PTVS10-086C-M

## **Features** 

n 10 kA, 8/20 µs surge capability 

## **Applications** 

n High power DC bus protection 

n 1 kA, 10/350 µs surge capability 

n Low clamping voltage under surge 

n Bidirectional TVS 

n Surface mount package 

**==> picture [487 x 22] intentionally omitted <==**

**----- Start of picture text -----**<br>
BOURNS  iT PTVS10-086C-M High Current TVS Diode<br>**----- End of picture text -----**<br>


## ~~**General Information**~~ 

The Bourns[®] Model PTVS10-086C-M high current bidirectional TVS diode is designed for use in high power DC bus clamping applications. 

The device is RoHS* compliant and is designed to meet IEC 61000-4-5 8/20 μs current surge requirements. 

## ~~**Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted)**~~ 

|**Rating**|**Symbol**|**Value**|**Unit**|
|---|---|---|---|
|Repetitive Standoff Voltage|VWM|86|V|
|Peak Current Rating per 8/20 µs IEC 61000-4-5|IPPM|10|kA|
|Peak Current Rating per 10/350 µs|IPPM|1|kA|
|Operating Junction Temperature Range|TJ|-55 to +125|°C|
|Storage Temperature Range|TS|-55 to +150|°C|



## ~~**Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)**~~ 

|**Parameter**|**Test Conditions**|**Min.**|**Typ.**|**Max.**|**Unit**|
|---|---|---|---|---|---|
|IDStandby Current|VD= VWM|||10|µA|
|V(BR) Breakdown Voltage|IBR= 10 mA|96|101|107|V|
|VCClamping Voltage1|IPP= 10 kA (8/20 µs waveshape)|||157|V|
|V(BR) Temperature Coefficient|||0.1||%/°C|
|C         Capacitance|F = 10 kHz,<br>Vd= 1 Vrms||5||nF|



Note: 

1.  VC measured at the time which is coincident with the peak surge current. 

Tel: +886-2 2562-4117 • Email: asiacus@bourns.com **Asia-Pacific: EMEA:** Tel: +36 88 520 390 • Email: eurocus@bourns.com **The Americas:** Tel: +1-951 781-5500 • Email: americus@bourns.com **www.bourns.com** 

**WARNING  Cancer and Reproductive Harm -** www.P65Warnings.ca.gov 

*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. 

Users should verify actual device performance in their specific applications. 

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 

## **PTVS10-086C-M High Current TVS Diodes** 

## ~~**Performance Graphs**~~ 

~~**V-I Characteristic**~~ 

## ~~**Typical VBR vs. Junction Temperature**~~ 

**==> picture [228 x 153] intentionally omitted <==**

## ~~**Typical Surge Current Derating**~~ 

**==> picture [228 x 144] intentionally omitted <==**

**----- Start of picture text -----**<br>
120<br>110<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>10<br>0<br>0 25 50 75 100 125 150 175<br>Ambient Temperature (°C)<br>Percent of Rated Value<br>**----- End of picture text -----**<br>


_This graph shows the typical device surge current derating versus ambient temperature when subjected to the 8/20 µs current waveform per the IEC 61000-4-5 specification. This device is not intended for continuous operation at temperatures above 125 °C._ 

**==> picture [210 x 345] intentionally omitted <==**

**----- Start of picture text -----**<br>
12<br>10<br>8 Normalized<br>6 to 25 °C<br>4<br>2<br>0<br>-2<br>-4<br>-6<br>-8<br>-10<br>-12<br>-55 -35 -15 -5 25 45 65 85 105 125<br>Junction Temperature (°C)<br>Current 8/20 µs Waveform per IEC 61000-4-5<br>120<br>Test Waveform Parameters<br>100 tt = 8 µs<br>td = 20 µs<br>80<br>60<br>40<br>td = t|IPP/2<br>20<br>0<br>0 5 10 15 20 25 30<br>t – Time (µs)<br>VBR Change vs. Temperature (%)<br>)PP<br> – Peak Pulse Current (% of I<br>IPP<br>**----- End of picture text -----**<br>


## ~~**Current 8/20 µs Waveform per IEC 61000-4-5**~~ 

## ~~**Application**~~ 

A typical application for Power TVS products includes DC power line protection. 

**==> picture [114 x 113] intentionally omitted <==**

**----- Start of picture text -----**<br>
+<br>Exposed<br>DC<br>Power<br>Interface<br>-<br>**----- End of picture text -----**<br>


Specifications are subject to change without notice. 

Users should verify actual device performance in their specific applications. 

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 

## **PTVS10-086C-M High Current TVS Diodes** 

## ~~**Product Dimensions**~~ 

This is an RoHS compliant*, molded package with 100 % Sn on the terminations, and a flammability rating of UL 94-V-0. 

