DQ12AB6FF15

## WORLD-BEAM[®] DQ12 Series Sensor 

## Datasheet 

Miniature self-contained photoelectric sensors in universal housing 

- Bright, visible red (645 nm) light source 

- Standard models available with 4-wire, 2 m (6.5 ft) long cable; 150 mm (6 in) PVC cable with a 3-pin M8/Pico-style male quick disconnect; or a 150 mm (6 in) PVC cable with a 4-pin M8/Picostyle male quick disconnect 

- Solid-state, bipolar outputs: one current sourcing (PNP) and one current sinking (NPN) standard on 4-wire models 

- Single output solid-state PNP or NPN standard on Q3 models 

- Light Operate (L.O.) or Dark Operate (D.O.), depending on model 

- Compact 8 mm (0.31 in) housing mounts almost anywhere 

- Crosstalk avoidance circuitry for applications with multiple sensors 

- LED status indicators for Power ON, Signal Received, and Marginal Signal 

- Advanced ASIC technology makes sensor resistant to optical and electrical noise source 

## WARNING: 

- Do not use this device for personnel protection 

- Using this device for personnel protection could result in serious injury or death. 

- This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or deenergized (off) output condition. 

## Models 

|Sensing Mode|Model<br>1|Range|Connection|Output|
|---|---|---|---|---|
|Visible red, 645 nm|DQ126E (emitter)|3 m|2 m (6.5 ft) cable|N/A|
|**OPPOSED**<br>Effective Beam: 5.7 mm (0.22 in)<br>Te(]|DQ12AB6R||2 m (6.5 ft) cable|Bipolar LO|
||DQ12RB6R|||Bipolar DO|
||DQ12AP6RQ3||150 mm (6 in) cable with a 3-pin<br>M8/Pico-style QD|1 PNP LO|
||DQ12RP6RQ3|||1 PNP DO|
||DQ12AN6RQ3|||1 NPN LO|
||DQ12RN6RQ3|||1 NPN DO|
|**P**<br>**POLAR RETRO**<br>Visible red, 645 nm<br>=|DQ12AB6LP|2 m|2 m (6.5 ft) cable|Bipolar LO|
||DQ12RB6LP|||Bipolar DO|
||DQ12AP6LPQ3||150 mm (6 in) cable with a 3-pin<br>M8/Pico-style QD|1 PNP LO|
||DQ12RP6LPQ3|||1 PNP DO|
||DQ12AN6LPQ3|||1 NPN LO|
||DQ12RN6LPQ3|||1 NPN DO|
|**RETRO**<br>Visible red, 645 nm<br>—|DQ12AB6LV|3 m|2 m (6.5 ft) cable|Bipolar LO|
||DQ12RB6LV|||Bipolar DO|
||DQ12AP6LVQ3||150 mm (6 in) cable with a 3-pin<br>M8/Pico-style QD|1 PNP LO|
||DQ12RP6LVQ3|||1 PNP DO|
||DQ12AN6LVQ3|||1 NPN LO|
||DQ12RN6LVQ3|||1 NPN DO|



- 1 • To order the 9 m (30 ft) cable model, add the suffix W/30 to the model number. For example, DQ126E W/30 . 

   - To order the 150 mm (6 in) cable with a 4-pin M8/Pico-style (M8 threaded) QD model, add the suffix Q to the model number. For example, DQ126EQ . 

   - To order the 150 mm (6 in) cable with a 4-pin M12/Euro-style QD model, add the suffix Q5 to the model number. For example DQ126EQ5 . 

- 2 Retroreflective range is specified using one model BRT-60X40C retroreflector. Actual sensing range may be more or less than specified, depending upon efficiency and reflective area of the retroreflector(s) used. 

