DMT035QVNXNT0-1A

## **TFT DISPLAY MODULE** _Product Specification_ 

|Customer|Customer|Standard||
|---|---|---|---|
|Product<br>Number||DMT035QVNXNT0-1A||
|Customer Part|Customer Part|||
|Number||||
|Customer<br>Approval|Customer||**Date:**|



|Internal Approvals|Internal Approvals|Internal Approvals|
|---|---|---|
|Product Mgr|Doc. Control|Electr. Eng|
|Luo Luo|Luo Luo|Eric Wan|
|**Date: 30/06/17**|**Date: 30/06/17**|**Date:  30/06/17**|



## Revision Record 

|Rev.|Date|Page|Chapt.|Comment|ECR no.|
|---|---|---|---|---|---|
|1.0|26-May-17|All|All|Initial Release||
|2.0|30-June-17|9|3.3.1|Improve brightness:<br>Modified Backlight pinout<br>arrangement||
|||16|4.1|Modified Colour Chromaticity<br>values||
|||||||
|||||||
|||||||
|||||||
|||||||



**Product N[o] : DMT035QVNXNT0-1A REV.2.0** ©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

2 of 28 

## Table of Contents 

|**1.0**|**MAIN FEATURES ................................................................................................... 5**|
|---|---|
|**2.0**|**MECHANICAL SPECIFICATION ............................................................................... 6**|
|**2.1 Mechanical Characteristics ....................................................................................................................... 6**||
|**2.2 Mechanical Drawing ................................................................................................................................. 7**||
|**3.0**|**ELECTRICAL SPECIFICATION .................................................................................. 8**|
|**3.1 Absolute Maximum Ratings ..................................................................................................................... 8**||
|**3.2 Electrical Characteristics........................................................................................................................... 8**||
|**3.3 Interface Pin Assignment ......................................................................................................................... 9**||
|3.3.1|TFT Pin Assignment ................................................................................................................................. 9|
|**3.4 Timing Characteristics ............................................................................................................................ 11**||
|3.4.1|Display Parallel Interface Timing Characteristics (8080 system) .......................................................... 11|
|3.4.2|Display Serial Interface Timing Characteristics (3-line SPI system)....................................................... 13|
|3.4.3|Parallel RGB Interface Timing Characteristics ....................................................................................... 14|
|3.4.4|Reset Timing Characteristics ................................................................................................................. 16|
|**4.0**|**OPTICAL SPECIFICATION ..................................................................................... 17**|
|**4.1 Optical Characteristics............................................................................................................................ 17**||
|4.1.1|Test Method .......................................................................................................................................... 18|
|**5.0**|**BACKLIGHT SPECIFICATION ................................................................................. 19**|
|**5.1 LED**|**Driving Conditions ........................................................................................................................... 19**|
|**5.2 LED**|**Circuit .............................................................................................................................................. 19**|
|**6.0**|**QUALITY ASSURANCE SPECIFICATION ................................................................. 20**|
|**6.1 Delivery Inspection Standards ................................................................................................................ 20**||
|6.1.1|Inspection Conditions ........................................................................................................................... 20|
|6.1.2|Environmental Conditions .................................................................................................................... 20|
|6.1.3|Sampling Conditions ............................................................................................................................. 20|
|6.1.4|Definition of Area .................................................................................................................................. 21|
|6.1.5|Basic Principle ....................................................................................................................................... 21|
|6.1.6|Inspection Criteria ................................................................................................................................. 22|
|6.1.7|Classification of Defects ........................................................................................................................ 26|
|6.1.8|Identification / marking criteria ............................................................................................................ 26|



**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

3 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

|**6.2 Dealing with Customer Complaints ........................................................................................................ 26**|**6.2 Dealing with Customer Complaints ........................................................................................................ 26**|
|---|---|
|6.2.1|Non-conforming analysis ...................................................................................................................... 26|
|6.2.2|Handling of non-conforming displays ................................................................................................... 26|
|**7.0**|**RELIABILITY SPECIFICATION ................................................................................ 27**|
|**7.1 Reliability Tests ...................................................................................................................................... 27**||
|**8.0**|**HANDLING PRECAUTIONS .................................................................................. 28**|