**==> picture [153 x 257] intentionally omitted <==**

**----- Start of picture text -----**<br>
E<br>D<br>E1<br>A<br>C L<br>b<br>b1<br>L1 L2<br>**----- End of picture text -----**<br>


|**Dim.**|**Min.**||**Max.**|
|---|---|---|---|
|A|6.94<br>(0.273)||7.24<br>(0.285)|
|b|5.15<br>(0.203)||5.65<br>(0.222)|
|b1|10.55<br>(0.415)||11.05<br>(0.435)|
|C|0.37<br>(0.015)||0.45<br>(0.018)|
|D|13.45<br>(0.530)||14.60<br>(0.575)|
|E|17.85<br>(0.703)||18.72<br>(0.737)|
|E1|15.50<br>(0.610)||16.05<br>(0.632)|
|L|2.30<br>(0.091)||2.80<br>(0.110)|
|L1|2.50<br>(0.098)||2.90<br>(0.114)|
|L2|13.16<br>(0.518)||13.76<br>(0.518)|



## ~~**Recommended Pad Layout**~~ 

**==> picture [182 x 140] intentionally omitted <==**

**----- Start of picture text -----**<br>
2.15 2.54<br>(0.085) (0.100)<br>5.33<br>(0 .210)<br>13.72<br>(0.540)<br>10.80<br>(0.425)<br>2.70<br>(0.106)<br>18.31<br>(0.721)<br>MM<br>DIMENSIONS:<br>(INCHES)<br>**----- End of picture text -----**<br>


## ~~**Typical Part Marking**~~ 

PTVS10-086C-M .................................................................... 10086 

## ~~**How to Order**~~ 

## **PTVS 10 - 086 C-M** 

Series PTVS = Power TVS High Current Diode Peak Current Rating 10 = 10 kA Repetitive Standoff Voltage 086 =   86 V Suffix 

C =  Bidirectional Device 

M =  Surface Mount 

## ~~**Environmental Specifcations**~~ 

Moisture Sensitivity Level ................................................................1 ESD Classification (HBM)............................................................. 3B 

Mold flash or protrusion shall not exceed 0.25 mm. 

MM DIMENSIONS: (INCHES) 

Specifications are subject to change without notice. 

Users should verify actual device performance in their specific applications. 

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 

## **PTVS10-086C-M High Current TVS Diodes** 

## ~~**Packaging Information**~~ 

The product will be dispensed in tape and reel format (see diagram below). 

**==> picture [489 x 517] intentionally omitted <==**

**----- Start of picture text -----**<br>
2.00 ± 0.10<br>(.079 ± .004) (.059 +.004/-0)1.50 +0.1/-0 [DIA.]<br>4.00 ±0.10 20.00 ± 0.10 1.75 ± 0.10<br>(.157 ± .004) (.787 ± .004) (.069 ± .004)<br>14.20 ± 0.10<br>(.559 ± .004) 32.00 ± 0.30 17.80<br>(1.260 ± .012) (.701)<br>18.95<br>28.40 ± 0.10 (.746)<br>(1.118 ± .004)<br>2.00<br>(.079) [DIA.]<br>8.00 14.20<br>7.45<br>(.315) (.559)<br>(.039)<br>MM<br>DIMENSIONS:<br>(INCHES)<br>USER DIRECTION OF FEED<br>400 PCS. PER REEL<br>330.0 ± 1.5<br>(12.992 ± .059) [DIA.] 38.40<br>(1.512)<br>MAX.<br>2.2 ± 0.2<br>(.087 ± .008)<br>SEE DETAIL A 13.0 +0.5/-0.2<br>17.2 ± 0.2 (.512 +.020/-.008)<br>(.677 ± .008) DIA. 100.0 ± 1.5<br>(3.937 ± .059)<br>DIA.<br>DETAIL A<br>32.40 + 2.00/-0<br>(1.276 ±.079/-.0)<br>**----- End of picture text -----**<br>


12/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 

## **Legal Disclaimer Notice** 

This legal disclaimer applies to purchasers and users of Bourns[®] products manufactured by or on behalf of Bourns, Inc. and 

Unless otherwise expressly indicated in writing, Bourns[®] products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is and complete before placing orders for Bourns[®] products. 

The characteristics and parameters of a Bourns[®] product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications.  The characteristics and parameters of a Bourns[®] product in a user application may 

® product with other components ® 

the actual performance of the Bourns[®] 

Unless Bourns has explicitly designated an individual Bourns ® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns ® product to meet the requirements of such industry standard or particular qualification. Users of Bourns[®] products are responsible for ensuring compliance with safety-related requirements and standards applicable to 

Bourns[®] 

on a case-by-case basis, use of any Bourns[®] 

**==> picture [5 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
®<br>**----- End of picture text -----**<br>


**==> picture [6 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
®<br>**----- End of picture text -----**<br>


**==> picture [5 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
®<br>**----- End of picture text -----**<br>


- ® 

Bourns[®] 

® standard products that are suitable for use in aircraft “Applications.” Unless expressly and specifically ® standard 

the user’s sole risk. 

and the user for which such Bourns[®] custom and the user regarding the use and level of also apply to such Bourns[®] custom products. 

® custom products shall be negotiated on a case-by-case basis by Bourns are specially designed. Absent a written agreement between Bourns testing, the above provisions applicable to Bourns ® standard products shall 

Users shall not sell, transfer, export or re-export any Bourns[®] 

Bourns[®] 

regulations. Further, Bourns ® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes.  Bourns[®] products may not, without 

_bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf_