PA6594-AEC

Document 435P-1 

## **Shielded Power Inductor** NEW!) 

**For Analog Devices AD5758BCPZ Digital-to-analog converter (DAC)** 

- Designed for Analog Devices AD5758BCPZ single-channel, voltage and current output digital-to-analog converter (DAC) with Dynamic Power Control (DPC) 

- AEC-200 Grade 3 qualified (–40°C to +85°C ambient) 

- 4.0 × 4.0 mm footprint; less than 1.8 mm tall 

**Core material** Ferrite 

**Environmental** RoHS compliant, halogen free **Terminations** Matte tin over nickel over silver. **Weight** 54 – 100 mg 

**Ambient temperature** –40°C to +85°C with I rms current up to +125°C, at 50 mA continuous current or 200 mA for short durations **Maximum part temperature** +125°C (ambient + temp rise). Derating. **Storage temperature** Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C 

**Resistance to soldering heat** Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles **Moisture Sensitivity Level (MSL)** 1 (unlimited floor life at <30°C / 85% relative humidity) 

**Failures in Time (FIT) / Mean Time Between Failures (MTBF)** 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 **PCB washing** Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. 

||**Inductance**2|**DCR max**3|**SRF typ**4||**Isat(A)**5||**Irms(A)**6||
|---|---|---|---|---|---|---|---|---|
|**Part number**1|**±20%(µH)**|**(Ohms)**|**(MHz)**|**10% drop**|**20% drop**|**30% drop**|**20°C rise  40°C rise**||
|PA6594-AE_|47.0|0.650|16|0.51|0.55|0.56|0.45|0.68|



1. When ordering, please specify **packaging** code: 

## **PA6594-AEC** 

**Packaging: C** = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). 

   - **B** = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. 

   - **D** = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 

2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. 

3. DCR measured on a micro-ohmmeter. 

4. SRF measured using Agilent/HP 8753ES or equivalent. 

5. DC current at 25°C that causes the specified inductance drop from its value without current. 

6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 

7. Electrical specifications at 25°C. 

- Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 

Document 435P-1 Revised 02/13/18 

© Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. 

**US** +1-847-639-6400   sales@coilcraft.com **UK** +44-1236-730595   sales@coilcraft-europe.com **Taiwan** +886-2-2264 3646   sales@coilcraft.com.tw **China** +86-21-6218 8074   sales@coilcraft.com.cn **Singapore** + 65-6484 8412   sales@coilcraft.com.sg 

Document 435P-2 

## **Shielded Power Inductor – PA6594-AE** 

## **L vs Current** 

**==> picture [506 x 289] intentionally omitted <==**

**----- Start of picture text -----**<br>
L vs Current 0.1535 ±0.003*<br>3,90 ±0,076<br>100<br>80<br>70 0.1535 ±0.003* Winding<br>60 3,90 ±0,076 direction<br>50 473 X<br>40<br>Internal<br>code<br>30 Recommended<br>Land Pattern<br>0.0669 ±0.004*<br>0.105<br>20 1,70 ±0,10 2,66<br>0.059<br>1,50<br>10 0.0305<br>0.001 0.01 0.1 1.0 0.110 0.045 0,775 0.153<br>Current (A) 2,79 1,15 3,89<br>0.060<br>0.129<br>1,52<br>3,28<br>0.173<br>* Dimensions are of the case not including 4,40<br>the termination. For maximum overall<br>dimensions including the termination, add<br>0.005 in / 0,13 mm. Dimensions are in [inches ]<br>mm<br>Inductance (µH)<br>**----- End of picture text -----**<br>


**Packaging** 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth **Recommended pick and place nozzle** OD: 4 mm; ID: ≤ 2 mm 

**==> picture [117 x 44] intentionally omitted <==**

Document 435P-2 Revised 02/13/18 

**US** +1-847-639-6400   sales@coilcraft.com **UK** +44-1236-730595   sales@coilcraft-europe.com **Taiwan** +886-2-2264 3646   sales@coilcraft.com.tw **China** +86-21-6218 8074   sales@coilcraft.com.cn **Singapore** + 65-6484 8412   sales@coilcraft.com.sg 

© Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.