P0102BL 5AA4

## **P010XX** 

## Sensitive standard SCRs up to 0.8 A 

− **Datasheet production data** 

**==> picture [194 x 210] intentionally omitted <==**

**----- Start of picture text -----**<br>
A<br>G A<br>K<br>K<br>A<br>G<br>KG<br>A<br>TO-92 SOT-223<br>(P010xxA) (P0102xN)<br>A<br>G<br>K<br>SOT23-3L<br>(P010xxL)<br>**----- End of picture text -----**<br>


## **Description** 

Thanks to highly sensitive triggering levels, the P010XX SCR series is suitable for all applications where available gate current is limited, such as ground fault circuit interrupters, pilot circuits in solid state relays, stand-by mode power supplies, smoke and alarm detectors. 

Available in through-hole or surface mount packages, the voltage capability of this series has been upgraded since its introduction and is now available up to 600 V. 

**Table 1. Device summary** 

|**Symbol**|**Value**|**Unit**|
|---|---|---|
|IT(RMS)|up to 0.8|A|
|VDRM/VRRM|up to 600|V|
|IGT|From 5 to 200|µA|



## **Features** 

- On-state rms current, 0.8 A 

- Repetitive peak off-state voltage up to 600 V 

- Triggering gate current from 5 to 200 µA 

- ECOPACK[®] 2 compliant component 

April 2014 

DocID15197 Rev 2 

1/12 

This is information on a product in full production. 

_www.st.com_ 

**Characteristics** 

**P010xx** 

## **1 Characteristics** 

**Table 2. Absolute ratings (limiting values) P010xxA and P010xxN** 

|**Symbol**|**Parameter**|||**Value**|**Unit**|
|---|---|---|---|---|---|
|IT(RMS)|On-state rms current (180° conduction angle)|TO-92|Tl= 55 °C|0.8|A|
|||SOT-223|Tamb= 70 °C|||
|IT(AV)|Average on-state current (180° conduction angle)|TO-92|Tl= 55 °C|0.5|A|
|||SOT-223|Tamb= 70 °C|||
|ITSM|Non repetitive surge peak on-state current|tp= 8.3 ms|Tj= 25 °C|8|A|
|||tp= 10 ms||7||
|I²t|I²t value for fusing|tp= 10 ms|Tj= 25 °C|0.24|A2S|
|dI/dt|Critical rate of rise of on-state current<br>IG= 2 x IGT, tr ≤100 ns|F = 60 Hz|Tj= 125 °C|50|A/µs|
|IGM|Peak gate current|tp= 20 µs|Tj= 125 °C|1|A|
|PG(AV)|Average gate power dissipation||Tj= 125 °C|0.1|W|
|Tstg<br>Tj|Storage junction temperature range<br>Operating junction temperature range|||- 40 to + 150<br>- 40 to + 125|°C|



**Table 3. Absolute ratings (limiting values) P010xxL** 

|**Symbol**|**Parameter**|||**Value**|**Unit**|
|---|---|---|---|---|---|
|IT(RMS)|On-state rms current (180° conduction angle)||Tamb= 36 °C|0.25|A|
|IT(AV)|Average on-state current (180° conduction angle)||Tamb= 36 °C|0.16|A|
|ITSM|Non repetitive surge peak on-state current|tp= 8.3 ms|Tj= 25 °C|7|A|
|||tp= 10 ms||6||
|I²t|I²t value for fusing|tp= 10 ms|Tj= 25 °C|0.18|A2S|
|dI/dt|Critical rate of rise of on-state current<br>IG= 2 x IGT, tr ≤100 ns|F = 60 Hz|Tj= 125 °C|50|A/µs|
|IGM|Peak gate current|tp= 20 µs|Tj= 125 °C|0.5|A|
|PG(AV)|Average gate power dissipation||Tj= 125 °C|0.02|W|
|Tstg<br>Tj|Storage junction temperature range<br>Operating junction temperature range|||- 40 to + 150<br>- 40 to + 125|°C|



