ODLC-45-700

**==> picture [512 x 749] intentionally omitted <==**

**ODLC - 45 series** 

45W Constant Current Mode LED Driver 

## **SPECIFICATION** 

|**MODEL**<br>**OUTPUT**<br>**SETUP TIME**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**SHORT CIRCUIT**<br><0.75mA / 277VAC<br>20 ~ 90% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 40<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes<br>408.8Khrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>℃<br>℃<br>℃<br>0.42Kg; 24pcs/ 11Kg/ 0.72CUFT<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC<br>I/P-O/P:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**SAFETY STANDARDS**<br>Compliance to EN55015, EN61000-3-2 Class C (<br>) ; EN61000-3-3,GB17743,GB17625.1,EAC TP TC 020<br>@load<br>60%<br>≧<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>111*77*28.5mm(L*W*H)<br>Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(<br>),EAC TP TC 020<br>surge immunity:Line-Line:1KV<br>UL8750<br>,CSA C22.2 NO.250.13-12;<br>(type”HL”)<br>ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14;<br>**TOTAL HARMONIC DISTORTION**<br>**VOLTAGE RANGE**<br>**Note.3**<br>**ODLC-45    -350**<br>**ODLC-45    -700**<br>**ODLC-45    -1400**<br>350mA<br>700mA<br>1400mA<br>33.25W<br>44.8W<br>44.8W<br>118V<br>500ms / 230VAC    1200ms/115VAC<br>47 ~ 63Hz<br>PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br>86%<br>85%<br>83%<br>0.6A/115VAC    0.4A/230VAC          0.3A/277VAC<br>COLD START 30A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>100μ<br>;Per NEMA 410<br>57 ~ 95V<br>38 ~ 64V<br>19 ~ 32V<br>84V<br>50V<br>**ODLC-45    -500**<br>500mA<br>45W<br>85%<br>54 ~ 90V<br>115V<br>**ODLC-45    -1050**<br>1050mA<br>45.15W<br>84%<br>26 ~ 43V<br>63V<br>**RATED CURRENT**<br>**RATED POWER**<br>**CURRENT TOLERANCE**<br>**CONSTANT CURRENT REGION Note.2**<br>**OPEN CIRCUIT VOLTAGE(max.)**<br>**CURRENT RIPPLE**<br>±7.0%<br>5% max. @rated current<br>THD< 20%(@load 60%/230VAC; @load 75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION” section)<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>32 units (circuit breaker of type B) / 32 units  (circuit breaker of type C) at 230VAC<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>90 ~ 295VAC          127 ~ 417VDC<br>**AUXILIARY DC OUTPUT Note.5**<br>Nominal 12V(deviation 11.4~12.6)@50mA for ODLC-45A only<br>No load power consumption<0.5W for Blank-Type,<1.2W for ODLC-45A<br>Standby power consumption<0.5W for DA-Type<br>**NO LOAD/STANDBY**<br>**POWER CONSUMPTION**<br>**WORKING TEMP.**<br>**MAX. CASE TEMP.**<br>Tcase=-20 ~ +85<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>Tcase=+85℃<br>BIS IS15885( for ODLC-45-700,1050,700DA,1050DA only), EAC TP TC 004,IP67 approved<br>**DALI STANDARDS**<br>Compliance to IEC62386-101, 102 for DA-Type only<br>Hiccup mode,auto-recovery after fault condition is removed for DA type；<br>Hiccup mode,re-power on to recovery for other type<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 _ of ambient temperature.<br>2. Please refer to "DRIVING METHODS OF LED MODULE".<br>3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>4. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.<br>5. Aux. 12V will be damaged with short circuit; It will not be available when output voltage is not in constant current region or output no load condition.<br>6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be<br>affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>7.The DALI version driver does not support the bit 1: Lamp failure in the Command 144 Query status of the DALI standard.<br>8. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>9. For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf|**MODEL**<br>**OUTPUT**<br>**SETUP TIME**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**SHORT CIRCUIT**<br><0.75mA / 277VAC<br>20 ~ 90% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 40<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes<br>408.8Khrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>℃<br>℃<br>℃<br>0.42Kg; 24pcs/ 11Kg/ 0.72CUFT<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC<br>I/P-O/P:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**SAFETY STANDARDS**<br>Compliance to EN55015, EN61000-3-2 Class C (<br>) ; EN61000-3-3,GB17743,GB17625.1,EAC TP TC 020<br>@load<br>60%<br>≧<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>111*77*28.5mm(L*W*H)<br>Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(<br>),EAC TP TC 020<br>surge immunity:Line-Line:1KV<br>UL8750<br>,CSA C22.2 NO.250.13-12;<br>(type”HL”)<br>ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14;<br>**TOTAL HARMONIC DISTORTION**<br>**VOLTAGE RANGE**<br>**Note.3**<br>**ODLC-45    -350**<br>**ODLC-45    -700**<br>**ODLC-45    -1400**<br>350mA<br>700mA<br>1400mA<br>33.25W<br>44.8W<br>44.8W<br>118V<br>500ms / 230VAC    1200ms/115VAC<br>47 ~ 63Hz<br>PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)<br>86%<br>85%<br>83%<br>0.6A/115VAC    0.4A/230VAC          0.3A/277VAC<br>COLD START 30A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>100μ<br>;Per NEMA 410<br>57 ~ 95V<br>38 ~ 64V<br>19 ~ 32V<br>84V<br>50V<br>**ODLC-45    -500**<br>500mA<br>45W<br>85%<br>54 ~ 90V<br>115V<br>**ODLC-45    -1050**<br>1050mA<br>45.15W<br>84%<br>26 ~ 43V<br>63V<br>**RATED CURRENT**<br>**RATED POWER**<br>**CURRENT TOLERANCE**<br>**CONSTANT CURRENT REGION Note.2**<br>**OPEN CIRCUIT VOLTAGE(max.)**<br>**CURRENT RIPPLE**<br>±7.0%<br>5% max. @rated current<br>THD< 20%(@load 60%/230VAC; @load 75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION” section)<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>32 units (circuit breaker of type B) / 32 units  (circuit breaker of type C) at 230VAC<br>(Please refer to "STATIC CHARACTERISTIC" section)<br>90 ~ 295VAC          127 ~ 417VDC<br>**AUXILIARY DC OUTPUT Note.5**<br>Nominal 12V(deviation 11.4~12.6)@50mA for ODLC-45A only<br>No load power consumption<0.5W for Blank-Type,<1.2W for ODLC-45A<br>Standby power consumption<0.5W for DA-Type<br>**NO LOAD/STANDBY**<br>**POWER CONSUMPTION**<br>**WORKING TEMP.**<br>**MAX. CASE TEMP.**<br>Tcase=-20 ~ +85<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃<br>Tcase=+85℃<br>BIS IS15885( for ODLC-45-700,1050,700DA,1050DA only), EAC TP TC 004,IP67 approved<br>**DALI STANDARDS**<br>Compliance to IEC62386-101, 102 for DA-Type only<br>Hiccup mode,auto-recovery after fault condition is removed for DA type；<br>Hiccup mode,re-power on to recovery for other type<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 _ of ambient temperature.<br>2. Please refer to "DRIVING METHODS OF LED MODULE".<br>3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>4. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.<br>5. Aux. 12V will be damaged with short circuit; It will not be available when output voltage is not in constant current region or output no load condition.<br>6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be<br>affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>7.The DALI version driver does not support the bit 1: Lamp failure in the Command 144 Query status of the DALI standard.<br>8. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>9. For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf|**ODLC-45    -350**|**ODLC-45    -500**|**ODLC-45    -700**|**ODLC-45    -1050**|**ODLC-45    -1400**|
|---|---|---|---|---|---|---|
||**RATED CURRENT**|350mA|500mA|700mA|1050mA|1400mA|
