MCZ1210CH240L2TA0G

February 2015 

## Common Mode Filters 

For ultra high-speed differential signal line (HDMI, DVI) 

## **MCZ-CH Series** 

## MCZ1210CH Type 

**[0504 inch]*** 

- Dimensions Code JIS[EIA] 

**MCZ1210CH** 

(2/7) 

## **REMINDERS FOR USING THESE PRODUCTS** 

Before using these products, be sure to request the delivery specifications. 

## **SAFETY REMINDERS** 

Please pay sufficient attention to the warnings for safe designing when using these products. 

## **REMINDERS** 

- ~~O~~ The storage period is less than 12 months.  Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. 

~~O~~ Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). 

- ~~O~~ Before soldering, be sure to preheat components. 

The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. 

- ~~O~~ Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. 

- ~~O~~ When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. 

- O Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. 

- ~~O~~ Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. 

~~O~~ Use a wrist band to discharge static electricity in your body through the grounding wire. 

~~O~~ Do not expose the products to magnets or magnetic fields. 

~~O~~ Do not use for a purpose outside of the contents regulated in the delivery specifications. 

- ~~O~~ The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. 

   - The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. 

If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. 

- (1) Aerospace/Aviation equipment (8) Public information-processing equipment 

- (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment 

(3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications 

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 

20150203 / cmf_commercial_signal_mcz1210ch_en.fm 

(3/7) 

## **Common Mode Filters** 

## **For ultra high-speed differential signal line (HDMI, DVI)** 

**Product compatible with RoHS directive Halogen-free Compatible with lead-free solders** 

## **Overview of MCZ1210CH Type** 

## **FEATURES** 

Compact multilayer common mode filter. 

Widened frequency range for differential mode transmission up to 3.5GHz while ensuring common mode impedance. Suppresses common mode noise without influencing the high-speed differential transmission line signal. 

- Characteristics impedance for differential mode is 100 

Optimal for high-speed differential transmission lines, especially HDMI sink devices. 

## **APPLICATION** 

High-speed interfaces for electronic equipment (HDMI) 

TVs, DVCs, Mobile phones, PCs, DSCs, portable game machines, etc. 

|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|**PART NUMBER CONSTRUCTION**<br>MCZ<br>1210<br>CH<br>240<br>L2<br>T<br>**Series name**<br>**L×W×T Dimensions**<br>**Product internal**<br>**code**<br>**Impedance**<br>**Number of lines**<br>**Packaging style**<br>**(mm)**<br>**( ) at 100MHz**<br>~~|~~<br>~~1~~<br>~~1~~<br>~~____1_____1____1___—~~|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||||1210<br>1.25×1.0×0.5|||CH||||240<br>24|||L2<br>2 lines|||T<br>Taping||
|||||||||||||900<br>90||||||||



## **OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT** 

|**Type**|**Temperature range**<br>**Operating**<br>**temperature**<br>（**°C**）<br>**Storage**<br>**temperature**<br>（**°C**）|**Temperature range**<br>**Operating**<br>**temperature**<br>（**°C**）<br>**Storage**<br>**temperature**<br>（**°C**）|**Package quantity**<br>**(pieces/reel)**|**Individual weight**<br>（**mg**）|
|---|---|---|---|---|
|**MCZ1210CH**|–40 to +85|–40 to +85|4,000|3.0|



The Storage temperature range is for after the circuit board is mounted. 

RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20150203 / cmf_commercial_signal_mcz1210ch_en.fm 

(4/7) 

## **MCZ1210CH Type** 

## **RECOMMENDED REFLOW PROFILE** 

||||Preheating|Preheating||Soldering<br>T4<br>Peak|Soldering<br>T4<br>Peak|Soldering<br>T4<br>Peak|Soldering<br>T4<br>Peak|Natural<br>cooling|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|T:Temperature|T1|||T2|T3||t3|||T3|||
|||||t1|||t2||||||
||||||||||||||
|||||t:Time|||||||||
|**Preheating**|||||**Soldering**||||||**Peak**||
|**Temp.**|||**Time**||**Temp.**|||**Time**|||**Temp.**|**Time**|
|**T1**|**T2**||**t1**||**T3**|||**t2**|||**T4**|**t3**|
|150°C<br>180°C|||60 to 120s|60 to 120s|230°C||30 to 60s||||250 to 260°C|10s max.|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20150203 / cmf_commercial_signal_mcz1210ch_en.fm 

