K100PLNRGB7Q

K100 Pro Hazardous Indicator Beacon (DC) 

## Features 

Programmable Multicolor Indicator with Optional Audible Alarm for Indoor or Outdoor Use 

- Industrial beacon providing bright, configurable indication for OEMs and users that need visible status information 

- • Ex/HazLoc approvals for potentially explosive applications • Rugged construction provides years of uninterrupted operation • Unique water-shed beacon design helps protect the indicator • Fourteen colors in one device • Programmable using Banner's Pro Editor software and Pro Converter Cable • 36 mm threaded polycarbonate base • Rugged IP69K per ISO 20653, UL Type 4X housing • PNP or NPN operation depending on wiring • Variety of connector options • Rugged UV-stabilized polycarbonate base and window • 12 V DC to 48 V DC operating voltage • IK08 impact rating for maximum protection demanding applications 

## Pro Editor 

Use Banner's Pro Editor software and Pro Converter Cable to create custom configurations by selecting different colors, flash patterns, and animations. For more information visit www.bannerengineering.com/proeditor. 

## Full Preview Connection (Required) 

The full preview connection must be used for the K100 Pro Hazardous Indicator Beacon. 

E 

A = Pro Converter Cable (MQDC-506-USB) B = Splitter (CSB-M1251FM1251M) C = PC running Pro Editor software D = Any Banner Pro Series-enabled device (K50 shown) E = Power Supply (PSW-24-1, PSW-24-2, or PSD-24-4) F = 8-Pin to 5-Pin Double-Ended Cordset (MQDC-801-5M-PRO), required for 8-Pin models 

**==> picture [282 x 84] intentionally omitted <==**

**----- Start of picture text -----**<br>
A<br>l<br>N C<br>D<br>B<br>= F<br>**----- End of picture text -----**<br>


Original Instructions 02-Sep-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 225027 Rev. B 

K100 Pro Hazardous Indicator Beacon (DC) 

## Models 

Standard models shown. Contact factory for other options. 

**==> picture [476 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
Family Style Type Classification Voltage Colors Audible Connector *<br>K100 P L N RGB7 A Q<br>P = Pro L = Indicator Blank = DC Blank = None<br>a N = Haz Area (Class I Div 2) RGB7 = RGB Multicolor ee A = Audible Blank = 2 m integral ITC-ER PVC cable<br>Q = 5-pin integral M12 quick disconnect **<br>**----- End of picture text -----**<br>


- Models with a quick disconnect require a mating cordset 

- ** Must be enclosed with a protective conduit or a suitable enclosure 

## Installation Instructions 

## Ex/HazLoc Applications 

WARNING: 

- Explosive Atmospheres/Hazardous Locations 

- • It is the user's responsibility to ensure that all local, state, and national laws, rules, codes, or regulations relating to the installation and use of this device in any particular application are satisfied. This device must be installed by a Qualified Person[(1)] , in accordance with this document and applicable regulations. 

WARNING: 

- Explosion Hazard 

- • Do not disconnect equipment unless the power has been switched off or the area is known to be nonhazardous. 

WARNING: 

- Electrostatic Discharge (ESD) Specific Conditions for Safe Use 

- • Parts of the enclosure are non-conducting and can generate an ignition-capable level of ESD. • To reduce the risk of ignition due to electrostatic discharge, avoid contact with the equipment while an explosive atmosphere is present. 

- • Clean the equipment with only a damp cloth. 

## Specific Conditions for Use and General Notes 

• See Specifications and Wiring Diagrams for important information concerning entity parameters, permissible locations, electrical connections and certifications. 

- In addition to the warning above concerning user responsibility, the installation must comply with the following: 

- All installations must comply with all manufacturer's instructions. 

- ◦ All applicable wiring methods in accordance with the relevant local regulations and the authority having jurisdiction. ◦ U.S. Installations: The relevant requirements of the National Electric Code® (ANSI/NFPA-70 NEC®). ◦ Canadian Installations: The relevant requirements of the Canadian Electrical Code (CSA C22.1). ◦ ATEX / IECEx Installations: The relevant requirements of EN IEC 60079-14 and applicable National regulations. 

- • Do not attempt any repairs to this device; it contains no field-replaceable parts or components. Tampering and/or replacement with non-factory components may adversely affect the safe use of the system. 