Original Document 213155 Rev. A 

29 August 2019 

213155 

WORLD-BEAM[®] DQ12 Series Sensor 

|Sensing Mode|Model<br>1|Range|Connection|Output|
|---|---|---|---|---|
|Performance based on use of 90% refectance white test card.|||||
|**FIXED-FIELD**<br>**VISIBLE RED**<br>Visible red, 645 nm|DQ12AB6FF15|15 mm (0.6 in)<br>cutoff;<br>10 mm (0.4 in)<br>focus|2 m (6.5 ft) cable|Bipolar LO|
||DQ12RB6FF15|||Bipolar DO|
||DQ12AP6FF15Q3||150 mm (6 in) cable with a 3-pin<br>M8/Pico-style QD|1 PNP LO|
||DQ12RP6FF15Q3|||1 PNP DO|
||DQ12AN6FF15Q3|||1 NPN LO|
||DQ12RN6FF15Q3|||1 NPN DO|
||DQ12AB6FF30|30 mm (1.2 in)<br>cutoff;<br>16 mm (0.63 in) focus|2 m (6.5 ft) cable|Bipolar LO|
||DQ12RB6FF30|||Bipolar DO|
||DQ12AP6FF30Q3||150 mm (6 in) cable with a 3-pin<br>M8/Pico-style QD|1 PNP LO|
||DQ12RP6FF30Q3|||1 PNP DO|
||DQ12AN6FF30Q3|||1 NPN LO|
||DQ12RN6FF30Q3|||1 NPN DO|
||DQ12AB6FF50|50 mm (2 in)<br>cutoff; 16 mm (0.63 in) focus|2 m (6.5 ft) cable|Bipolar LO|
||DQ12RB6FF50|||Bipolar DO|
||DQ12AP6FF50Q3||150 mm (6 in) cable with a 3-pin<br>M8/Pico-style QD|1 PNP LO|
||DQ12RP6FF50Q3|||1 PNP DO|
||DQ12AN6FF50Q3|||1 NPN LO|
||DQ12RN6FF50Q3|||1 NPN DO|
||||||



## Indicator Features 

- **1** 1 - Amber and green LEDs • Green on: power to sensor is on • Amber on: received signal 

**==> picture [51 x 132] intentionally omitted <==**

- Amber flashing: marginal signal 

## Wiring 

Emitters have no connection to black and white. 

CAUTION: Observe proper ESD precautions (grounding) when connecting QD models. 

- 1 • To order the 9 m (30 ft) cable model, add the suffix W/30 to the model number. For example, DQ126E W/30 . 

   - To order the 150 mm (6 in) cable with a 4-pin M8/Pico-style (M8 threaded) QD model, add the suffix Q to the model number. For example, DQ126EQ . 

   - To order the 150 mm (6 in) cable with a 4-pin M12/Euro-style QD model, add the suffix Q5 to the model number. For example DQ126EQ5 . 

- 2 Retroreflective range is specified using one model BRT-60X40C retroreflector. Actual sensing range may be more or less than specified, depending upon efficiency and reflective area of the retroreflector(s) used. 

P/N 213155 Rev. A 

www.bannerengineering.com - Tel: + 1 888 373 6767 

2 

WORLD-BEAM[®] DQ12 Series Sensor 

**==> picture [493 x 241] intentionally omitted <==**

**----- Start of picture text -----**<br>
Emitters Bipolar Models, Light Operate PNP Models, Light Operate NPN Models, Light Operate<br>bn (1) bn (1) 10–30 V dc+ bn (1) + bu (3) –<br>bu (3) 10–30 V dc+– bu (3)wh (2)bk (4) LoadLoad – bu (3)bk (4) Load 10–30 V dc– bn (1)bk (4) Load 10–30 V dc+<br>Bipolar Models, Dark Operate PNP Models, Dark Operate NPN Models, Dark Operate<br>bn (1) +<br>bu (3)wh (2) 10–30 V dc– bn (1)bu (3) 10–30 V dc+– bu bn (1)(3) 10–30 V dc–+<br>Load bk (4) Load bk (4) Load<br>bk (4) Load<br>Key 3-pin M8/Pico-style Male QD 4-pin M8/Pico-style Male QD 4-pin M12/Euro-style Male QD<br>1 = Brown<br>2 = White 4 2 4 1<br>3 = Blue 2<br>4 = Black 1 3 1 3 4<br>3<br>**----- End of picture text -----**<br>


## Specifications 

Supply Voltage and Current 

10 to 30 V dc (10% maximum ripple) at 20 mA maximum current 

Sensing Beam Visible red, 645 nm 

Supply Protection Circuitry Protected against reverse polarity and transient voltages 

