DP-0501-11A

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **DP-0501-11A Datasheet** 

## **1 Introduction** 

## **1.1 Features** 

The DP-0501-11A is a 5-inch TFT-LCD module with a resolution of 800 × 480 pixels. It integrates a TFT-LCD panel, driver ICs (ILI6122 and ILI5960), flexible printed circuit (FPC), backlight unit, and a resistive touch panel (RTP). 

Designed to deliver 16.7 million colors through an RGB interface, the DP-0501-11A offers high-quality visual performance and reliable operation. 

- 5.0" TFT-LCD with 800 × 480 resolution and resistive touch panel (RTP) 

- Supports 16.7M colors for vivid and accurate display output 

- RGB interface for reliable signal transmission 

- Compliant with RoHS environmental requirements 

Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Bridgetek Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device, or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Bridgetek Pte Ltd, 1 Tai Seng Avenue, #0305, Singapore 4536464. Singapore Registered Company Number: 201542387H 

Copyright © Bridgetek Pte Ltd 

1 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **2 Part Numbers/Ordering Information** 

|**Part No.**|**Description**|
|---|---|
|DP-0501-11A|TFT Display5 inch(800*480 resolution)with Resistive Touch Panel|
||**Table 1 - Part Number/Ordering Information**|



Copyright © Bridgetek Pte Ltd 

2 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

|**Table of Contents**|
|---|
|**1** **Introduction ............................................................1**|
|**1.1**<br>**Features ......................................................................... 1**|
|**2** **Part Numbers/Ordering Information ......................2**|
|**3** **General Specifications .............................................5**|
|**4** **Hardware Description .............................................6**|
|**4.1**<br>**TFT-LCD Interface Pin Assignment ................................. 6**|
|**5** **Specifications ..........................................................8**|
|**5.1**<br>**Absolute Maximum Ratings ............................................ 8**|
|5.1.1<br>Electrical Absolute Maximum Ratings .............................................. 8|
|5.1.2<br>Environmental Absolute Maximum Ratings ...................................... 8|
|**5.2**<br>**Electrical Specifications .................................................. 8**|
|5.2.1<br>Electrical Characteristics ............................................................... 8|
|5.2.2<br>LED Backlight Specification ............................................................ 9|
|**5.3**<br>**Timing Chart ................................................................ 10**|
|5.3.1<br>Horizontal Input Timing ............................................................... 10|
|5.3.2<br>Vertical Input Timing ................................................................... 10|
|**5.4**<br>**Optical Specifications ................................................... 11**|
|**6** **Reliability Test Items ............................................ 14**|
|**7** **Dimension ............................................................. 15**|
|**8** **Disclaimer Notice: Use of Third-Party Software or**|
|**Websites ................................................................... 16**|
|**9** **Warranty Statement ............................................. 17**|
|**10**<br>**Contact Information ........................................... 18**|
|**Appendix A – References ........................................... 19**|
|**Document References ........................................................... 19**|
|**Acronyms and Abbreviations ................................................ 19**|
|**Appendix B – List of Tables & Figures........................ 20**|



Copyright © Bridgetek Pte Ltd 

3 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

**List of Tables ........................................................................ 20 List of Figures ....................................................................... 20 Appendix C – Revision History ................................... 21** 

Copyright © Bridgetek Pte Ltd 

4 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **3 General Specifications** 

|**Item**|**Specification**|**Unit**|
|---|---|---|
|LCD Type|TFT|-|
|LCD Size|5|inch|
|Numberof Pixels|800(H)x 480(V)|pixels|
|ViewingDirection|12|o’clock|
|Gray Scale Inversion Direction|6|o’clock|
|Interface|24-bit RGB||
|Display Colors|16.7MColors (RGB8 bit)|colors|
|Module Size|120.70(H)x 75.80(V)x 4.30(D)|mm|
|Active Area|108.00(H) x 64.80(V)|mm|
|DisplayDriver IC|ILI6122&ILI5960|-|
|Touch Panel|Resistive Touch Panel|-|
|Operation Temperature|-20~+70°C|°C|
|Storage Temperature|-30~+80°C|°C|



**Note:** Complies with environmental protection requirements and is RoHS compliant. 

Copyright © Bridgetek Pte Ltd 

5 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **4 Hardware Description** 

The DP-0501-11A features a 5-inch TFT-LCD with an 800 × 480 resolution, integrated with a resistive touch panel. 