- • The nonconducting materials of this device may be susceptible to ignition-capable level of electrostatic charging and precautions must be taken to avoid this. The user/installer shall ensure that the equipment is not installed in a location where it may be subjected to external conditions (such as high-pressure steam) which are conducive to creating a build-up of electrostatic charges. 

- • Clean with a damp cloth only. • If the equipment is likely to come into contact with aggressive substances[(2)] , then it is the responsibility of the user to take suitable precautions[(3)] that prevent it from being adversely affected, thus ensuring that the type of protection is not compromised. 

- • The ingress protection (IP rating) of enclosures/panels may be invalidated by the installation of the beacon. The installation of the beacon in a particular enclosure/panel is subject to the evaluation/acceptance of the authority having jurisdiction. 

- • Models with integral quick-disconnect (QD) connectors: 

(1) A Qualified Person is a person who, by possession of a recognized degree or certificate of professional training, or who, by extensive knowledge, training and 

> experience, has successfully demonstrated the ability to solve problems relating to the subject matter and work. 

> (2) Aggressive substances—for example, acidic liquids or gases that may attack metals, or solvents that may affect polymeric materials. 

(3) Suitable precaution—for example, regular checks as part of routine inspections or establishing from the materials data sheet that is resistant to specific chemicals. 

page 2 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

02-Sep-25 

K100 Pro Hazardous Indicator Beacon (DC) 

   - Use recommended Banner cordsets (see "Cordsets" on page 7), or suitable quick-disconnect cordsets with threaded retaining nut (see "Specifications" on page 4). The cordset must be securely fastened using the quick-disconnect retaining nut to prevent disconnection. Maximum connector torque: 6 inch-lbf. 

   - Must be installed such that the connector is protected from impact and unauthorized disconnection. The method of protection can include conduit (e.g. pole, pendent), enclosed raceway, a listed enclosure suitable for the intended use, and/ or by inaccessible location that excludes possible impact damage. 

- The device must be powered by a Class 2 or SELV power supply. 

- • ATEX / IECEx Installations; additional specific conditions of use 

   - The Beacon shall only be installed in areas with low risk of mechanical impact. 

   - Transient protection shall be provided at a level not exceeding 140% of the peak rated voltage at the supply terminals of the Beacon. 

   - For Zone 2: When the equipment is mounted to an external enclosure, the external enclosure shall be rated ATEX/IECEx Zone 2 IP54 minimum, in accordance with IEC/EN 60079-0. To maintain the IP64 rating for the overall assembly of beacon and external enclosure, the external enclosure and any fittings used must be rated IP64 minimum. 

   - For Zone 22: When the equipment is mounted to an external enclosure, the external enclosure shall be rated ATEX/IECEx Zone 22 IP64 minimum, in accordance with IEC/EN 60079-0 and IEC/EN 60079-31. 

- U.S. / Canadian Zone Installations; additional specific conditions of use 

   - Only non-audible K100 Pro Beacon models with 2 m integral cable. 

   - ◦ The Beacon shall only be installed in areas with low risk of mechanical impact. 

   - Transient protection shall be provided at a level not exceeding 140% of the peak rated voltage at the supply terminals of the Beacon. 

   - The beacons must be mounted to a conduit/standoff pipe or on an external enclosure. The K100 beacons must be installed on the conduit/standoff pipe or external enclosure in a way that ensures all field wiring is fully contained within the conduit/ standoff pipe or external enclosure. 

      - For Zone 2: When the beacon is mounted to an external enclosure, the external enclosure shall be rated Zone 2 IP54 minimum, in accordance with UL/CSA 60079-0. To maintain the IP64 rating for the overall assembly of beacon and external enclosure, the external enclosure and any fittings used must be rated IP64 minimum. 

      - For Zone 22: When the beacon is mounted to an external enclosure, the external enclosure shall be rated Zone 22 IP64 minimum, in accordance with UL/CSA 60079-0 and UL/CSA 60079-31. 