||**RATED POWER**|33.25W|45W|44.8W|45.15W|44.8W|
||**CONSTANT CURRENT REGION Note.2**|57 ~ 95V|54 ~ 90V|38 ~ 64V|26 ~ 43V|19 ~ 32V|
||**OPEN CIRCUIT VOLTAGE(max.)**|118V|115V|84V|63V|50V|
||**CURRENT RIPPLE**|5% max. @rated current|||||
||**CURRENT TOLERANCE**|±7.0%|||||
||**SETUP TIME**<br>**Note.4**|500ms / 230VAC    1200ms/115VAC|||||
||**AUXILIARY DC OUTPUT Note.5**|Nominal 12V(deviation 11.4~12.6)@50mA for ODLC-45A only|||||
||**VOLTAGE RANGE**<br>**Note.3**|(Please refer to "STATIC CHARACTERISTIC" section)<br>90 ~ 295VAC          127 ~ 417VDC|||||
||**FREQUENCY RANGE**|47 ~ 63Hz|||||
||**POWER FACTOR (Typ.)**|PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load<br>(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)|||||
||**TOTAL HARMONIC DISTORTION**|THD< 20%(@load 60%/230VAC; @load 75%/277VAC)<br>≧<br>≧<br>(Please refer to “TOTAL HARMONIC DISTORTION” section)|||||
||**EFFICIENCY (Typ.)**|86%|85%|85%|84%|83%|
||**AC CURRENT**|0.6A/115VAC    0.4A/230VAC          0.3A/277VAC|||||
||**INRUSH CURRENT (Typ.)**|COLD START 30A(twidth=<br>s measured at 50% Ipeak) at 230VAC<br>100μ<br>;Per NEMA 410|||||
||**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**|32 units (circuit breaker of type B) / 32 units  (circuit breaker of type C) at 230VAC|||||
||**LEAKAGE CURRENT**|<0.75mA / 277VAC|||||
||**NO LOAD/STANDBY**<br>**POWER CONSUMPTION**|No load power consumption<0.5W for Blank-Type,<1.2W for ODLC-45A<br>Standby power consumption<0.5W for DA-Type|||||
||**SHORT CIRCUIT**|Hiccup mode,auto-recovery after fault condition is removed for DA type；<br>Hiccup mode,re-power on to recovery for other type|||||
||**WORKING TEMP.**|Tcase=-20 ~ +85<br>(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)<br>℃|||||
||**MAX. CASE TEMP.**|Tcase=+85℃|||||
||**WORKING HUMIDITY**|20 ~ 90% RH non-condensing|||||
||**STORAGE TEMP., HUMIDITY**|-40 ~ +80<br>, 10 ~ 95% RH<br>℃|||||
||**TEMP. COEFFICIENT**|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 40<br>)|||||
||**VIBRATION**|10 ~ 500Hz, 2G 10min./1cycle, period for  60min. each along X, Y, Z axes|||||
||**SAFETY STANDARDS**|UL8750<br>,CSA C22.2 NO.250.13-12;<br>(type”HL”)<br>ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14;<br>BIS IS15885( for ODLC-45-700,1050,700DA,1050DA only), EAC TP TC 004,IP67 approved|||||
||**DALI STANDARDS**|Compliance to IEC62386-101, 102 for DA-Type only|||||
||**WITHSTAND VOLTAGE**|I/P-O/P:3.75KVAC|||||
||**ISOLATION RESISTANCE**|I/P-O/P:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃|||||
||**EMC EMISSION**|Compliance to EN55015, EN61000-3-2 Class C (<br>) ; EN61000-3-3,GB17743,GB17625.1,EAC TP TC 020<br>@load<br>60%<br>≧|||||
||**EMC IMMUNITY**|Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(<br>),EAC TP TC 020<br>surge immunity:Line-Line:1KV|||||
||**MTBF**|408.8Khrs min.      MIL-HDBK-217F (25<br>)<br>℃|||||
||**DIMENSION**|111*77*28.5mm(L*W*H)|||||
||**PACKING**<br>℃<br>℃<br>℃<br>0.42Kg; 24pcs/ 11Kg/ 0.72CUFT<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 _ of ambient temperature.<br>2. Please refer to "DRIVING METHODS OF LED MODULE".<br>3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.<br>4. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time.<br>5. Aux. 12V will be damaged with short circuit; It will not be available when output voltage is not in constant current region or output no load condition.<br>6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be<br>affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>7.The DALI version driver does not support the bit 1: Lamp failure in the Command 144 Query status of the DALI standard.<br>8. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>9. For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf||||||



