K50LGRY2PQ.

## EZ-LIGHT Indicators for 3-Color, 7-Function 

## Datasheet 

DC-operated LED indicators with solid ON or flashing capability and an integral M12 quick-disconnect connector1 Choose from red, yellow, or green ON, flashing, or rotating (depending on wiring) 2. 

To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring, go to www.bannerengineering.com. 

## WARNING: 

- Do not use this device for personnel protection 

- Using this device for personnel protection could result in serious injury or death. 

- This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. 

## Models 

|Models|Models|Construction|Inputs|
|---|---|---|---|
||M18GRY2PQ|Nickel-plated brass housing, M18x1 thread; thermoplastic<br>diffuser. Fully encapsulated; IP67.|PNP|
||M18GRY2NQ||NPN|
|Ww|K50LGRY2PQ|30 mm threaded polycarbonate base, translucent<br>polycarbonate dome. Fully encapsulated; IP67, IP69K per DIN<br>40050-9.<br>|PNP|
||K50LGRY2NQ<br>||NPN<br>|
||K50FLGRY2PQ<br>|Polycarbonate base, translucent polycarbonate dome. Fully<br>encapsulated; IP67, IP69K per DIN 40050-9.<br>|PNP<br>|
||K50FLGRY2NQ<br>||NPN<br>|
|~~©~~|K80LGRY2PQ<br>3<br>~~©~~|ABS and polycarbonate base, translucent polycarbonate dome.<br>Electronics fully encapsulated; IP67.<br>~~©~~|PNP<br>~~©~~|
||K80LGRY2NQ<br>~~©~~||NPN<br>~~©~~|



The following models are no longer available for order, but are still covered by the information in this document. 

Other Models: Standard integral quick-disconnect connector models are listed (mating cordset required). To order 2 m (6.5 ft) cabled models, omit suffix Q from model number (example, M18GRY2P). To order models with 150 mm (6 in) PVC-jacketed cable with 5-pin M12 quick-disconnect connector, replace suffix Q with QP (example, M18GRY2PQP). 

## Wiring 

Table 1: Select from 7 operating schemes, depending on wiring 

|LED Function|PNP Models|PNP Models|PNP Models|PNP Models|NPN Models|NPN Models|NPN Models|NPN Models|
|---|---|---|---|---|---|---|---|---|
||Brown Wire|White Wire|Black Wire|Blue Wire|Blue Wire|White Wire|Black Wire|Brown Wire|
|Red ON|+V DC|||0 V DC|0 V DC|||+V DC|
|Red Flashing|+V DC||+V DC|0 V DC|0 V DC||0 V DC|+V DC|
|Yellow ON||+V DC||0 V DC||0 V DC||+V DC|
|Yellow Flashing|+V DC|+V DC||0 V DC|0 V DC|0 V DC||+V DC|



- 1 Pin 5 is not used; connects to 4-wire quick-disconnect cordset. If a cordset other than those specified in this document is used, use a 5-pin mating cordset. 

- 2 Contact Factory for other colors/color combinations, including: blue, white, orange. 

- 3 K80L Models: Standard integral 5-pin M12 quick-disconnect connector models are listed (mating cordset required). For terminal-wired model, omit suffix Q (example, K80LGRY2P). 

Original Document 121902 Rev. L 

29 July 2022 

121902 

EZ-LIGHT Indicators for 3-Color, 7-Function 

|LED Function|PNP Models|PNP Models|PNP Models|PNP Models|NPN Models|NPN Models|NPN Models|NPN Models|
|---|---|---|---|---|---|---|---|---|
||Brown Wire|White Wire|Black Wire|Blue Wire|Blue Wire|White Wire|Black Wire|Brown Wire|
|Green ON|||+V DC|0 V DC|||0 V DC|+V DC|
|Green Flashing||+V DC|+V DC|0 V DC||0 V DC|0 V DC|+V DC|
|Rotating<br>Red-Green-Yellow|+V DC|+V DC|+V DC|0 V DC|0 V DC|0 V DC|0 V DC|+V DC|



## Table 2: Only quick-disconnect wiring is shown; cabled wiring is functionally identical. 

**==> picture [292 x 133] intentionally omitted <==**

**----- Start of picture text -----**<br>
PNP Models NPN Models<br> ping eT otk__< ping3<br>__¢ pintping uea z obt__<own Pin Pina<br>P i ,n3 bn Pin11<br>- +<br>G = Green<br>R = Red<br>Y = Yellow<br>X = Not Used<br>**----- End of picture text -----**<br>


## Specifications 

## Supply Voltage and Current 

- M18 Models: 10 V DC to 30 V DC at 40 mA max. 