## **4.1 TFT-LCD Interface Pin Assignment** 

The interface connector pin configuration is described below. 

|**Pin no**|**Symbol**|**Type **|**Description**|
|---|---|---|---|
|1|VLED-|P|LED backlight(Cathode)|
|2|VLED+|P|LED backlight (Anode)|
|3|GND|P|Ground|
|4|VCC|P|Power Supply|
|5|R0|I|Red Data Input|
|6|R1|I|Red Data Input|
|7|R2|I|Red Data Input|
|8|R3|I|Red Data Input|
|9|R4|I|Red Data Input|
|10|R5|I|Red Data Input|
|11|R6|I|Red Data Input|
|12|R7|I|Red Data Input|
|13|G0|I|Green Data Input|
|14|G1|I|Green Data Input|
|15|G2|I|Green Data Input|
|16|G3|I|Green Data Input|
|17|G4|I|Green Data Input|
|18|G5|I|Green Data Input|
|19|G6|I|Green Data Input|
|20|G7|I|Green Data Input|
|21|B0|I|Blue Data Input|
|22|B1|I|Blue Data Input|
|23|B2|I|Blue Data Input|
|24|B3|I|Blue Data Input|
|25|B4|I|Blue Data Input|
|26|B5|I|Blue Data Input|
|27|B6|I|Blue Data Input|
|28|B7|I|Blue Data Input|
|29|GND|P|Ground|
|30|PCLK|I|Data Clock|
|31|DISP|I|Normal Displayand StandbyMode selectpin|
|32|HSYNC|I|Line Sync Signal|
|33|VSYNC|I|Frame Sync Signal|
|34|DE|I|Data Enable Pin|
|35|NC|-|No Connection|



Copyright © Bridgetek Pte Ltd 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

|36|GND|P|Ground|
|---|---|---|---|
|37|XR|O|Touch Panel Control Pin|
|38|YD|O|Touch Panel Control Pin|
|39|XL|O|Touch Panel Control Pin|
|40|YU|O|Touch Panel Control Pin|



**Table 3 - TFT-LCD Interface Pin Definition** 

Copyright © Bridgetek Pte Ltd 

7 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **5 Specifications** 

## **5.1 Absolute Maximum Ratings** 

## **5.1.1 Electrical Absolute Maximum Ratings** 

Condition: VSS=0V, Ta=25°C 

|Condition: VSS=0V, Ta=25°CSS=0V, Ta=25°C=0V, Ta=25°C0V, Ta=25°Ca=25°C=25°C25°C°CC|Condition: VSS=0V, Ta=25°CSS=0V, Ta=25°C=0V, Ta=25°C0V, Ta=25°Ca=25°C=25°C25°C°CC|||||||
|---|---|---|---|---|---|---|---|
|**Item **|||**Symbol **|**MIN.**|**MAX.**|**Unit**|**Note**|
|Power Supply Voltage|||VCC|-0.3|3.6|V|Note 1, 2|
|**Table 4 - Electrical Absolute Maximum Ratings**|**Table 4 - Electrical Absolute Maximum Ratings**|**Table 4 - Electrical Absolute Maximum Ratings**||||||



## **Note:** 

1. Permanent damage to the LCD module may occur if operated beyond the specified limits. Operation beyond the specified electrical characteristics may lead to malfunction or reduced reliability. 

