M18GRXPQ

EZ-LIGHT® 2- or 3-Color General-Purpose Indicators Datasheet 

## Technical Information 

To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring, go to www.bannerengineering.com. 

- WARNING: • Do not use this device for personnel protection • Using this device for personnel protection could result in serious injury or death. • This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. 

## Models 

|Models|Models|Models|LED Colors — 2 or 3<br>Lights, Independently Selected|LED Colors — 2 or 3<br>Lights, Independently Selected|LED Colors — 2 or 3<br>Lights, Independently Selected|Construction|
|---|---|---|---|---|---|---|
||PNP Input|NPN Input|Color 1|Color 2|Color 3||
||M18GRXPQ|M18GRXNQ|Green|Red|—|Nickel-plated brass housing, thermoplastic<br>diffuser<br>Fully encapsulated<br>IP67|
||M18GXYPQ|M18GXYNQ|Green|—|Yellow||
||M18XRYPQ|M18XRYNQ|—|Red|Yellow||
||M18GRYPQ|M18GRYNQ|Green|Red|Yellow||
|ss|K30LGRXPQ|K30LGRXNQ|Green|Red|—|22 mm threaded polycarbonate base,<br>translucent polycarbonate dome<br>Fully encapsulated<br>IP67, IP69K per DIN 40050-9|
||K30LGXYPQ|K30LGXYNQ|Green|—|Yellow||
||K30LXRYPQ|K30LXRYNQ|—|Red|Yellow||
||K30LGRYPQ|K30LGRYNQ|Green|Red|Yellow||
|Ww|K50LGRXPQ|K50LGRXNQ|Green|Red|—|30 mm polycarbonate base, translucent<br>polycarbonate dome<br>Fully encapsulated<br>IP67, IP69K per DIN 40050-9|
||K50LGXYPQ|K50LGXYNQ|Green|—|Yellow||
||K50LXRYPQ|K50LXRYNQ|—|Red|Yellow||
||K50LGRYPQ|K50LGRYNQ|Green|Red|Yellow||
|C|K50FLGRXPQ|K50FLGRXNQ|Green|Red|—|ABS base, translucent polycarbonate<br>dome<br>Fully encapsulated<br>IP67, IP69K per DIN 40050-9|
||K50FLGXYPQ|K50FLGXYNQ|Green|—|Yellow||
||K50FLXRYPQ|K50FLXRYNQ|—|Red|Yellow||
||K50FLGRYPQ|K50FLGRYNQ|Green|Red|Yellow||
|©|K80LGRXPQ|K80LGRXNQ|Green|Red|—|Polycarbonate base, translucent<br>polycarbonate dome<br>Electronics fully encapsulated<br>IP67|
||K80LGXYPQ|K80LGXYNQ|Green|—|Yellow||
||K80LXRYPQ|K80LXRYNQ|—|Red|Yellow||
||K80LGRYPQ|K80LGRYNQ|Green|Red|Yellow||



The following models are no longer available for order, but are still covered by the information in this document. 

Original Instructions January 08, 2024 

© Banner Engineering Corp. 

p/n: 121899 Rev. M 

EZ-LIGHT® 2- or 3-Color General-Purpose Indicators Datasheet 

**==> picture [400 x 262] intentionally omitted <==**

**----- Start of picture text -----**<br>
LED Colors — 2 or 3<br>Models<br>Lights, Independently Selected Construction<br>PNP Input  NPN Input  Color 1  Color 2  Color 3<br>T18GRXPQ T18GRXNQ Green  Red  —<br>T18GXYPQ T18GXYNQ Green  —  Yellow  Thermoplastic polyester housing,<br>thermoplastic diffuser<br>T18XRYPQ T18XRYNQ —  Red  Yellow  Fully encapsulated<br>IP67<br>T18GRYPQ T18GRYNQ Green  Red  Yellow<br>T30GRXPQ T30GRXNQ Green  Red  —<br>T30GXYPQ T30GXYNQ Green  —  Yellow<br>T30XRYPQ T30XRYNQ —  Red  Yellow<br>Thermoplastic polyester housing,<br>T30GRYPQ T30GRYNQ Green  Red  Yellow  thermoplastic diffuser<br>Fully encapsulated<br>T30GRBPQ — Green  Red  Blue<br>IP67<br>T30GROPQ — Green  Red  Orange<br>— T30RGR5PNQ Red  Green  Red<br>T30RGXPQ — Red  Green  —<br>T8LGRXPQP T8LGRXNQP Green Red —<br>T8LGXYPQP T8LGXYNQP Green — Yellow<br>Polycarbonate/ABS alloy housing,<br>thermoplastic diffuser<br>IP67<br>T8LXRYPQP T8LXRYNQP — Red Yellow<br>**----- End of picture text -----**<br>


Models with a quick disconnect require a mating cordset. 

