EGXF800ELL911ML35S

Vibration resistant structure snap-ins, 105℃ 

**LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS** 

## **KVASeries** 

- ・Designed for automotive application (including On Board Charger) by high vibration resistance structure. 

- ・Endurance with ripple current : 2,000 hours at 105℃ 

- ・Rated voltage range : 450Vdc, Capacitance range : 160 to 970µF 

- ・Non solvent resistant type 

- ・RoHS2 Compliant 

- ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. 

## ◆ **SPECIFICATIONS** 

|**Items**<br>~~ee~~<br>~~ee~~|**Characteristics**<br>|**Characteristics**<br>|**Characteristics**<br>|
|---|---|---|---|
|**Category**<br>**Temperature Range**<br>~~ee~~<br>~~eeOO~~|-40 to +105℃<br>~~OO~~|||
|**Rated Voltage Range **<br>~~eeOO~~|450Vdc<br>~~OO~~|||
|**Capacitance Tolerance**<br>~~OO~~<br>~~ee~~|±20%(M)<br>(at 20℃,120Hz)<br>~~OO~~|||
|**Leakage Current**<br>~~OO~~<br>~~ee~~<br>~~BE~~|I≦3  CV<br>Where,I : Max. leakage current(µA),C : Nominal capacitance(µF),V : Rated voltage(V)<br>(at 20℃after 5 minutes)<br>~~OO~~<br>~~BE~~<br>~~——i‘“‘“ RR~~|||
|**Dissipation Factor**<br>**(tan**δ**)**<br>~~ee~~<br>~~BE~~|Rated voltage(Vdc)<br>~~BE~~|450V|(at 20℃,120Hz)<br>~~——i‘“‘“ RR~~|
||tanδ(Max.)<br>~~BE~~|0.20||
|**Low Temperature**<br>**Characteristics**<br>**(Max. Impedance Ratio)**<br>~~BE~~<br>~~oeeeeeeseses—“‘“i‘“(i<i<‘<‘éicY~~|Rated voltage(Vdc)<br>~~BE~~<br>~~oeeeeeeseses—“‘“i‘“(i<i<‘<‘éicY~~|450V<br>~~oeeeeeeseses—“‘“i‘“(i<i<‘<‘éicY~~||
||Z(-25℃)/Z(+20℃)<br>~~oeeeeeeseses—“‘“i‘“(i<i<‘<‘éicY~~|8<br>~~oeeeeeeseses—“‘“i‘“(i<i<‘<‘éicY~~||
|**Endurance**<br>~~oeeeeeeseses—“‘“i‘“(i<i<‘<‘éicY~~<br>~~SS~~|The following specifications shall be satisfied when the capacitors are restored to 20℃after subjected to DC voltage with the rated<br>ripple current is applied(thepeak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃.<br>Capacitance change<br>≦±20% of the initial value<br>D.F.(tanδ)<br>≦200% of the initial specified value<br>Leakage current<br>≦The initial specified value<br>~~oeeeeeeseses—“‘“i‘“(i<i<‘<‘éicY~~<br>~~SSS~~<br>~~a~~|||
||Capacitance change<br>~~SS~~|≦±20% of the initial value<br>~~SS~~||
||D.F.(tanδ)<br>~~SS~~<br>~~a~~|≦200% of the initial specified value<br>~~SS~~<br>~~a~~||
||Leakage current<br>~~SS~~<br>~~a~~|≦The initial specified value<br>~~SS~~<br>~~a~~||
|**Shelf Life**<br>~~SS~~<br>~~See~~|The following specifications shall be satisfied when the capacitors are restored to 20℃after exposing them for 1,000 hours at 105℃without<br>voltage applied. Before the measurement,the capacitor shall bepreconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.<br>Capacitance change<br>≦±15% of the initial value<br>D.F.(tanδ)<br>≦150% of the initial specified value<br>Leakage current<br>≦The initial specified value<br>~~SSS~~<br>~~a~~<br>~~See~~<br>~~[$+~~|||
||Capacitance change<br>~~See~~|≦±15% of the initial value<br>~~See~~||
||D.F.(tanδ)<br>~~See~~<br>~~[$+~~|≦150% of the initial specified value<br>~~See~~<br>~~[$+~~||
||Leakage current<br>~~See~~<br>~~[$+~~|≦The initial specified value<br>~~See~~<br>~~[$+~~||
|Vibration<br>~~Po~~<br>-|The following specifications shall be satisfied when the capacitors are restored to 20℃after subjected to vibration test (vibration profile<br>shown below)at room temperature(15 to 35℃).<br>Capacitance change<br>≦±5％of the initial value<br>D.F.(tanδ)<br>≦The initial specified value<br>Leakage current<br>≦The initial specified value<br>Vibrationprofile<br>Vibration frequency<br>range<br>10 to 2,000Hz<br>Acceleration<br>49m/s<br>2(5G)<br>Sweeprate<br>10 to 2,000 to 10Hz   20 minutes<br>Direction and<br>period of motion<br>4 hours in each of 3 mutually perpendicular directions (total of 12 hours)<br>Fixation<br>Securelyattach the main bodyusinga fixingtool. Please contact us for details.<br>~~Po~~<br>~~—sSS~~<br>~~————~~<br>~~|~~<br>~~a~~<br>~~aeee~~<br>~~es~~|||
||Vibration frequency<br>range<br>~~————~~|10 to 2,000Hz<br>~~————~~||
||Acceleration<br>~~————~~<br>~~a~~|49m/s<br>2(5G)<br>~~————~~<br>~~a~~||
||Sweeprate<br>~~————~~<br>~~a~~<br>~~ae~~|10 to 2,000 to 10Hz   20 minutes<br>~~————~~<br>~~a~~<br>~~ee~~||
||Direction and<br>period of motion<br>~~————~~<br>~~ae~~<br>~~es~~|4 hours in each of 3 mutually perpendicular directions (total of 12 hours)<br>~~————~~<br>~~ee~~||
||Fixation<br>~~————~~<br>~~ae~~<br>~~es~~|Securelyattach the main bodyusinga fixingtool. Please contact us for details.<br>~~————~~<br>~~ee~~||



## ◆ **DIMENSIONS [mm]** 

## ◆ **PART NUMBERING SYSTEM** 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 **E K V A** CLL] **V S N** LTT] **M** CLL] **S** Supplement code Size code Capacitance tolerance code Capacitance code (ex. 160µF:161, 970µF:971) (L—EE= Dummy terminal code Terminal code (VS, LI) Voltage code (ex. 450V:451) Series code Category 

Please refer to "Product code guide (snap-in type)" 

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y 2024 

Vibration resistant structure snap-ins, 105℃ 

**LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS** 

## **KVASeries** 

## ◆ **STANDARD RATINGS** 

**==> picture [501 x 160] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated ripple Rated ripple<br>WV Cap Case size current Part No. WV Cap Case size current Part No.<br>(Vdc) (µF) φ D × L(mm) [tan] [δ] (Arms/ (Vdc) (µF) φ D × L(mm) [tan] [δ] (Arms/<br>105 ℃ , 120Hz) 105 ℃ , 120Hz)<br>160 25.4 ×25 0.20 0.96 EKVA451VSN161MQ25S 450 25.4×55 0.20 1.87 EKVA451VSN451MQ55S<br>210 25.4 ×30 0.20 1.13 EKVA451VSN211MQ30S 480 35×35 0.20 1.71 EKVA451VSN481MA35S<br>230 30 ×25 0.20 1.18 EKVA451VSN231MR25S 490 25.4×60 0.20 2.00 EKVA451VSN491MQ60S<br>250 25.4 ×35 0.20 1.29 EKVA451VSN251MQ35S 510 30×45 0.20 1.91 EKVA451VSN511MR45S<br>290 35 ×25 0.20 1.29 EKVA451VSN291MA25S 580 30×50 0.20 2.08 EKVA451VSN581MR50S<br>300 25.4 ×40 0.20 1.44 EKVA451VSN301MQ40S 580 35×40 0.20 1.95 EKVA451VSN581MA40S<br>450 450<br>300 30 ×30 0.20 1.36 EKVA451VSN301MR30S 650 30×55 0.20 2.24 EKVA451VSN651MR55S<br>350 25.4 ×45 0.20 1.58 EKVA451VSN351MQ45S 680 35×45 0.20 2.16 EKVA451VSN681MA45S<br>370 30 ×35 0.20 1.55 EKVA451VSN371MR35S 730 30×60 0.20 2.42 EKVA451VSN731MR60S<br>390 35 ×30 0.20 1.52 EKVA451VSN391MA30S 780 35×50 0.20 2.36 EKVA451VSN781MA50S<br>400 25.4 ×50 0.20 1.72 EKVA451VSN401MQ50S 880 35×55 0.20 2.56 EKVA451VSN881MA55S<br>440 30 ×40 0.20 1.73 EKVA451VSN441MR40S 970 35×60 0.20 2.73 EKVA451VSN971MA60S<br>**----- End of picture text -----**<br>


