KPEG106-HS

| : 

: : : 

**==> picture [491 x 666] intentionally omitted <==**

**----- Start of picture text -----**<br>
SPECIFICATION FOR APPROVAL<br>| Description : PiezoAudioTransducer<br>Kingstate Part No. KPEG106-HS<br>| Customer's Model No. :<br>|<br>Specification No. PKD-5015<br>| Number Of The Edition : 1.2<br>_ CUSTOMER’S APPROVED SIGNATURE |<br>| 4&8 SFARA] KINGSTATE ELECTRONICS CORP.<br>Address: 10F, No. 69-14, Sec. 2, Chung Cheng E. Rd., Tamshui County, Taipei Hsien, Taiwan, R.O.C.<br>a Intemational sales dept: TEL:886-2-2809-5651 FAX:886-2-2809-7151<br>Domestic sales dept: TEL:886-2-2809-0668  FAX:886-2-28096748<br>: http:/Awww.kingstate.com.tw<br>| | Approved by =| =~ Checkedby | Issued by |<br>: i BoKee fea WB, oo | anteOM 2A/tt! :<br>**----- End of picture text -----**<br>


**==> picture [18 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
|<br>**----- End of picture text -----**<br>


## **A. SCOPE** 範疇 

This specification applies piezo audio transducer, **KPEG106-HS** 此規格書適用於壓電式蜂鳴器, **KPEG106-HS** 

## **B. SPECIFICATION** 規格 

|**No.**|<br>**Item**|**Unit**|**Specification**|**Condition**|
|---|---|---|---|---|
|1|Operating Volt.<br>操作電壓|Vp-p|MAX 30||
|2|Current consumption|mA|MAX 18|at 10Vp-p,square wave,2.4KHz.|
||消耗電流||||
|3|Sound pressure level<br>輸出音壓|dB|MIN 88|at 10cm/10Vp-p,square wave,2.4KHz.|
|4|Electrostatic capacity<br>靜電容量|pF|90,000 ± 30%|at 1KHz/1V|
|5|Operating temp.<br>操作溫度|℃|-30 ~ +105|SPL Min80dB at “3” condition<br>音壓Min80dB，在第三項測試條件|
|6|Storage temp.<br>儲存溫度|℃|-40 ~ +105||
|7|Dimension<br>尺寸|mm|φ22.8 x H13.5|See appearance drawing<br>請參照外觀尺寸圖|
|8|Weight (MAX)<br>重量|gram|11.6||
|9|Material<br>材質||PC<br>（BLACK）||
|10|Terminal<br>端子||Pin type<br> (鍍全錫PlatingSn)|See appearance drawing<br>請參照外觀尺寸圖|
|11|Environmental<br>Protection Regulation<br>環保法規||RoHS||



## **C. APPEARANCE DRAWING** 外觀尺寸圖 

**==> picture [106 x 107] intentionally omitted <==**

**==> picture [285 x 234] intentionally omitted <==**

**----- Start of picture text -----**<br>
移印周期字樣<br>   (金色油墨)<br>年份 月份<br>11--- 2011 01<br>12--- 2012 02<br>**----- End of picture text -----**<br>


**Tol : ± 0.5 Unit : mm** 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 2/5 KPEG106-HS** 

## **D. TYPICAL FREQUENCY RESPONSE CURVE** 頻率響應曲線 

## **E. MEASURING METHOD** 測量方法 

S.P.L. Measuring Circuit 音壓測試接線圖 Input Signal: 10Vp-p,2.4kHz, Square Wave 輸入信號: 10Vp-p,2.4kHz,方波 

Mic : RION S.P.L meter UC30 or equivalent 

Mic : RION 噪音計 UC30 或同等品 

- S.G : Hewlett Packard 33120A Function Generator or equivalent S.G : Hewlett Packard 33120A 函數信號產生器或同等品 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 3/5 KPEG106-HS** 