T8L Models: Standard 150 mm (6 in) PVC-jacketed cable with 4-pin M12 quick-disconnect connector models are listed. For integral 4-wire cabled model, omit suffix QP (for example, T8LGRXP ). 

K30L Models: Standard integral 4-pin M12 quick-disconnect connector models are listed. For 2 m (6.5 ft) integral 4-wire cabled model, omit suffix Q (for example, K30LGRXP ). For 150 mm (6 in) PVC-jacketed cable with 4-pin M12 quick-disconnect connector, replace suffix Q with QP (for example, K30LGRXPQP ). For terminal models, replace suffix Q with T (for example, K30LGRXPT ). 

K80L Models: Standard integral 4-pin M12 quick-disconnect connector models are listed. For terminal-wired model, omit suffix Q (for example, K80LGRXP ). 

T30 Models: Standard integral 4-pin M12 quick-disconnect connector models are listed. For 9 m (30 ft) PVC cable model, replace suffix Q with W/30 (for example, T30GRYP W/30). For 150 mm (6 in) PUR-jacketed cable with 4-pin quick-disconnect connector, replace suffix Q with QPMA (for example, T30GRYPQPMA ). 

Other Models: Standard integral 4-pin M12 quick-disconnect connector models are listed. For 2 m (6.5 ft) integral 4-wire cabled model, omit suffix Q (for example, M18GRXP ). For 150 mm (6 in) PVC-jacketed cable with 4-pin M12 quick-disconnect connector, replace suffix Q with QP (for example, M18GRXPQP ). 

Contact Banner Engineering for other colors and color combinations. 

## Wiring Diagrams 

**==> picture [392 x 86] intentionally omitted <==**

**----- Start of picture text -----**<br>
Multi Color Wiring<br>NPN PNP 1 = Brown<br>1 + 3 _ 2 = White 3 = Blue  C1 = Color 1 C2 = Color 2<br>4 4 4 = Black  C3 = Color 3<br>_ + 5 = Gray<br>3 1<br>2 2 Gray Wire not used in K30 Terminal models<br>**----- End of picture text -----**<br>


page 2 

January 08, 2024 

© Banner Engineering Corp. All rights reserved. 

EZ-LIGHT® 2- or 3-Color General-Purpose Indicators Datasheet 

**==> picture [500 x 130] intentionally omitted <==**

**----- Start of picture text -----**<br>
Single Color Wiring<br>NPN PNP<br>**----- End of picture text -----**<br>


## Specifications 

Supply Voltage and Current 

T8L models: 10 V DC to 30 V DC at 20 mA maximum 

- T18, M18, and K30L models: 10 V DC to 30 V DC at 25 mA maximum per LED color 

T30 models: 10 V DC to 30 V DC at 40 mA maximum per LED color 

- K50L, K50FL, and K80L models: 18 V DC to 30 V DC at 40 mA maximum per LED color 

## Indicators 

Entire translucent diffuser or dome provides indication. Green and yellow, when connected to discrete output of 3-wire or 4- wire sensors. For other colors, contact factory for availability. 

## Input Response Time 

Indicator ON/OFF: 1 ms max. 

Operating Conditions 

Temperature: –40 °C to +50 °C (–40 °F to +122 °F) 

## Environmental Rating 

Rated IP67. T8L not encapsulated; K80L has encapsulated electronics only; other models fully encapsulated. 

   - K30L, K50L, and K50FL QD models meet IP69K per DIN 40050-9. 

   - Cabled models also meet IP69K if the cable and cable entrance are protected from high-pressure spray. 

- Connections 

T8L models: 150 mm (6 in) PVC-jacketed cable with a 4-pin M12 male quick-disconnect connector (QP) or 2 m (6.5 ft) unterminated 4-wire integral cable, depending on model K30L models: Integral 4-pin M12 male quick-disconnect connector (Q), 150 mm (6 in) PVC-jacketed cable with a 4-pin M12 male quick-disconnect connector (QP), 2 m (6.5 ft) unterminated 4-wire integral cable, or 5 color-coded screw terminal for up to 16 AWG wire, depending on model. Screw terminal max torque: 0.11 N·m (1.0 lbf·in). 

K80L models: Integral 4-pin M12 male quick-disconnect connector (Q) standard; terminal-wired models available for use with bulk cable; compression fitting optional. Contact Factory for cable information. 

- Other models: Integral 4-pin M12 male quick-disconnect connector (Q), 150 mm (6 in) PVC-jacketed cable with a 4-pin M12 male quick-disconnect connector (QP), or 2 m (6.5 ft) unterminated 4-wire integral cable, depending on model 

## Construction 

See Models lists 

Required Overcurrent Protection 

**==> picture [32 x 42] intentionally omitted <==**

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. 

Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

**==> picture [238 x 216] intentionally omitted <==**

**----- Start of picture text -----**<br>
Supply  Supply<br>Required Overcurrent  Required Overcurrent<br>Wiring  Wiring<br>Protection (A) Protection (A)<br>(AWG) (AWG)<br>20 5.0 26 1.0<br>22 3.0 28 0.8<br>24 1.0 30 0.5<br>Certifications<br>All models:<br>Banner Engineering BV<br>Park Lane, Culliganlaan 2F bus 3<br>1831 Diegem, BELGIUM<br>K50L, K50FL, T18, and T30 models only:<br>K30L and K50L models only:<br>**----- End of picture text -----**<br>


## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. 

January 08, 2024 

page 3 

© Banner Engineering Corp. All rights reserved. 

EZ-LIGHT® 2- or 3-Color General-Purpose Indicators Datasheet 

**==> picture [500 x 524] intentionally omitted <==**

**----- Start of picture text -----**<br>
 T8L Models   T18 Models   M18 Models<br>15. 8 mm (0.62")<br>8.8 mm (0.35") Ø16.5 mm<br>(0.65")<br>M18 x 1 53.6 mm<br>19.1 mm (0.75") Thread (2.11") 61 mm<br>(2.4")<br>30 mm<br>33.0 mm (1.2")<br>M8 X 1 (1.3")<br>Ø 15 mm<br>M12 X 1 (0.59") M18 X 1 23 mm<br>M12 X 1 (0.9")<br> T30 Models   K30L Models   K30 Terminal Models<br>Ø 40.0 mm 30.0 mm (1.18")<br>(1.57")<br>63.7 mm<br>M30 x 1.5 (2.51") 58.0 mm  42<br>Thread (2.28") [1.65] 52.4<br>[2.06]<br>45.0 mm 31.0 mm  M22 X 1.5 -6g<br>M12 X 1 (1.77") (1.22") M22 X 1.5<br>16.0 mm (0.63")<br>Ø 15 mm<br>(0.59") M12 X 1<br>K50L Models   K50FL Models   K80L Models<br>50.0 mm<br>(1.97") 44.6 [1.76"] 80.8 mm<br>(3.18")<br>Ø50 [1.97"] 65.0 mm(2.56") 66.3 mm(2.61") 109.5 mm(4.31")<br>M30 x 1.5  38 mm (1.50")* 60.0<br>Max. Torque 4.5 Nm (mounting nut (40 in-lbf)included) [2.36"] [1.38"]35.0 65.0 mm(2.56")<br>20 mm (0.79") 2x 5.0 [0.20"]<br>Max. Torque 2.25 NmInternal Threads ½ - 14 NPSM (20 in-lbf) 11 mm (0.43") 16.0 [0.63"] 40.0 [1.58"]2x 5.0 [0.20"]2x 5.5 [0.21"] 17.0 [0.67"] Max. Torque 1.12 Nm (10 in–lbf) 4X Ø 5.5 mm (Ø 0.22") with supplied screws 26.0 mm(1.02") Internal Threads ½ - 14 NPSM Max. Torque 2.25 Nm (20 in–lbf)<br>4X 8–32 UNC  M12 X 1<br>Max. Torque 1.12 Nm (10 in–lbf)<br>**----- End of picture text -----**<br>


January 08, 2024 

page 4 

© Banner Engineering Corp. All rights reserved. 

EZ-LIGHT® 2- or 3-Color General-Purpose Indicators Datasheet 

## Accessories 

## Cordsets 

**==> picture [500 x 276] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin Threaded M12 Cordsets—Single Ended<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC-406 2 m (6.56 ft)  44 Typ.<br>MQDC-415 5 m (16.4 ft)<br>MQDC-430 9 m (29.5 ft)  2<br>M12 x 1 1<br>Straight  ø 14.5 3<br>Ø5.2 mm 4 5<br>MQDC-450 15 m (49.2 ft)<br>7 mm<br>58 mm<br>1 = Brown<br>MQDC-406RA 2 m (6.56 ft)  32 Typ. 2 = White<br>[1.26"] 3 = Blue<br>MQDC-415RA 5 m (16.4 ft)  4 = Black<br>5 = Unused<br>MQDC-430RA 9 m (29.5 ft)<br>30 Typ. 2<br>[1.18"] 3<br>1<br>Right-Angle  4<br>M12 x 1<br>ø 14.5 [0.57"]<br>MQDC-450RA 15 m (49.2 ft)<br>Ø5.2 mm<br>7 mm<br>58 mm<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

Document title: EZ-LIGHT™ 2- or 3-Color General-Purpose Indicators Part number: 121899 Revision: M Original Instructions © Banner Engineering Corp. All rights reserved. 

**==> picture [80 x 43] intentionally omitted <==**

**----- Start of picture text -----**<br>
121899<br>**----- End of picture text -----**<br>


January 08, 2024 

page 5 

© Banner Engineering Corp. All rights reserved.