2. VCC must always be greater than Vss. 

## **5.1.2 Environmental Absolute Maximum Ratings** 

|**Item**|**Storage**|**Storage**|**Operating**|**Operating**|**Note**|
|---|---|---|---|---|---|
||**MIN.**|**MAX.**|**MIN.**|**MAX.**||
|AmbientTemperature|-30°C|80°C|-20°C|70°C|Note 1,2|
|Humidity|-|-|-|-|Note 3|



**Table 5 - Environmental Absolute Maximum Ratings** 

## **Note:** 

1. Response time decreases at low operating temperatures. 

2. Background color may vary slightly with ambient temperature; this phenomenon is reversible. 

3. Ta<=40°C: 85%RH MAX 

Ta>=40°C: Absolute humidity must not exceed the equivalent of 85% RH at 40°C. 

## **5.2 Electrical Specifications** 

## **5.2.1 Electrical Characteristics** 

Condition: Vss=0V, Ta=25°C 

|**Item**|**Item**|**Symbol**|**Min.**|**Typ.**|**Max.**|**Unit**|**Note**|
|---|---|---|---|---|---|---|---|
|Power Supply||VCC|3.0|3.3|3.6|V||
|Input<br>Voltage|‘H’|VIH|0.7* Vcc|-|Vcc|V|Vcc=3.3V|
||‘L’|VIL|0|-|0.3*Vcc|V|Vcc=3.3V|
|Current Consumption||Icc1|-|20|30|mA|Normal mode,<br>Note 1|
|||Icc2|-|0.05|0.1|mA|Sleep mode,<br>Note1|



**Table 6 - Electrical Characteristics** 

## **Note:** 

1. Tested in 1x1 chessboard pattern. 

Copyright © Bridgetek Pte Ltd 

8 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **5.2.2 LED Backlight Specification** 

The backlight consists of 18 white LEDs arranged in a 6 × 3 matrix, providing uniform illumination across the display. 

|**Item**|**Symbol**|**Min.**|**Typ. **|**Max.**|**Unit**|**Condition**|
|---|---|---|---|---|---|---|
|SupplyVoltage|Vf|-|18|-|V|If=20x3mA|
|Forward Current|If|-|60|-|mA||



**Table 7 - LED Backlight Specification** 

**Figure 1 - Forward Current vs Ambient Temperature** 

**Note:** The forward current shown in Figure 1 is specified per LED string. 

**Figure 2 - Backlight LED Circuit** 

Copyright © Bridgetek Pte Ltd 

9 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## «y . «*N BridgetekBRIDGING TECHNOLOGY 

## **5.3 Timing Chart** 

## **5.3.1 Horizontal Input Timing** 

**Figure 3 - Horizontal Input Timing** 

|**Parameter**|**Parameter**|**Symbol**|**Min.**|**Typ.**|**Max.**|**Unit**|
|---|---|---|---|---|---|---|
|Horizontal Display Area||tHD|-|800|-|CLKIN|
|CLKIN Frequency||FCLK|-|33.3|50|MHz|
|1 Horizontal Line Period||tH|862|1056|1200|CLKIN|
|HSD Pulse Width||tHPW|1|-|40|CLKIN|
|HSD Back Porch|SYNC|tHBP|46|46|46|CLKIN|
|HSD Front Porch|SYNC|tHFP|16|210|354|CLKIN|



**Table 8 - Horizontal Input Timing** 

## **5.3.2 Vertical Input Timing** 

**Figure 4 - Vertical Input Timing** 

|**Parameter**|**Symbol**|**Min.**|**Typ.**|**Max.**|**Unit**|
|---|---|---|---|---|---|
|Vertical Display Area|tVD|-|480|-|HSD|
|VSD Period time|tV|510|525|650|HSD|
|VSD Pulse Width|tVPW|1|-|20|HSD|
|VSD Back Porch|tVBP|23|23|23|HSD|
|VSD Front Porch|tVFP|7|22|147|HSD|



