PE-1812AGC510STS
Common Mode Filter, 230mA, 3.5kohm, 51µH, 1812, 4.5mm x 3.2mm x 3.05mm, AEC-Q200, PulseChip Series
- Manufacturer: PULSE ELECTRONICS
- Product type: SMD Common Mode Chokes / Filters
| Delivery and price | |
|---|---|
| Units per pack | 2000 |
| Price | 0.27 € |
| Current stock | 10+ |
| Lead time | 30 days |
**Automotive PulseChip[TM] CAN chokes** 2-Line EMI Suppression for CAN-Bus Networks - _Features and Benefits: PulseChip design meets AEC-Q200 Requirements_ - . _Suppresses common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and higher current High-sided Metallization for improved solder join_ - _Supports CAN-Bus, A2B and other IVN high speed differential signal lines (LVDS)_ Electrical Specifications @ 25°C **==> picture [519 x 206] intentionally omitted <==** **----- Start of picture text -----**<br> |||||||||| |---|---|---|---|---|---|---|---|---| |Common Mode Impedance| |Part Number|(10MHz)|Inductance|Standard|RDC|IDC|Isolation Resistance|Rated Voltage| |(uH)|Tolerance|(Ω Max)|(mA MAX)|(M Ω) Min|(V) Max| |Hy;|Min|Typ||||||||| |PE-1210AGCXXXSTS|Operating Temperature Range -40°C to +125°C| |PE-1210AGC110STS|300|550|11|+/-30%|0.4|300|10|80| |a|ee|es ee| |PE-1210AGC220STS|500|1100|22|+/-30%|0.5|250|10|80| |es es|ee|es| |PE-1210AGC510STS|1000|2600|51|+/-30%|1.5|200|10|80| |Rs|es|es|es|ee| |PE-1210AGC101STS|2200|5100|100|+/-30%|2.0|150|10|80| |a|ee ee|ee|es ee| |PE-1812AGCXXXSTS|Operating Temperature Range -40°C to +125°C| |PE-1812AGC110STS|300|600|11|+/-30%|0.6|360|10|50| |a|es|ee es| |PE-1812AGC220STS|600|1200|22|+/-30%|1.0|310|10|50| |ee|ee es es|es| |PE-1812AGC510STS|1500|3500|51|+/-30%|1.0|230|10|50| |es es|ee|es| |PE-1812AGC101STS|3000|7500|100|+/-30%|2.0|150|10|50| |ee|eses| **----- End of picture text -----**<br> ## **MECHANICAL** ## **SCHEMATIC** **==> picture [512 x 233] intentionally omitted <==** **----- Start of picture text -----**<br> ||||||||||||| |---|---|---|---|---|---|---|---|---|---|---|---| |1|4| |2|3| |view from PCB| |PIN 1| |alt|5|‘a_i|-_|T|Ww| |PE-1210AGC|PE-1812AGC|W|S| |—|INN| |T| |All Units in mm| |+|:|a|X| |Component Dimensions (mm)|SOLDER PAD (mm)| |Series|A|B|C|D|E1|E2|F|X|T|W|S| |1210 AGC|3.2 +/-0.20|2.5 +/-0.20|2.40 +/-0.20|0.15 ref.|0.70+ / -0.20|0.95+ / -0.20|0.40 ref.|3.60|1.60|2.70|0.60| |1812 AGC|4.5 +/-0.20|3.2 +/-0.20|3.05 +/-0.20|0.15 ref.|0.75+ / -0.20|0.95+ / -0.20|1.50 ref.|5.00|2.80|3.40|1.10| **----- End of picture text -----**<br> W724.D (2026-04-20) 1 | YAGEOGroup.com **Automotive PulseChip[TM] CAN chokes** 2-Line EMI Suppression for CAN-Bus Networks ## **Impedance vs Frequency** ## **Temp vs DC Current** PE-1210AGC110STS ## **Impedance vs Frequency** ## **Temp vs DC Current** PE-1210AGC220STS W724.D (2026-04-20) 2 | YAGEOGroup.com **Automotive PulseChip[TM] CAN chokes** 2-Line EMI Suppression for CAN-Bus Networks ## **Impedance vs Frequency** ## **Temp vs DC Current** PE-1210AGC510STS ## **Impedance vs Frequency** ## **Temp vs DC Current** PE-1210AGC101STS W724.D (2026-04-20) 3 | YAGEOGroup.com **Automotive PulseChip[TM] CAN chokes** 2-Line EMI Suppression for CAN-Bus Networks ## **Impedance vs Frequency** ## **Temp vs DC