**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

4 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 1.0 Main Features 

|Item|Contents|
|---|---|
|Screen Size|3.5” Diagonal|
|Display Format|240 x RGB x 320 Dots|
|N° of Colour|65K/262K|
|Active Area|53.28 mm (H) x 71.04 mm (V)|
|LCD Type|TFT|
|Mode|IPS Transmissive / Normally Black|
|Viewing Direction|Full view|
|Interface|8/16/18-bit DBI Type B (CPU) interface<br>3-lines SPI +16/18-bit RGB interface;<br>3-lines SPI|
|Driver IC|HX8347A or equivalent|
|Backlight Type|LED|
|Operating Temperature|-30°C ~ +85°C|
|Storage Temperature|-40°C ~ +90°C|
|RoHS compliant|Yes|



**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

5 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 2.0 Mechanical Specification 

## **2.1 Mechanical Characteristics** 

|Item|Characteristic|Unit|
|---|---|---|
|Display Format|240 x RGB x 320 Dots|Dots|
|Overall Dimensions|63.00 mm (H) x 85.00 mm (V) x 3.0 mm (D)|mm|
|Active Area|53.28 mm (H) x 71.04 mm (V)|mm|
|pixel Pitch|222 (H) x 222 (V)|µm|
|Weight|20|g|



**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

6 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## **2.2 Mechanical Drawing** 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

7 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 3.0 Electrical Specification 

## **3.1 Absolute Maximum Ratings** 

|Item|Symbol|Condition|Min|Max|Unit|Note|
|---|---|---|---|---|---|---|
|Power Supply Voltage|VCI||-0.3|4.0|V||
|Digital Interface Supply<br>Voltage|IOVCC||-0.3|4.0|V||
|Operating Temperature|TOP||-30|85|°C|1|
|Storage Temperature|TST||-40|90|°C|1,2,3|



**Note 1.** 90 % RH Max for Ta<50 °C, and 60% RH for Ta≥50°C. 

- **Note 2.** In case of below 0°C, the response time of liquid crystal (LC) becomes slower and the colour of panel becomes darker than normal one. Level of retardation depends on temperature, because of LC's characteristic. 

- **Note 3.** Only operation is guaranteed at operating temperature. Contrast, response time, another display quality are evaluated at +25°C. 

## **3.2 Electrical Characteristics** 

|Item|Symbol|Condition|Min|Typ|Max|Unit|Note|
|---|---|---|---|---|---|---|---|
|Supply Voltage|VCI|Ta=25˚C|2.5|2.8|3.3|V||
|Digital Interface Supply<br>Voltage|IOVCC|Ta=25˚C|1.65|1.8|3.3|V||
|Input Voltage for Logic|VIH||0.7<br>IOVCC|-|IOVCC|V||
||VIL||GND|-|0.3<br>IOVCC|V||
|Output Voltage for Logic|VOH||0.8<br>IOVCC|-|IOVCC|V||
||VOL||GND|-|0.2<br>IOVCC|V||
|Current Consumption|IDD||-|9||mA|1|



**Note 1:** The specified power consumption is under the conditions of VCI=2.8V, FV=60Hz. 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

8 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## **3.3 Interface Pin Assignment** 

## 3.3.1 TFT Pin Assignment 

Recommended connector: MOLEX 51296-5093 

|No.|Symbol|Function|
|---|---|---|
|1|GND|Ground.|
|2|XR(NC)|NC.|
|3|YD(NC)|NC.|
|4|XL(NC)|NC.|
|5|YU(NC)|NC.|
|6|BS0|Interface selecting mode signal. MPU Parallel interface bus and<br>serial interface select if use RGB interface must select serial<br>interface.|
|7|BS1||
|8|BS2||
|9|NRESET|This signal will reset the device and must be applied to properly<br>initialize the chip|
|10|VSYNC|Frame synchronizing signal for RGB Interface mode.<br>If not used, please connect to GND or IOVCC.|
|11|HSYNC|Line synchronizing signal for RGB Interface mode.<br>If not used, please connect to GND or IOVCC.|
|12|PCLK|Pixel clock signal for RGB Interface mode.<br>If not used, please connect to GND or IOVCC.|
|13|DE|A DATA ENABLE signal for RGB Interface mode.<br>If not used, please connect to GND or IOVCC.|
|14-31|DB17-DB0|Data bus PINS.<br>18-bit bi-directional data bus for MCU system and RGB interface<br>mode.<br>8-bit bus: use DB7-DB0 and D17-D8 unused<br>16-bit bus: use DB15-DB0 and D17-16 unused<br>18-bit bus: use DB17-DB0<br>Pins not used must be connected to GND.|
|32|SDO|Serial data output pin in serial bus system interface.<br>If not used, please open thispin.|
|33|SDI|Serial input signal. The data is applied on the rising edge of the<br>SCL signal. If not used,fix thispin at GND or IOVCC.|
|34|NRD|Serves as a read signal and read data at the rising edge.<br>If not used, please connect to GND or IOVCC.|
|35|NWR|Serves as a write signal and write data at the rising edge.<br>If not used, please connect to GND or IOVCC.|



**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

9 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

|No.|Symbol|Function|
|---|---|---|
|36|DNC_SCL|When under serial interface, it servers as SCL.|
|37|NCS|Chip select signal.<br>Low: chip can be accessed;<br>High: chip cannot be accessed.<br>If not used, please connect to GND.|
|38-39|VCI|Supply voltage (VCI=3.3V).|
|40|IOVCC|Supply voltage for IO (IOVCC=1.8V-3.3V).|
|41|NC|Not connected|
|42-44|LEDK1-LEDK3|Power supply for Backlight.|
|45|NC|Not connected|
|46-48|LEDA1-LEDA3|Power supply for Backlight.|
|49|NC|Not connected|
|50|GND|Ground.|



**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

10 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## **3.4 Timing Characteristics** 

Please refer to Himax IC HX8347A datasheet for more information 

## 3.4.1 Display Parallel Interface Timing Characteristics (8080 system) 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

11 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

12 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 3.4.2 Display Serial Interface Timing Characteristics (3-line SPI system) 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

13 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 3.4.3 Parallel RGB Interface Timing Characteristics 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

14 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

15 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 3.4.4 Reset Timing Characteristics 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

16 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 4.0 Optical Specification 

## **4.1 Optical Characteristics** 

Measuring instruments: LCD-5100, Eldim, Topcon BM-7 Driving condition: VCI = 3.3V, VSS = 0V Backlight: IF=40mA Measured temperature: Ta ＝ 25 ゜ C 

|Item|Item|Symbol|Condition|Min|Typ|Max|Unit|Note|
|---|---|---|---|---|---|---|---|---|
|Response Time||TR+TF|θ=Ф=0°<br>Normal Viewing<br>Angle|||||2|
|||||-|35|45|ms||
||||||||||
|Contrast Ratio||CR||600|800|-||3|
|Viewing Angle|Left|θL|CR ≥ 10|-|80|-|deg|4|
||Right|θR||-|80|-|deg||
||Up|φU||-|80|-|deg||
||Down|φD||-|80|-|deg||
|Colour Chromaticity|Red|Rx|CR ≥ 10|0.618|0.620|0.622|-|5|
|||Ry||0.338|0.340|0.342|-||
||Green|Gx||0.328|0.346|0.366|-||
|||Gy||0.604|0.624|0.644|-||
||Blue|Bx||0.129|0.149|0.169|-||
|||By||0.033|0.035|0.037|-||
||White|Wx||0.302|0.342|0.382|-||
|||Wy||0.319|0.359|0.399|-||
|Centre Brightness||||450|500|-|cd/m²|6|
|Brightness Distribution||||80|-|-|%|7|



**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

17 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 4.1.1 Test Method 

|Note|Item|Test Method|
|---|---|---|
|1|Setup|The display should be stabilised at a given temperature for 30 minutes to avoid abrupt<br>temperature change during measuring. In order to stabilise the luminance, measurements<br>should be executed after lighting the backlight for 30 minutes in a windless room.<br>Display<br>LCD Panel<br>Photometer<br>Center of the Sereen<br>(TOPCONBM-7Fast)<br>|<br>FieldofView=22<br>LightShieldRoom<br>500 mm<br>(Ambient Luminance < 41 lux)|
|2|Response time|Measure output signal waveform by the luminance meter when raster of window pattern is<br>changed from white to black and from black to white.<br>White<br>Black<br>White<br>White<br>100%<br>90%<br>10%<br>0%<br>Black<br>TON<br>TOFF|
|3|Contrast ratio|Measure maximum brightness and minimum brightness at the centre of the screen by<br>displaying raster or window pattern. Then calculate the ratio between these two values.<br>Brightness of unselected position (white)<br>Contrast Ratio (CR)  =<br>Brightness of selectedposition(black)|
|4|Viewing angle<br>Horizontal θ<br>Vertical Ø|Move the luminance meter from right to left and up and down and determinate the angles<br>where contrast ratio is 10<br>8=o=0°<br>oD<br>ou<br>eR<q<br>lock<br>9 o'clock<br>-<br><“£<br>12 o’cloc<br>o’cloc<br>x<br>.<br>t<br>:|<br>y+<br>et<br>SOL Py<br>7 rn<br>4 Se<br>6 o'clock<br>=a<br>y<br>“y+<br>3o’clock|
|5|Colour<br>chromaticity|Measure chromaticity coordinates x and y of CIE1931 colorimetric system|
|6|Centre<br>brightness|Measure the brightness at the centre of the screen|
|7|Brightness<br>distribution|(Brightness distribution) = 100 x B/A %<br>A: max. brightness of the 9 points<br>B: min. brightness of the 9points|



**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

18 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 5.0 Backlight Specification 

## **5.1 LED Driving Conditions** 

|Item|Symbol|Condition|Min|Typ|Max|Unit|
|---|---|---|---|---|---|---|
|Forward Current|IF|Ta=25 °C|30|40|-|mA|
|Forward Voltage|VF|Ta= 25°C||16||V|
|LED life time|Hr||||50k|hour|



Note: 

- The lifetime of the LED is defined as a period till the brightness of the LED decreases to the half of its initial value. 

- This figure is given as a reference purpose only, and not a guarantee. 

- This figure is estimated for an LED operating alone. The performance of an LED may differ when assembled as a monitor together with a TFT panel due to different environmental temperature. 

- Estimated lifetime could vary on a different temperature and usually higher temperature could reduce the life significantly. 

## **5.2 LED Circuit** 

## LED Circuit Drawing 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** ©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

19 of 28 

## 6.0 Quality Assurance Specification 

## **6.1 Delivery Inspection Standards** 

## 6.1.1 Inspection Conditions 

Inspection distance:  30 cm ± 2 cm Viewing angle: ±45° 

## 6.1.2 Environmental Conditions 

Ambient temperature: 25°C ±5°C Ambient humidity: 65±10% RH Ambient illumination: 300~700 lux 

## 6.1.3 Sampling Conditions 

1. Lot size: quantity of shipment lot per model 

2. Sampling method: 

|No<br>~~—————~~|Items to be<br>inspected<br>~~—————~~|Criteria<br>~~—————~~|Classification<br>of defects|
|---|---|---|---|
|1<br>~~—————~~<br>~~{of~~|Functional<br>defects<br>~~—————~~<br>~~{of~~|1) No display, Open or miss line<br>2) Display abnormally, Short<br>3) Backlight no lighting, abnormal lighting.<br>4)TP no function<br>~~—————~~<br>~~{of~~|Major<br>~~{of~~|
|2<br>~~{of~~|Missing<br>~~{of~~|Missingcomponent<br>~~{of~~||
|3<br>~~{of~~<br>~~jf}~~|Outline<br>dimension<br>~~{of~~<br>~~jf}~~|Overall outline dimension beyond the<br>drawingis not allowed<br>~~{of~~<br>~~jf}~~||
|4<br>~~jf}~~|Color tone<br>~~jf}~~|Color unevenness, refer to limited sample<br>~~jf}~~|Minor<br>~~ee~~|
|5<br>~~jf}~~<br>~~a~~|Spot Line defect<br>~~jf}~~<br>~~a~~|Light dot，Dim spot,Polarizer  Bubble ;<br>Polarizer accidented spot.<br>~~jf}~~<br>~~ee~~||
|6<br>~~a~~<br>~~i~~|Soldering<br>appearance<br>~~a~~<br>~~i~~|Good soldering , Peeling off is not allowed.<br>~~ee~~||



**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

20 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 6.1.4 Definition of Area 

A zone: active area B zone: viewing area 

## 6.1.5 Basic Principle 

A set of sample to indicate the limit of acceptable quality level shall be discussed should a dispute occur. 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

21 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 6.1.6 Inspection Criteria 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

22 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

23 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

24 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

25 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 6.1.7 Classification of Defects 

Visual defects (except no or wrong label) are treated as minor defects, while electrical defects are treated as major defects. 

Two minor defects are equal to one major defect in lot sampling inspection. 

## 6.1.8 Identification / marking criteria 

Any unit with illegible / wrong / double or no marking / label shall be rejected. 

## **6.2 Dealing with Customer Complaints** 

## 6.2.1 Non-conforming analysis 

Purchaser should supply Densitron with detailed data of non-conforming sample. After accepting it, Densitron should complete the analysis in two weeks from receiving the sample. 

If the analysis cannot be completed on time, Densitron must inform the purchaser. 

## 6.2.2 Handling of non-conforming displays 

If any non-conforming displays are found during customer acceptance inspection which Densitron is clearly responsible for, return them to Densitron. 

