LDO10C-005W05-VJ

## **ARTESYN LDO10C SERiES** 

50 Watts 

Advanced Energy's Artesyn LDO10C series non-isolated DC-DC converter is designed for cost- and space-sensitive applications. It has a wide 3–13.8 Vdc input range and offers a 0.59–5.1 Vdc adjustable output that accommodates a wide variety of silicon power needs. Capable of delivering up to 10 amps, the converter has a typical efficiency of 94%. A remote enable facility is provided as standard. 

## **Data Sheet** 

## **Total Power:** 

**50 Watts** 

## **input Voltage:** 

**3 - 13.8 Vdc** 

**# of Outputs:** 

**Single** 

## **SPECiAL fEATuRES** 

   - Small package 

   - Termination voltage capability 

- 10 A output current rating 

   - RoHS compliant 

- Input voltage range: 3 - 13.8 Vdc 

- Adjustable output voltage: 0.59 - 5.1 V 

- Excellent transient response 

- Power enable (5-pin model) 

## **SAfETY** 

   - UL, cUL 60950-1 

   - TÜV Product Service (EN60950) 

   - CE 

- Minimum airflow 

©2020 Advanced Energy Industries, Inc. 

**LDO10C** 

**==> picture [479 x 400] intentionally omitted <==**

**----- Start of picture text -----**<br>
ELECTRiCAL SPECifiCATiONS<br>input<br>Input voltage ra nge 3 - 13.8 Vdc<br>Input current Minimum load  50 mA<br>Remote OFF 5 mA<br>Input current (max.) See Note 3 10 A @ lo max.<br>Start-up time Power up  3 ms<br>Remote ON/OFF 2 ms<br>Output<br>Output voltage See Note 5 0.59 - 5.1 V<br>Output setpoint accuracy 0.1% trim resistors ±1.0%<br>Line regulation Low line to high line ±0.2%<br>Load regulation Full load to min. load ±0.5%<br>Min./max. load 0 A/10 A<br>Overshoot At turn-on 0.5% max.<br>Undershoot At turn-off 100 mV max.<br>Ripple and noise   See Note 1 20 mV<br>5 Hz to 20 MHz Vin = 5 V, Vout = 2.5 V<br>Transient response See Note 1, 2 130 mV max. deviation 15 μs recovery to within<br>regulation band<br>General<br>Efficiency (high input) Vin = 5 V, Vo = 2.5 V, lo = 6 A 91%<br>Switching frequency Fixed 620 kHz<br>Material flammability UL94V-0<br>Weight 1.899 g (0.067 oz.)<br>MTBF 12 V @ 40 °C, 100% load   >8,222,210 hours<br>Bellcore 332<br>Coplanarity Surface mount models 150 μm<br>**----- End of picture text -----**<br>


## **ENViRONmENTAL SPECifiCATiONS** 

**==> picture [479 x 102] intentionally omitted <==**

**----- Start of picture text -----**<br>
Thermal performance Operating ambient temperature -40 °C to +85 °C<br>See Note 5 Non-operating ambient temperature -40 °C to +125 °C<br>Protection<br>Short-circuit Hiccup, non-latching<br>Recommended System Capacitance<br>input See Note 6 0 μF<br>Output See Note 7 0 μF<br>**----- End of picture text -----**<br>


**2 advancedenergy.com** 

**LDO10C** 

## **ORDERiNG iNfORmATiON** 

**==> picture [479 x 87] intentionally omitted <==**

**----- Start of picture text -----**<br>
model   Output Power input Output Output Current Output Current Efficiency  Regulation<br>Number (3,5) (max.) Voltage Voltage (min.) (max.) (Typical) Line Load<br>LDO10C-005W05-VJ 50 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 10 A 94% ±0.2% ±0.5%<br>LDO10C-005W05-V1J 50 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 10 A 94% ±0.2% ±0.5%<br>LDO10C-005W05-HJ 50 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 10 A 94% ±0.2% ±0.5%<br>LDO10C-005W05-SJ 50 W 3 - 13.8 Vdc 0.59 - 5.1 V 0 A 10 A 94% ±0.2% ±0.5%<br>**----- End of picture text -----**<br>


## **PART NumbER SYSTEm WiTH OPTiONS** 

|**Product family**||**Rated Output**<br>**Current**||**Performance**||**input Voltage**||**Number of Pins**<br>**Type of Output**||**Output Voltage**||**mounting Option**||**Custom Option**||**RoHS Compliance**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|**LDO**||**10**||**C**||**00**||**5W**||**05**||**V**||**1**||**J**|
|**Product family**<br>LDO = LDO Series||**Rated Output**<br>**Current**<br>10 = 10 Amp||**Performance**<br>C = Cost<br>Optimized||**input Voltage**<br>00 = 3 - 13.8 V||**Type of Output**<br>5 W = 5 Pins and<br>Wide Output||**Output Voltage**<br>05 = 0.59 - 5.1 V||**mounting Option**<br>V = Vertical<br>H = Horizontal<br>S = SMT||**Custom Option**<br>1 =  Vertical,<br>0.199” pin<br>length||**RoHS Compliance**<br>J = Pb free (RoHS<br>6/6 compliant)|



## **OuTPuT VOLTAGE ADJuSTmENT Of THE LDO10C SERiES** 

The ultra-wide output voltage trim range offers major advantages to users who select the LDO10C series.  It is no longer necessary to purchase a variety of modules in order to cover different output voltages.  The output voltage can be trimmed in a range of 0.59 - 5.1 Vdc.  When the LDO10C converter leaves the factory, the output has been adjusted to the default voltage of 0.59 V. 