**Table 9 - Vertical Input Timing** 

Copyright © Bridgetek Pte Ltd 

10 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **5.4 Optical Specifications** 

All optical specifications are measured under typical condition (Note 1, 2) 

**==> picture [451 x 280] intentionally omitted <==**

**----- Start of picture text -----**<br>
Poi Item  ees Symbol Condition  ee Min.  Typ.  Max.  Unit  Note<br>Brightness  Bp -  400  -  Cd/m [2 ] Note 1<br>θ =0°<br>Note 1<br>Uniformity  ⊿ Bp  Ф=0°  75  -  -  %<br>SO Note 2<br>3:00  -  60  -<br>| ee<br>6:00  -  45  -<br>Viewing Angle  | Cr≥10  ee e ee Deg  Note 3<br>9:00  -  60  -<br>| ee e e eee<br>12:00  -  60  -<br>| ee e ee<br>Contrast Ratio  Cr  300  500  -  -  Note 4<br>ee ee a eeee ee ee ee<br>θ =0°<br>Response Time  Tr  Ф=0°  -  10  -  ms  Note 5<br>Tf -  10  -  ms<br>RR| ee eeSS ee ee<br>x  0.28  -<br>W<br>y  0.33  -<br>of| | || |||<br>R  X  0.51  -<br>y  0.34  -<br>Color of CIE Coordinate =|| θ =0°  | |[|| Note 1<br>G  x  0.31  -<br>Ф=0°  Note 6<br>y  0.56  -<br>oi| | || || |<br>B  x  0.15  -<br>y  0.14  -<br>Si | |<br>NTSC Ratio  S  50  60  -  %<br>ee ee| | ee | ee ee||ee<br>**----- End of picture text -----**<br>


**Table 10 - Optical Specifications** 

**Remark:** _**Parameters may vary slightly depending on temperature, driving voltage, and material.**_ 

## **Note:** 

1. Data are measured after the LEDs are turned on for 5 minutes with the LCM displaying full white. Brightness is the average value of 9 measured points. Measurement equipment: PR705 (Ф8mm) 

Measuring Conditions: 

- Environment: Dark room 

- Temperature: Ta=25 **°** C 

- Operating voltage adjusted for optimum contrast at the center of the display 

- Values measured at the center point of the LCD panel after more than 5 minutes of backlight operation 

**Figure 5 - Measurement Setup** 

Copyright © Bridgetek Pte Ltd 

11 

**DP-0501-11A Datasheet** 

**Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

2. The luminance uniformity is calculated using the following formula: 

**==> picture [109 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
𝐁𝐩 (𝐌𝐢𝐧.)<br>⊿ Bp = x 100%<br>𝐁𝐩 (𝐌𝐚𝐱.)<br>**----- End of picture text -----**<br>


Bp (Max.) = Maximum brightness in 9 measured spots Bp (Min.) = Minimum brightness in 9 measured spots 

**Figure 6 - Measurement Point** 

3. Definition of viewing angle: Refer to the figure below, indicated by θ and Ф. 

**Figure 7 - Viewing Angle** 

4. Definition of Contrast ratio. (Test equipment: DMS501) 

**Figure 8 - Contrast Ratio** 

𝐁𝐫𝐢𝐠𝐡𝐭𝐧𝐞𝐬𝐬 𝐨𝐟 𝐬𝐞𝐥𝐞𝐜𝐭𝐞𝐝 𝐝𝐨𝐭𝐬 Contrast ratio, Cr = 𝐁𝐫𝐢𝐠𝐡𝐭𝐧𝐞𝐬𝐬 𝐨𝐟 𝐧𝐨𝐧−𝐬𝐞𝐥𝐞𝐜𝐭𝐞𝐝 𝐝𝐨𝐭𝐬 

Copyright © Bridgetek Pte Ltd 

12 

KY«*N 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

5. Definition of response time. (Test equipment: DMS501) 

The output signals of the photo detector are measured when the input signal changes from “black” to “white” (falling time) and from “white” to “black” (rising time). Response time is defined as the time interval between 10% and 90% of the signal amplitude. Refer to the figure below for illustration. 