Current** PE-1812AGC110STS ## **Impedance vs Frequency** ## **Temp vs DC Current** PE-1812AGC220STS W724.D (2026-04-20) 4 | YAGEOGroup.com ## **Automotive PulseChip[TM] CAN chokes** 2-Line EMI Suppression for CAN-Bus Networks ## **Impedance vs Frequency** ## **Temp vs DC Current** PE-1812AGC510STS ## **Impedance vs Frequency** ## **Temp vs DC Current** PE-1812AGC101STS W724.D (2026-04-20) 5 | YAGEOGroup.com ## **Automotive PulseChip[TM] CAN chokes** 2-Line EMI Suppression for CAN-Bus Networks **==> picture [56 x 42] intentionally omitted <==** |Reliability Test|Reliability Test|Reliability Test|Reliability Test| |---|---|---|---| |Item|Reference documents|Test Condition|Test Specifcation| |1. High Temperature Exposure|MIL-STD-202 Method 108|1. Temperature: 125°C<br>2. Time: 1000 hours|1. No mechanical and electrical damage<br>2. Inductance shall be within specifcation| |2. Temperature Cycling|JESD22 Method JA-104|1. Temperature: -40°C~125°C<br>2. Number of cycles: 1000 cycle<br>3. Dwell time: 30 minutes|1. No mechanical and electrical damage<br>2. Inductance shall be within specifcation| |3. Biased Humidity Test|MIL-STD-202 Method 103|1. Temperature: 85±5°C<br>2. Time: 1000 hours<br>3. Humidity: 85±5% RH|1. No mechanical and electrical damage<br>2. Inductance shall be within specifcation| |4. Operational Life|MIL-PRF-27|1. Temperature: 125°C<br>2. Time: 1000 hours<br>3. Apply DC current reference|1. No mechanical and electrical damage<br>2. Inductance shall be within specifcation| |5. External Visual|MIL-STD-883 Method 2009|Inspect product construction, marking and<br>workmanship|Per product specifcation standard| |6. Physical Dimensions|JESD22 Method JB-100|Verify physical dimensions to the applicable<br>product<br>detail specifcation|Per product specifcation standard| |7. Mechanical Shock|MIL-STD-202 Method 213|Pulse shape: Half-sine waveform<br>Impact acceleration: 100g<br>Pulse duration: 6ms|1. No mechanical and electrical damage<br>2. Inductance shall be within specifcation| |8. Vibration Test|MIL-STD-202 Method 204|1. Frequency and Amplifed: 10-2000-10 Hz, 1.5mm<br>2. Direction: X, Y, Z<br>3. Test duration: 2 hours for each direction, 6 hours<br>in total|The forces applied on the right conditions must<br>not damage the terminal electrode and the<br>ferrite| |9. Resistance to Soldering Heat<br>Test|MIL-STD-202 Method 210|1. Temperature: 260±5°C<br>2. Time: 10±1s|1. No mechanical and electrical damage<br>2. Inductance shall be within specifcation| |10. Solderability Test|J-STD-002|1. 8 hours steam age test<br>2. Soldering: 245±5°C, for 5±1Sec.|The terminal shall be at least 95% covered with fresh<br>solder.| |11. Electrical Characterization|User Spec.|1. Operating temperature:-40°C±125°C<br>2. Room Temperature: 25°C|1. No mechanical and electrical damage<br>2. Inductance shall be within specifcation| |12. Board Flex|AEC-Q200-005|1. Epoxy - PCB (1.6mm)<br>2. Defection 2mm (min)<br>3. Holding tim 60s minimum|1. During the test no breakdown.<br>2. The characteristic is normal after test.| |13. Terminal Strength Test|AEC-Q200-006|1. Apply push force to samples mounted on PCB.<br>2. Force of 1.8 kg for 60±1 seconds.