## Wiring 

**==> picture [500 x 163] intentionally omitted <==**

**----- Start of picture text -----**<br>
PNP Input NPN Input Key<br>bu (3) bu (3)<br>bk (4) 12–48 V DC bk (4) 12-48 V DC<br>1 1<br>2 bn (1) 2 bn (1) 1 = Brown2 = White3 = Blue<br>4 = Black<br>wh (2) wh (2) 5 = Gray<br>3 3<br>gy (5) gy (5)<br>A A<br>**----- End of picture text -----**<br>


An "X" denotes an active input. 

For example: When the black wire and the white wire are both active, the indicator will be Magenta Steady. 

## Default Configuration 

**==> picture [500 x 150] intentionally omitted <==**

**----- Start of picture text -----**<br>
Wiring Operating Mode/Function<br>Black Brown White Gray Non-Audible Audible<br>X Red Steady Red Steady<br>X Green Steady Green Steady<br>X Blue Steady Blue Steady<br>X X Yellow Steady Yellow Steady<br>X X Magenta Steady Magenta Steady<br>X X Cyan Steady Cyan Steady<br>X X X White Steady White Steady<br>X Off Audible Steady, Frequency 2.5 KHz, Volume High<br>Continued on page 4<br>**----- End of picture text -----**<br>


02-Sep-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 3 of 8 

K100 Pro Hazardous Indicator Beacon (DC) 

**==> picture [500 x 135] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 3<br>Wiring Operating Mode/Function<br>Black Brown White Gray Non-Audible Audible<br>X X Red Steady Red Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X Green Steady Green Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X Blue Steady Blue Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X X Yellow Steady Yellow Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X X Magenta Steady Magenta Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X X Cyan Steady Cyan Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>X X X X White Steady White Steady, Audible Steady, Frequency 2.5 KHz, Volume High<br>**----- End of picture text -----**<br>


## Specifications 

## Supply Protection Circuitry 

Protected against reverse polarity and transient voltages 

Leakage Current Immunity 400 µA 

Indicator Response Time On response: 325 ms (max) Off response: 20 ms (max) 

Connections 

Integral 5-pin M12 male quick-disconnect connector or 2 m (6.5 ft) integral ITC-ER PVC-jacketed cable, depending on model 

Models with a quick disconnect require a mating cordset Connecting 5-pin M12 quick-disconnect cordsets (see "Cordsets" on page 7): Female single-ended Multiconductor cable (at minimum): UL Style 2517, 24 AWG wire, rated ≥ 80 °C; M12 quick-disconnect connector: per IEC 61076-2-101, must have threaded M12 x 1 retaining nut 

## Construction 

Base, Dome, and Nut: Polycarbonate 

## Operating Conditions 

–40 °C to +60 °C (–40 °F to +140 °F) 

90% at +50 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) 

## Vibration and Mechanical Shock 

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave) 

Impact: IK08 (IEC 60068-2-75) 

## Environmental Rating 

IP66, IP69K per ISO 20653, UL Type 4X 

## Approvals 

NEC and CEC (cULus) 

- Gas and Vapors: Class I Div 2 Groups ABCD T4 

- • Dust and Fibers/flyings: Class II Div 2 Groups FG T6; Class III Div 1 and Div 2 T6 

Certifications 

## Mounting 

M36 by 2.0 threaded base, maximum torque 5.0 N·m (44 inch-lbf) 

Interior 3/4-14 NPT Thread 

Mounting nut included 

Adjacent Unit Mounting Separation Distance Minimum: 0 in (mounted with unit flanges touching) 

Audible Characteristics 

Sound Intensity at 2.5 KHz, at 1 m (typical): 

Low volume setting: 93 dB Medium volume setting: 96 dB High volume setting: 101 dB 

Maximum Input Power Light Only: 5.3 W Light and Audible: 7.0 W 

## LED Lifetime 

Lumen maintenance L70 

When operating within specifications, output decreases less than 30% after 42,000 hours 

E530817 

## Pro Editor Configuration 

Connection to Pro Editor software enables control of: 

- Animation: Steady, Flash, Two Color Flash, Intensity Sweep, Two Color Sweep, Wave, Double Wave 

- Color: Green, Red, Yellow, Blue, White, Cyan, Magenta, Amber, Rose, Lime Green, Orange, Sky Blue, Violet, Spring Green 

- • Intensity: Off, Low, Medium, High, Custom • Speed: Slow, Standard, Fast, Custom 

- Pattern: Normal, Strobe, 3-Pulse, SOS, Random 

- Direction: Clockwise (CW), Counter-Clockwise (CCW) 

- Audio Feedback: Off, On, Pattern, Advanced Audible 

- • Audible Tones: Pulse, Wobble, Strobe, Whoop, Staccato, Siren, Continuous 1, Continuous 2, Jingle, Melody 1, Melody 2, Melody 3 

- • Audible Intensity: Low, Medium, High • One pin configurable as either an input or an output 

Pro Converter Cable required to interface between PC and indicator, see accessories 

Supply Voltage and Current 12 V DC to 48 V DC 

Product approved with usage of Class 1 or Class 3 Power Supply to achieve Class 2 Power Supply status Use only with a suitable Class 2 Power Supply (North America) Maximum current (mA): 

**==> picture [222 x 71] intentionally omitted <==**

**----- Start of picture text -----**<br>
Voltage Light Only Light & Audible<br>12 395 535<br>18 265 350<br>24 200 260<br>Continued on page 5<br>**----- End of picture text -----**<br>


page 4 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

02-Sep-25 

K100 Pro Hazardous Indicator Beacon (DC) 

|||Continued from page 4|Continued from page 4|Continued from page 4|
|---|---|---|---|---|
|30|Voltage|160|Light Only|Light & Audible<br>210|
|36||140||180|
|42||125||160|
|48||110||145|



## Indicator Characteristics 

||Color<br>Coordinates(4)|Color<br>Coordinates(4)|
|---|---|---|
||x|y|
|620 nm|0.6900|0.3081|
|525 nm|0.1620|0.7112|
|468 nm|0.1400|0.0539|
|575 nm|0.4780|0.4700|
|-|0.3877|0.1817|
|492 nm|0.1666|0.3406|
|6000K|0.3379|0.3380|
|590 nm|0.5566|0.4098|
|-|0.5234|0.2310|
|562 nm|0.3987|0.5306|
|600 nm|0.6135|0.3665|
|485 nm|0.1483|0.2476|
|-|0.2148|0.0938|
||0.1780|0.5375|



Internal temperature compensation circuitry: Reduces the Lumen Output to decrease the unit's internal operating temperature. The amount of reduction is dependent on the ambient operating temperature, supply voltage, color, and/or audible functions being utilized. 

(4) Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. 

## Required Overcurrent Protection 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. 

Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. 

For additional product support, go to www.bannerengineering.com. 

**==> picture [208 x 67] intentionally omitted <==**

**----- Start of picture text -----**<br>
Supply  Supply<br>Required Overcurrent  Required Overcurrent<br>Wiring  Wiring<br>Protection (A) Protection (A)<br>(AWG) (AWG)<br>20 5.0 26 1.0<br>22 3.0 28 0.8<br>24 2.0 30 0.5<br>**----- End of picture text -----**<br>


02-Sep-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 5 of 8 

K100 Pro Hazardous Indicator Beacon (DC) 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [500 x 281] intentionally omitted <==**

**----- Start of picture text -----**<br>
Standard Models Audible Models<br>Ø 92.8 Ø 92.8<br>[3.65] [3.65]<br>80.9 81.0<br>[3.18] [3.19]<br>134.7 134.8<br>[5.3] [5.31]<br>25.5<br>25.5 M36 x 2.0 [1.01]<br>M36 x 2.0 [1.01]<br>Interior<br>Interior 3/4 - 14 NPT<br>3/4 - 14 NPT<br>13.0 M12 x 1.0 13.0<br>M12 x 1.0 [0.51] [0.51]<br>Ø 118.5<br>Ø 118.5 [4.67]<br>[4.67]<br>**----- End of picture text -----**<br>


