PVSE 230/48-5

Single phase, primary switched mode power supply, Economy **PVSE 230/48-5** 

## Advantages 

Stabilised and adjustable output voltage Up to 200 % real power boost for 4 seconds Top boost to trip conventional circuit breakers DC OK signalling Stand-by-input Parallel connection option Service-friendly spring-loaded connector system Optional with active inrush current limiter 

## Applications 

Primary switched mode power supply with massive power reserves focussing on the key task of power supply. 

## Simplified diagram 

## Standards Z 

Primary switched mode power supply to UL 60950, UL 508 

## Approvals W oZ 

UL/CSA 60950 recognised, UL508 listed 

Safety: EN 61558-2-16, EN 60950-1 EMC: EN 61204-3 

## Single phase, primary switched mode power supply, Economy **PVSE 230/48-5** 

Type PVSE 230/48-5 Type PVSE 230/48-5 Input Terminal and mounting Input rated voltage 110 - 240 Vac Connections input, (spring clamp terminal, max. 2.5 mm² Input rated current (rated load) 2.5 / 1.2 Aac (110 / 230 Vac) pluggable) oO Input voltage range 85 - 264 Vac (120 - 373 Vdc) oO Connections output, (spring clamp terminal, max. 2.5 mm² xe)© Rated frequency rangeStarting current limiter 44 Hz - 66 Hz / 0 Hz<8 A, active xe)i pluggable)Connections signalling, (spring clamp terminal, max. 0.5 mm² pluggable) ~~8~~ Input fuse internal 6.3 A (slow-blow) ~~§~~ Mounting position vertical ~~8~~ Recommended back-up fuse (circuit breaker) 10 A, 16 A, characteristics B, C Fixing method DIN Rail system TH 35 a Harmonic correction active 5 lw Mains buffering 24 / 24 ms (110 / 230 Vac) 5oO Measures and weights Transient surge voltage protection Varistor = Weight 1.30 kg 

|Transient surge voltage protection<br>Varistor|Transient surge voltage protection<br>Varistor|
|---|---|
|Output<br>Output rated voltage<br>48 Vdc ±1 %<br>Output voltage range<br>33 - 52 Vdc<br>~~hid~~||
|Resistance to reverse feed max.|63 Vdc|
|Output rated current|5.00 A|
|Parallel connection|Yes|
|Power Boost|10 A / 4 s (7.5 A / 8 s)|
|Overload behaviour|Constant current|
|max. Power loss idling/nominal load|7.4 / 21.6 W|
|Serial operation|Yes|
|Efficiency|typ. 91 %|
|Ripple factor|typ. 70 mVss|
|Top Boost<br>Signaling<br>Stand-by-input|30 A / 25 ms<br>Yes|
|Power Good (DC OK)|LED green, LED red|
|Potential free signal contact|Yes|
|Standards||
|Classification|Primary switched mode power supply|
|Approvals||
|Approvals|cURus, cULus|
|Environment||
|Storage temperature|-25° C to +85° C|
|Derating|-3 %/K > +50° C,<br>-1.5 %/Vac < 110 Vac|
|Ambient temperature|-10° C to +70° C|
|Safetyandprotection||
|Safety class|I, with PE connection|
|Protection index|IP 20|
|Accessory||
|Connector for signalling|PV-CON (optional)|
|Side DIN Rail mounting|PV-TS35M (optional)|
|Direct screw fastening plate for lateral mounting|PV-WB2 (optional)|
|Order numbers||
|**Order Number**|**PVSE 230/48-5**|



**==> picture [224 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
127.0<br>76.0<br>12.5<br>179.5<br>57.0<br>**----- End of picture text -----**<br>