Both Densitron and customer should analyse the reason and discuss the handling of nonconforming displays when the reason is not clear. 

Equally, both sides should discuss and come to agreement for issues pertaining to modification of Densitron quality assurance standard. 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

26 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 7.0 Reliability Specification 

## **7.1 Reliability Tests** 

||Test Item|Test Condition|Test Condition|Sample Size|
|---|---|---|---|---|
|Durability Test|High Temperature<br>Operation|Ta= 70˚C|96h|3pcs|
||Low Temperature<br>Operation|Ta=-20˚C|96h|3pcs|
||Temperature Cycle<br>Operation|-20°C70°C ON/OFF, 20 cycles.<br>ON time over 10 seconds, OFF time<br>over 10 seconds||3pcs|
||High Temperature<br>Storage|Tp= 80°C|96h|3pcs|
||Low Temperature<br>Storage|Tp= -30°C|96h|3pcs|
||ESD Test|150pF, 330Ω, ±6KV (Contact)/±8KV<br>(Air),5 Points/panel,10 times/point||3pcs|
||Thermal Shock<br>Resistance|The sample should be allowed to<br>stand the following 5 cycles of<br>operation: LTS for 30 minutes -><br>normal temperature for 5 minutes -><br>HTS for 30 minutes -> normal<br>temperature for 5 minutes, as one<br>cycle, then taking it out and drying it<br>at normal temperature, and allowing<br>it stand for 24 hours||3pcs|
||Box Drop Test|1 Corner 3 Edges 6 faces, 66 cm<br>(Medium Box)||1 box|



Note: Ta=ambient temperature Tp= Panel temperature 

Notes: 

1. No dew condensation to be observed. 

2. The function test shall be conducted after 4 hours storage at the normal temperature and humidity after removed from the test chamber. 

3. No cosmetic or functional defects should be allowed. 

4. Total current consumption should be less than twice the initial value. 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

27 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data 

## 8.0 Handling Precautions 

## _**Safety**_ 

If the LCD panel breaks, be careful not to get the liquid crystal fluid in your mouth or in your eyes. If the liquid crystal touches your skin or clothes, wash it off immediately using soap and plenty of water. 

## _**Mounting and Design**_ 

Place a transparent plate (e.g. acrylic, polycarbonate or glass) on the display surface to protect the display from external pressure. Leave a small gap between the transparent plate and the display surface. 

When assembling with a zebra connector, clean the surface of the pads with alcohol and keep the surrounding air very clean. 

Design the system so that no input signal is given unless the power supply voltage is applied. 

## _**Caution during LCD cleaning**_ 

Lightly wipe the display surface with a soft cloth soaked with Isopropyl alcohol, Ethyl alcohol or Trichlorotriflorothane. 

Do not wipe the display surface with dry or hard materials that will damage the polariser surface. Do not use aromatic solvents (toluene and xylene), or ketonic solvents (ketone and acetone). 

## _**Caution against static charge**_ 

As the display uses C-MOS LSI drivers, connect any unused input terminal to VDD or VSS. Do not input any signals before power is turned on. Also, ground your body, work/assembly table and assembly equipment to protect against static electricity. 

## _**Packaging**_ 

Displays use LCD elements, and must be treated as such. Avoid strong shock and drop from a height. To prevent displays from degradation, do not operate or store them exposed directly to sunshine or high temperature/humidity. 

## _**Caution during operation**_ 

It is indispensable to drive the display within the specified voltage limit since excessive voltage shortens its life. Direct current causes an electrochemical reaction with remarkable deterioration of the display quality. Give careful consideration to prevent direct current during ON/OFF timing and during operation. Response time is extremely delayed at temperatures lower than the operating temperature range while, at high temperatures, displays become dark. However, this phenomenon is reversible and does not mean a malfunction or a display that has been permanently damaged. If the display area is pushed on hard during operation, some graphics will be abnormally displayed but returns to a normal condition after turning off the display once. Even a small amount of condensation on the contact pads (terminals) can cause an electro-chemical reaction which causes missing rows and columns. Give careful attention to avoid condensation. 

## _**Storage**_ 

Store the display in a dark place where the temperature is 25°C ± 10°C and the humidity below 50%RH. Store the display in a clean environment, free from dust, organic solvents and corrosive gases. Do not crash, shake or jolt the display (including accessories). 

**Product N[o] : DMT035QVNXNT0-1A REV.2.0** 

28 of 28 

©2017 Densitron Technologies Limited. All rights reserved. Proprietary data