2/12 

DocID15197 Rev 2 

**Characteristics** 

**P010xx** 

**Table 4. Electrical characteristics[(1)] P010xxA and P010xxN** 

|**Symbol**|**Test conditions**|**Test conditions**||**Value**|**Unit**|
|---|---|---|---|---|---|
|IGT|VD= 12 V, RL= 140Ω||Max.|200|µA|
|VGT|||Max.|0.8|V|
|VGD|VD= VDRM, RL= 3.3 kΩ,RGK= 1 kΩ|Tj= 125 °C|Min.|0.1|V|
|VRG|IRG= 10 µA||Min.|8|V|
|IH|IT= 50 mA, RGK= 1 kΩ||Max.|5|mA|
|IL|IG= 1 mA, RGK= 1 kΩ||Max.|6|mA|
|dV/dt|VD= 67% VDRM,RGK= 1 kΩ|Tj= 125 °C|Min.|75|V/µs|
|VTM|ITM= 1.6 A, tp = 380 µs|Tj= 25 °C|Max.|1.95|V|
|Vt0|Threshold voltage|Tj= 125 °C|Max.|0.95|V|
|Rd|Dynamic resistance|Tj= 125 °C|Max.|600|mΩ|
|IDRM<br>IRRM|VDRM= VRRM= 400 V    RGK= 1 kΩ|Tj= 25 °C|Max.|1|µA|
||VDRM= VRRM= 600 V    RGK= 1 kΩ|||10||
||VDRM= VRRMRGK= 1 kΩ|Tj= 125 °C||100||



1. Tj = 25 °C, unless otherwise specified 

**Table 5. Electrical characteristics[(1)] P010xxL** 

|**Symbol**|**Test conditions**|||**P0102xL**|**P0109AL**|**Unit**|
|---|---|---|---|---|---|---|
|IGT|VD= 12 V, RL= 140Ω||Max.|200|1|µA|
|VGT|||Max.|0.8||V|
|VGD|VD= VDRM, RL= 3.3 kΩ,RGK= 1 kΩ|Tj= 125 °C|Min.|0.1||V|
|VRG|IRG= 10 µA||Min.|8||V|
|IH|IT= 50 mA, RGK= 1 kΩ||Max.|6||mA|
|IL|IG= 1 mA, RGK= 1 kΩ||Max.|7||mA|
|dV/dt|VD= 67% VDRM, RGK= 1 kΩ|Tj= 125 °C|Min.|200|100|V/µs|
|VTM|ITM= 0.4 A, tp = 380 µs|Tj= 25 °C|Max.|1.7||V|
|Vt0|Threshold voltage|Tj= 125 °C|Max.|1.0||V|
|Rd|Dynamic resistance|Tj= 125 °C|Max.|1000||mΩ|
|IDRM<br>IRRM|VDRM= VRRM|Tj= 25 °C|Max.|1||µA|
|||Tj= 125 °C||100|||



1. Tj = 25 °C, unless otherwise specified 

DocID15197 Rev 2 

3/12 

**Characteristics** 

**P010xx** 

**Table 6. Electrical device summary** 

|**Order code**|**Voltage**|**Voltage**|**Voltage**|**Voltage**|**Sensitivity**|**Package**|**Packing mode**|
|---|---|---|---|---|---|---|---|
||**100 V**|**200 V**|**400 V**|**600 V**||||
|P0102AA 1AA3|X||||200 µA|TO-92|Bulk|
|P0102AA 5AL3|X||||200 µA|TO-92|Tape and reel 13 inch|
|P0102AL 5AA4|X||||200 µA|SOT23-3L|Tape and reel 7 inch|
|P0102BA 1AA3||X|||200 µA|TO-92|Bulk|
|P0102BL 5AA4||X|||200 µA|SOT23-3L|Tape and reel 7 inch|
|P0102DA 1AA3|||X||200 µA|TO-92|Bulk|
|P0102DA 2AL3|||X||200 µA|TO-92|Ammopack|
|P0102DA 5AL3|||X||200 µA|TO-92|Tape and reel 13 inch|
|P0102DN 5AA4|X||X||200 µA|SOT-223|Tape and reel 7 inch|
|P0102MA 1AA3||||X|200 µA|TO-92|Bulk|
|P0102MN 5AA4||||X|200 µA|SOT-223|Tape and reel 7 inch|
|P0109AL 5AA4|X||||1 µA|SOT23-3L|Tape and reel 7 inch|
|P0109DA 1AA3|||X||1 µA|TO-92|Bulk|
|P0109DA 5AL3|||X||1 µA|TO-92|Tape and reel 13 inch|



**Table 7. Thermal resistance** 

|**Symbol**|**Parameter**|||**Maximum**|**Unit**|
|---|---|---|---|---|---|
|Rth(j-a)|Junction to case (DC)||TO-92|80|°C/W|
|Rth(j-t)|Junction to tab (DC)||SOT-223|30|°C/W|
|Rth(j-a)|Junction to ambient (DC)||TO-92|150|°C/W|
|||S(1)= 5 cm2|SOT-223|60||
|Rth(j-a)|Junction to ambient (mounted on FR4 with recommended pad<br>layout)||SOT23-3L|400|°C/W|



1. S = Copper surface under tab. 

4/12 

DocID15197 Rev 2 

**Characteristics** 

**P010xx** 

**Figure 1. Maximum average power dissipation Figure 2. Maximum average power dissipation versus average on-state current P010xxA and versus average on-state current P010xxL P010xxN** 

**==> picture [436 x 125] intentionally omitted <==**

**----- Start of picture text -----**<br>
P(W) P(W)<br>1.0 0.30<br>0.9 α = 180° 0.280.26 α = 180 °<br>0.8 0.24<br>0.7 0.22<br>0.20<br>0.6 0.18<br>0.16<br>0.5<br>0.14<br>0.4 0.12<br>0.10<br>0.3 360° 0.08 360°<br>0.2 0.06<br>0.04<br>0.1 I T(AV) (A) α 0.02 IT(AV)(A) α<br>0.0 0.00<br>0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18<br>**----- End of picture text -----**<br>


**Figure 3. Average and DC on-state current Figure 4. Average and DC on-state current versus lead temperature versus ambient temperature P010xxA and P010xxA and P010xxN P010xxN** 

**==> picture [434 x 122] intentionally omitted <==**

**----- Start of picture text -----**<br>
IT(AV)(A) IT(AV)(A)<br>1.1 1.2<br>D.C.  (SOT-223) Device mounted on<br>1.0 1.1 FR4 with recomended<br>0.9 1.0 D.C.  (SOT-223) pad layout for SOT-223<br>0.8 D.C.  (TO-92) 0.9<br>0.7 0.8<br>0.6 0.7 D.C.  (TO-92)<br>0.5 α = 180°  (SOT-223) 0.6 α = 180 °  (SOT-223)<br>0.5<br>0.4 0.4<br>0.3 α = 180° (TO-92) 0.3 α = 180°  (TO-92)<br>0.2 0.2<br>0.1 T lead (°C) 0.1 Tamb( ° C)<br>0.0 0.0<br>0 25 50 75 100 125 0 25 50 75 100 125<br>**----- End of picture text -----**<br>


DocID15197 Rev 2 

5/12 

**Characteristics** 

**P010xx** 

**Figure 5. Average and DC on-state current Figure 6. Relative variation of thermal versus case temperature P010xxL impedance junction to ambient versus pulse duration** 

**==> picture [434 x 123] intentionally omitted <==**

**----- Start of picture text -----**<br>
IT(AV)(A) K=[Zth(j-a)/Rth(j-a) []]<br>0.30 1.00<br>0.25<br>D.C.<br>0.20 SOT23-3L<br>α = 180° TO-92<br>0.15 0.10 SOT-223<br>0.10<br>0.05<br>T case (°C) tp(s)<br>0.00 0.01<br>0 25 50 75 100 125 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2<br>**----- End of picture text -----**<br>