## ◆ **RATED RIPPLE CURRENT MULTIPLIERS** 

## ・Frequency Multipliers 

**==> picture [235 x 22] intentionally omitted <==**

**----- Start of picture text -----**<br>
Frequency(Hz) 50 120 300 1k 10k 50k<br>450V 0.77 1.00 1.16 1.30 1.41 1.43<br>**----- End of picture text -----**<br>


The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current. For details, refer to Section "5-3 Ripple Current Effect on Lifetime" in the catalog, Technical Note. 

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y 2024 

Product Guide 

## **ALUMINUM ELECTROLYTIC CAPACITORS** 

- Always read "Notes on Use" before using the product in order to enable you to use the product correctly and prevent any faults and accidents from occurring. 

- Request the Product Specification on the product of NIPPON CHEMI-CON CORPORATION to refer to it as well as this brochure prior to the order of the products. Some specific notes on use of the ordered product may be described in the specifications. 

- The products listed in this catalog are designed and manufactured for general electronics equipment use and are not intended for use in applications that can adversely affect human life; where the malfunction of equipment may cause damage to life or property. In addition, our products are not intended to be used in specific applications that may cause a major social impact. Please consult with us in advance of usage of our products in the following listed applications. ① Aerospace equipment ② Power generation equipment such as thermal power, nuclear power etc. ③ Medical equipment ④ Transport equipment (automobiles, trains, ships, etc.) ⑤ Transportation control equipment ⑥ Disaster prevention / crime prevention equipment ⑦ Highly publicized information processing equipment ⑧ Submarine equipment ⑨ Other applications that are not considered general-purpose applications. 

- The circuits described as examples in this catalog and the "delivery specifications" are featured in order to show the operations and usage of our products, however, this fact does not guarantee that the circuits are available to function in your equipment systems. We are not in any case responsible for any failures or damage caused by the use of information contained herein. You should examine our products, of which the characteristics are described in the "delivery specifications" and other documents, and determine whether or not our products suit your requirements according to the specifications of your equipment systems. Therefore, you bear final responsibility regarding the use of our products. 

   - Please make sure that you take appropriate safety measures such as use of redundant design and malfunction prevention measures in order to prevent fatal accidents and/or fires in the event any of our products malfunction. 

- We strongly recommend our customers to purchase Nippon Chemi-Con products only through our official sales channels. We assume no responsibility for any defects or damages caused by using products purchased from outside our official sales channel or of counterfeit goods. In addition, we will ask the customer to pay the investigation cost for products purchased outside our official sales channel. 

- We reserve the right to discontinue production and delivery of products. We do not guarantee that all the products included in this catalog will be available in the future. 

   - The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products 

- We continually strive to improve the quality and reliability of our products, but in any case that our product does not meet our published specifications, please stop using it promptly and contact us immediately. As for compensation for non-conforming goods delivered by Chemi-Con, we will limit it only to goods found in non-compliance of our published specifications. This may be accomplished by a no cost replacement of non-conforming individual products, a credit of the piece price paid per each individual non-conforming product, or in other ways deemed necessary. 

   - In addition, we have an established system with enhanced traceability, therefore we will limit the applicable lot items for any potential compensation. 

Part Numbering System Part Numbering System (Appendix) Standardization Available Items by Manufacturing Locations Environmental Measures 

Technical Note 

Precautions and Guidelines 

Recommended Soldering Conditions 

- Taping, Lead preforming and Packaging - Available Terminals for Snap in and Screw Mount Type 

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y 2024