Output Protection Circuitry 

Protected against false pulse on power-up, short-circuit protected 

Output Response Time 

Opposed Mode: 1.3 ms ON; 900 µs OFF All Other Modes: 850 µs ON/OFF 

120 ms delay on power-up; outputs do not conduct during this time 

Construction 

Polarized Retro Models: Polyamide housing with glass lens All Other Models: Polyamide housing with polycarbonate lens 

## Output Confguration 

Bipolar (1 NPN and 1 PNP) solid-state output or single output (PNP or NPN), light operate (LO) or dark operate (DO), depending on model 

Repeatability 

125 microseconds 

Switching Frequency Opposed Mode: 385 Hz All Other Modes: 590 Hz 

Output Ratings OFF-state leakage current: 

NPN: 10 µA PNP: 10 µA 

ON-state saturation voltage: 

NPN: 2 V at 50 mA PNP: 2 V at 50 mA 

Vibration and Mechanical Shock 

All models meet MIL-STD-202F, Method 201A (Vibration: 10 Hz to 60 Hz maximum, 0.06 inch (1.52 mm) double amplitude, 10G maximum acceleration) requirements. Also meets IEC 60947-5-2 (Shock: 30G 11 ms duration, half sine wave) requirements. 

P/N 213155 Rev. A 

www.bannerengineering.com - Tel: + 1 888 373 6767 

3 

WORLD-BEAM[®] DQ12 Series Sensor 

## Connections 

Standard Models: 2 m (6.5 ft) or 9 m (30 ft) attached PVC cable, or 150 mm (6 in) cable with M8 or M12 threaded connection, depending on the model ordered 

Environmental Rating 

Standard Models: IEC IP67 

Conditions 

Operating Temperature: –20 °C to +55 °C (–4 °F to +131°F) Storage Temperature: –30 °C to +75 °C (–22 °F to +167 °F) 95% at +50 °C maximum relative humidity (non-condensing) 

Certifcations 

Required Overcurrent Protection 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. 

Supply wiring leads < 24 AWG shall not be spliced. 

For additional product support, go to www.bannerengineering.com. 

|Supply Wiring (AWG)|Required Overcurrent Protection (Amps)|
|---|---|
|20|5.0|
|22|3.0|
|24|2.0|
|26|1.0|
|28|0.8|
|30|0.5|



## Dimensions 

**==> picture [426 x 277] intentionally omitted <==**

**----- Start of picture text -----**<br>
12.4 mm<br>(0.49") M3 mounting<br>screws included<br>8.0 mm<br>(0.31")<br>15.0 mm Polarized Retro   4.7 mm<br>(0.59") Models (0.19")<br>5.1 mm Emitter (opposed mode models)<br>23.1 mm (0.20")<br>(0.91") 22 mm<br>(0.86")<br>Emitter (all other models)<br>3.4 mm<br>3.5 mm (0.13")<br>(0.14")<br>Ø 3 mm (0.12")<br>max. torque<br>0.9 Nm (8 in-lbf)<br>**----- End of picture text -----**<br>


P/N 213155 Rev. A 

www.bannerengineering.com - Tel: + 1 888 373 6767 

4 

WORLD-BEAM[®] DQ12 Series Sensor 

## Performance Curves 

**==> picture [504 x 187] intentionally omitted <==**

**----- Start of picture text -----**<br>
Opposed Mode<br>Excess Gain Beam Pattern<br>100000<br>DQ12 E-R.. 150 mm DQ12 E & R.. 5.9"<br>10000 100 mm 3.9"<br>50 mm 2.0"<br>1000<br>0 0<br>100 50 mm 2.0"<br>100 mm 3.9"<br>10<br>150 mm 5.9"<br>1 0 0.5 m  1.0 m  1.5 m  2.0 m  2.5 m  3.0 m  3.5 m<br>0.01 m 0.1 m 1 m 10 m 1.64' 3.28' 4.92' 6.56' 8.20' 9.84' 11.48'<br>0.03' 0.33' 3.3' 33'<br>DISTANCE DISTANCE<br>EXCESS GAIN<br>**----- End of picture text -----**<br>


Retroreflective and polarized retroreflective performance is based on the use of a model BRT-60X40C retroreflector. 

**==> picture [504 x 431] intentionally omitted <==**

**----- Start of picture text -----**<br>
Polarized Retrorefective Retrorefective<br>Excess Gain Beam Pattern Excess Gain Beam Pattern<br>1000 1000<br>DQ12 LP.. DQ12 LV..<br>40 mm 1.6"<br>100 30 mm20 mm DQ12 LP.. 1.2"0.8" 100 60 mm40 mm DQ12 LV.. 2.4"1.6"<br>10 mm 0.4" 20 mm 0.8"<br>0 0 0 0<br>10 mm 0.4" 20 mm 0.8"<br>10 20 mm 0.8" 10 40 mm 1.6"<br>30 mm 1.2" 60 mm 2.4"<br>1 40 mm 0 0.5 m 1.64' 1.0 m 3.28'DISTANCE1.5 m 4.92' 2.0 m 6.56' 2.5 m 8.20'1.6" 1 0 0.5 m 1.64' 1.0 m 3.28' 1.5 m 4.92'DISTANCE2.0 m 6.56' 2.5 m 8.20' 3.0 m 9.84' 11.48'3.5 m<br>0.01 m 0.1 m 1 m 10 m 0.01 m 0.1 m 1 m 10 m<br>0.03' 0.33' 3.3' 33' 0.03' 0.33' 3.3' 33'<br>DISTANCE DISTANCE<br>Fixed-field focus and spot sizes are typical. Performance based on use of 90% reflectance white test card.*<br>Fixed Field -- 15 mm Fixed Field -- 30 mm Fixed Field -- 50 mm<br>1000 1000 1000<br>Q12..FF15DQ12.. F15 DQ12..FF30 DQ12..FF50<br>100 100<br>100<br>10 10<br>10<br>1 1<br>1 1 mm 10 mm 100 mm 1000 mm 1 mm 10 mm 100 mm 1000 mm<br>1 mm 10 mm 100 mm 1000 mm 0.04" 0.4" 4.0" 40.0" 0.04" 0.4" 4.0" 40.0"<br>0.04" 0.4" 4.0" 40.0" DISTANCE DISTANCE<br>DISTANCE<br>Standard Models: Standard Models: Standard Models:<br>• Ø 0.5 mm spot size at 7 mm focus • Ø 1 mm spot size at 15 mm focus • Ø 1 mm spot size at 15 mm focus<br>• Ø 1.5 mm spot size at 15 mm cutoff • Ø 2.5 mm spot size at 30 mm cutoff • Ø 4 mm spot size at 50 mm cutoff<br>* Using 18% gray test card:  cutoff distance will be * Using 18% gray test card:  cutoff distance will be<br>95% of value shown.  * Using 18% gray test card:  cutoff distance will be 80% of value shown.<br>Using 6% black test card:  cutoff distance will be 90% of value shown.  Using 6% black test card: Using 6% black test card:  cutoff distance will be<br>90% of value shown. cutoff distance will be 80% of value shown. 60% of value shown.<br>EXCESS GAIN EXCESS GAIN<br>EXCESS GAIN EXCESS GAIN EXCESS GAIN<br>**----- End of picture text -----**<br>


P/N 213155 Rev. A 

www.bannerengineering.com - Tel: + 1 888 373 6767 

5 

WORLD-BEAM[®] DQ12 Series Sensor 

## Accessories 

## Cordsets 

|3-Pin Threaded M8/Pico-Style Cordsets<br>CC~~—OC“CN”SCNC#d~~<br>~~a~~|3-Pin Threaded M8/Pico-Style Cordsets<br>CC~~—OC“CN”SCNC#d~~<br>~~a~~|3-Pin Threaded M8/Pico-Style Cordsets<br>CC~~—OC“CN”SCNC#d~~<br>~~a~~|3-Pin Threaded M8/Pico-Style Cordsets<br>CC~~—OC“CN”SCNC#d~~<br>~~a~~|3-Pin Threaded M8/Pico-Style Cordsets<br>CC~~—OC“CN”SCNC#d~~<br>~~a~~|
|---|---|---|---|---|
|Model<br>CC<br>~~a~~|Length<br>|Style<br>|Dimensions<br>|Pinout (Female)<br>|
|PKG3M-2<br>~~a~~|2 m (6.56 ft)|Straight|**ø 9.5**<br>**35 Typ.**<br>**M8 x 1**<br>~~me~~<br>~~ae~~|**4**<br>**3**<br>**1**<br>1 = Brown<br>3 = Blue<br>4 = Black<br>~~e~~|
|PKG3M-5<br>PKG3M-7|5 m (16.40 ft)<br>7 m (22.97 ft)||||
|PKG3M-7<br>PKG3M-9|7 m (22.97 ft)<br>9 m (29.53 ft)||||
|PKG3M-10|10 m (32.81 ft)||||
|PKW3M-2|2 m (6.56 ft)|Right-Angle|**ø 9.5**<br>**28 Typ.**<br>**20 Typ.**<br>**M8 x 1**<br>~~ae~~<br>I~~e=m~~<br>~~+H~~||
|PKW3M-5|5 m (16.40 ft)||||
|PKW3M-9|9 m (29.53 ft)||||



|4-Pin Threaded M8/Pico-Style Cordsets—Single Ended<br>CC~~—COC“CNSNCSCCd~~|4-Pin Threaded M8/Pico-Style Cordsets—Single Ended<br>CC~~—COC“CNSNCSCCd~~|4-Pin Threaded M8/Pico-Style Cordsets—Single Ended<br>CC~~—COC“CNSNCSCCd~~|4-Pin Threaded M8/Pico-Style Cordsets—Single Ended<br>CC~~—COC“CNSNCSCCd~~|4-Pin Threaded M8/Pico-Style Cordsets—Single Ended<br>CC~~—COC“CNSNCSCCd~~|
|---|---|---|---|---|
|Model<br>CC<br>~~a~~|Length<br><br>~~a~~|Style<br><br>~~a~~|Dimensions<br><br>~~a~~|Pinout (Female)<br><br>~~a~~|
|PKG4M-2<br>~~a~~|2 m (6.56 ft)<br>~~a~~|Straight<br>~~a~~|**ø 9.5**<br>**35 Typ.**<br>**M8 x 1**<br>~~a~~<br>~~SmBe~~|**4**<br>**3**<br>**1**<br>**2**<br>1 = Brown<br>2 = White<br>3 = Blue<br>4 = Black<br>~~a~~<br>~~e~~|
|PKG4M-5|5 m (16.4 ft)||||
|PKG4M-9|9 m (29.5 ft)||||
|PKW4M-2|2 m (6.56 ft)|Right Angle|**ø 9.5**<br>**28 Typ.**<br>**20 Typ.**<br>**M8 x 1**<br>~~Be~~<br>~~a~~<br>~~=~~<br>~~+~~||
|PKW4M-5|5 m (16.4 ft)||||
|PKW4M-9|9 m (29.5 ft)||||



|4-Pin Threaded M12/Euro-Style Cordsets—Single Ended<br>CC~~r™—C(NCONC#d~~|4-Pin Threaded M12/Euro-Style Cordsets—Single Ended<br>CC~~r™—C(NCONC#d~~|4-Pin Threaded M12/Euro-Style Cordsets—Single Ended<br>CC~~r™—C(NCONC#d~~|4-Pin Threaded M12/Euro-Style Cordsets—Single Ended<br>CC~~r™—C(NCONC#d~~|4-Pin Threaded M12/Euro-Style Cordsets—Single Ended<br>CC~~r™—C(NCONC#d~~|
|---|---|---|---|---|
|Model<br>CC<br>~~a~~|Length<br><br>~~a~~|Style<br><br>~~a~~|Dimensions<br><br>~~a~~|Pinout (Female)<br><br>~~a~~|
|MQDC-406<br>~~a~~|1.83 m (6 ft)<br>~~a~~|Straight<br>~~a~~|**44 Typ.**<br>**ø 14.5**<br>**M12 x 1**<br>~~a~~<br><or~~y~~|**2**<br>**3**<br>**4**<br>**1**<br>1 = Brown<br>2 = White<br>3 = Blue<br>4 = Black<br>~~a~~|
|MQDC-415|4.57 m (15 ft)||||
|MQDC-430|4.57 m (15 ft)<br>9.14 m (30 ft)||||
|MQDC-450|9.14 m (30 ft)<br>15.2 m (50 ft)||||
|MQDC-406RA|1.83 m (6 ft)|Right-Angle|**32 Typ.**<br>**[1.26"]**<br>**30 Typ.**<br>**[1.18"]**<br>**ø 14.5 [0.57"]**<br>**M12 x 1**<br>n~~g!~~<br>~~a~~||
|MQDC-415RA|4.57 m (15 ft)||||
|MQDC-430RA|9.14 m (30 ft)||||
|MQDC-450RA|15.2 m (50 ft)||||