|After test, inductors shall be on mechanical damge.| W724.D (2026-04-20) 6 | YAGEOGroup.com **Automotive PulseChip[TM] CAN chokes** 2-Line EMI Suppression for CAN-Bus Networks ## **Tape and Reel Specifications** ## CARRIER TAPE - SEE TABLES BELOW |~~_~~<br>~~=~~|~~_~~<br>~~=~~|~~_~~<br>~~=~~|~~_~~<br>~~=~~|~~_~~<br>~~=~~|~~_~~<br>~~=~~|~~_~~<br>~~=~~|~~lL~~|~~lL~~|~~lL~~|~~lL~~|~~lL~~|~~lL~~| |---|---|---|---|---|---|---|---|---|---|---|---|---| |Reel Dimensions (mm)<br>Series<br>Parts per Reel<br>A<br>B<br>C<br>D<br>E|||||||Tape Dimensions (mm)<br>W<br>P1<br>P2<br>P3<br>H<br>T|||||| |1210 AGC|2000|330|103|13.5|16.5|12.5|12.0|2.0|8.0|4.0|2.70|0.30| |1812 AGC|2000|330|103|13.5|16.5|12.5|12.0|2.0|8.0|4.0|3.60|0.30| - III. Description: a. Ferrite drum core construction b. Magnetically shielded c. Enameled copper wire: H class d. Product weight: 0.15g (ref.) e. Moisture sensitivity Level 1 f. Products comply with RoHS’ requirements g. Halogen Free available - IV. General specification: a. Storage temp: -40°C to +125°C b. Operating temp: -40°C to +125°C (Temp. rise included) c. Resistance to solder heat: 250°C 10 secs. ## For More Information: **Americas -** prodinfo_network_americas@yageo.com | **Europe -** prodinfo_network_emea@yageo.com | **Asia -** prodinfo_network_asia@yageo.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2023. Pulse Electronics, Inc. All rights reserved. YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight. 7 | YAGEOGroup.com W724.D (2026-04-20) ~~—~~
Updated at June 5, 2026
Pulse Electronics, a YAGEO company, is a global leader in the design and manufacturing of passive electronic components. With a legacy of innovation dating back to 1956, the company provides essential technology for the communications, computing, industrial, transportation, and IoT sectors. Pulse is recognized worldwide for delivering high-performance solutions that power advanced applications, ranging from 5G networks and electric vehicles to data centers and smart grids. The company's extensive product portfolio is heavily anchored in power and networking magnetics. This includes a comprehensive range of power inductors engineered for exceptional efficiency and reliability in demanding environments. To address complex electromagnetic compatibility challenges, Pulse also manufactures highly effective EMC and RFI suppression solutions, such as common mode chokes and filters, alongside specialized toroidal and RF inductors designed to ensure clean power delivery and optimal signal integrity. Beyond traditional magnetics, Pulse excels in the development of advanced wireless and power conversion components. Their connectivity solutions feature a wide array of high-performance RF antennas and single-band chip antennas tailored for modern connected devices. Furthermore, to support sophisticated power architectures, Pulse provides a broad spectrum of transformers—encompassing PCB-mounted designs, current sensing transformers, and precise pulse transformers—equipping engineers with robust, industry-proven components for power isolation and measurement.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →