HVPB114

## Product Data Sheet 

## POWER DISTRIBUTION BLOCK 

## HVPB114 

Add suffix  “CH” for snap-on hinged cover (HVPB114 CH) 

## Wire Range 

- Line and Load: (1) 1/2’ Studs 

   - Suitable for listed lugs or flexible bus bar 

   - Lugs must fit on 1/2’ studs, 1.55’ (39.8 mm) max width 

## Electrical Ratings: 

- 750 amps with prepared wire 

- 595 amps with flexible bus bar 

- Voltage: 

   - 1500V per UL 1059 class E & CSA 22.2 No.158, class C requirements 

   - 600V per UL 1059 service & industrial class (B, C) requirements 

   - 600V per CSA 22.2 no.158 service & industrial class C requirements 

- Short circuit current rating (SCCR) - see table below 

- Factory & field wiring 

## Agency Compliance 

- UR - UL recognized terminal block, evaluated to UL 1059, file no. XCFR2.E62806 

- cUR - UL evaluated to CSA 22.2 no.158, file no. XCFR8.E62806 

## Material Information 

- Insulator base: 

   - Thermoplastic 

   - Flammability rating of insulator base UL94V0 

   - Temperature rating: -40°C to 110°C (UL RTI) 

- Connector - aluminum, tin plated 

- Terminal screws - steel, nickel plated 

- Terminal studs -  steel, zinc plated 

- Hardware -  nuts, flat washer, split washer - steel, zinc plated 

- RoHS Compliant 

www.marathonsp.com 

1 

## Product Data Sheet 

## Termination Specifications 

|Line/Load Side|Te r m i n at i o n<br>Type|Torque|Stud Length|Maximum<br>Lug/Bar<br>Width|
|---|---|---|---|---|
|~~A~~|Listed lugs or flex-<br>ible bus bar on 3/8’<br>studs<br>||56.4 N·m/<br>500 lbf·in<br>**|**|37.1mm / 1.46”|39.8mm / 1.55”|



• For use with conductors prepared with Listed connectors such as single hole compression/crimp lugs or 

listed ring, fork or spade terminals. 

- Conductor size, ampacity, temperature rating and type are dictated by the ratings of the listed lugs utilized and applicable code requirements. 

## Short Circuit Current Ratings (SCCR) 

|Suitable Prepared Conductor*<br>kcmil/AWG or Suitable Flexibar|Suitable Prepared Conductor*<br>kcmil/AWG or Suitable Flexibar|Overcurrent Protec-<br>tion Device|SCCR, RMS|Volts, Max|
|---|---|---|---|---|
|Line|Load||||
|500 - 2/0|500 - 2/0|no OCPD|25kA|480|
|*10 x 32 x 1<br>to<br>*4 x 32 x 1|*10 x 32x 1<br>to<br>*4 x 32 x 1|no OCPD|25kA|480|
|Other conductors or  bus bar on 3/8’ studs||no OCPD|10kA|600|



## *kcmil/AWG Conductors Prepared with Listed Terminals 

www.marathonsp.com 

PDS 0482 REV-C  11/13/17 

2 

## Product Data Sheet 

## Installation & Accessories 

- Mounting (Panel): 

   - For use with #10 fastener with flat washer (max diameter 9/16”). 

   - Recommended mounting torque 25-30 lbf·in (2.8 - 3.4 N·m). 

## • Safety Guidelines: 

   - Use provided hardware (flat washer, Belleville & nuts). 

   - Accessory cover (optional) is not intended to provide insulation for electrical spacings. 

   - Stack lugs in decreasing width order.  Ensure contact is maintained throughout the  connection. 

- Covers: 

   - Snap-on covers available upon request 

   - Catalog Number: CH13321 

   - Covers are black polycarbonate 

## Drawing 

www.marathonsp.com 

PDS 0482 REV-C  11/13/17 

3