## Accessories 

## Pro Editor Hardware 

**==> picture [500 x 262] intentionally omitted <==**

**----- Start of picture text -----**<br>
MQDC-506-USB<br>• Pro Converter Cable<br>• 1.83 m (6 ft) length 5-pin M12 quick disconnect to Device and USB to PC<br>• Required for connection to the configuration software<br>CSB-M1251FM1251M<br>• 5-pin parallel Y splitter (Male-Male-Female)<br>• For full Pro Editor preview capability<br>• Requires external power supply, sold separately<br>PSW-24-1<br>• 24 V DC, 1 A power supply<br>• 2 m (6.5 ft) PVC cable with M12 quick disconnect<br>• Provides external power with splitter cable, sold separately<br>ACC-PRO-CABLE5<br>• Mating accessory for cabled and terminal models<br>• 150 mm (6 inch) PVC cable with M12 quick disconnect<br>• Lever wire nuts included (qty 5)<br>• Required to connect cabled models and screw terminal models to Pro Converter Cable, sold<br>separately  x5<br>**----- End of picture text -----**<br>


page 6 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

02-Sep-25 

K100 Pro Hazardous Indicator Beacon (DC) 

## Cordsets 

**==> picture [500 x 237] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC1-501.5 0.5 m (1.5 ft)<br>MQDC1-503 0.9 m (2.9 ft)  44 Typ.<br>MQDC1-506 2 m (6.5 ft)<br>MQDC1-515 5 m (16.4 ft)  Straight<br>MQDC1-530 9 m (29.5 ft)  M12 x 1 2<br>ø 14.5 1<br>MQDC1-560 18 m (59 ft)<br>3<br>MQDC1-5100 31 m (101.7 ft)  4 5<br>MQDC1-506RA 2 m (6.5 ft)  1 = Brown<br>32 Typ. 2 = White<br>MQDC1-515RA 5 m (16.4 ft)  [1.26"] 3 = Blue 4 = Black<br>MQDC1-530RA 9 m (29.5 ft)  5 = Gray<br>30 Typ.<br>Right-Angle  [1.18"]<br>MQDC1-560RA 19 m (62.3 ft)<br>M12 x 1<br>ø 14.5 [0.57"]<br>**----- End of picture text -----**<br>


## Brackets 

## LMB36RA 

- Indicator light right-angle mounting 

- • 36 mm mounting hole • Stainless steel 

**==> picture [87 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
65 70<br>50.8<br>4 X Ø6.5 25.4<br>Ø36.5<br>62.5<br>**----- End of picture text -----**<br>


## Elevated Mount System 

Elevated Mount System (1/2" Pipes) 

**==> picture [500 x 209] intentionally omitted <==**

**----- Start of picture text -----**<br>
Adapter/Cover Model Description<br>• Adapter from M36 thread to ½-14 NPSM thread<br>SA-M36E12 •• Streamlined black plastic mounting base adapter/coverDrilled hole<br>Black Anodized Aluminum, ½ in. NPT Pipe  Clear Anodized Aluminum, ½ in. NPT Pipe<br>Models Models Description<br>Pipe<br>SOP-E12-150A , 150 mm (6 in) long SOP-E12-150AC , 150 mm (6 in) long<br>• Elevated-use stand-off pipe<br>SOP-E12-300A , 300 mm (12 in) long SOP-E12-300AC , 300 mm (12 in) long • Threaded at both ends<br>• Compatible with most industrial<br>SOP-E12-600A , 600 mm (24 in) long - environments<br>SOP-E12-900A , 900 mm (36 in) long SOP-E12-900AC , 900 mm (36 in) long<br>Mounting Base Model Description<br>• Elevated-use stand-off pipes (½ in, NPSM/DN15)<br>SA-F12 •• M5 mounting hardware and nitrile gasket includedDie-cast zinc base with black paint<br>**----- End of picture text -----**<br>


02-Sep-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 7 of 8 

K100 Pro Hazardous Indicator Beacon (DC) 

## Elevated Mount System (3/4" Pipes) 

**==> picture [500 x 154] intentionally omitted <==**

**----- Start of picture text -----**<br>
Adapter/Cover Model Description<br>Adapter/<br>Cover • M36 thread adapter with clearance for ¾ pipe mount<br>SA-M36SOP •• Streamlined black plastic mounting base adapter/coverDrilled hole<br>Black Anodized Aluminum, ¾ in. NPT Pipe Models Description<br>Pipe<br>SOP-E34-150A , 150 mm (6 in) long<br>SOP-E34-300A , 300 mm (12 in) long •• Elevated-use stand-off pipeThreaded at both ends<br>SOP-E34-600A , 600 mm (24 in) long • Compatible with most industrial environments<br>SOP-E34-900A , 900 mm (36 in) long<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 8 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

02-Sep-25