℃ /1000m with fanless models and of 5 ℃ /1000m with fan 

_File Name:ODLC-45-SPEC   2018-09-29_ 

45W Constant Current Mode LED Driver 

## **ODLC - 45 series** 

**==> picture [78 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
Block Diagram<br>**----- End of picture text -----**<br>


**==> picture [471 x 130] intentionally omitted <==**

**----- Start of picture text -----**<br>
fosc :  70KHz<br>RECTIFIERS AUX+(for ODLC-45A)<br>AUX-(for ODLC-45A)<br>EMI FILTER POWER RECTIFIERS Vo+<br>I/P & SWITCHING & Vo-<br>RECTIFIERS FILTER<br>CURRENT DIM+(DA+)<br>LIMIT DIM-(DA-)<br>O.L.P. DETECTION<br>PWM&PFC CIRCUIT<br>CONTROL<br>**----- End of picture text -----**<br>


## **DRIVING METHODS OF LED MODULE** 

※ This series works in constant current mode to directly drive the LEDs. 

**==> picture [220 x 150] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>Constant<br>Current area<br>60<br>(min.)<br>Hiccup<br>Protection<br>50 100 Io(%)<br>Typical output current normalized by rated current (%)<br>Vo(%)<br>**----- End of picture text -----**<br>


In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. 

_File Name:ODLC-45-SPEC   2018-09-29_ 

**ODLC - 45 series** 

45W Constant Current Mode LED Driver 

## **DIMMING OPERATION** 

**==> picture [144 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
AUX-(Green)*<br>AUX+(Yellow)*<br>Vo-(Black)<br>Vo+(Red)<br>DIM-/DA-(Gray)<br>DIM+/DA+(Purple)<br>ACN(Blue)<br>ACL(Brown)<br>*AUX-/AUX+ only for ODLC-45A<br>**----- End of picture text -----**<br>


- ※ **2 in 1 dimming function** 

- �Output constant current level can be adjusted by applying one of the two methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal. 

- �Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. 

- Applying additive 0 ~ 10VDC 

**==> picture [215 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
+<br>+V +<br>-<br>-V -<br>DIM+<br>+<br>Additive Voltage<br>-<br>DIM-<br>“DO NOT connect "DIM- to Vo-"<br>**----- End of picture text -----**<br>


- Applying additive 10V PWM signal (frequency range 300Hz ~ 3KHz): 

**==> picture [215 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
+<br>+V +<br>-<br>-V -<br>DIM+<br>Additive PWM signal<br>DIM-<br>“DO NOT connect "DIM- to Vo-"<br>**----- End of picture text -----**<br>


- ※ **DALI Interface  (primary side; for DA-Type)** 

**==> picture [158 x 301] intentionally omitted <==**

**----- Start of picture text -----**<br>
100%<br>90%<br>80%<br>70%<br>60%<br>50%<br>40%<br>30%<br>20%<br>10%<br>0%<br>0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V<br>Dimming input: Additive voltage<br>100%<br>90%<br>80%<br>70%<br>60%<br>50%<br>40%<br>30%<br>20%<br>10%<br>0%<br>0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>Duty cycle of additive 10V PWM signal dimming input<br>Output current (%)<br>Output current (%)<br>**----- End of picture text -----**<br>


- �Apply DALI signal between DA+ and DA-. �DALI protocol comprises 16 groups and 64 addresses. �First step is fixed at 8% of output. 

Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%. 2. The output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle. 