## **Notes** : 

1.  Measured as per recommended system capacitance. See Application Note 186. 

2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo to full lo and full lo to 0.50. 

3. External input fusing is recommended. 

4. Additional part numbers may be available with different output voltages. 

5. Airflow dependent, 100 LFM minimum required. 

6. No capacitors needed for ripple current stability. 

7. No capacitors needed for stability. 

8.  NOTICE: the input voltage must be greater than the programmed output voltage. The max duty cycle is 95%. These non-isolated dc-dc modules are buck converters. 

**==> picture [241 x 121] intentionally omitted <==**

**----- Start of picture text -----**<br>
4 Vout<br>Rem ote O N/O FF<br>1<br>LD O10C<br>R<br>Vin 2 3 5 C out LO<br>A<br>D<br>C in<br>R trim<br>(f or trim<br>dow n)<br>G ND<br>**----- End of picture text -----**<br>


**advancedenergy.com       3** 

**LDO10C** 

## **mECHANiCAL DRAWiNGS** 

## **Vertical mount (model LDO10C-005W05-VJ)** 

Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 

**==> picture [479 x 173] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pin Assignments .410 .460 MAX<br>.055 REF<br>Pin No. Function<br>.062 REF<br>1 Enable<br>.030<br>2 Vin<br>3 Common/RTN<br>4 Vout .650<br>5 Trim<br>.34<br>5 1<br>.131<br>.160±.010<br>.071 .050<br>4X .067 .025 .001<br>TYP SQ PINS TYP<br>**----- End of picture text -----**<br>


## **Vertical mount (model LDO10C-005W05-V1J)** 

Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 

|**Pin Assignments**|**Pin Assignments**|
|---|---|
|_Pin No._|_Function_|
|1<br>2<br>|Enable<br>Vin<br>|



**==> picture [298 x 168] intentionally omitted <==**

**----- Start of picture text -----**<br>
.410 .460 MAX<br>.055 REF<br>.062 REF<br>.030<br>.650<br>.34<br>.131<br>.199±.010<br>.071 .050<br>4X .067<br>TYP .025 .001<br>SQ PINS TYP<br>**----- End of picture text -----**<br>


**4 advancedenergy.com** 

**LDO10C** 

## **mECHANiCAL DRAWiNGS (CONTiNuED)** 

## **Horizontal mount (model LDO10C-005W05-HJ)** 

Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 

**==> picture [479 x 228] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pin Assignments .545 MAX<br>Pin No. Function .410 .055 REF<br>1 Enable<br>.050 6 .062 REF<br>2 Vin<br>3 Common/RTN<br>4 Vout<br>5 Trim<br>6 Mech Pin<br>.650 .580<br>.025±.001<br>SQ PIN TYP<br>5 1 6 PLACES<br>.035<br>.125 TYP<br>.071 .120 TYP<br>4X .067<br>TYP<br>**----- End of picture text -----**<br>


## **Surface mount (model LDO10C-005W05-SJ)** 

Dimensions in inches (mm). Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 

**==> picture [478 x 192] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pin Assignments 0.52 (13.13)<br>Pin No. Function 6 0.410 (10.41) 0.062 (1.57) REF<br>7<br>1 Enable 7 6<br>2 Vin<br>3 Common/RTN 0.650 (16.51)<br>LDO10C-<br>4 Vout 005W05-<br>5 Trim<br>6 Mech Pin 5 1 0.040 (1.02)<br>REF<br>7 Mech Pin<br>1 5<br>0.035 (0.89)<br>REF 0.055 (1.40) REF 0.025 (0.64) REF<br>0.125 (3.18) TYP<br>0 (0.00) 0.050 (1.27) 0.071 (1.80) 0.138 (3.51) 0.205 (5.21) 0.272 (6.91) 0.339 (8.61) 0.360 (9.14)<br>**----- End of picture text -----**<br>


**advancedenergy.com       5** 

**==> picture [596 x 270] intentionally omitted <==**

## **AbOuT ADVANCED ENERGY** 

Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. 

Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. 

For international contact information, visit advancedenergy.com. 

powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 

Specifications are subject to change without notice. Not responsible for errors or omissions. ©2020 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. 

ENG-LDO10C-235-01 12.25