## **F. MECHANICAL CHARACTERISTICS** 機械特性 

|**No.**|**Item**|**Test Condition**|**Evaluation standard**|
|---|---|---|---|
|1|Solderability<br>焊錫附著性|Lead terminals are immersed in rosin for 5 seconds and then immersed<br>in solder bath of +270±5℃for 3±1 seconds.<br>端子部份浸入松香溶液5秒後,再浸入+270±5℃溶融焊鍚槽中3±1秒.|90% min. lead terminals shall be<br>wet with solder. (Except the<br>edge of terminal)<br>浸入端子部份附著焊鍚90%以<br>上.(末端斷面不算)|
|2|Soldering Heat<br>Resistance<br>焊錫耐熱性|Lead terminal are immersed up to 1.5mm from sounder’s body in soilder<br>bath of +300±5℃for 3± 0.5 seconds or +260±5℃for 10±1 seconds.<br>距離端子根部1.5mm的位置,浸入+300±5℃的焊鍚槽3±0.5秒,<br>或+260±5℃ 的焊錫槽10±1秒.|No interference in operation<br>操作上無任何不良|
|3|Terminal Mechanical<br>Strength<br>端子強度|<br>The force 10 seconds of 9.8N (1.0kg) is applied to each terminal in axial<br>direction.<br>各端子的軸方向施以9.8N (1.0kg)的力量10秒.|No damage and cutting off<br>端子不鬆動,不脫落|
|4|Vibration<br>振動試驗|Buzzer shall be measured after being applied vibration of amplitude of<br>1.5mm with 10 to 55hz band of vibration frequency to each of 3<br>per-pendicular directions for 2 hours.<br>振動週波數10～55HZ、全振幅1.5mm於X.Y.Z 3個方向,各2小時.|<br> <br>The value of oscillation<br>frequency/ current consumption<br>should be in 10% compared with<br>initial ones .The SPL should be<br>in ± 10dB compared with initial<br>one.<br>諧振頻率與消耗電流變化量須在<br>±10%內.輸出音壓變化量須在<br>±10dB內.|
|5|Drop test<br>落下測試|The part only shall be dropped from a height of 75cm onto a 40mm thick<br>wooden board 3 times in 3 axes (X.Y.Z). (a total of 9 times).<br>單體從75公分高處, X.Y.Z.3個方向,各3回,落於40mm厚木板上.||



## **G. ENVIRONMENT TEST** 環境測試 

|**No.**|**Item**|**Test Condition**|**Evaluation standard**|
|---|---|---|---|
|1|High temp. test<br>高溫測試|After being placed in a chamber at +105℃for 240 hours<br>置於+105℃環境中240小時|<br>Being placed for 4 hours at<br>+25℃, buzzer shall be<br>measured.  The value of<br>oscillation frequency/ current<br>consumption should be in ±10%<br>compared with initial ones .The<br>SPL should be in ±10dB<br>compared with initial one.<br>經測試後,靜置於+25℃（室溫）<br>環境中4小時後,諧振頻率與消耗<br>電流變化量須在±10%內.輸出音<br>壓變化量須在±10dB內.|
|2|Low temp. test<br>低溫測試|After being placed in a chamber at –40℃for 240 hours<br>置於-40℃環境中240小時||
|3|Humidity test<br>相對濕度測試|After being placed in a chamber at +40℃and 90±5% relative humidity<br>for 240 hours<br>置於+40℃, 相對濕度90±5%環境中240小時||
|4|Temp. cycle test<br>溫度循環試驗|The part shall be subjected to 5 cycles. One cycle shall be consist of::<br>單體承受溫度循環測試5次,其循環內容如圖示:<br>+105℃<br>+25℃+25℃<br>-40℃<br>0.5hr  0.5hr  0.25  0.5hr   0.5hr   0.5hr  0.25<br>3hours||



志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 4/5 KPEG106-HS** 

## **H. RELIABILITY TEST** 信賴性測試 

**No. Item Test condition** 1.Continuous life test 高溫壽命測試(連續) 48 hours continuous operation at +90℃ with rated voltage applied. 在+90℃環境下,以額定電壓連續操作 48 小時 Operating life 2.Intermittent life test 室溫壽命測試(間歇) 1 test A duty cycle of 1 minute on, 1 minutes off, a minimum of 5000 times at room 壽命測試 temp.( +25 ±2℃)and rated voltage applied 在室溫下(+25 ±2℃), 以額定電壓操作, 通電 1 分鐘/斷電 1 分鐘,測試 5000 次循環. 

## **Evaluation standard** 

Being placed for 4 hours at +25℃, buzzer shall be measured.  The value of oscillation frequency/ current consumption should be in ±10% compared with initial ones .The SPL should be in ±10dB compared with initial one. 經測試後, 靜置於+25℃（室溫） 環境中 4 小時後,諧振頻率與消耗 電流變化量須在±10%內. 輸出音 壓變化量須在±10dB 內. 

## **TEST CONDITION.** 

Standard Test Condition : a) Temperature : +5 ~ +35 ℃ b) Humidity : 45-85% c) Pressure : 860-1060mbar 一般測試條件 : a) 溫度 : +5 ~ +35 ℃ b) 濕度 : 45-85% c) 氣壓 : 860-1060mbar Judgement Test Condition : a) Temperature : +25 ± 2 ℃ b) Humidity : 60-70% c) Pressure : 860-1060mbar 爭議時測試條件 : a) 溫度 : +25 ± 2 ℃ b) 濕度 : 60-70% c) 氣壓 : 860-1060mbar 

## **I. PACKING STANDARD** 包裝規格 

志豐電子股份有限公司 **KINGSTATE ELECTRONICS CORP 5/5 KPEG106-HS**