**Figure 7. Gate trigger, holding, and latching Figure 8. Relative variation of holding current currents with gate trigger voltage versus versus gate-cathode resistance junction temperature** 

**==> picture [463 x 318] intentionally omitted <==**

**----- Start of picture text -----**<br>
6.0 IGT, VGT, IH, IL[T j] / I GT, VGT, iH, i L[T j=25 °C] 20 IH[RGK] / IH[RGK=1k Ω ]<br>Relative variations T j  = 25°C<br>Typical values 18<br>5.0<br>16<br>4.0 14<br>12<br>IGT<br>3.0 10 Typical values<br>2.0 (RIGK H and I=1 K L Ω ) 68<br>1.0 VGT 4<br>T (°C) j 2<br>0.0 RGK(k Ω )<br>-40 -20 0 20 40 60 80 100 120 140 0<br>1E-2 1E-1 1E+0 1E+1<br>Figure 9. Relative variation of dV/dt immunity  Figure 10. Relative variation of dV/dt immunity<br>versus gate-cathode resistance  versus gate-cathode capacitance<br>10.0 dV/dt[RGK] / dV/dt[RGK=1k Ω ] 10 dV/dt[CGK] / dV/dt[RGK=1k Ω ]<br>VD = 0.67 x VDRM<br>V D = 0.67 x VTj = 125°C DRM R Tj GK = 125°C = 1kΩ<br>8<br>6<br>Typical values<br>1.0<br>4<br>Typical values<br>2<br>RGK(k Ω ) CGK(nF)<br>0.1 0<br>0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 1 2 3 4 5 6 7<br>**----- End of picture text -----**<br>


6/12 

DocID15197 Rev 2 

**Characteristics** 

**P010xx** 

**Figure 11. Surge peak on-state current versus Figure 12. Non-repetitive surge peak number of cycles on-state current and corresponding value of I²t** 

**==> picture [463 x 316] intentionally omitted <==**

**----- Start of picture text -----**<br>
ITSM(A) ITSM(A), I t (A s)2 2<br>8 100.0 Tj initial = 25°C<br>7<br>6 tp=10ms I TSM<br>One cycle 10.0<br>5<br>Non repetitive<br>4 Tj initial=25°C For a sinusoidal pulse<br>3 TRepetitiveamb=25°C 1.0 with width tp < 10 ms<br>2<br>I t2<br>1<br>0 Number of cycles 0.1 t p (ms)<br>1 10 100 1000 0.01 0.10 1.00 10.00<br>Figure 13. On-state characteristics P010xxA,  Figure 14. On-state characteristics P010xxL<br>P010xxN<br>ITM(A) ITM(A)<br>1E+1 1E+1<br>Tj max.: Tj max.:<br>V t0 =0.95V Vt0=1.0V<br>Rd=600mΩ Rd=1 Ω<br>Tj=max Maximum values<br>1E+0 Tj=max Maximum values 1E+0<br>T =25°Cj<br>T =25°Cj<br>1E-1 1E-1<br>VTM(V) VTM(V)<br>1E-2 1E-2<br>0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0<br>**----- End of picture text -----**<br>


**Figure 15. Thermal resistance junction to ambient versus copper surface under tab P010xxN** 

**Figure 16. Thermal resistance junction to ambient versus copper surface under tab P010xxL** 

**==> picture [204 x 117] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rth(j-a)(°C/W)<br>130<br>120110 EFR4, copper thickness = 35 µmpoxy printed circuit board<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>10 S(cm²)<br>0<br>0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0<br>**----- End of picture text -----**<br>


**==> picture [203 x 116] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rth(j-a)(°C/W)<br>500<br>Epoxy printed circuit board<br>400 FR4, copper thickness = 35 µm<br>300<br>200<br>100<br>S(cm²)<br>0<br>0 10 20 30 40 50 60 70 80 90 100<br>**----- End of picture text -----**<br>


DocID15197 Rev 2 

7/12 

**Package information** 

**P010xx** 

## **2 Package information** 

- Epoxy meets UL94, V0 

- Lead-free package 

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK[®] packages, depending on their level of environmental compliance. ECOPACK[®] specifications, grade definitions and product status are available at: _www.st.com._ ECOPACK[®] is an ST trademark. 