**Figure 9 - Definition of Response Time** 

6. Definition of color in terms of CIE coordinates and NTSC ratio. 

**==> picture [251 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
𝐀𝐫𝐞𝐚 𝐨𝐟 𝐑𝐆𝐁 𝐭𝐫𝐢𝐚𝐧𝐠𝐥𝐞<br>Color gamut:  S = x 100%<br>𝐀𝐫𝐞𝐚 𝐨𝐟 𝐍𝐓𝐒𝐂 𝐭𝐫𝐢𝐚𝐧𝐠𝐥𝐞<br>**----- End of picture text -----**<br>


**Figure 10 - 1931 CIE Chromaticity Diagram** 

7. Definition of cross talk. 

**==> picture [307 x 41] intentionally omitted <==**

**----- Start of picture text -----**<br>
|𝐏𝐚𝐭𝐭𝐞𝐫𝐧 𝐀 𝐁𝐫𝐢𝐠𝐡𝐭𝐧𝐞𝐬𝐬−𝐏𝐚𝐭𝐭𝐞𝐫𝐧 𝐁 𝐁𝐫𝐢𝐠𝐡𝐭𝐧𝐞𝐬𝐬|<br>Cross talk ratio(%)= x 100%<br>𝐏𝐚𝐭𝐭𝐞𝐫𝐧 𝐀 𝐁𝐫𝐢𝐠𝐡𝐭𝐧𝐞𝐬𝐬<br>Electric volume value=3F+/-3Hex<br>**----- End of picture text -----**<br>


**Figure 11 - Definition of Cross Talk** 

Copyright © Bridgetek Pte Ltd 

13 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **6 Reliability Test Items** 

**==> picture [441 x 362] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Test Item|Test Conditions|Criterion|
|Temperature: +80°C±2°C|
|Duration: 96hrs|
|High Temperature Storage|
|Restoration: 2hrs at 25°C|
|Power Status: OFF|
|Temperature: -30°C±2°C|
|Duration: 96hrs|
|Low Temperature Storage|
|Restoration: 2hrs at 25°C|
|Power Status: OFF|
|Temperature: +70°C±2°C|
|1.No cosmetic or|
|Duration: 96hrs|
|High Temperature Operation|electrical defects|
|Restoration: 2hrs at 25°C|
|shall be observed|
|Power Status: ON|
|after testing.|
|Temperature: -20°C±2°C|
|Duration: 96hrs|
|Low Temperature Operation|2.Total current|
|Restoration: 4hrs at 25°C|
|consumption shall|
|Power Status: ON|
|not exceed twice|
|Temperature: +60°C±2°C|
|the initial value.|
|High Temperature and|Humidity:90% RH|
|Humidity Operation|Duration: 96hrs|
|Power Status: ON|
|Range: -30°C ~ +80°C|
|Cycle: 5 cycle|
|Dwell: 30 min at each extreme|
|Temperature Cycle|
|Transfer Time:|≤|5 min|
|Restoration: 2hrs at 25°C|
|Power Status: OFF|
|Frequency: 10Hz ~ 150Hz|
|Vibration Test|Acceleration: 100m/s|[2]|
|Cosmetic and|
|Duration: 120min|
|electrical defects|
|Waveform: Half-sine wave|
|are not permitted.|
|Shock Test|Acceleration:300m/s|[2]|
|Duration:11ms|

**----- End of picture text -----**<br>


**Table 11 - Reliability Test Items** 

**Note:** Operation : Supply 3.3 V to the logic system. 

The inspection criteria after reliability testing are as follows: 

