HS053-HD60125

s e “383°ee e e °3*°ee Sensata 

Technologies 

## |[HS053][ASSEMBLIES] 

SSR & HEAT SINK ASSEMBLIES 

## Features 

- ¢ 82.5 amp AC output @ 40°C 

- ¢ Single Channel or 3 Phase output 

- ¢ 3 to 32 VDC input control voltage 

- ¢ Panel mounted 

- ¢ UL, CSA, VDE, CE approved SSRs 

- ¢ Epoxy free design 

## @ provuct SELECTION 

## @ output sPEcIFICATIONS " 

- |Maximum Off-State Leakage Current @RatedVoltage(mArms) | 

[Minimum Load Current(Arms) 

- |Maximum On-State Voltage Drop@RatedCurrent(Vac) |S [Minimum Power Factor(withMaximumLoad) |B 

## @ input SPECIFICATIONS " 

[MinimummA inputCurrent MA | **M** aximumInputCurrent mA Page1 

Copyright © 2018 Sensata Technologies, Inc 

crydom 

| www.sensata.com 

## @ GENERAL SPECIFICATIONS 

**==> picture [195 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
[Minimum Insulation Resistance (@500VDC) |<br>**----- End of picture text -----**<br>


**==> picture [120 x 75] intentionally omitted <==**

**----- Start of picture text -----**<br>
80m<br>‘Screws dry without grease<br>**----- End of picture text -----**<br>


[StatusIndicatorDisplayPN 

## @ MECHANICAL SPECIFICATIONS 

Tolerances: +0.02 in / 0.5mm All dimensions are in: inches [millimeters] 

**==> picture [291 x 210] intentionally omitted <==**

**----- Start of picture text -----**<br>
6.00<br>-/— 4.90— 5.50<br>es) | Fae<br>—| 1.70<br>4.42<br>3.50<br>**----- End of picture text -----**<br>


## 33) THERMAL DERATE INFORMATION 

**==> picture [246 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
HS053 w/125A SSR or 1-50A 3-Phase SSR<br>— 100<br>&<br>4 80<br>— 60<br>=<br>6 40<br>aj<br>s 20<br>0<br>0 10 20 30 40 50 60 70 80<br>Ambient Temperature (°C)<br>**----- End of picture text -----**<br>


**==> picture [128 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
@ GENERAL NOTES<br>**----- End of picture text -----**<br>


(1) All parameters at 25°C unless otherwise specified. 

(2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 

Page 2 

es www.sensata.com 

Copyright © 2018 Sensata Technologies, Inc 

crydom 

**==> picture [406 x 274] intentionally omitted <==**

**----- Start of picture text -----**<br>
8 AGENCY APPROVALS AND CERTIFICATIONS<br>Designed in accordance with the requirements of IEC 62314<br>Agency approvals are for relay only.<br>A \\C) US £116949 @: LR81689 LAS 10143 UG (Not Applicable: -B and 4D) C € Vhous<br>@ warnincs<br>_—— = RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE<br>¢. DAN GER <») Thebefore touching product's side panels may be hot, allow the product to cool<br>Follow proper mounting instructions including torque values<br>© Do not allow liquids or foreign objects to enter this product<br>Failure to follow these instructions can result in serious<br>injury, or equipment damage.<br>© Disconnect all power before installing or working with this<br>A. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARCH FLASH<br>Danger equipmentVerify all connections and replace all covers before turning on<br>Electric shock power<br>Hiek Failure to follow these instructions will result in death or<br>serious injury<br>**----- End of picture text -----**<br>


Page 3 

eS Sensata Technologies, Inc. ("“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that CONTACT US incorporate Sensata products (also referred to herein as “components”. Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer's systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that +1 (877) 502 5500 — Option 2 specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, sales.crydom@sensata.com improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO +44 (1202) 416170 OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND ssr-info.eu@sensata.com: a NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE sales isasia@list sensata.com OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ~ es oo oo 7306 1500 ° ANYWARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET J nas i i 9 ] ] 7 ) 11 j ) 11 j 11 j j ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD apan i } ( 9) 277 7 **1** TO SENSATA DATA SHEETS OR USE THEREOF. Korea +82 (31) 601 2004 All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY India +91 (80) GF 3208 30 _ GF 3208 30 _ 3208 30 _08 30 _ 30 _ _ FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY Rest of Asia Asia +886 (2) RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, ext 2808 AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. 

: a sales isasia@list sensata.com ~ es oo oo 7306 1500 ° J nas i i 9 ] ] 7 ) 11 j ) 11 j 11 j j apan i } ( 9) 277 7 **1** Korea +82 (31) 601 2004 India +91 (80) GF 3208 30 _ GF 3208 30 _ 3208 30 _08 30 _ 30 _ _ Rest of Asia Asia +886 (2) 27602006 ext 2808 www-.sensata.com 

Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. 

Copyright © 2018 Sensata Technologies, Inc