>Storage Humidity non-condensing 5% - 95% RH max.<br>22.2<br>19.0<br>±0.5<br>3.7<br>2.54<br>7.62<br>**----- End of picture text -----**<br>


The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. 

REV.:  1/2018 

PA-6 

**www.recom-power.com**