(5/7) 

**E M C C o m p o n e n t s** ~~ee~~ —™ **MCZ1210CH Type** 

**SHAPE & DIMENSIONS** 

**==> picture [366 x 436] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.0±0.15<br>0.55±0.1<br>4 3<br>1 2<br>a 0.3±0.1 Dimensions in mm<br>RECOMMENDED LAND PATTERN CIRCUIT DIAGRAM<br>0.3 4 3<br>o g Ea<br>1 2<br>• No polarity<br>oo<br>0.25 Dimensions in mm<br>0.15<br>±<br>1.25<br>0.1<br>±<br>0.5<br>0.5<br>0.7 to 0.75<br>**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20150203 / cmf_commercial_signal_mcz1210ch_en.fm 

(6/7) 

## **MCZ1210CH Type** 

## **ELECTRICAL CHARACTERISTICS** 

|**ELECTRICAL CHARACTERISTICS**<br>a|**ELECTRICAL CHARACTERISTICS**<br>a|**ELECTRICAL CHARACTERISTICS**<br>a||||||
|---|---|---|---|---|---|---|---|
|**CHARACTERISTICS SPECIFICATION TABLE**<br>**Common mode**<br>**DC resistance**<br>~~CS~~|||**Rated current**|**Rated voltage**|**Insulation**||**Part No.**|
|**impedance**|||||**resistance**|||
|**[100MHz]**||**[1 line]**||||||
|**(**<br>**)**|**Tolerance**|**(**<br>**)max.**|**(mA)max.**|**(V)max.**|**(M**|**)min.**||
|24|±25%|1.00|100|5|10||MCZ1210CH240L2T|
|90|±25%|3.00|100|5|10||MCZ1210CH900L2T|



|○Measurement equipment|||
|---|---|---|
|Measurement item|Product No.|Manufacturer|
|Common mode impedance|E4991A+16192A|Agilent Technologies|
|DC resistance|Type-7561|Yokogawa|
|Insulation resistance|4339B|Agilent Technologies|



- ＊ Equivalent measurement equipment may be used. 

## **IMPEDANCE VS. FREQUENCY CHARACTERISTICS** 

**==> picture [495 x 276] intentionally omitted <==**

**----- Start of picture text -----**<br>
10000<br>1000<br>900 Common mode<br>100<br>240 Common mode<br>10<br>900 Differential mode<br>240 Differential mode<br>1<br>1 10 100 1000 10000<br>Frequency (MHz)<br>○ Measurement equipment<br>Product No. Manufacturer<br>E4991A+16192A Agilent Technologies<br>＊ Equivalent measurement equipment may be used.<br>)Ω<br>Impedance (<br>**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20150203 / cmf_commercial_signal_mcz1210ch_en.fm 

(7/7) 

**E M C C o m p o n e n t s** ———oo tt— **—** “‘“_ **MCZ1210CH Type** 

## **PACKAGING STYLE** 

## **REEL DIMENSIONS** 

**==> picture [25 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
2.0±0.5<br>**----- End of picture text -----**<br>


**==> picture [182 x 163] intentionally omitted <==**

**----- Start of picture text -----**<br>
kL<br>1.0<br>ø13±0.2 8.4 [+2.0] –0.0<br>ø21±0.8 14.4max.<br>a TE<br>ø180±2.0<br>Dimensions in mm<br>ø60min.<br>**----- End of picture text -----**<br>


**==> picture [79 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
TAPE DIMENSIONS<br>**----- End of picture text -----**<br>


**==> picture [255 x 156] intentionally omitted <==**

**----- Start of picture text -----**<br>
e 1.5 [+0.1] 0 2.0±0.05 s 4.0±0.1 qT t<br>A 4.0±0.1 K<br>eSHOE e T<br>Dimensions in mm<br>Type A B K t<br>—————E MCZ1210CH 1.15±0.1 1.4±0.1 1.0max. 0.25±0.05<br>1.75±0.1<br>F<br>B 8.0±0.3<br>**----- End of picture text -----**<br>


**==> picture [326 x 57] intentionally omitted <==**

**----- Start of picture text -----**<br>
160min. Taping 200min.<br>E S T O<br>Drawing direction 300min. Dimensions in mm<br>**----- End of picture text -----**<br>


~~a~~ Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20150203 / cmf_commercial_signal_mcz1210ch_en.fm