_File Name:ODLC-45-SPEC   2018-09-29_ 

**ODLC - 45 series** 

45W Constant Current Mode LED Driver 

## **OUTPUT LOAD vs TEMPERATURE** 

**==> picture [483 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
90~295VAC for 350mA Model,200~295VAC for others 90~295VAC for 350mA Model,200~295VAC for others<br>100 100<br>80 80<br>90~200VAC for models other 90~200VAC for models other<br>60 than 350mA Model 60 than 350mA Model<br>40 40<br>20 20<br>-20 -10 0 10 20 30 40 50 (HORIZONTAL) -20 -10 0 15 30 45 60 85 (HORIZONTAL)<br>AMBIENT TEMPERATURE,Ta ( ℃ ) CASE TEMPERATURE ( ℃ )<br>LOAD (%) LOAD (%)<br>**----- End of picture text -----**<br>


## **STATIC CHARACTERISTIC** 

## **POWER FACTOR (PF) CHARACTERISTIC** 

## ※ Tcase at 75℃ 

**==> picture [200 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>90 for 350mA Model<br>80<br>70 for others<br>60<br>50<br>40<br>90 135 180 200 295<br>INPUT VOLTAGE (V)<br>LOAD (%)<br>**----- End of picture text -----**<br>


※De-rating is needed under low input voltage. 

**==> picture [251 x 155] intentionally omitted <==**

**----- Start of picture text -----**<br>
1<br>0.95<br>0.9<br>277V<br>0.85<br>230V<br>115V<br>0.8<br>0.75<br>0.7<br>50% 60% 70% 80% 90% 100%<br>(45W)<br>LOAD<br>PF<br>**----- End of picture text -----**<br>


## **TOTAL HARMONIC DISTORTION (THD)** 

## **EFFICIENCY vs LOAD** 

ODLC-45 series possess superior working efficiency that up to 86% can be reached in field applications. 

## ※ 350mA Model,Tcase at 75℃ 

**==> picture [237 x 143] intentionally omitted <==**

**----- Start of picture text -----**<br>
16<br>14<br>12<br>10<br>277V<br>8<br>230V<br>6<br>115V<br>4<br>2<br>0<br>50% 60% 70% 80% 90% 100%<br>LOAD<br>THD(%)<br>**----- End of picture text -----**<br>


## ※ 350mA Model,Tcase at 75℃ 

**==> picture [249 x 148] intentionally omitted <==**

**----- Start of picture text -----**<br>
90<br>88<br>86<br>84 277V<br>82 230V<br>115V<br>80<br>78<br>76<br>50% 60% 70% 80% 90% 100%<br>LOAD<br>EFFICIENCY(%)<br>**----- End of picture text -----**<br>


_File Name:ODLC-45-SPEC   2018-09-29_ 

**ODLC - 45 series** 

45W Constant Current Mode LED Driver 

## **MECHANICAL SPECIFICATION** 

Case No.ODLC-45          Unit:mm 

**==> picture [356 x 344] intentionally omitted <==**

**----- Start of picture text -----**<br>
111<br>3.5<br>200±10<br>150±10<br>AUX-(Green)*<br>AUX+(Yellow)*<br>Vo-(Black)<br>Vo+(Red) 30<br>DIM-/DA-(Gray)<br>DIM+/DA+(Purple)<br>150±10 tc<br>ACN(Blue)<br>ACL(Brown)<br>200±10<br>*AUX-/AUX+ only for ODLC-45A<br>�tc : Max. Case Temperature 2*ψ4.5 3.5<br>ODLC-45 ODLC-45A<br>AC wire No. Assignment(AC IN) DC wire No. Assignment(DC OUT) DC wire No. Assignment(DC OUT)<br>ACN(Blue) SVT 18AWG Vo-(Black) UL1007 18AWG Vo-(Black) UL1007 18AWG<br>ACL(Brown) SVT 18AWG Vo+(Red) UL1007 18AWG Vo+(Red) UL1007 18AWG<br>DIM-/DA-(Gray) UL1007 22AWG DIM-(Gray) UL1007 22AWG<br>DIM+/DA+(Purple) UL1007 22AWG DIM+(Purple) UL1007 22AWG<br>AUX-(Green) UL1007 22AWG<br>AUX+(Yellow) UL1007 22AWG<br>3.5<br>77<br>30 3.5<br>28.5<br>2.5<br>**----- End of picture text -----**<br>


## **INSTALLATION MANUAL** 

Please refer to : http://www.meanwell.com/manual.html 

_File Name:ODLC-45-SPEC   2018-09-29_