T30 Models: 10 V DC to 30 V DC at 50 mA max. 

- K50L, K50FL and K80L Models: 18 to 30 V DC at 50 mA max. 

- Indicators 

Entire translucent diffuser or dome provides indication. LEDs are independently selected: Green, Red, Yellow, ON steady or flashing. For other colors/combinations, contact Factory for availability 

## Connections 

K80L Models: Integral 5-pin M12 male quick-disconnect connector standard. Terminal-wired models available for use with bulk cable; compression fitting optional. Contact Factory for cable information. 

Other Models: Integral 5-pin M12 male quick-disconnect connector (Q); 150 mm (6 in) PVC-jacketed cable with a 5-pin M12 male quick-disconnect connector (QP), (do not use center pin 5); or 2 m (6.5 ft) unterminated 5-wire PVC-jacketed cable 

Operating Conditions 

Temperature: –40 °C to +50 °C (–40 °F to +122 °F) 

Input Response Time Indicator ON: 250 ms (max.) Indicator OFF: 10 ms (max.) 

## Indicator Flash Rate 

Single Color: 1 second flash rate (500 ms ON) Three Color: 1.5 second rotation rate (500 ms per color) 

Certifcations 

All models: Banner Engineering Europe Park Lane, Culliganlaan 2F bus 3, 1831 Diegem, BELGIUM K50L, K50FL, and T30 models only: Turck Banner LTD Blenheim House, Blenheim Court, Wickford, Essex SS11 8YT, Great Britain K50L models only: 

Environmental Rating 

Rated IP67. K80L has encapsulated electronics only; other models fully encapsulated. K50L, and K50FL quick-disconnect models meet IP69K per DIN 40050-9 Cabled models also meet IP69K if the cable and cable entrance are protected from high-pressure spray. 

Required Overcurrent Protection 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. 

Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. 

Supply wiring leads < 24 AWG shall not be spliced. 

For additional product support, go to www.bannerengineering.com. 

|Supply Wiring (AWG)|Required Overcurrent Protection (Amps)|
|---|---|
|20|5.0|
|22|3.0|
|24|2.0|
|26|1.0|
|28|0.8|
|30|0.5|



P/N 121902 Rev. L 

www.bannerengineering.com - Tel: + 1 888 373 6767 

2 

EZ-LIGHT Indicators for 3-Color, 7-Function 

## Dimensions 

**==> picture [500 x 157] intentionally omitted <==**

**----- Start of picture text -----**<br>
M18 Models T30 Models K50L Models<br>50.0 mm<br>(1.97")<br>Ø 40.0 mm<br>(1.57")<br>Ø16.5 mm<br>(0.65") M30 x 1.5 63.7 mm(2.51") (mounting nut M30 x 1.5  38 mm (1.50")*<br>Thread included)<br>Max. Torque 4.5 Nm<br>(40 in-lbf) 20 mm (0.79")<br>61 mm<br>(2.4")  Internal Threads ½ - 14 NPSM  11 mm (0.43")<br>45.0 mm Max. Torque 2.25 Nm<br>30 mm  M12 X 1 (1.77") (20 in-lbf)<br>(1.2")<br>Ø 15 mm<br>(0.59")<br>M18 X 1 23 mm<br>M12 X 1 (0.9")<br>**----- End of picture text -----**<br>