**Table 8. TO-92 dimensions** 

|**B**||**a**<br>**D**<br>**E**|**Ref**|**dimensions**|**dimensions**|**dimensions**|**dimensions**|**dimensions**|**dimensions**|
|---|---|---|---|---|---|---|---|---|---|
|||||**Millimeters**|||**Inches**|||
|||||**Min**|**Typ**|**Max**|**Min**|**Typ**|**Max**|
||**A**<br>**F**<br>**C**|||||||||
||||A<br>B||1.35|4.70||0.053|0.185|
||||C||2.54|||0.100||
||||D|4.40|||0.173|||
|||||||||||
||||E|12.70|||0.500|||
||||F|||3.70|||0.146|
||||a|||0.50|||0.019|



**Table 9. SOT-223 dimensions** 

|**A**<br>**A1**<br>**H**<br>**E**|||**V**<br>**c**|**V**<br>**c**|**V**<br>**c**|**Ref.**|**Dimensions**|**Dimensions**|**Dimensions**|**Dimensions**|**Dimensions**|**Dimensions**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||||||**Millimeters**|||**Inches**|||
||||||||**Min.**|**Typ.**|**Max.**|**Min.**|**Typ.**|**Max.**|
|||**e1**<br>**D**<br>**B1**<br>**e**<br>**2**<br>**4**<br>**3**<br>**B**<br>|**V**||||||||||
||||||||||||||
|||||||A|||1.80|||0.071|
|||||||A1||0.02|0.10||0.001|0.004|
|||||||B|0.60|0.70|0.85|0.024|0.027|0.033|
|||||||B1|2.90|3.00|3.15|0.114|0.118|0.124|
|||**B1**|||||||||||
||||||||||||||
|||||||c|0.24|0.26|0.35|0.009|0.010|0.014|
||||||||||||||
||**1**|**4**||||D(1)|6.30|6.50|6.70|0.248|0.256|0.264|
|||**2**<br>**3**||||e||2.3|||0.090||
||||||||||||||
|||||||e1||4.6|||0.181||
|||||||E(1)|3.30|3.50|3.70|0.130|0.138|0.146|
|||||||H|6.70|7.00|7.30|0.264|0.276|0.287|
|||||||V|10° max||||||



1. Do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15mm (0.006inches) 

8/12 

DocID15197 Rev 2 

**P010xx** 

**Package information** 

## **Figure 17. Footprint (dimensions in mm)** 

**==> picture [160 x 155] intentionally omitted <==**

**----- Start of picture text -----**<br>
3.25<br>1.32<br>5.16 7.80<br>1.32<br>2.30 0.95<br>**----- End of picture text -----**<br>


## **Table 10. SOT23-3L dimensions** 

|**B**|**B**|||||**A1**<br>**A**<br>**L**<br>**D**<br>**e**<br>**e1**<br>**S**<br>**c**|**A1**<br>**A**<br>**L**<br>**D**<br>**e**<br>**e1**<br>**S**<br>**c**|**A1**<br>**A**<br>**L**<br>**D**<br>**e**<br>**e1**<br>**S**<br>**c**|**Ref.**|**Dimensions**|**Dimensions**|**Dimensions**|**Dimensions**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||||||||||**Millimeters**||**Inches**||
|||||**E**||||||||||
|||||||||||**Min.**|**Max.**|**Min.**|**Max.**|
||||||||||A|0.89|1.4|0.035|0.055|
||||||||||A1|0|0.1|0|0.004|
|||||||||**e1**||||||
||||||||||B|0.3|0.51|0.012|0.02|
|||||||||||||||
||||||||||c|0.085|0.18|0.003|0.007|
||||||||**S**||D|2.75|3.04|0.108|0.12|
||||||||||e|0.85|1.05|0.033|0.041|
||||||||||e1|1.7|2.1|0.067|0.083|
|||||||||||||||
||||||||||E|1.2|1.6|0.047|0.063|
|||||||||||||||
|||||**H**|||||H|2.1|2.75|0.083|0.108|
||||||||||L|0.6 typ.||0.024 typ.||
|||||||||||||||
||||||||||S|0.35|0.65|0.014|0.026|