**==> picture [172 x 60] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Item|Inspection|
|Contrast|CR > 50%|
|IDD|IDD < 200%|
|Brightness|Brightness > 60%|
|Color Tone|Color Tone ±0.05|

**----- End of picture text -----**<br>


Copyright © Bridgetek Pte Ltd 

14 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **7 Dimension** 

**Figure 12 - LCM Dimension** 

Copyright © Bridgetek Pte Ltd 

15 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **8 Disclaimer Notice: Use of Third-Party Software or Websites** 

We may recommend use of software or web sites that are owned or operated by other companies. We offer or facilitate this recommendation by hyperlinks or other methods to aid your access to the third-party resource. While we endeavour to direct you to helpful, trustworthy resources, we cannot endorse, approve, or guarantee software, information, products, or services provided by or at a thirdparty resource or track changes in the resource. Thus, we are not responsible for the content or accuracy of any third-party resource or for any loss or damage of any sort resulting from the use of, or for any failure of, products or services provided at or from a third party resource. 

We recommend these resources on an “as is” basis. When you use a third party resource, you will be subject to its terms and licenses and no longer be protected by our privacy policy or security practices, which may differ from the third policy or practices or other terms. You should familiarize yourself with any license or use terms of, and the privacy policy and security practices of, the third party resource, which will govern your use of that resource. 

Copyright © Bridgetek Pte Ltd 

16 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **9 Warranty Statement** 

According to our after-sales policy, the warranty (if applicable) will be void under the following circumstances: 

- The device has been damaged due to human factors, such as dropping, impact, water exposure, or unauthorized disassembly/modification. 

- The device has malfunctioned due to improper use, mishandling, or usage beyond its intended design. 

- The device has been disassembled, repaired, or modified by unauthorized personnel. 

- Any other conditions that do not comply with our warranty policy. For details, please contact our sales team. 

Copyright © Bridgetek Pte Ltd 

17 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **10 Contact Information** 

Refer to https://brtchip.com/contact-us/ for contact information. 

## **Distributor and Sales Representatives** 

Please visit the Distribution Network – IC & Module (brtchip.com) page for the contact details of our distributor(s) and sales representative(s) in your country. 

System and equipment manufacturers and designers are responsible to ensure that their systems, and any Bridgetek Pte Ltd (BRTChip) devices incorporated in their systems, meet all applicable safety, regulatory and system-level performance requirements. All application-related information in this document (including application descriptions, suggested Bridgetek devices and other materials) is provided for reference only. While Bridgetek has taken care to assure it is accurate, this information is subject to customer confirmation, and Bridgetek disclaims all liability for system designs and for any applications assistance provided by Bridgetek. Use of Bridgetek devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold harmless Bridgetek from any and all damages, claims, suits, or expense resulting from such use. This document is subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor any part of the information contained in, or the product described in this document, may be adapted, or reproduced in any material or electronic form without the prior written consent of the copyright holder. Bridgetek Pte Ltd, 1 Tai Seng Avenue, Tower A, #03-05, Singapore 536464. Singapore Registered Company Number: 201542387H. 

Copyright © Bridgetek Pte Ltd 

18 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **Appendix A – References** 

## **Document References** 

NA 

## **Acronyms and Abbreviations** 

|**Terms**|**Description**|
|---|---|
|FPC|Flexible Printed Circuit|
|IC|Integrated Circuit|
|I2C|Inter-Integrated Circuit|
|LCD|Liquid Crystal Display|
|LCM|Liquid Crystal Module|
|LED|Light Emitting Diode|
|LEDA|Light Emitting Diode Anode|
|LEDK|Light Emitting Diode Cathode|
|RTP|Resistive Touch Panel|
|TFT|Thin Film Transistor|



Copyright © Bridgetek Pte Ltd 

19 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **Appendix B – List of Tables & Figures** 

