LED2472MA2

**DIGITAL METERS** 

**==> picture [518 x 322] intentionally omitted <==**

**----- Start of picture text -----**<br>
2002/95/EC VOLT / AMP / PROCESS LED2472V / A / P / T<br>PROGRESS LED2472A/TI LED2472V<br>@vienu<br>VERY COMPACT :   3/64 DIN - 24 X 72 mm.<br>LUMINOUS :  14 mm LED for easy reading.<br>EASY :  Quick installation without tools. LED2472P<br>- Disconnect screw terminal blocks.<br>CONFIGURABLE :  By button in front panel,<br>- DC / AC / AUTO on voltmeter & ammeter.<br>- 0-10V / 0-20mA / 4-20mA on process<br>- High and low adj. limits of -1999 to 9999<br>PRACTICAL :  Direct Power supply +5 V or 7,5 V to 12 V.<br>- Optional power supply until 250 VAC isolated*.<br>PROTECTION :  Front : IP55 and case : IP31.<br>LED24 OPTION power supply :  OPTION : SH10020*<br>With power supply AL48250* or AL1040* (For gauge 100mV)<br>2000 POINTS<br>3 DIGITS1/2<br>Ref. Weight<br>ADJUSTABLE ce, —— AL48250 57g<br>AL1040 65g<br>Volt, Amp. PROCESS LED2472V / A /P 72g<br>+ Version for TI 5A ote SH10020 72g<br>**----- End of picture text -----**<br>


## **Specifications** 

## **General** 

- Readout : 31/2 digits 14 mm red LED displays. • Accuracy : ± 0,1%, + 1 digit on DC mode. ± 0,25%, + 1 digit on RMS mode. 

- Frequency measurement limit (RMS mode) : 40 to 750 Hz. 

- Power supply : + 5 Volts, ± 5% regulated, or + 7,5 to 12 Volts rectified and filtered. 

- Current consumption : 160mA. 

- Temperature drift  : 0,011% / °C. 

- Display's cadency : 1,3 per second on DC mode. 0,5 to 1,5 per second RMS on AC mode. 

- Red antireflection filter. 

- The measurement input (e-) and power supply-grounds are common except in case of the use of one of the optional power supplies. 

- Configuration : By button in front of panel 

   - DC, AC, AUTO mode and decimal point on voltmeter & ammeter 

   - 0-10V / 0-20mA / 4-20mA, decimal point & limit display on process 

- Presentation : Display of the AC tension presence. Two clips on its sides that allow a fast assembly without tools on any surface with a thickness included between 0,8 and 5 mm. Front : IP55 and case : IP31. 

- Cut-out dimensions : 22,2 x 68 mm minimum and 22,5 x 68,8 mm maximum. The face of the case respects the DIN norms : 24 x 72 mm, depth : 49 mm and 96 mm with optional accessories. 

- Connection : plug-in connector to wire up 2.5mm² 

- Optional accessories : 

**Power supplies** *AL48250 : High tension (galvanic insulation 4 KV) Input : from 40 to 250V AC or 

- from 40 to 350V DC 

- *AL1040 : Low tension (galvanic insulation 4 KV) Input : from 9 to 28V AC or from 8 to 40V DC 

- **Shunt** *SH10020 : 20A 100mV shunt, 0,5 class, DIN rail mounting 

## **Available range** 

|**Available range**|**Available range**||||
|---|---|---|---|---|
|Gauges available by each reference in = and ~ :<br>LED2472V<br>LED2472A<br>Lect. en =<br>Lect. en ~|||||
|2 V<br>2 mA<br>-1,999 à 1,999<br>1,400 max.<br>20 V<br>20 mA<br>-19,99 à 19,99<br>14,00 max.<br>200 V<br>200 mA<br>-199,9 à 199,9<br>140,0 max.<br>500 V<br>-500 à 500<br>500 max.<br>2 A<br>-1,999 à 1,999<br>1,400 max.<br>100 mV (SH10020*)<br>-19,99 à 19,99<br>14,00 max.<br>Z input : 4 MΩ<br>Voltage drop : 100mV<br>Gauges available by each reference in ~:<br>Gauges available in = :<br>~~a~~<br>~~i~~<br>~~a~~<br>~~i~~<br>~~a~~<br>~~i~~<br>~~a~~<br>~~i~~<br>~~a~~<br>~~i~~<br>~~a~~<br>~~i~~<br>fp|||||
|LED2472T/TI400|LED2472T/TI800<br>LED2472P<br>Lect. en =||||
|400 A<br>300 A|800 A<br>0 - 10 V ou 0 - 5V<br>0 à 100,0 % *<br>600 A<br>0 - 20 mA<br>0 à 100,0 % *||||
|200 A|400 A<br>4 - 20 mA<br>0 à 100,0 % *||||
|100 A|200 A<br>Input impedance in voltage : 4 MΩ||||
|40 A<br>30 A<br>20 A<br>10 A<br>TI secondary : 5 A|80 A<br>Input impedance in current : 10 Ω<br>60 A<br>40 A<br>20 A<br>TI secondary : 5 A<br>TI secondary : 5 A<br>*** High and low adjustable limit of**<br>**-1999 to 9999.**<br>Delivered in 4-20mA with display<br>0 - 100%||Delivered in 4-20mA with display||



**Note :** The selected gauge will be that configured and calibrated for the delivery. The other gauges will have an accuracy of 1%. 

**85 | www.elc.fr**