## **Figure 18. Footprint (dimensions in mm)** 

**==> picture [160 x 132] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.95 0.61<br>1.26<br>0.73 3.25<br>**----- End of picture text -----**<br>


DocID15197 Rev 2 

9/12 

**Ordering information** 

**P010xx** 

## **3 Ordering information** 

## **Figure 19. Ordering information scheme** 

**P     01   0x     x     x Blank xAxx Sensitive SCR series Current** 01 up to 0.8 A **Sensitivity** 02 = 200 µA 09 = 1 µA **Voltage** A = 100 V B = 200 V D = 400 V M = 600 V **Package** A = TO-92 L = SOT23-3L N = SOT-223 **Packing mode** 1AA3 = Bulk 2AL3 = Ammopack 5AL3 = Tape and reel 13 inch 5AA4 = Tape and reel 7 inch 

**Table 11. Ordering information** 

|**Order code**|**Marking**|**Package**|**Weight**|**Base qty**|**Packing mode**|
|---|---|---|---|---|---|
|P0102AA 1AA3|P0102 AA|TO-92|0.2 g|2500|Bulk|
|P0102AA 5AL3|P0102 AA|TO-92|0.2 g|2000|Tape and reel 13 inch|
|P0102AL 5AA4|P2A|SOT23-3L|0.01 g|3000|Tape and reel 7 inch|
|P0102BA 1AA3|P0102 BA|TO-92|0.2 g|1000|Bulk|
|P0102BL 5AA4|P2B|SOT23-3L|0.01 g|3000|Tape and reel 7 inch|
|P0102DA 1AA3|P0102 DA|TO-92|0.2 g|2500|Bulk|
|P0102DA 2AL3|P0102 DA|TO-92|0.2 g|2000|Ammopack|
|P0102DA 5AL3|P0102 DA|TO-92|0.2 g|2000|Tape and reel 13 inch|
|P0102DN 5AA4|P2D|SOT-223|0.11 g|3000|Tape and reel 7 inch|
|P0102MA 1AA3|P0102 MA|TO-92|0.2 g|2500|Bulk|
|P0102MN 5AA4|P2M|SOT-223|0.11 g|2000|Tape and reel 7 inch|
|P0109AL 5AA4|P9A|SOT23-3L|0.01 g|3000|Tape and reel 7 inch|
|P0109DA 1AA3|P0109 DA|TO-92|0.2 g|2500|Bulk|
|P0109DA 5AL3|P0109 DA|TO-92|0.2 g|2000|Tape and reel 13 inch|



10/12 

DocID15197 Rev 2 

**P010xx** 

**Revision history** 

## **4 Revision history** 

**Table 12. Document revision history** 

|**Date**|**Revision**|**Changes**|
|---|---|---|
|24-Nov-2008|1|First issue.|
|01-Apr-2014|2|Added VGTin_Figure 7_, updated_Figure 11_and_Table 9_<br>and reformatted to current standard.|



DocID15197 Rev 2 

11/12 

**P010xx** 

## **Please Read Carefully:** 

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. 

All ST products are sold pursuant to ST’s terms and conditions of sale. 

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. 

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. 

**UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.** 

**ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.** 

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. 

ST and the ST logo are trademarks or registered trademarks of ST in various countries. 

Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. 

© 2014 STMicroelectronics - All rights reserved 

STMicroelectronics group of companies 

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 

## **www.st.com** 

12/12 

DocID15197 Rev 2