MP101302

## **Magnetic Proximity Sensors (Hall Effect)** 

## **MP1013 Sensors** 

Hall-effect position sensor with convenient snap-fit mounting 

## **Description** 

The MP1 Series sensors are one-piece non-contact solid-state position sensors. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a sinking current output. 

## **Features** 

- Solid state reliability 

- Stable output over operating temperature range 

- Open collector (NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor 

- South pole sensitive 

## **Typical Applications** 

   - Door position & interlock 

   - Limit switch 

   - Flow/speed 

   - Home security 

   - Pedal switch 

- Unipolar device (MP101301, MP101302) 

- Latching version available (MP101303) 

- RoHS compliant 

- Fastener-less design 

- IP67 

## **Environmental Specifications** 

Operating / Storage Temperature (MP101301, MP101303) -40 °C to 85 ⁰C (-40 ⁰F to 185 ⁰F) Operating / Storage Temperature (MP101302) -40 ⁰C to 125 °C (-40 ⁰F to 257 ⁰F) Ingress Protection IP67 

## **Electrical Specifications** 

|Operating Supply Voltage|5 to 24 VDC|
|---|---|
|Supply Current (MP101301, MP101302)|4.1 mA typ., 7.5 mA max.|
|Supply Current (MP101303)|2.6 mA typ., 5 mA max.|
|Output Current (Sink) (MP101301, MP101302)|25 mA max.|
|Output Current (Sink) (MP101303)|20 mA max.|
|Maximum Input Voltage (MP101301, MP101302)|30 VDC|
|Maximum Input Voltage (MP101303)|28 VDC|
|Maximum Reverse Voltage (MP101301, MP101302)|30 VDC|
|Maximum Reverse Voltage (MP101303)|None|
|Recommended Pull-Up Resistor|See chart|



## **Mechanical Specifications** 

~~eae~~ Housing Material Glass-reinforced nylon plastic Turn on / off (MP101301, MP101302) 245 Gauss / 60 Gauss ~~aaa~~ Turn on / off (MP101303)* 60 Gauss / 60 Gauss *MP101303 is a latching sensor and releases when 60 Gauss is applied to the north pole 

www.cherryswitches.com 

Page 1 of 2, Last update 2016-01-05, Specifications subject to change without notice. 

## **Products** 

|**Products**||
|---|---|
|**Part Number**|**Leads**|
|MP101301|24 AWG x 150 mm|
|MP101302*|24 AWG x 150 mm|
|MP101303*|24 AWG x 150 mm|



*Not commonly stocked 

Note: An external pull-up resistor is required, the value of which is dependent on the supply voltage. The resistor should be connected between the output and Vcc. Refer to the wiring diagram for lead colors or pin numbering as applicable. 

## **Recommended External Pull-Up Resistor** 

|**Volts DC**|5|9|12|15|24|
|---|---|---|---|---|---|
|**Ohms**|1k|1.8k|2.4k|3k|3k|



## **Open Collector Sinking Block Diagram** 

## **Dimensions mm (inches)** 

www.cherryswitches.com 

Page 2 of 2, Last update 2016-01-05, Specifications subject to change without notice.