## **List of Tables** 

|Table 1 - Part Number/Ordering Information ..................................................................... 2|Table 1 - Part Number/Ordering Information ..................................................................... 2|
|---|---|
|Table 2 - General Specifications ...................................................................................... 5|Table 2 - General Specifications ...................................................................................... 5|
|Table 3 - TFT-LCD Interface Pin Definition ........................................................................ 7|Table 3 - TFT-LCD Interface Pin Definition ........................................................................ 7|
|Table 4 - Electrical Absolute Maximum Ratings .................................................................. 8|Table 4 - Electrical Absolute Maximum Ratings .................................................................. 8|
|Table 5 - Environmental Absolute Maximum Ratings .......................................................... 8|Table 5 - Environmental Absolute Maximum Ratings .......................................................... 8|
|Table 6 - Electrical Characteristics ................................................................................... 8|Table 6 - Electrical Characteristics ................................................................................... 8|
|Table 7 - LED Backlight Specification ............................................................................... 9|Table 7 - LED Backlight Specification ............................................................................... 9|
|Table 8 - Horizontal Input Timing ................................................................................... 10|Table 8 - Horizontal Input Timing ................................................................................... 10|
|Table 9 - Vertical Input Timing ....................................................................................... 10|Table 9 - Vertical Input Timing ....................................................................................... 10|
|Table 10 - Optical Specifications ..................................................................................... 11|Table 10 - Optical Specifications ..................................................................................... 11|
|Table 11 - Reliability Test Items ..................................................................................... 14|Table 11 - Reliability Test Items ..................................................................................... 14|



## **List of Figures** 

|**List of Figures**|**List of Figures**|
|---|---|
|Figure 1 - Forward Current vs Ambient Temperature .......................................................... 9|Figure 1 - Forward Current vs Ambient Temperature .......................................................... 9|
|Figure 2 - Backlight LED Circuit ....................................................................................... 9|Figure 2 - Backlight LED Circuit ....................................................................................... 9|
|Figure 3 - Horizontal Input Timing .................................................................................. 10|Figure 3 - Horizontal Input Timing .................................................................................. 10|
|Figure 4 - Vertical Input Timing ...................................................................................... 10|Figure 4 - Vertical Input Timing ...................................................................................... 10|
|Figure 5 - Measurement Setup ....................................................................................... 11|Figure 5 - Measurement Setup ....................................................................................... 11|
|Figure 6 - Measurement Point ........................................................................................ 12|Figure 6 - Measurement Point ........................................................................................ 12|
|Figure 7 - Viewing Angle ............................................................................................... 12|Figure 7 - Viewing Angle ............................................................................................... 12|
|Figure 8 - Contrast Ratio ............................................................................................... 12|Figure 8 - Contrast Ratio ............................................................................................... 12|
|Figure 9 - Definition of Response Time ............................................................................ 13|Figure 9 - Definition of Response Time ............................................................................ 13|
|Figure 10 - 1931 CIE Chromaticity Diagram ..................................................................... 13|Figure 10 - 1931 CIE Chromaticity Diagram ..................................................................... 13|
|Figure 11 - Definition of Cross Talk ................................................................................. 13|Figure 11 - Definition of Cross Talk ................................................................................. 13|
|Figure 12 - LCM Dimension ............................................................................................ 15|Figure 12 - LCM Dimension ............................................................................................ 15|



Copyright © Bridgetek Pte Ltd 

20 

**DP-0501-11A Datasheet Version 1.0** 

Document Reference No.: BRT_000499   Clearance No.: BRT#264 

## **Appendix C – Revision History** 

Document Title: DP-0501-11A Datasheet 

Document Reference No.: BRT_000499 Clearance No.: BRT#264 - Product Page: https://brtchip.com/product category/products/ Document Feedback: Send Feedback 

|**Revision**|**Changes**|**Date**|
|---|---|---|
|Version 1.0|Initial Release|07-11-2025|



Copyright © Bridgetek Pte Ltd 

21