**==> picture [500 x 157] intentionally omitted <==**

**----- Start of picture text -----**<br>
K50FL Models K80L Models<br>44.6 [1.76"]<br>80.8 mm<br>Ø50 [1.97"] (3.18")<br>65.0 mm(2.56") 66.3 mm(2.61") 109.5 m(4.31<br>60.0<br>[2.36"]<br>35.0<br>[1.38"]<br>65.0 mm<br>(2.56")<br>2x 5.0 [0.20"]<br>16.0 [0.63"] 2x 5.5 [0.21"]<br>17.0 [0.67"]<br>2x 5.0 [0.20"] Internal Threads ½ - 14 NPSM<br>4X Ø 5.5 mm (Ø 0.22")  Max. Torque 2.25 Nm (20 in–lbf)<br>40.0 [1.58"] Max. Torque 1.12 Nm (10 in–lbf) with supplied screws 26.0 mm<br>(1.02")<br>4X 8–32 UNC  M12 X 1<br>Max. Torque 1.12 Nm (10 in–lbf)<br>**----- End of picture text -----**<br>


## Accessories 

## Cordsets 

|4-Pin Threaded M12 Cordsets—Single Ended|4-Pin Threaded M12 Cordsets—Single Ended|4-Pin Threaded M12 Cordsets—Single Ended|4-Pin Threaded M12 Cordsets—Single Ended|4-Pin Threaded M12 Cordsets—Single Ended|4-Pin Threaded M12 Cordsets—Single Ended|||||
|---|---|---|---|---|---|---|---|---|---|
|Model|Length|Style|Dimensions|||||Pinout (Female)||
|MQDC-406|2 m (6.56 ft)|Straight|**44 Typ.**<br>**M12**|||**ø 14.5**<br>**x 1**|**4**<br>**1**|**2**<br>**3**<br>**5**|1 = Brown<br>2 = White<br>3 = Blue<br>4 = Black<br>5 = Unused|
|MQDC-415|5 m (16.4 ft)|||||||||
|MQDC-430|9 m (29.5 ft)|||||||||
|MQDC-450|15 m (49.2 ft)|||||||||
|MQDC-406RA|2 m (6.56 ft)|Right-Angle|**32 Typ.**<br>**[1.26"]**<br>**ø 14.5 [0.57"]**<br>**M12 x 1**|||**30 Typ.**<br>**[1.18"]**|**1**<br>**2**|**3**<br>**4**||
|MQDC-415RA<br>MQDC-430RA|5 m (16.4 ft)<br>9 m (29.5 ft)|||||||||
|MQDC-450RA|<br>15 m (49.2 ft)|||||||||
|||||||||||
|||||||||||
|||||||||||
|||||**]**||||||



To order bulk cable for terminal-wired K80L models, contact the factory. If cables other than those listed are used, use a 5-pin mating cable. 

P/N 121902 Rev. L 

www.bannerengineering.com - Tel: + 1 888 373 6767 

3 

EZ-LIGHT Indicators for 3-Color, 7-Function 

## Brackets 

**==> picture [500 x 329] intentionally omitted <==**

**----- Start of picture text -----**<br>
For use with M18 and T18 models or base-<br>SMB18A • Right-angle mounting bracket with a curved slotfor versatile orientation 30 mount T30 models. Other available 18 mm dia.brackets:<br>• 12-ga. stainless steel SMB1815SF<br>•• 18 mm sensor mounting holeClearance for M4 (#8) hardware A B C 41 SMB18Q<br>SMB18SF<br>SMB312PD<br>46 SMBAMS18RA<br>SMBAMS18P<br>Hole center spacing:  A to B = 24.2<br>Hole size:  A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5<br>For use with T30 models or base-mount K50L<br>SMB30A • Right-angle bracket with curved slot for versatileorientation 45 models. Other available 30 mm diameterbrackets are:<br>• Clearance for M6 (¼ in) hardware C SMBAMS30RA<br>•• Mounting hole for 30 mm sensor12-ga. stainless steel 61 SMBAMS30P<br>B SMB30SC<br>A SMB30SC<br>SMB30MM<br>69<br>SMB3018SC<br>Hole center spacing:  A to B=40<br>Hole size:  A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5<br>SMBDX80DIN • Black reinforced thermoplastic 89 with no additional hardwareK50FL models include a 48 mm (1.9 inch)circular velcro mounting kit for easy mounting<br>• Bracket for mounting on a 35 mm DIN rail<br>89<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

© Banner Engineering Corp. All rights reserved