P/N 213155 Rev. A 

www.bannerengineering.com - Tel: + 1 888 373 6767 

6 

WORLD-BEAM[®] DQ12 Series Sensor 

## Brackets 

**==> picture [460 x 97] intentionally omitted <==**

**----- Start of picture text -----**<br>
SMBQ12T 4 X SMBQ12A<br>• Right-angle bracket Ø3.3 • Adjustable right-angle Ø3.3<br>• 20-ga. 300 series stainless bracket<br>steel 2 X  • 20-ga. 300 series stainless<br>34 Ø3.2 steel 34 Ø3.2<br>é 11 34 é 11 34<br>Hole center spacing:  A to B = 7.6 Hole center spacing:  A to B = 7.6<br>Hole size:  A = 3.5 x 8.1, B=ø 3.2 Hole size:  A = 3.5 x 8.1, B=ø 3.2<br>**----- End of picture text -----**<br>


## Apertures 

Opposed-mode sensors (standard models only) may be fitted with apertures to narrow or shape the sensor’s effective beam to more closely match the size or profile of the objects being sensed. A common example is the use of “line” (or “slot”) type apertures to sense thread. 

Note: The use of apertures will reduce the sensing range (see table below). 

|Model|Description|Pieces|Reduced Sensor Range<br>(Two Apertures Used)||
|---|---|---|---|---|
|Circular||||~~eI)~~<br>~~eee~~|
|APQ12-.5<br>~~eI)~~|0.5 mm (0.02 in) diameter<br>~~eI)~~|10<br>~~eI)~~|60 mm (2.4 in)<br>~~eI)~~||
|APQ12-1<br>~~eI)~~|1 mm (0.04 in) diameter<br>~~eI)~~|10<br>~~eI)~~|190 mm (7.5 in)<br>~~eI)~~||
|APQ12-1.5<br>~~eI)~~|1.5 mm (0.06 in) diameter<br>~~eI)~~|10<br>~~eI)~~|400 mm (15.7 in)<br>~~eI)~~||
|APQ12-2<br>~~eI)~~|2 mm (0.08 in) diameter<br>~~eI)~~|10<br>~~eI)~~|725 mm (28.5 in)<br>~~eI)~~||
|Horizontal Slot<br>~~eI)~~|||||
|APQ12-.5H<br>~~eI)~~|0.5 mm (0.02 in)<br>~~eI)~~|10<br>~~eI)~~|350 mm (13.8 in)<br>~~eI)~~||
|APQ12-1H<br>~~eI)~~<br>~~ee~~|1 mm (0.04 in)<br>~~eI)~~<br>~~ee~~|10<br>~~eI)~~<br>~~ee~~|725 mm (28.5 in)<br>~~eI)~~<br>~~ee~~||
|Vertical Slot<br>~~eI)~~<br>~~ee~~|||||
|APQ12-.5V<br>~~ee~~|0.5 mm (0.02 in)<br>~~ee~~|10<br>~~ee~~|450 mm (17.7 in)<br>~~ee~~||
|APQ12-1V<br>~~ee~~|1 mm (0.04 in)<br>~~ee~~|10<br>~~ee~~|900 mm (35.4 in)<br>~~ee~~||
|Protective Jacket<br>~~ee~~|||||
|APQ12-4S<br>~~ee~~|4 mm (0.16 in) square<br>~~ee~~|10<br>~~ee~~|2000 mm (78.7 in)<br>~~ee~~||
|APKQ12<br>~~ee~~|Kit containing two of each aperture<br>above<br>~~ee~~|18<br>~~ee~~|—<br>~~ee~~||



## Banner Engineering Corp. Limited Warranty 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

P/N 213155 Rev. A 

www.bannerengineering.com - Tel: + 1 888 373 6767 

7 

WORLD-BEAM[®] DQ12 Series Sensor 

## FCC Part 15 and CAN ICES-3 (B)/NMB-3(B) 

This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 

1. This device may not cause harmful interference, and 

2. This device must accept any interference received, including interference that may cause undesired operation. 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

- Consult the manufacturer. 

© Banner Engineering Corp. All rights reserved